Small RNA SmsR1 modulates acidogenicity and cariogenic virulence by affecting protein acetylation in Streptococcus mutans.

Post-transcriptional regulation by small RNAs and post-translational modifications (PTM) such as lysine acetylation play fundamental roles in physiological circuits, offering rapid responses to environmental signals with low energy consumption. Yet, the interplay between these regulatory systems remains underexplored. Here, we unveil the cross-talk between sRNAs and lysine acetylation in Streptococcus mutans, a primary cariogenic pathogen known for its potent acidogenic virulence. Through systematic overexpression of sRNAs in S. mutans, we identified sRNA SmsR1 as a critical player in modulating acidogenicity, a key cariogenic virulence feature in S. mutans. Furthermore, combined with the analysis of predicted target mRNA and transcriptome results, potential target genes were identified and experimentally verified. A direct interaction between SmsR1 and 5'-UTR region of pdhC gene was determined by in vitro binding assays. Importantly, we found that overexpression of SmsR1 reduced the expression of pdhC mRNA and increased the intracellular concentration of acetyl-CoA, resulting in global changes in protein acetylation levels. This was verified by acetyl-proteomics in S. mutans, along with an increase in acetylation level and decreased activity of LDH. Our study unravels a novel regulatory paradigm where sRNA bridges post-transcriptional regulation with post-translational modification, underscoring bacterial adeptness in fine-tuning responses to environmental stress.

A Near-Infrared Photothermal-Responsive Underwater Adhesive with Tough Adhesion and Antibacterial Properties.

Developing tunable underwater adhesives that possess tough adhesion in service and easy detachment when required remains challenging. Herein, a strategy is proposed to design a near infrared (NIR) photothermal-responsive underwater adhesive by incorporating MXene (Ti3C2Tx)-based nanoparticles within isocyanate-modified polydimethylsiloxane (PDMS) polymer chains. The developed adhesive exhibits long-term and tough adhesion with an underwater adhesion strength reaching 5.478 MPa. Such strong adhesion is mainly attributed to the covalent bonds and hydrogen bonds at the adhesive-substrate interface. By making use of the photothermal-response of MXene-based nanoparticles and the thermal response of PDMS-based chains, the adhesive possesses photothermal-responsive performance, exhibiting sharply diminished adhesion under NIR irradiation. Such NIR-triggered tunable adhesion allows for easy and active detachment of the adhesive when needed. Moreover, the underwater adhesive exhibits photothermal antibacterial property, making it highly desirable for underwater applications. This work enhances the understanding of photothermal-responsive underwater adhesion, enabling the design of tunable underwater adhesives for biomedical and engineering applications.

Ion-tunable antiambipolarity in mixed ion-electron conducting polymers enables biorealistic organic electrochemical neurons.

Biointegrated neuromorphic hardware holds promise for new protocols to record/regulate signalling in biological systems. Making such artificial neural circuits successful requires minimal device/circuit complexity and ion-based operating mechanisms akin to those found in biology. Artificial spiking neurons, based on silicon-based complementary metal-oxide semiconductors or negative differential resistance device circuits, can emulate several neural features but are complicated to fabricate, not biocompatible and lack ion-/chemical-based modulation features. Here we report a biorealistic conductance-based organic electrochemical neuron (c-OECN) using a mixed ion-electron conducting ladder-type polymer with stable ion-tunable antiambipolarity. The latter is used to emulate the activation/inactivation of sodium channels and delayed activation of potassium channels of biological neurons. These c-OECNs can spike at bioplausible frequencies nearing 100 Hz, emulate most critical biological neural features, demonstrate stochastic spiking and enable neurotransmitter-/amino acid-/ion-based spiking modulation, which is then used to stimulate biological nerves in vivo. These combined features are impossible to achieve using previous technologies.

SMU_1361c regulates the oxidative stress response of Streptococcus mutans.

Dental caries is the most common chronic infectious disease around the world and disproportionately affects the marginalized socioeconomic group. Streptococcus mutans, considered a primary etiological agent of caries, depends on the coordinated physiological response to tolerate the oxidative stress generated by commensal species within dental plaque, which is a critical aspect of its pathogenicity. Here, we identified and characterized a novel tetracycline repressor family regulator, SMU_1361c, which appears to be acquired by the bacteria via horizontal gene transfer. Surprisingly, smu_1361c functions as a negative transcriptional regulator to regulate gene expression outside its operon and is involved in the oxidative stress response of S. mutans. The smu_1361c overexpression strain UA159/pDL278-1361c was more susceptible to oxidative stress and less competitive against hydrogen peroxide generated by commensal species Streptococcus gordonii and Streptococcus sanguinis. Transcriptomics analysis revealed that smu_1361c overexpression resulted in the significant downregulation of 22 genes, mainly belonging to three gene clusters responsible for the oxidative stress response. The conversed DNA binding motif of SMU_1361c was determined by electrophoretic mobility shift and DNase I footprinting assay with purified SMU_1361c protein; therefore, smu_1361c is directly involved in gene transcription related to the oxidative stress response. Crucially, our finding provides a new understanding of how S. mutans deals with the oxidative stress that is required for pathogenesis and will facilitate the development of new and improved therapeutic approaches for dental caries.IMPORTANCEStreptococcus mutans is the major organism associated with the development of dental caries, which globally is the most common chronic disease. To persist and survive in biofilms, S. mutans must compete with commensal species that occupy the same ecological niche. Here, we uncover a novel molecular mechanism of how tetracycline repressor family regulator smu_1361c is involved in the oxidative stress response through transcriptomics analysis, electrophoretic mobility shift assay, and DNase I footprinting assay. Furthermore, we demonstrated that smu_1361c mediates S. mutans sensitivity to oxidative stress and competitiveness with commensal streptococci. Therefore, this study has revealed a previously unknown regulation between smu_1361c and genes outside its operon and demonstrated the importance of smu_1361c in the oxidative stress response and the fitness of S. mutans within the plaque biofilms, which can be exploited as a new therapy to modulate ecological homeostasis and prevent dental caries.

Efficacy of a mouthwash containing ε-poly-L-lysine, funme peptides and domiphen in reducing halitosis and supragingival plaque: a randomized clinical trial.

OBJECTIVE: To evaluate the antibacterial effectiveness of a combination of ε-poly-L-lysine (ε-PL), funme peptide (FP) as well as domiphen against oral pathogens, and assess the efficacy of a BOP® mouthwash supplemented with this combination in reducing halitosis and supragingival plaque in a clinical trial. MATERIALS AND METHODS: The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of the compound against Fusobacterium nucleatum, Porphyromonas gingivalis, Streptococcus mutans, and Aggregatibacter actinomycetemcomitans were determined by the gradient dilution method. Subsequently, the CCK-8 assay was used to detect the toxicity of mouthwash on human gingival fibroblastst, and the effectiveness in reducing halitosis and supragingival plaque of the mouthwash supplemented with the combination was analyzed by a randomized, double-blind, parallel-controlled clinical trial. RESULTS: The combination exhibited significant inhibitory effects on tested oral pathogens with the MIC < 1.56% (v/v) and the MBC < 3.13% (v/v), and the mouthwash containing this combination did not inhibit the viability of human gingival fibroblasts at the test concentrations. The clinical trial showed that the test group displayed notably lower volatile sulfur compounds (VSCs) at 0, 10, 24 h, and 7 d post-mouthwash (P < 0.05), compared with the baseline. After 7 days, the VSC levels of the and control groups were reduced by 50.27% and 32.12%, respectively, and notably cutting severe halitosis by 57.03% in the test group. Additionally, the Plaque Index (PLI) of the test and control group decreased by 54.55% and 8.38%, respectively, and there was a significant difference in PLI between the two groups after 7 days (P < 0.01). CONCLUSIONS: The combination of ε-PL, FP and domiphen demonstrated potent inhibitory and bactericidal effects against the tested oral pathogens, and the newly formulated mouthwash added with the combination exhibited anti-dental plaque and anti-halitosis properties in a clinical trial and was safe. TRIAL REGISTRATION: The randomized controlled clinical trial was registered on Chinese Clinical Trial Registry (No. ChiCTR2300073816, Date: 21/07/2023).

Atomistic insight into the binding mode and self-regulation mechanism of IsPETase towards PET substrates with different polymerization degrees.

Poly(ethylene terephthalate) (PET) is one of the most widely used synthetic polyesters, however, its extensive use creates a long-term environmental burden. Unlike traditional recycling methods, biodegradation is a sustainable strategy. The emergence of PETase from Ideonella sakaiensis 201-F6 (IsPETase) has brought great potential for the industrialization of degradable PET. In this work, models of enzyme-substrate complexes with different degrees of polymerization were established to study the binding mode using molecular dynamics simulation. We found that the whole binding site can be further subdivided into three parts, including head, middle and tail binding regions. Most importantly, the presence of the middle region formed by both ends of Ser93 and Ser236 provides a potential possibility for the binding of substrates with different chain lengths, and exerts the self-regulation ability of enzymes to accommodate substrates. Meanwhile, the 'pocket bottom' Arg280 in the tail region echoes the 'pocket mouth' Trp185 in the head region, defining the substrate binding region. This work reveals the self-regulation of IsPETase, as well as the key residues for the substrate binding. The solution to these problems enables us to better understand the function of enzymes and design high-performance degradation enzymes, which is of great significance for industrial application research.

Aquapteridospora jiangxiensis, a new aquatic hyphomycetous fungus from a freshwater habitat in China.

During an investigation of freshwater fungi in Jiangxi province, China, a new hyphomycetous fungus, Aquapteridospora jiangxiensis, was collected and isolated. Aquapteridospora jiangxiensis is characterized by its unbranched and guttulate conidiophores with multi-septa swollen at the base, polyblastic conidiogenous cells with sympodial proliferations, and denticles, and guttulate conidia with a sheath. A photo plate of the macro- and micro-morphology and a muti-loci (ITS, LSU, SSU, TEF1 and RPB2) phylogenetic tree are provided. A key to the species of Aquapteridospora is also presented in this paper.

H2O2-Responsive amphiphilic polymer with aggregation-induced emission (AIE) for DOX delivery and tumor therapy.

Stimuli-responsive drug delivery systems (DDSs) based on amphiphilic polymers have attracted much attention. In this study, we reported an innovative H2O2-responsive amphiphilic polymer (TBP), bearing a H2O2-sensitive phenylboronic ester, AIE fluorophore tetraphenylethene (TPE) hydrophobic, and polyethylene glycol hydrophilic (PEG) moieties. TBP could self-assemble into micelles with an encapsulation efficiency as high as 74.9% for doxorubicin (DOX) in aqueous solution. In the presence of H2O2, TBP micelles was decomposed by oxidation, hydrolysis and rearrangement, leading to almost 80% DOX release from TBP@DOX micelles. TBP and the corresponding degradation products were biocompatible, while TBP@DOX micelles only displayed obvious toxicity toward cancer cells. Drug delivery process was clearly monitored by confocal laser scanning microscopic (CLSM) and flow cytometry (FCM) analysis. Moreover, in vivo anticancer study showed that TBP@DOX micelles were accumulated in tumor region of nude mice and effectively inhibited tumor growth. The results suggested that the reported H2O2-responsive amphiphilic polymer displayed great potential in drug delivery and tumor therapy.

Candida albicans CHK1 gene regulates its cross-kingdom interactions with Streptococcus mutans to promote caries.

The cross-kingdom interactions between Candida albicans and Streptococcus mutans have played important roles in early childhood caries (ECC). However, the key pathways of C. albicans promoting the cariogenicity of S. mutans are still unclear. Here, we found that C. albicans CHK1 gene was highly upregulated in their dual-species biofilms. C. albicans chk1Δ/Δ significantly reduced the synergistical growth promotion, biofilm formation, and exopolysaccharides (EPS) production of S. mutans, the key cariogenic agent, compared to C. albicans wild type (WT) and CHK1 complementary strains. C. albicans WT upregulated the expressions of S. mutans EPS biosynthesis genes gtfB, gtfC, and gtfD, and their regulatory genes vicR and vicK, but chk1Δ/Δ had no effects. Both C. albicans WT and chk1Δ/Δ failed to promote the biofilm formation and EPS production of S. mutans ΔvicK and antisense-vicR strains, indicating that C. albicans CHK1 upregulated S. mutans vicR and vicK to increase the EPS biosynthesis gene expression, then enhanced the EPS production and biofilm formation to promote the cariogenicity. In rat caries model, the coinfection with chk1Δ/Δ and S. mutans decreased the colonization of S. mutans and developed less caries especially the severe caries compared to that from the combinations of S. mutans with C. albicans WT, indicating the essential role of C. albicans CHK1 gene in the development of dental caries. Our study for the first time demonstrated the key roles of C. albicans CHK1 gene in dental caries and suggested that it may be a practical target to reduce or treat ECC. KEY POINTS: • C. albicans CHK1 gene is important for its interaction with S. mutans. • CHK1 regulates S. mutans two-component system to promote its cariogenicity. • CHK1 gene regulates the cariogenicity of S. mutans in rat dental caries.

Occurrence and Characteristics of Microplastics Contamination in Different Intensive Aquaculture Systems Nearby the Yangtze Estuary, China.

Microplastics (MPs) pollution has been extensively investigated in natural fishery waters, but studies on intensive aquaculture systems are scarce. Here, the occurrence and properties of MPs were investigated and compared between four different aquaculture systems nearby the Yangtze Estuary. The average MPs concentration was in order of recirculating aquaculture system (RAS, 1.67 particles/L) < aquarium (2.47 particles/L) < cement pond (10.09 particles/L) < earthen pond (13.81 particles/L). Compared to fragment MPs, fiber was the more abundant shape in aquarium (85.88%), RAS (77.61%) and earthen pond (68.13%). A total of six colors were found in four systems. The black MPs accounted for 56.86% and 47.45% in aquarium and RAS system, respectively. The high proportion of blue MPs was found in cement pond (37.65%) and earthen pond (40%). The most MPs sizes observed in the four systems were 43% of 50-300 µm MPs in aquarium; 44% and 30.19% of 300-1000 µm MPs in RAS and cement pond, respectively; and 30.19% of 3000-5000 µm MPs in earthen pond. For polymers, polypropylene occupied 47.83% in aquarium and RAS, 41.46% in cement pond and 27.79% in earthen pond. Proportion of rayon was highest in RAS (60.87%) and 34.04% of nylon was found in earthen pond. These results could provide scientific reference for further traceability and removal of MPs in different aquaculture systems.

Nanometer-Scale Force Profiles of Short Single- and Double-Stranded DNA Molecules on a Gold Surface Measured Using a Surface Forces Apparatus.

Using a surface forces apparatus (SFA), we have studied the nanomechanical behavior of short single-stranded and partially and fully double-stranded DNA molecules attached via one end to a self-assembled monolayer on a gold surface. Our results confirm the previously proposed "mushroom-like" polymer structure for surface-attached, single-stranded DNA at low packing density and a "brush-like" structure for the same construct at higher density. At low density we observe a transition to "rigid rod" behavior upon addition of DNA complementary to the surface-attached single strand as the fraction of molecules that are double-stranded increases, with a concomitant increase in the SFA-observed thickness of the monolayer and the characteristic length of the observed repulsive forces. At higher densities, in contrast, this transition is effectively eliminated, presumably because the single-stranded state is already extended in its "brush" state. Taken together, these studies offer insights into the structure and physics of surface-attached short DNAs, providing new guidance for the rational design of DNA-modified functional surfaces.

Metformin Hydrochloride Encapsulation by Alginate Strontium Hydrogel for Cartilage Regeneration by Reliving Cellular Senescence.

Cartilage lesion is a common tissue defect and is challenging in clinical practice. Trauma-induced cellular senescence could decrease the chondrocyte capability of maintaining cartilage tissue regeneration. A previous investigation showed that, by controlling the cellular senescence, the cartilage regeneration can be significantly accelerated. Based on this finding, we design a novel hydrogel, Alg/MH-Sr, that combines metformin, an established drug for inhibiting senescence, and strontium, an effective anti-inflammatory material for cartilage tissue engineering. A RT-PCR test suggests the significant inhibitory effect of the hydrogel on senescent, apoptotic, oxidative, and inflammatory genes' expression. Histological examinations demonstrate that the Alg/MH-Sr hydrogel accelerated cartilage repairment, and chondrocyte senescence was significantly inhibited. Our study demonstrates that the Alg/MH-Sr hydrogel is effective for cartilage defect treatment and provides a new clue in accelerating tissue repairment by inhibiting the senescence of cells and tissues.

Molecularly imprinted polymer based microtiter chemiluminescence array for determination of phenothiazines and benzodiazepines in pork.

In this study, a molecularly imprinted polymer based chemiluminescence array capable of simultaneous determining phenothiazines and benzodiazepines was first reported. Two polymers were coated in different wells of the conventional 96-well microtiter plate as the recognition reagents, and the added analytes competed with a horseradish peroxidase-labeled bi-hapten conjugate to bind the recognition reagents. The light signal was induced by using a highly effective luminol-H2O2-IMP system. The assay procedure consisted of only one sample-loading step prior to data acquisition. Then, the array was used to determine 4 phenothiazines and 5 benzodiazepines in pork simultaneously. The limits of detection for the 9 drugs were in a range of 0.001-0.01 ng/mL, and the recoveries from the fortified blank pork were in a range of 63.5%-94.1%. Furthermore, the array could be reused for 8 times. The detection results for some real pork samples were consistent with an ultra performance liquid chromatography method.

Adsorption of Cu(II) and Zn(II) Ions from Aqueous Solution by Gel/PVA-Modified Super-Paramagnetic Iron Oxide Nanoparticles.

Super-paramagnetic iron oxide nanoparticles (SPIONs)/gelatin (gel)/polyvinyl alcohol (PVA) nanoparticles were designed and synthesized by the co-precipitation method and further modified with gel and PVA. These nanoparticles were used for the removal of Cu(II) and Zn(II) from aqueous solutions. The adsorbents were rich in different functional groups for chemisorption and showed effective adsorption properties. The adsorption of Cu(II) and Zn(II) on the SPIONs/gel and SPIONs/gel/PVA materials were investigated with respect to pH, adsorption kinetics, and adsorption isotherms. The adsorption data was fitted to the Langmuir, Freundlich, and Sips models at the optimum pH 5.2 (±0.2) over 60 min; SPIONs/gel showed maximum adsorption capacities of 47.594 mg/g and 40.559 mg/g for Cu(II) and Zn(II); SPIONs/gel/PVA showed those of 56.051 mg/g and 40.865 mg/g, respectively. The experimental data fitted the pseudo-second-order model, indicating that the process followed chemical monolayer adsorption. In addition, the SPIONs/gel/PVA showed better stability and Cu(II) adsorption efficiency than SPIONs/gel.

Investigation for terminal reflection optical fiber SPR glucose sensor and glucose sensitive membrane with immobilized GODs.

Glucose sensitive membrane (GSM) consists of glucose oxidases (GODs) and matrix material (for example, polyacrylamide gel). In this paper, we have investigated the optical property and adsorption isotherms of a GSM based on a terminal reflection optical fiber SPR sensor. Firstly, we reported the fabrication of one kind of GSM which was made of immobilized GODs on SiO2 nanoparticles and PAM gel. Then, we investigated the effects of GSM thickness, GOD content, solution pH and ambient temperature on the reflected spectrum of sensor, and the optimum parameters of the sensor, such as, GSM thickness of 12 times pulling, 4 mg/mL of GOD content in GSM, 7.0 of solution pH and 40 °C of measuring temperature were obtained. Thirdly, we measured the wavelength shifts of the optimized SPR sensor in the solutions with different glucose concentrations. As the glucose concentration increases from 0 to 80 mg/dL, the resonance wavelength decreases approximately linearly and the corresponding sensitivity is about 0.14 nm/(mg/dL). Finally, we investigated the RI of the GSM, the concentration of glucose into GSM and the adsorption isotherm of GSM by the combination of SPR experiment data, theoretical simulation and Gladstone-Dale mixing rule. As the glucose concentration is in the region of [0, 80] mg/dL, the adsorption of GSM for glucose can be explained by the Freundlich isotherm model. As the glucose concentration is in the region of [120, 500] mg/dL, the Langmuir isotherm model is more suitable to describe the adsorption process of GSM for glucose.

How Is Third Molar Status Associated With the Occurrence of Mandibular Angle and Condyle Fractures?

PURPOSE: Third molars (M3s) have been hypothesized to be associated with the risk of mandibular angle fracture and mandibular condylar fracture. The authors systematically estimated the relative risk (RR) of M3 status for the development of mandibular angle fracture and mandibular condylar fracture through a meta-analysis of cohort studies. MATERIALS AND METHODS: In this systematic review, the PubMed, EMBASE, and Cochrane Library databases were searched from inception to October 2016. The predictor of risk was the presence or absence of M3s. The primary outcome was the RR of mandibular angle or condylar fracture. A fixed- or a random-effects model was applied to evaluate the pooled risk estimates. Sensitivity analysis also was performed to identify the potential sources of heterogeneity. Publication bias was assessed by the Begg and Egger tests. RESULTS: Overall, 13 retrospective cohort studies were included. Of these, 13 reported the association between M3s and mandibular angle fracture, and 5 reported the association with mandibular condylar fracture. Patients with M3s had an increased risk of mandibular angle fractures (RR = 2.63; 95% confidence interval [CI], 2.15-3.21) but a decreased risk of mandibular condylar fractures (RR = 0.47; 95% CI, 0.25-0.86). Substantial heterogeneity in the risk estimates was found. No evidence of publication bias was found. CONCLUSION: The present meta-analysis provides further evidence associating the presence of M3s with an increased risk of mandibular angle fractures and a simultaneously decreased risk of mandibular condylar fracture. Because of potentially more serious complications associated with condylar fracture, clinicians should carefully consider the decision to remove M3s to decrease the risk of mandibular angle fracture.

Clinical features and long exercise test in Chinese patients with Andersen-Tawil syndrome.

INTRODUCTION: Andersen-Tawil syndrome (ATS) is a rare multisystem channelopathy characterized by periodic paralysis, ventricular arrhythmias, and developmental dysmorphology. There are few reports concerning ATS in the Chinese population. We analyzed clinical features and evaluated the long exercise test as a tool for diagnosis of periodic paralysis in ATS. METHODS: Direct sequencing of KCNJ2 was performed in 12 subjects from mainland China with suspected ATS. Clinical features, therapeutic responses, and long exercise tests (LET) were retrospectively analyzed. RESULTS: Twelve patients were genetically confirmed to have ATS. A small mandible and clinodactyly were demonstrated in all patients. Premature ventricular contractions were the most prevalent form of cardiac arrhythmia. The LET revealed an early amplitude decrement. CONCLUSIONS: Chinese ATS patients shared some common clinical features with reported subjects in other countries. An early amplitude decrement in LET may be useful for diagnosis of ATS. Muscle Nerve 54: 1059-1063, 2016.

Fabrication of polysiloxane-modified polyurethane sponge as low-cost organics/water separation and selective absorption material.

Through sol-gel and dip-coating processes, commercial polyurethane sponge modified by polysiloxane was fabricated under low temperature (60 °C) and atmosphere. The contact angle of the obtained polysiloxane/polyurethane sponge is 145 ± 5°. Hence, the polysiloxane/polyurethane sponge could float on water and selectively absorb organics from the surface of the water, indicating simultaneous properties of hydrophobicity and oleophilicity. The absorbent maximum value is 50-150 times of its own weight. The polysiloxane/polyurethane sponge exhibited excellent recyclability, which could be reused by squeezing the sponge due to its high mechanical stability and flexibility. Thermogravimetry-differential thermal analysis test indicated that the polysiloxane/polyurethane sponge exhibited good thermal stability and the stable contact angle of samples tested under increasing temperature indicated its good weather resistance. Due to the commercial property of polyurethane sponge and easy-handling of polysiloxane, the polysiloxane/polyurethane sponge can be easily scaled up to recover a large-area oil spill in water and further work based on the designed equipment has been under consideration.

Feruloylated Oligosaccharides from Maize Bran Modulated the Gut Microbiota in Rats.

Corn bran is a byproduct produced from corn milling; it is rich in ferulic acid and hemicellulose. In this research, the effects of feruloylated oligosaccharides (FOs) from maize bran on the microbial diversity and profiles in rat feces were investigated through 16S rRNA sequencing. FOs significantly increased bacterial richness and diversity compared with the control and xylooligosaccharides (XOS) alone. In comparison with the control group and the group administrated with XOS, FOs orally administered at 300 mg/kg increased OTU in feces by 57.0 and 24.8 %, and Chao value by 93.4 and 37.6 %, respectively. FOs also influenced obesity- and diabetes-associated bacteria. Oral administration of FOs at 300 mg/kg decreased the ratio of Firmicutes to Bacteroidetes from 477.7:1 to 55.1:1; greatly increased the reads of bacteria that were previously found resistant against diabetes in rats, such as Actinobacteria, Bacteroides, and Lactobacillus; whereas decreased diabetes-prone bacteria, such as Clostridium and Firmicutes.

Nanomechanics of Poly(catecholamine) Coatings in Aqueous Solutions.

Mussel-inspired self-polymerized catecholamine coatings have been widely utilized as a versatile coating strategy that can be applied to a variety of substrates. For the first time, nanomechanical measurements and an evaluation of the contribution of primary amine groups to poly(catecholamine) coatings have been conducted using a surface-forces apparatus. The adhesive strength between the poly(catecholamine) layers is 30-times higher than that of a poly(catechol) coating. The origin of the strong attraction between the poly(catecholamine) layers is probably due to surface salt displacement by the primary amine, π-π stacking (the quadrupole-quadrupole interaction of indolic crosslinks), and cation-π interactions (the monopole-quadrupole interaction between positively charged amine groups and the indolic crosslinks). The contribution of the primary amine group to the catecholamine coating is vital for the design and development of mussel-inspired catechol-based coating materials.