Investigation of the effect of pre-analytical factors on particle concentration and size in cryoprecipitate using nanoparticle tracking analysis.

BACKGROUND: Cryoprecipitate is used primarily to replenish fibrinogen levels in patients. Little is known about the presence of micro- or nano-sized particles in cryoprecipitate. Therefore, we aimed to quantify these particles and investigate some pre-analytical considerations. MATERIALS AND METHODS: Particle concentration and size distribution were determined in 10 cryoprecipitate units by nanoparticle tracking analysis (NTA). The effects of freeze-thawing cryoprecipitate and 0.45 µm filtration with either regenerated cellulose (RC) or polytetrafluoroethylene (PTFE) filters before sample analysis were examined. RESULTS: Neither the size nor concentration of particles were affected by two freeze/thaw cycles. PTFE filtration, but not RC filtration, significantly reduced particle mean and mode size compared to RC filtration and mode size compared to unfiltered cryoprecipitate. The 10 cryoprecipitate units had an average particle concentration of 2.50 × 1011 ± 1.10 × 1011 particles/mL, a mean particle size of 133.8 ± 7.5 nm and a mode particle size of 107.9 ± 11.1 nm. CONCLUSION: This study demonstrated that preanalytical filtration of cryoprecipitate units using RC filters was suitable for NTA. An additional freeze/thaw cycle did not impact NTA parameters, suggesting that aliquoting cryoprecipitate units prior to laboratory investigations is suitable for downstream analyses.

Ambient Pressure Drying to Construct Cellulose Acetate/Benzoxazine Hybrid Aerogels with Flame Retardancy, Excellent Thermal Stability, and Superior Mechanical Strength Resistance to Cryogenic Temperature.

Cellulose aerogels are highly attractive candidates in various applications, such as thermal insulation, adsorption separation, biomedical field, and as carriers, due to their intrinsic merits of low density, high porosity, biodegradability, and renewability. However, the expensive cost of the supercritical drying process and poor mechanical properties limit their practical applications. Herein, a new method was presented to fabricate cellulose acetate/benzoxazine hybrid aerogels (CBAs) with low cost, low drying shrinkage, excellent mechanical properties under cryogenic condition (-196 °C), outstanding thermal insulation, flame retardancy, and good thermal stability by ambient pressure drying. In more detail, the weighted drying shrinkage rate of CBAs-T2 can be controlled to 6.8% (the average value along the radial and axial directions), mainly due to the enhanced skeleton, by introducing polybenzoxazine networking chains. The resultant CBAs-T2 exhibit outstanding mechanical properties at room temperature because of the presence of the polybenzoxazine hybrid in the cellulose networking system. CBAs-T2 still have good mechanical properties even after subjecting them to liquid nitrogen treatment. In addition, the optimal value of thermal conductivity (0.033 W m-1 K-1) is gained easily because of the uniform cross-linking networking structure and small pore size. A superior flame retardance of CBAs-T2 is endowed to achieve self-extinguishment after ignition, which is attributed to the presence of the aromatic ring in the backbone structure. Moreover, the good thermal stability of CBAs-T2 is attributed to the fact that polybenzoxazine components could resist the decomposition of cellulose acetate and inhibit heat release during the combustion process. Our study would provide a novel method for obtaining biomass aerogels including the cellulose-based materials system with low drying shrinkage and superior mechanical properties despite bearing a cryogenic environment by the low-cost ambient pressure drying approach.

Construction and Nanostructure of Chitosan/Nanocellulose Hybrid Aerogels.

Biomass aerogels have received extensive attention due to their unique natural characteristics. However, biomass-based chitosan aerogels are often confronted with the traditional issue concerning a weak skeleton structure, namely, the corresponding huge shrinkage for chitosan aerogels in the stage from the final gel to the aerogel. Herein, we put forward a new approach to enhance chitosan aerogels by introducing natural biomaterial cellulose nanocrystal (CNC). CNC is applied to connect/cross-link chitosan chains to form its networking construction through supramolecular interaction/physical entanglement, eventually realizing the enhancement of the chitosan aerogel network structure. Chitosan aerogels modified with CNC exhibit a high specific surface area of 578.43 cm2 g-1, and the pore size distribution is in the range of 20-60 nm, which is smaller than the mean free path of gas molecules (69 nm), triggering a "no convection" effect. Hence, the gaseous heat transfer of chitosan aerogel is effectively suppressed. Chitosan aerogels with the addition of CNC show an excellent thermal insulation property (0.0272 W m-1 K-1 at ambient condition) and an enhanced compressive strength (0.13 MPa at a strain of 3%). This improvement method of chitosan aerogel in enhancing the skeleton structure aspect provides a new kind of idea for strengthening the nanoscale morphology structure of biomass aerogels.

Self-assembled polymeric micelles for targeted photodynamic therapy of human epidermal growth factor receptor 2 overexpressing breast cancer.

Photodynamic therapy (PDT) has been extensively explored as a promising alternative therapeutic approach for many malignant tumors. However, the PDT system generally involves unsatisfactory tumor specificity and nonspecific accumulation of photosensitizers around the target cancer cells, leading to phototoxic damage to adjacent healthy normal cells. In this study, we developed pheophorbide a (Pheo a)/human epidermal growth factor receptor 2 (HER2) targeting peptide (epitope form, HLTV, PEG2-LTVSPWY)-co-conjugated methoxy poly(ethylene glycol)-block-poly(L-lysine hydrochloride) (PEG-PLL)/hyaluronic acid (HA) (P3H2) polymeric micelles via a self-assembly method for HER2-targeted PDT treatment for breast cancer, thereby enhancing the PDT efficacy. The synthesized P3H2 polymeric micelles were spherical, with an average diameter of 125.7 ± 21.2 nm in an aqueous solution. The results ofin vitrocytotoxicity assays demonstrated that the P3H2 polymeric micelles significantly improved PDT efficacy on the SK-BR-3 cells due to the enhanced targeting ability. In addition, PDT treatment using the P3H2 polymeric micelles effectively killed breast cancer cells by inducing higher intracellular reactive oxygen species generation and apoptotic cell death. In particular, the three-dimensional cell culture model proved the synergistic PDT efficacy using P3H2 polymeric micelles on the SK-BR-3 cells. Based on these results, the PDT treatment using P3H2 polymeric micelles can serve as a highly effective therapeutic modality for breast cancer.

Photodynamic and Cold Atmospheric Plasma Combination Therapy Using Polymeric Nanoparticles for the Synergistic Treatment of Cervical Cancer.

Integrating multi-modal therapies into one platform could show great promise in overcoming the drawbacks of conventional single-modal therapy and achieving improved therapeutic efficacy in cancer. In this study, we prepared pheophorbide a (Pheo a)/targeting ligand (epitope analog of oncoprotein E7, EAE7)-conjugated poly(γ-glutamic acid) (γ-PGA)/poly(lactide-co-glycolide)-block-poly(ethylene glycol) methyl ether (MPEG-PLGA)/hyaluronic acid (PPHE) polymeric nanoparticles via self-assembly and encapsulation method for the photodynamic therapy (PDT)/cold atmospheric plasma (CAP) combinatory treatment of human papillomavirus (HPV)-positive cervical cancer, thereby enhancing the therapeutic efficacy. The synthesized PPHE polymeric nanoparticles exhibited a quasi-spherical shape with an average diameter of 80.5 ± 17.6 nm in an aqueous solution. The results from the in vitro PDT efficacy assays demonstrated that PPHE has a superior PDT activity on CaSki cells due to the enhanced targeting ability. In addition, the PDT/CAP combinatory treatment more effectively inhibited the growth of cervical cancer cells by causing elevated intracellular reactive oxygen species generation and apoptotic cell death. Moreover, the three-dimensional cell culture model clearly confirmed the synergistic therapeutic efficacy of the PDT and the CAP combination therapy using PPHE on CaSki cells. Overall, these results indicate that the PDT/CAP combinatory treatment using PPHE is a highly effective new therapeutic modality for cervical cancer.

Development of PLGA-PEG-PLGA Hydrogel Delivery System for Enhanced Immunoreaction and Efficacy of Newcastle Disease Virus DNA Vaccine.

The highly contagious Newcastle disease virus (NDV) continues to threaten poultry all over the world. The NDV DNA vaccine is a promising solution to the current Newcastle disease (ND) challenges, and thus an efficient delivery system should be developed to facilitate the efficacy of DNA vaccines. In this study, we developed a DNA vaccine delivery system consisting of a triblock copolymer of poly(lactide co-glycolide acid) and polyethylene glycol (PLGA-PEG-PLGA) hydrogel in which the recombinant NDV hemagglutinin-neuraminidase (HN) plasmid was encapsulated. Its characteristics, security, immune responses, and efficacy against highly virulent NDV were detected. The results showed that the plasmids were gradually released in a sustained manner from the hydrogel, which improved the biological stability of the plasmids and demonstrated a high biocompatibility. The plasmids, when they were incorporated into the hydrogel delivery system, enhanced immune activation and provided 100% protection against the highly virulent NDV strain. Furthermore, we proved that this NDV DNA hydrogel vaccine could improve the lymphocyte proliferation and increase the immunological cytokine production via the PI3K/Akt pathway. These results indicate that the PLGA-PEG-PLGA thermosensitive hydrogel could be a promising delivery system for the NDV DNA vaccine in order to achieve a sustained supply of plasmids and induce potent immune responses.

[The cardiovascular protection of irisin and its research progress in sports field].

Irisin is a circulating myokine induced by exercise, which is a cleaved version of fibronectin type III domain containing protein 5 (FNDC5). It can promote the browning of white fat tissue, increase energy consumption, and decrease weight. Irisin plays an important role in the regulation of various diseases, such as diabetes and coronary heart disease. Different types of exercise have different effects on irisin level in blood circulation, and moderate exercise can reduce cardiovascular symptoms. In this paper, the cardiovascular protective effect of irisin and its research progress in the field of exercise are reviewed, hoping to provide a new target for the prevention and treatment of cardiovascular diseases.

In vivo microdialysis for the evaluation of transfersomes as a novel transdermal delivery vehicle for cinnamic acid.

In this study, cinnamic acid-loaded transfersomes were prepared and dermal microdialysis sampling was used in Sprague-Dawley rats to compare the amount of drug released into the skin using transfersomes as transdermal carriers with that released on using conventional liposomes. The formulation of cinnamic acid-loaded transfersomes was optimized by a uniform design through in vitro transdermal permeation studies. Hydration time was confirmed as a significant factor influencing the entrapment efficiency of transfersomes, further affecting their transdermal flux in vitro. The fluxes of cinnamic acid from transfersomes were all higher than those from conventional liposomes, and the flux from the optimal transfersome formulation was 3.01-fold higher than that from the conventional liposomes (p < 0.05). An in vivo microdialysis sampling method revealed that the dermal drug concentrations from transfersomes applied on various skin regions were much lower than those required with conventional liposomes. After the administration of drug-containing transfersomes and liposomes on abdominal skin regions of rats for a period of 10 h, the Cmax of cinnamic acid from the compared liposomes was 3.21 ± 0.25 µg/mL and that from the transfersomes was merely 0.59 ± 0.02 µg/mL. The results suggest that transfersomes can be used as carriers to enhance the transdermal delivery of cinnamic acid, and that these vehicles may penetrate the skin in the complete form, given their significant deformability.

Polystyrene nanoplastics induce cardiotoxicity by upregulating HIPK2 and activating the P53 and TGF-ß1/Smad3 pathways.

Nanoplastics (NPs) pollution has become a global environmental problem, raising numerous health concerns. However, the cardiotoxicity of NPs exposure and the underlying mechanisms have been understudied to date. To address this issue, we comprehensively evaluated the cardiotoxicity of polystyrene nanoplastics (PS-NPs) in both healthy and pathological states. Briefly, mice were orally exposed to four different concentrations (0 mg/day, 0.1 mg/day, 0.5 mg/day, and 2.5 mg/day) of 100-nm PS-NPs for 6 weeks to assess their cardiotoxicity in a healthy state. Considering that individuals with underlying health conditions are more vulnerable to the adverse effects of pollution, we further investigated the cardiotoxic effects of PS-NPs on pathological states induced by isoprenaline. Results showed that PS-NPs induced cardiomyocyte apoptosis, cardiac fibrosis, and myocardial dysfunction in healthy mice and exacerbated cardiac remodeling in pathological states. RNA sequencing revealed that PS-NPs significantly upregulated homeodomain interacting protein kinase 2 (HIPK2) in the heart and activated the P53 and TGF-beta signaling pathways. Pharmacological inhibition of HIPK2 reduced P53 phosphorylation and inhibited the activation of the TGF-ß1/Smad3 pathway, which in turn decreased PS-NPs-induced cardiotoxicity. This study elucidated the potential mechanisms underlying PS-NPs-induced cardiotoxicity and underscored the importance of evaluating nanoplastics safety, particularly for individuals with pre-existing heart conditions.

Potential of dental pulp stem cells and their products in promoting peripheral nerve regeneration and their future applications.

Peripheral nerve injury (PNI) seriously affects people's quality of life. Stem cell therapy is considered a promising new option for the clinical treatment of PNI. Dental stem cells, particularly dental pulp stem cells (DPSCs), are adult pluripotent stem cells derived from the neuroectoderm. DPSCs have significant potential in the field of neural tissue engineering due to their numerous advantages, such as easy isolation, multidifferentiation potential, low immunogenicity, and low transplant rejection rate. DPSCs are extensively used in tissue engineering and regenerative medicine, including for the treatment of sciatic nerve injury, facial nerve injury, spinal cord injury, and other neurodegenerative diseases. This article reviews research related to DPSCs and their advantages in treating PNI, aiming to summarize the therapeutic potential of DPSCs for PNI and the underlying mechanisms and providing valuable guidance and a foundation for future research.

Flexoelectric enhanced film for an ultrahigh tunable piezoelectric-like effect.

Recent advancements in electromechanical coupling effects enable electromechanical materials in soft and stretchable formats, offering unique opportunities for biomimetic applications. However, high electromechanical performance and mechanical elasticity hardly coexist in soft materials. Flexoelectricity, an electromechanical coupling between strain gradient and electric polarization, possesses great potential of strain gradient engineering and material design in soft elastomeric materials. In this work, we report a flexoelectric enhanced elastomer-based film (FEEF) with both high electromechanical capability and stretchability. The integrated strategies with biaxial pre-stretch, crosslinking density of the elastomer along with nanoparticle size, particle filling ratio and electric field charging lead to an enhanced flexoelectricity by two orders of magnitude. Furthermore, this FEEF reveals an ultrahigh electromechanical performance by flexoelectric enhancement with its mechanical design. As a representative demonstration, an ultrahigh piezoelectric-like sensing array is fabricated for multifunctional sensing applications in strain, force and vibration, verifying an equivalent piezoelectric coefficient d33 value as high as 1.42 × 104 pC N-1, and an average d33 value of 4.23 × 103 pC N-1 at a large-scale deformation range. This proposed ultra-high piezoelectric-like effect with its approach is anticipated to provide a possibility for highly tunable piezoelectric-like effect by enhanced flexoelectricity and mechanical design in elastomeric materials.

Orally Administered Halofuginone-Loaded TPGS Polymeric Micelles Against Triple-Negative Breast Cancer: Enhanced Absorption and Efficacy with Reduced Toxicity and Metastasis.

Background: Halofuginone (HF)-loaded TPGS polymeric micelles (HTPM) were successfully fabricated using the thin-film hydration technique. HTPM via intravenous injection have been demonstrated to exert an excellent anticancer effect against triple-negative breast cancer (TNBC) cells and subcutaneous xenografts. In the present study, we further explored the potential treatment effect and mechanism of orally administered HTPM alone and in combination with surgical therapy on TNBC in subcutaneous and orthotopic mouse models. Methods: Herein, the stability and in vitro release behavior of HTPM were first evaluated in the simulated gastrointestinal fluids. Caco-2 cell monolayers were then used to investigate the absorption and transport patterns of HF with/without encapsulation in TPGS polymeric micelles. Subsequently, the therapeutic effect of orally administered HTPM was checked on subcutaneous xenografts of TNBC in nude mice. Ultimately, orally administered HTPM, combined with surgical therapy, were utilized to treat orthotopic TNBC in nude mice. Results: Our data confirmed that HTPM exhibited good stability and sustained release in the simulated gastrointestinal fluids. HF was authenticated to be a substrate of P-glycoprotein (P-gp), and its permeability across Caco-2 cell monolayers was markedly enhanced via heightening intracellular absorption and inhibiting P-gp efflux due to encapsulation in TPGS polymeric micelles. Compared with HF alone, HTPM showed stronger tumor-suppressing effects in subcutaneous xenografts of MDA-MB-231 cells when orally administered. Moreover, compared with HTPM or surgical therapy alone, peroral HTPM combined with partial surgical excision synergistically retarded the growth of orthotopic TNBC. Fundamentally, HTPM orally administered at the therapeutic dose did not cause any pathological injury, while HF alone led to weight loss and jejunal bleeding in the investigated mice. Conclusion: Taken together, HTPM could be applied as a potential anticancer agent for TNBC by oral administration.

Encapsulating Halofuginone Hydrobromide in TPGS Polymeric Micelles Enhances Efficacy Against Triple-Negative Breast Cancer Cells.

BACKGROUND: Halofuginone hydrobromide (HF) is a synthetic analogue of the naturally occurring quinazolinone alkaloid febrifugine, which has potential therapeutic effects against breast cancer, however, its poor water solubility greatly limits its pharmaceutical application. D-α-tocopherol polyethylene glycol 1000 succinate (TPGS) is a water-soluble derivative of vitamin E, which can self-assemble to form polymeric micelles (PMs) for encapsulating insoluble anti-tumor drugs, thereby effectively enhancing their anti-cancer effects. METHODS: HF-loaded TPGS PMs (HTPMs) were manufactured using a thin-film hydration technique, followed by a series of characterizations, including the hydrodynamic diameter (HD), zeta potential (ZP), stability, drug loading (DL), encapsulation efficiency (EE), and in vitro drug release. The anti-cancer effects and potential mechanism of HTPMs were investigated in the breast cell lines MDA-MB-231 and MCF-7, and normal breast epithelial cell line Eph-ev. The breast cancer-bearing BALB/c nude mouse model was successfully established by subcutaneous injection of MDA-MB-231 cells and used to evaluate the in vivo therapeutic effect and safety of the HTPMs. RESULTS: The optimized HTPMs had an HD of 17.8±0.5 nm and ZP of 14.40±0.1 mV. These PMs exhibited DL of 12.94 ± 0.46% and EE of 90.6 ± 0.85%, along with excellent storage stability, dilution tolerance and sustained drug release in pH-dependent manner within 24 h compared to free HF. Additionally, the HTPMs had stronger inhibitory effects than free HF and paclitaxel against MDA-MB-231 triple-negative breast cancer cells, and little toxicity in normal breast epithelial Eph-ev cells. The HTPMs induced cell cycle arrest and apoptosis of MDA-MB-231 by disrupting the mitochondrial membrane potential and enhancing reactive oxygen species formation. Evaluation of in vivo anti-tumor efficacy demonstrated that HTPMs exerted a stronger tumor inhibition rate (68.17%) than free HF, and exhibited excellent biocompatibility. CONCLUSION: The findings from this study indicate that HTPMs holds great clinical potential for treating triple-negative breast cancer.

[Application of spiral CT reconstruction in the forensic identification of atlantoaxial injuries].

OBJECTIVE: To evaluate diagnostic value of spiral CT reconstruction in atlantoaxial injuries. METHODS: The images of 25 cases of spiral CT reconstruction were analyzed and compared with images of CT scan and X-ray. RESULTS: In 7 cases of odontoid process fracture, X-ray demonstrated 4 cases and CT demonstrated 5 cases, whereas the spiral CT reconstruction diagnosed 7 cases, which could display the displacement of fracture clearly. The X-ray and CT showed asymmetric space between left and right gaps of atlantoaxial joint in 6 cases, while spiral CT reconstruction showed normal and excluded the possibility of atlantoaxial dislocation. There was one case of lateral atlantoaxial joint dislocation, which was demonstrated by the spiral CT reconstruction clearly but not by the X-ray and CT scan. There were 3 cases of atlantoaxial congenital deformity (1 case of absence of both posterior arch of atlas and odontoid process and 2 cases of maldevelopment of the odontoid process), which were displayed clearly by spiral CT reconstruction, but misdiagnosed as odontoid process fracture and atlantoaxial subluxation by X-ray and CT scan. CONCLUSION: Spiral CT reconstruction can provide the most accurate and integrity imaging information and is very useful in the diagnosis of atlantoaxial injuries and deformity.

LarvaSPA, A Method for Mounting Drosophila Larva for Long-Term Time-Lapse Imaging.

Live imaging is a valuable approach for investigating cell biology questions. The Drosophila larva is particularly suited for in vivo live imaging because the larval body wall and most internal organs are transparent. However, continuous live imaging of intact Drosophila larvae for longer than 30 min has been challenging because it is difficult to noninvasively immobilizeimmobilizing larvae for a long time. Here we present a larval mounting method called LarvaSPA that allows for continuous imaging of live Drosophila larvae with high temporal and spatial resolution for longer than 10 hours. This method involves partially attaching larvae to the coverslip using a UV-reactive glue and additionally restraining larval movement using a polydimethylsiloxane (PDMS) block. This method is compatible with larvae at developmental stages from second instar to wandering third instar. We demonstrate applications of this method in studying dynamic processes of Drosophila somatosensory neurons, including dendrite growth and injury-induced dendrite degeneration. This method can also be applied to study many other cellular processes that happen near the larval body wall.

DOC-LS, a new liposome for dermal delivery, and its endocytosis by HaCaT and CCC-ESF-1 cells.

The main objective of this work was to investigate the uptake channels of skin cells through which coumarin 6, transported by deoxycholate-mediated liposomes (DOC-LS), was internalised; this was also compared against the action of conventional LS. Coumarin 6-loaded DOC-LS and LS were characterised for size distribution, zeta potential, and shape, and analysed in vitro in human epidermal immortal keratinocyte (HaCaT) (epidermal) and human embryonic skin fibroblast (CCC-ESF-1) (dermal) cell lines. Various endocytosis inhibitors were incubated with cells treated with the nanocarriers. Flow cytometry results indicated that HaCaT and CCC-ESF-1 cells internalise the tested preparations through pinocytotic vesicles, macropinocytosis, clathrin-mediated endocytic pathways, and via lysosomes, which consume a considerable amount of energy. The endocytosis pathways of DOC-LS and LS showed no difference. This study provides a basis for the application of LS being combined with a microneedle system for efficient intracellular drug delivery, targeting cutaneous histocyte disorders.

Enhanced immunization via dissolving microneedle array-based delivery system incorporating subunit vaccine and saponin adjuvant.

PURPOSE: To enhance the immunogenicity of the model subunit vaccine, ovalbumin (OVA) was combined with platycodin (PD), a saponin adjuvant. To reduce the toxicity of PD, OVA, and adjuvant were loaded together into liposomes before being incorporated into a dissolving microneedle array. METHODS: OVA- and PD-loaded liposomes (OVA-PD-Lipos) were prepared using the film dispersion method. Their uptake behavior, toxicity to mouse bone marrow dendritic cells (BMDCs), and hemolytic activity to rabbit red blood cells (RBCs) were evaluated. The OVA-PD-Lipos were incorporated into a dissolving microneedle array. The chemical stability of OVA and the physical stability of OVA-PD-Lipos in microneedle arrays were investigated. The immune response of Institute of Cancer Research mice and potential skin irritation reaction of rabbits to OVA-PD-Lipos-MNs were evaluated. RESULTS: The uptake of OVA by mouse BMDCs was greatly enhanced when OVA was prepared as OVA-PD-Lipos, and in this form, the toxicity of PD was dramatically reduced. OVA was chemically stable as OVA-PD-Lipos, when OVA-PD-Lipos was incorporated into a dissolving microneedle array. Institute of Cancer Research mice treated with OVA-PD-Lipos-MNs showed a significantly enhanced immune response. PD combined with OVA elicited a balanced Th1 and Th2 humoral immune response in mice, with minimal irritation in rabbit skin. CONCLUSION: The dissolving microneedle array-based system is a promising delivery vehicle for subunit vaccine and its adjuvant.

[Optimization of formulation of Fufang Danshen immediate release tablet by colligation score].

OBJECTIVE: To optimize the formulation of immediate release tablet. METHOD: The immediate release tablet was prepared by using dry granules. The preparation was optimized by using orthogonal design which took the flow property of granules, the hardness, the disintegrating time and the dissolution rate of the tablet as indices. RESULT: The optimized formulation contained 40% microcrystalline cellulose, 10% sodium carboxymethyl starch and 15% dextrin. The hardness disintegrating time and T50 of the tablet were 4.5 kg, 3 min, 5 min respectively. CONCLUSION: It is successful to prepare on immediate release tablet using the optimized formula above.

Anticancer activity of stoppin based on a novel peptide delivery system.

Stoppin (L1) is a newly identified anticancer peptide, which is a potent p53­MDM2/MDMX inhibitor. Due to its limitation in cell delivery efficiency, a new peptide delivery system was developed based on a nucleic acid­polypeptide­liposome complex and its stability and effectiveness in vitro was investigated. The nucleic acid­stoppin­liposome complex was prepared and characterization of the complex was conducted. The stability of the complex was evaluated by enzyme digestion. Following transfection of the A549 cells with the complex, detection of green fluorescent protein (GFP) and luciferase activity was conducted to evaluate transfection efficiency. In addition, the anticancer activity of the complex was determined by 3­(4,5­dimethyl­thiazolyl­2)­2,5 diphenyltetrazolium bromide assay and apoptosis was detected by flow cytometry. The results indicated that the particle size of the complex was 102±10 nm and the encapsulation rate was ~100% when the ratio of liposome, L1 and plasmid was: 4 µl:1 µg:2 µg. The enzyme digestion experiment demonstrated that the complex was resistant to pancreatic and DNA enzyme degradation, indicating that the complex had biological stability. Cell transfection demonstrated that it had a mutual promotion effect on delivery, which could be confirmed by GFP fluorescence and luciferase assay. The cell­killing efficiency of this novel delivery system was three times higher than with stoppin alone at a low concentration. In conclusion, this novel stoppin peptide delivery system was stable. The nucleic acid­peptide­liposome complex can protect the internal component from the degradation of enzymes, promote entry of the peptide into the cells and enhance the anti­tumor activity of stoppin. Therefore, it is a promising approach for peptide delivery, which can be characterized and visualized using plasmids with GFP or luciferase.

[Experimental study on the prevention of epidural scar adhesion with polycaprolactone/polylactic acid membrane].

OBJECTIVE: To evaluate the ability of a polycaprolactone/polylactic acid (PCL/PLA) membrane to inhibit epidural scar adhesion after laminectomy, and observe the responsive changes of the pain media in the spinal cord. METHODS: L(1), L(3) laminectomies were performed on 96 Wistar rats. The rats were divided into 3 groups: None-implant Control Group (NC), Autologous free fat graft group (AFFG) and PCL/PLA membrane group (PCL/PLAm). The rats were killed at 1, 3, 6, and 12 weeks postoperatively. Epidural scar formation and adhesion were observed grossly and histologically. Reverse transcription polymerase chain reaction (RT-PCR) were used to analyses the expression of Transforming growth factor beta (TGF-beta) in the epidural scar. Immunohistochemistry stain and RT-PCR were performed to evaluate the expression of the substance P and the c-fos gene in the relevant spinal cord, and the results were analyzed statistically. RESULTS: Gross evaluation and histological evaluation showed that in the NC lamina defect site had much scar tissue and had wide and tight adhesions to the dura; in the AFFG, with the fat degrading gradually, the adhesions were increased; whereas in the PCL/PLAm group, there were slightly adhesions to the dura. RT-PCR showed that the expression of the TGF-beta was much less in the PCL/PLAm group than in the NC group. The insertion of the PCL/PLA membrane and the fat patch reduced the expression of the substance P and the c-fos gene in the spinal cord. CONCLUSION: The insertion of the PCL/PLA membrane reduces scar formation and separates fibrosis tissue from the dura, the results indicate that PCL/PLA membrane is an effective way of reducing peridural scar formation and preventing the failed back surgery syndrome.