Molecular-Weight-Dependent Degradation of Plastics: Deciphering Host-Microbiome Synergy Biodegradation of High-Purity Polypropylene Microplastics by Mealworms.

The biodegradation of polypropylene (PP), a highly persistent nonhydrolyzable polymer, by Tenebrio molitor has been confirmed using commercial PP microplastics (MPs) (Mn 26.59 and Mw 187.12 kDa). This confirmation was based on the reduction of the PP mass, change in molecular weight (MW), and a positive Δδ13C in the residual PP. A MW-dependent biodegradation mechanism was investigated using five high-purity PP MPs, classified into low (0.83 and 6.20 kDa), medium (50.40 and 108.0 kDa), and high (575.0 kDa) MW categories to access the impact of MW on the depolymerization pattern and associated gene expression of gut bacteria and the larval host. The larvae can depolymerize/biodegrade PP polymers with high MW although the consumption rate and weight losses increased, and survival rates declined with increasing PP MW. This pattern is similar to observations with polystyrene (PS) and polyethylene (PE), i.e., both Mn and Mw decreased after being fed low MW PP, while Mn and/or Mw increased after high MW PP was fed. The gut microbiota exhibited specific bacteria associations, such as Kluyvera sp. and Pediococcus sp. for high MW PP degradation, Acinetobacter sp. for medium MW PP, and Bacillus sp. alongside three other bacteria for low MW PP metabolism. In the host transcriptome, digestive enzymes and plastic degradation-related bacterial enzymes were up-regulated after feeding on PP depending on different MWs. The T. molitor host exhibited both defensive function and degradation capability during the biodegradation of plastics, with high MW PP showing a relatively negative impact on the larvae.

Accuracy and patient-centered results of marker-based and marker-free registrations for dynamic computer-assisted implant surgery: A randomized controlled trial.

OBJECTIVES: To compare implant placement accuracy and patient-centered results between the dynamic computer-assisted implant surgeries (d-CAISs) using marker-based and marker-free registration methods. MATERIALS AND METHODS: A double-armed, single-blinded randomized controlled trial was conducted, in which 34 patients requiring single implant placement at the esthetic zone were randomly assigned to the marker-based (n = 17) or marker-free (n = 17) groups. The marker-based registration was performed using a splint containing radiopaque markers, while the marker-free registration used natural teeth. The primary outcome assessed implant positioning accuracy via angular and linear deviations between preoperative and postoperative implant positions in CBCT. Patients were also surveyed about the intraoperative experience and oral health impact profile (OHIP). RESULTS: The global linear deviations at the implant platform (0.82 ± 0.28 and 0.85 ± 0.41 mm) and apex (1.28 ± 0.34 and 0.85 (IQR: 0.64-1.50) mm) for the marker-based and marker-free groups respectively showed no significant difference. However, the angular deviation of the marker-free group (2.77 ± 0.92 ° ) was significantly lower than the marker-based group (4.28 ± 1.58 ° ). There was no significant difference in the mean postoperative OHIP scores between the two groups (p = .758), with scores of 2.74 ± 1.21 for marker-based and 2.93 ± 2.18 for marker-free groups, indicating mild oral health-related impairment in both. Notably, patients in the marker-free group showed significantly higher satisfaction (p = .031) with the treatment procedures. CONCLUSIONS: D-CAIS with a marker-free registration method for single implantation in the anterior maxilla has advantages in improving implant placement accuracy and patients' satisfaction, without generating a significant increase in clinical time and expenses.

Biodegradation of various grades of polyethylene microplastics by Tenebrio molitor and Tenebrio obscurus larvae: Effects on their physiology.

Polyethylene (PE) is the most productive plastic product and includes three major polymers including high-density polyethylene (HDPE), linear low-density polyethylene (LLDPE) and low-density polyethylene (LDPE) variation in the PE depends on the branching of the polymer chain and its crystallinity. Tenebrio obscurus and Tenebrio molitor larvae biodegrade PE. We subsequently tested larval physiology, gut microbiome, oxidative stress, and PE degradation capability and degradation products under high-purity HDPE, LLDPE, and LDPE powders (<300 µm) diets for 21 days at 65 ± 5% humidity and 25 ± 0.5 °C. Our results demonstrated the specific PE consumption rates by T. molitor was 8.04-8.73 mg PE ∙ 100 larvae-1⋅day-1 and by T. obscurus was 7.68-9.31 for LDPE, LLDPE and HDPE, respectively. The larvae digested nearly 40% of the ingested three PE and showed similar survival rates and weight changes but their fat content decreased by 30-50% over 21-day period. All the PE-fed groups exhibited adverse effects, such as increased benzoquinone concentrations, intestinal tissue damage and elevated oxidative stress indicators, compared with bran-fed control. In the current study, the digestive tract or gut microbiome exhibited a high level of adaptability to PE exposure, altering the width of the gut microbial ecological niche and community diversity, revealing notable correlations between Tenebrio species and the physical and chemical properties (PCPs) of PE-MPs, with the gut microbiome and molecular weight change due to biodegradation. An ecotoxicological simulation by T.E.S.T. confirmed that PE degradation products were little ecotoxic to Daphnia magna and Rattus norvegicus providing important novel insights for future investigations into the environmentally-friendly approach of insect-mediated biodegradation of persistent plastics.

Manipulating the Piezoelectric Response of Amino Acid-Based Assemblies by Supramolecular Engineering.

Variation in the molecular architecture significantly affects the electronic and supramolecular structure of biomolecular assemblies, leading to dramatically altered piezoelectric response. However, relationship between molecular building block chemistry, crystal packing and quantitative electromechanical response is still not fully understood. Herein, we systematically explored the possibility to amplify the piezoelectricity of amino acid-based assemblies by supramolecular engineering. We show that a simple change of side-chain in acetylated amino acids leads to increased polarization of the supramolecular arrangements, resulting in significant enhancement of their piezoelectric response. Moreover, compared to most of the natural amino acid assemblies, chemical modification of acetylation increased the maximum piezoelectric tensors. The predicted maximal piezoelectric strain tensor and voltage constant of acetylated tryptophan (L-AcW) assemblies reach 47 pm V-1 and 1719 mV m/N, respectively, comparable to commonly used inorganic materials such as bismuth triborate crystals. We further fabricated an L-AcW crystal-based piezoelectric power nanogenerator that produces a high and stable open-circuit voltage of over 1.4 V under mechanical pressure. For the first time, the illumination of a light-emitting diode (LED) is demonstrated by the power output of an amino acid-based piezoelectric nanogenerator. This work presents the supramolecular engineering toward the systematic modulation of piezoelectric response in amino acid-based assemblies, facilitating the development of high-performance functional biomaterials from simple, readily available, and easily tailored building blocks.

Self-Assembling Peptide-Based Functional Biomaterials.

Peptides can self-assemble into various hierarchical nanostructures through noncovalent interactions and form functional materials exhibiting excellent chemical and physical properties, which have broad applications in bio-/nanotechnology. The self-assembly mechanism, self-assembly morphology of peptide supramolecular architecture and their various applications, have been widely explored which have the merit of biocompatibility, easy preparation, and controllable functionality. Herein, we introduce the latest research progress of self-assembling peptide-based nanomaterials and review their applications in biomedicine and optoelectronics, including tissue engineering, anticancer therapy, biomimetic catalysis, energy harvesting. We believe that this review will inspire the rational design and development of novel peptide-based functional bio-inspired materials in the future.

Accuracy and patient-centered results of static and dynamic computer-assisted implant surgery in edentulous jaws: a retrospective cohort study.

OBJECTIVES: This study aimed to compare implant positioning accuracy and patient-centered results between static and dynamic computer-assisted implant surgery (s-CAIS and d-CAIS) in edentulous jaws. MATERIAL AND METHODS: The current study retrospectively evaluated a total of 110 implants placed in 22 fully edentulous patients via s-CAIS or d-CAIS (n = 11). The accuracy of implant positioning was assessed by measuring the implant's angular deviation and deviation at the platform and apex from the preoperative design postoperatively. Patient-centered results, including preoperative and intraoperative patient-reported experiences and postoperative patient-reported outcomes, were extracted from the medical records. The nested t test and chi-square test were used to compare accuracy and patient-centered results between s-CAIS and d-CAIS postoperatively. RESULTS: The implants in the s-CAIS group showed significantly smaller angular deviation (2.32 ± 1.23°) than those in the d-CAIS group (3.87 ± 2.75°). In contrast, the platform and apical deviation were significantly larger in s-CAIS (1.56 ± 1.19 mm and 1.70 ± 1.09 mm, respectively) than d-CAIS (1.02 ± 0.45 mm and 1.00 ± 0.51 mm, respectively). Furthermore, the implants in the s-CAIS group deviated significantly (p < 0.001) more toward the coronal direction than those in the d-CAIS group. Notably, all patients in the s-CAIS group reported an obvious foreign body sensation during surgery, representing a significant difference from the d-CAIS group. CONCLUSIONS: Compared to s-CAIS, d-CAIS is a reliable technique for the placement of multiple implants in fully edentulous patients with less linear deviation and less foreign body sensation. TRIAL REGISTRATION: The retrospective study was registered on the Chinese Clinical Trial Registry on August 8th, 2022, with registration number No. ChiCTR2200062484. CLINICAL RELEVANCE: Despite the increasing use of computer- assisted implant surgery in fully edentulous patients, clinical evidence comparing implant positioning accuracy and patient-centered results between static and dynamic CAIS systems is scarce. Our study demonstrated that compared to s-CAIS, d-CAIS is a reliable technique for the placement of multiple implants in fully edentulous patients with less linear deviation.

Investigating the Correlation between Electrolyte Concentration and Electrochemical Properties of Ionogels.

Ionogels are hybrid materials comprising an ionic liquid confined within a polymer matrix. They have garnered significant interest due to their unique properties, such as high ionic conductivity, mechanical stability, and wide electrochemical stability. These properties make ionogels suitable for various applications, including energy storage devices, sensors, and solar cells. However, optimizing the electrochemical performance of ionogels remains a challenge, as the relationship between specific capacitance, ionic conductivity, and electrolyte solution concentration is yet to be fully understood. In this study, we investigate the impact of electrolyte solution concentration on the electrochemical properties of ionogels to identify the correlation for enhanced performance. Our findings demonstrate a clear relationship between the specific capacitance and ionic conductivity of ionogels, which depends on the availability of mobile ions. The reduced number of ions at low electrolyte solution concentrations leads to decreased ionic conductivity and specific capacitance due to the scarcity of a double layer, constraining charge storage capacity. However, at a 31 vol% electrolyte solution concentration, an ample quantity of ions becomes accessible, resulting in increased ionic conductivity and specific capacitance, reaching maximum values of 58 ± 1.48 µS/cm and 45.74 F/g, respectively. Furthermore, the synthesized ionogel demonstrates a wide electrochemical stability of 3.5 V, enabling diverse practical applications. This study provides valuable insights into determining the optimal electrolyte solution concentration for enhancing ionogel electrochemical performance for energy applications. It highlights the impact of ion pairs and aggregates on ion mobility within ionogels, subsequently affecting their resultant electrochemical properties.

Supramolecular Copolymers of Peptides and Lipidated Peptides and Their Therapeutic Potential.

Supramolecular peptide chemistry offers a versatile strategy to create chemical systems useful as new biomaterials with potential to deliver nearly 1000 known candidate peptide therapeutics or integrate other types of bioactivity. We report here on the co-assembly of lipidated ß-sheet-forming peptides with soluble short peptides, yielding supramolecular copolymers with various degrees of internal order. At low peptide concentrations, the co-monomer is protected by lodging within internal aqueous compartments and stabilizing internal ß-sheets formed by the lipidated peptides. At higher concentrations, the peptide copolymerizes with the lipidated peptide and disrupts the ß-sheet secondary structure. The thermodynamic metastability of the co-assembly in turn leads to the spontaneous release of peptide monomers and thus serves as a potential mechanism for drug delivery. We demonstrated the function of these supramolecular systems using a drug candidate for Alzheimer's disease and found that the copolymers enhance neuronal cell viability when the soluble peptide is released from the assemblies.

Effect of the implant-supported provisional restoration on the accuracy of digital peri-implant mucosa replication-A clinical study.

OBJECTIVE: This study aimed to quantitatively evaluate the effect of implant-supported provisional restorations (ISPRs) on the accuracy of the intraoral scanned peri-implant soft-tissue profile in the esthetic area. MATERIALS AND METHODS: Sixteen patients with a single ISPR in the maxillary central incisor's region were recruited for this study. Three impression methods were sequentially used in each patient: (1) an intraoral scanning (IOS) with the ISPR, (2) a conventional impression using the ISPR as impression coping, and (3) a routine IOS without the ISPR. The stereolithography files of the three impression methods obtained from the same patient were superimposed, and the conventional impression method was used as the reference model. Two-dimensional (2D) and three-dimensional (3D) analyses were performed to measure the peri-implant soft-tissue deviation between the reference models and IOS from the groups with or without the ISPR, respectively. Data were presented as the means ± standard deviations. Two-way analyses of variance with post hoc Sidak's multiple comparisons and paired t-tests were performed for 2D and 3D analyses, respectively. The significance level was set at p < .05. RESULTS: The peri-implant mucosa without the ISPR immediately collapsed (<20 s), particularly on the palatine side of the labial mucosa and labial side of the palatine mucosa. Consequently, the IOS without the ISPR led to 414.7 ± 116.0 µm of overall dimensional deformation in the cuff-like submucosal region, which was significantly larger (p < .0001) than that in the IOS with the ISPR (230.6 ± 85.5 µm). CONCLUSION: Implant-supported provisional restorations are important for accurate replication of the intraorally scanned peri-implant soft-tissue profile.

Clinical effects of maxillary protraction in different stages of dentition in skeletal class III children: A systematic review and meta-analysis.

OBJECTIVES: This systematic review and meta-analysis aimed to evaluate the effectiveness of using maxillary protraction during different stages of the dentition by assessing changes in the jaws and inclination of incisors. MATERIALS AND METHODS: MEDLINE (PubMed), Embase, Cochrane, Web Of Science, China National Knowledge Infrastructure and Wanfang Databases were searched without time limitations up to 15 January 2022. Google Scholar was used to search grey literature. We included cohort studies that compared the effect of maxillary protraction by analysing primary outcomes and were grouped in age-related conditions. Mean differences and 95% confidence intervals were used for statistical analysis, followed by Grading of Recommendations Assessment, Development and Evaluation analysis. RESULTS: Six studies were finally included. The heterogeneity test showed P ≥ .1 and I2  ≤ 50%, and a fixed-effect model was applied. Patients in the early treatment group (ETG) were mainly in the early-mixed dentition stage, while patients in the late treatment group (LTG) were in the late-mixed and early-permanent dentition stage. Meta-analysis showed that there were no statistical differences (P > .05) between the ETG and LTG groups in terms of SNA (the angle composed by point Sella-Nasion-Subspinale), SNB (the angle composed by point Sella-Nasion-Supramentale), ANB (the angle composed by point Subspinale-Nasion-Supramentale), Wits, U1/SN (the angle composed by the axis of upper incisors and Sella-Nasion plane) and L1/MP (the angle composed by the axis of lower incisors and the mandibular plane). CONCLUSION: Our analysis showed that maxillary protraction applied in the late-mixed or early-permanent dentition stage did not cause different effects on the maxillary growth, the correction of the intermaxillary relationship, the inhibition of mandibular growth and dental tipping of skeletal class III patients when compared to that in the early-mixed dentition stage. Collectively, these data provide a theoretical basis for widening the applicable age period of maxillary protraction and choosing the best treatment opportunity for children patients after a comprehensive assessment.

3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure.

Liquid crystalline hydrogels are an attractive class of soft materials to direct charge transport, mechanical actuation, and cell migration. When such systems contain supramolecular polymers, it is possible in principle to easily shear align nanoscale structures and create bulk anisotropic properties. However, reproducibly fabricating and patterning aligned supramolecular domains in 3D hydrogels remains a challenge using conventional fabrication techniques. Here, a method is reported for 3D printing of ionically crosslinked liquid crystalline hydrogels from aqueous supramolecular polymer inks. Using a combination of experimental techniques and molecular dynamics simulations, it is found that pH and salt concentration govern intermolecular interactions among the self-assembled structures where lower charge densities on the supramolecular polymers and higher charge screening from the electrolyte result in higher viscosity inks. Enhanced hierarchical interactions among assemblies in high viscosity inks increase the printability and ultimately lead to greater nanoscale alignment in extruded macroscopic filaments when using small nozzle diameters and fast print speeds. The use of this approach is demonstrated to create materials with anisotropic ionic and electronic charge transport as well as scaffolds that trigger the macroscopic alignment of cells due to the synergy of supramolecular self-assembly and additive manufacturing.

Clival screw and plate fixation by the transoral approach for the craniovertebral junction: a CT-based feasibility study.

PURPOSE: A clivus screw and plate was invented and proved to strengthen the stability of the craniovertebral junction (CVJ). However, it is unclear whether the clivus screw and plate could be placed onto the CVJ by transoral approach. Therefore, the present study aims to evaluate the feasibility of clivus screw and plate placement by transoral approach and investigate its relative anatomic parameters. METHODS: A total of 80 normal adults (40 males/40 females) with an average age of 60.4 ± 11.6 years old were enrolled in this study. All parameters were measured in a supposed maximums mouth-opening status on computed tomography images, where the vertex of lower incisor was defined as Point A. The vertical intersection from Point A to extracranial clivus was defined as Point B, and its distance to the bottom of clivus was measured as B length. Point B was considered as ideal screw entry point. All the cases were divided into three types based on the location of Point B: above the top portion (Type 1), between the top and bottom portion (Type 2), and below the bottom portion (Type 3) of extracranial clivus. The B Length was defined as a minus value if the case belonged to Type 3. The anterior skull base angle, the angles between tangent of extracranial clivus and the lines from Point A to different parts of clivus, and distances between Point A and clivus and C1-3 vertebra were also measured. RESULTS: One in eighty cases (1.2%) belonged to Type 1 with a B Length of 32.12 mm. Most cases (61.3%) were Type 2 with a B Length of 8.7 mm, while Type 3's was - 9.7 mm occupying for 37.5%. Significant statistic differences were found in anterior skull base angle between these three types (128.9°, 122.7° and 118.5° for Type 1, 2 and 3, respectively). The distances from Point A to the top and bottom portion of the clivus and the pharyngeal tubercle were 97.5, 96.0 and 96.8 mm, respectively. The angles between the tangent of the clivus and the lines from Point A to the above three structures were 75.7°, 92.3° and 84.0°, respectively. The distances from Point A to the middle point of anterior margin of C1 anterior tubercle, C2 vertebra and C3 vertebra were 79.1, 73.4 and 61.5 mm, respectively. CONCLUSION: The clivus screw and plate placement could be accomplished with optimal screw angle by transoral approach in most of patients. Mandibular splitting would be needed in patients with greater anterior skull angle. These slides can be retrieved under Electronic Supplementary Material.

Efficacy and tolerance of GELOXD/P-GEMOXD in newly diagnosed nasal-type extranodal NK/T-cell lymphoma: A multicenter retrospective study.

OBJECTIVES: Nasal-type extranodal natural killer NK/T-cell lymphoma (ENKTCL) is a distinct type of non-Hodgkin lymphoma with poor prognosis. This research aimed to evaluate the efficacy and safety of the GELOXD or P-GEMOXD regimens in patients with ENKTCL. METHODS: Newly diagnosed ENKTCL patients treated with either the GELOXD or the P-GEMOXD regimen were identified from three cancer centers between January 2010 and December 2016. Kaplan-Meier and Cox regression analyses were used to calculate overall survival (OS) and progression-free survival (PFS) and to investigate prognostic factors. RESULTS: One hundred and eighty-four cases were identified from three cancer centers. After 1-5 treatment cycles of GELOXD or P-GEMOXD chemotherapy, 155 (84%) patients showed a complete response (CR). The 3-year OS (73.0% vs 38.2%, P = .001) and PFS (72.8% vs 32.4%, P = .000) rates were significantly higher in early-stage patients compared with advanced-stage patients. A multivariate analysis revealed that patient CR status was a significant independent factor in disease prognosis. Grade 3/4 leukopenia occurred in 43 (23.4%) patients. Major non-hematological toxicities included nausea (n = 117, 63.6%) and vomiting (n = 66, 35.9%). CONCLUSIONS: The GELOXD and P-GEMOXD chemotherapy regimens are well tolerated and provide favorable survival outcomes in patients with ENKTCL.

Comparative Study of Percutaneous Transhepatic Biliary Stent Placement with or without Iodine-125 Seeds for Treating Patients with Malignant Biliary Obstruction.

PURPOSE: To prospectively evaluate safety and efficacy of biliary stent placement with iodine-125 (125I) seeds in patients with malignant obstructive jaundice (MOJ). MATERIALS AND METHODS: From July 2011 to June 2014, 55 patients were enrolled (group A, 11 men and 17 women, mean age 70.93 y ± 8.58; group B, 14 men and 13 women, mean age 70.26 y ± 9.71). All patients were randomly assigned to placement of a biliary stent with 125I seeds (group A) or biliary stent only (group B). After stent placement, outcomes were measured regarding relief of MOJ. Clinical success rate, survival time, and safety were recorded. P < .05 was considered to indicate significant difference. RESULTS: Stents were successfully placed in all 55 patients. MOJ was relieved in all patients, and there were no significant differences in complications related to stent insertion between the 2 groups. Mean and median stent patency were 191 days ± 19.8 (95% confidence interval [CI], 152-230 d) and 179 days ± 191.4 (95% CI, 87-267 d) in group A and 88.3 days ± 16.3 (95% CI, 61-114 d) and 77 days ± 88.2 (95% CI, 65-86 d) in group B (P < .001, log-rank test). Mean and median survival time were 222.6 days ± 21.0 (95% CI, 181-263 d) and 241 days ± 18.2 (95% CI, 179-270 d) in group A and 139.1 days ± 14.5 (95% CI, 110-167 d) and 142 days ± 16.3 (95% CI, 83-177 d) in group B (P < .001, log-rank test). CONCLUSIONS: 125I seeds combined with biliary stent placement could significantly improve stent patency. The procedure seems to be safe and to extend survival compared with self-expandable biliary stent placement.

Epidemiological profiles of hand, foot, and mouth disease, including meteorological factors, in Suzhou, China.

The purpose of this study was to examine the epidemiological profiles of hand, foot, and mouth disease (HFMD) activity in Suzhou, China, and the relationship between meteorological factors and enterovirus71 (EV71) and coxsackievirus A16 (CoxA16) infection. Children < 14 years old with probable HFMD at Soochow University Affiliated Children's Hospital were enrolled during January 2008 to December 2013. Samples from hospitalized children with HFMD were collected and tested using real-time reverse transcription PCR. Correlations between probable HFMD, laboratory-confirmed HFMD, and meteorological factors were analyzed using bivariate correlation, stepwise regression and time series analysis. A total of 29,530 probable cases were diagnosed with HFMD, and 1090 hospitalized cases were confirmed in the laboratory. The median age of individuals with HFMD was 28.6 months (interquartile range, 18-46.9 months), and the incidence was highest in children aged 12-36 months. Children infected with other enteroviruses were younger than those infected with EV71 and CoxA16. Mean temperature and total rainfall were strongly correlated with probable HFMD. In terms of the specific pathogen, only EV71 cases were associated with mean temperature during the study period of 2012-2013. Based on a simple seasonal model with a good fit, a seasonal pattern of HFMD activity could be predicted. This study provides quantitative evidence that probable HFMD was associated with mean temperature and total rainfall. Furthermore, a seasonal model could be used as an early and reliable monitoring system to predict seasonal pattern of HFMD in Suzhou, China.

The influence of electrospun fibre scaffold orientation and nano-hydroxyapatite content on the development of tooth bud stem cells in vitro.

In stem cell-based dental tissue engineering, the goal is to create tooth-like structures using scaffold materials to guide the dental stem cells. In this study, the effect of fiber alignment and hydroxyapatite content in biodegradable electrospun PLGA scaffolds have been investigated. Fiber orientation of the scaffolds was random or aligned in bundles. For scaffolds with prefabricated orientation, scaffolds were fabricated from PLGA polymer solution containing 0, 10 or 20 % nano-hydroxyapatite. The scaffolds were seeded with porcine cells isolated from tooth buds (dental mesenchymal, dental epithelial, and mixed dental mesenchymal/epithelial cells). Samples were collected at 1, 3 and 6 weeks. Analyses were performed for cell proliferation, ALP activity, and cell morphology. Fiber alignment showed an effect on cell orientation in the first week after cell seeding, but had no long-term effect on cell alignment or organized calcified matrix deposition once the cells reach confluency. Scaffold porosity was sufficient to allow migration of mesenchymal cells. Hydroxyapatite incorporation did not have a positive effect on cell proliferation, especially of epithelial cells, but seemed to promote differentiation. Concluding, scaffold architecture is important to mesenchymal cell morphology, but has no long-term effect on cell alignment or organized ECM deposition. nHA incorporation does have an effect on cell proliferation, differentiation and ECM production, and should be regarded as a bioactive component of dental bioengineered scaffolds.

Active cellulose acetate/purple sweet potato anthocyanins@cyclodextrin metal-organic framework/eugenol colorimetric film for pork preservation.

As a natural pH-sensing colorant, purple sweet potato anthocyanins (PSPAs) have demonstrated great potential in colorimetric film for freshness monitoring. However, the photothermal instability of PSPAs is still a challengeable issue. Herein, γ-cyclodextrin metal-organic framework (CD-MOF) loaded with PSPAs (PSPAs@CD-MOF, i.e., PM) and eugenol (EUG) were incorporated in cellulose acetate (CA) matrix for developing a smart active colorimetric film of CA/PM/EUG, where PM and EUG were hydrogen-bonded with CA. Attentions were focused on the photothermal colorimetric stability, colorimetric response, and antibacterial activity of the films. The presence of PM and EUG endowed the film outstanding UV-blocking performance and enhanced the barrier against water vapor and oxygen. Target film of CA/PM15/EUG10 had good photothermal colorimetric stability due to the protection of CD-MOF on PSPAs and the color changes with pH-stimuli were sensitive and reversible. In addition to antioxidant activity, CA/PM15/EUG10 had antibacterial activity against Escherichia coli and Staphylococcus aureus. The application trial results indicated that the CA/PM15/EUG10 was valid to indicate pork freshness and extended the shelf-life by 100 % at 25 °C, which has demonstrated a good perspective on smart active packaging for freshness monitoring and shelf-life extension.

Stimuli-responsive peptide hydrogels for biomedical applications.

Stimuli-responsive hydrogels can respond to external stimuli with a change in the network structure and thus have potential application in drug release, intelligent sensing, and scaffold construction. Peptides possess robust supramolecular self-assembly ability, enabling spontaneous formation of nanostructures through supramolecular interactions and subsequently hydrogels. Therefore, peptide-based stimuli-responsive hydrogels have been widely explored as smart soft materials for biomedical applications in the last decade. Herein, we present a review article on design strategies and research progress of peptide hydrogels as stimuli-responsive materials in the field of biomedicine. The latest design and development of peptide hydrogels with responsive behaviors to stimuli are first presented. The following part provides a systematic overview of the functions and applications of stimuli-responsive peptide hydrogels in tissue engineering, drug delivery, wound healing, antimicrobial treatment, 3D cell culture, biosensors, etc. Finally, the remaining challenges and future prospects of stimuli-responsive peptide hydrogels are proposed. It is believed that this review will contribute to the rational design and development of stimuli-responsive peptide hydrogels toward biomedical applications.

Bioinspired Amino Acid Based Materials in Bionanotechnology: From Minimalistic Building Blocks and Assembly Mechanism to Applications.

Inspired by natural hierarchical self-assembly of proteins and peptides, amino acids, as the basic building units, have been shown to self-assemble to form highly ordered structures through supramolecular interactions. The fabrication of functional biomaterials comprised of extremely simple biomolecules has gained increasing interest due to the advantages of biocompatibility, easy functionalization, and structural modularity. In particular, amino acid based assemblies have shown attractive physical characteristics for various bionanotechnology applications. Herein, we propose a review paper to summarize the design strategies as well as research advances of amino acid based supramolecular assemblies as smart functional materials. We first briefly introduce bioinspired reductionist design strategies and assembly mechanism for amino acid based molecular assembly materials through noncovalent interactions in condensed states, including self-assembly, metal ion mediated coordination assembly, and coassembly. In the following part, we provide an overview of the properties and functions of amino acid based materials toward applications in nanotechnology and biomedicine. Finally, we give an overview of the remaining challenges and future perspectives on the fabrication of amino acid based supramolecular biomaterials with desired properties. We believe that this review will promote the prosperous development of innovative bioinspired functional materials formed by minimalistic building blocks.

Insight into effect of polyethylene microplastic on nitrogen removal in moving bed biofilm reactor: Focusing on microbial community and species interactions.

Microplastics (MPs) pollution has emerged as a global concern, and wastewater treatment plants (WWTPs) are one of the potential sources of MPs in the environment. However, the effect of polyethylene MPs (PE) on nitrogen (N) removal in moving bed biofilm reactor (MBBR) remains unclear. We hypothesized that PE would affect N removal in MBBR by influencing its microbial community. In this study, we investigated the impacts of different PE concentrations (100, 500, and 1000 µg/L) on N removal, enzyme activities, and microbial community in MBBR. Folin-phenol and anthrone colorimetric methods, oxidative stress and enzyme activity tests, and high-throughput sequencing combined with bioinformation analysis were used to decipher the potential mechanisms. The results demonstrated that 1000 µg/L PE had the greatest effect on NH4+-N and TN removal, with a decrease of 33.5 % and 35.2 %, and nitrifying and denitrifying enzyme activities were restrained by 29.5-39.6 % and 24.6-47.4 %. Polysaccharide and protein contents were enhanced by PE, except for 1000 µg/L PE, which decreased protein content by 65.4 mg/g VSS. The positive links of species interactions under 1000 µg/L PE exposure was 52.07 %, higher than under 500 µg/L (51.05 %) and 100 µg/L PE (50.35 %). Relative abundance of some metabolism pathways like carbohydrate metabolism and energy metabolism were restrained by 0.07-0.11 % and 0.27-0.4 %. Moreover, the total abundance of nitrification and denitrification genes both decreased under PE exposure. Overall, PE reduced N removal by affecting microbial community structure and species interactions, inhibiting some key metabolic pathways, and suppressing key enzyme activity and functional gene abundance. This paper provides new insights into assessing the risk of MPs to WWTPs, contributing to ensuring the health of aquatic ecosystems.