SIKVAV-Modified Chitosan Hydrogel as a Skin Substitutes for Wound Closure in Mice.

Skin wound healing is a complex and dynamic process that involves angiogenesis and growth factor secretion. Newly formed vessels can provide nutrition and oxygen for skin wound healing. Growth factors in skin wounds are important for keratinocytes and fibroblasts proliferation, epithelialization, extracellular matrix remodeling, and angiogenesis, which accelerate skin wound healing. Therefore, treatment strategies that enhance angiogenesis and growth factors secretion in skin wounds can accelerate skin wound healing. This study investigated the effects of a SIKVAV (Ser-Ile-Lys-Val-Ala-Val) peptide-modified chitosan hydrogel on skin wound healing. Hematoxylin and eosin (H&E) staining demonstrated that the SIKVAV-modified chitosan hydrogel accelerated the re-epithelialization of wounds compared with that seen in the negative and positive controls. Masson's trichrome staining showed that more collagen fibers were deposited in the skin wounds treated with the SIKVAV-modified chitosan hydrogel than in the negative and positive controls. Immunohistochemistry assays demonstrated that more myofibroblasts were deposited and more angiogenesis occurred in skin wounds treated with the SIKVAV-modified chitosan hydrogel than in the negative and positive controls. In addition, ELISA assays showed that the SIKVAV-modified chitosan hydrogels promoted the secretion of growth factors in skin wounds. Taken together, these results suggest that the SIKVAV-modified chitosan hydrogel has the potential to be developed as synthesized biomaterials for the treatment of skin wounds.

A Preliminary Investigation into the Effect of Low-Energy Lasers on Dental Pulp Stem Cell Proliferation and the Associated Mechanism.

BACKGROUND: Dental pulp stem cells (DPSCs) have self-renewal and multidirectional differentiation potentials. As such, DPSCs have a wide range of clinical applications. Low-level laser therapy (LLLT) has positive photobiostimulatory effects on cell proliferation, angiogenesis, osteogenic differentiation, bone regeneration, and fracture healing. However, there have been few studies on the effect of low-energy lasers on DPSC proliferation. METHODS: DPSCs were obtained from dental pulp tissue. The effects of LLLT on the proliferation of DPSCs and the associated mechanisms were investigated by in vitro culture and laser irradiation. RESULTS: LLLT with energy densities of 3.5 J/cm2 and 14 J/cm2promoted the proliferation of DPSCs. Differential protein expression studies suggested the stimulation of DPSC proliferation by LLLT involved the PI3K-Akt and Rap1 signaling pathways, as well as the apoptosis-related pathway. CONCLUSION: This preliminary study demonstrated that low-energy lasers have a pro-proliferative effect on DPSCs, and identified possible associated mechanisms. Our findings provide a theoretical basis for the clinical application of DPSCs and suggest novel strategies for the treatment of related diseases.

Continuous cellulosic bioethanol fermentation by cyclic fed-batch cocultivation.

Cocultivation of cellulolytic and saccharolytic microbial populations is a promising strategy to improve bioethanol production from the fermentation of recalcitrant cellulosic materials. Earlier studies have demonstrated the effectiveness of cocultivation in enhancing ethanolic fermentation of cellulose in batch fermentation. To further enhance process efficiency, a semicontinuous cyclic fed-batch fermentor configuration was evaluated for its potential in enhancing the efficiency of cellulose fermentation using cocultivation. Cocultures of cellulolytic Clostridium thermocellum LQRI and saccharolytic Thermoanaerobacter pseudethanolicus strain X514 were tested in the semicontinuous fermentor as a model system. Initial cellulose concentration and pH were identified as the key process parameters controlling cellulose fermentation performance in the fixed-volume cyclic fed-batch coculture system. At an initial cellulose concentration of 40 g liter(-1), the concentration of ethanol produced with pH control was 4.5-fold higher than that without pH control. It was also found that efficient cellulosic bioethanol production by cocultivation was sustained in the semicontinuous configuration, with bioethanol production reaching 474 mM in 96 h with an initial cellulose concentration of 80 g liter(-1) and pH controlled at 6.5 to 6.8. These results suggested the advantages of the cyclic fed-batch process for cellulosic bioethanol fermentation by the cocultures.

Novel antimicrobial and self-healing dental resin to combat secondary caries and restoration fracture.

OBJECTIVE: Dental resin composites have been the most popular materials for repairing tooth decay in recent years. However, secondary caries and bulk fracture are the major hurdles that affect the lifetime of dental resin composites. This current study synthesized a novel antimicrobial and self-healing dental resin containing nanoparticle-modified self-healing microcapsules to combat secondary caries and restoration fracture. METHODS: Multifunctional dental resins containing 0-20% nanoparticle-modified self-healing microcapsules were prepared. The water contact angle, antimicrobial properties, mechanical properties, cell toxicity, and self-healing capability of the dental resins were tested. RESULTS: A novel multifunctional dental resin was synthesized. When the microcapsule mass fraction was 10%, the resin presented a strong bacteriostasis rate (80.3%) and excellent self-healing efficiency (66.1%), while the hydrophilicity, mechanical properties, and cell toxicity were not affected. SIGNIFICANCE: The novel antimicrobial self-healing dental resin is a promising candidate for use in clinical practice, which provides a simple and highly efficient strategy to combat secondary caries and restoration fracture. This novel dental resin also gives the inspiration to prolong the service life of dental restorations.

Exposure to microplastics in the upper respiratory tract of indoor and outdoor workers.

The aim of this study was to determine the presence of microplastics (MPs) in the upper respiratory tract of indoor and outdoor workers, to assess the type and the extent of contamination. Sputum and nasal lavage fluid were collected, and plastic particles were quantitatively analyzed by polarizing microscopy and a laser direct infrared chemical imaging system. The polarized light microscopy results showed that suspicious MPs were found in the nasal lavage and sputum of both couriers and office staff, and the abundance of MPs in the nasal lavage of office staff was significantly higher than in couriers (P < 0.0001). The chemical imaging results showed that polycarbonate (24.2%) and polyvinylchloride (PVC) (23.0%) were the predominant plastic materials in the sputum of couriers, while polyamide (PA) (25.3%) and polyethylene (22.9%) were dominant in the nasal lavage fluid. The sputum and nasal lavage fluid of office staff were both dominated by PVC (39.1% and 41.1%, respectively) and PA (24.8% and 31.6%, respectively). Therefore, this study revealed that microplastic pollution was found in the respiratory tract of both indoor and outdoor workers, but the distribution of MP particles differed between the two populations.

Construction and operation of freshwater sediment microbial fuel cell for electricity generation.

In this work, sediment microbial fuel cell (SMFC) with granule activated carbon (GAC) cathode and stainless steel anode was constructed in laboratory tests and various factors on SMFC power output were investigated. The maximum power densities for the SMFC with GAC cathode was 3.5 mW m(-2), it was much higher than SMFC with round stainless steel cathode. Addition of cellulose reduced the output power from SMFC at the beginning of experiments, while the output power was found to increase after adding cellulose to sediments on day 90 of operation. On 160 day, maximum power density from the SMFC with adding 0.2% cellulose reached to 11.2 mW m(-2). In addition, the surface morphology of stainless steel anode on day 90 was analyzed by scanning electron microscope. It was found that the protection layer of the stainless steel as electrode in SMFCs was destroyed to some extent.

Cellulose degradation by one mesophilic strain Caulobacter sp. FMC1 under both aerobic and anaerobic conditions.

Caulobacteria are presumed to be responsible for considerable mineralization of organic material in aquatic environments. In this study, a facultative, mesophilic and cellulolytic bacterium Caulobacter sp. FMC1 was isolated from sediments which were taken from a shallow freshwater lake and then enriched with amendment of submerged macrophyte for three months. This strain seemed to evolve a capacity to adapt redox-fluctuating environments, and could degrade cellulose both aerobically and anaerobically. Cellulose degradation percentages under aerobic and anaerobic conditions were approximately 27% and 10% after a 240-h incubation in liquid mediums containing 0.5% cellulose, respectively. Either cellulose or cellobiose alone was able to induce activities of endoglucanase, exoglucanase, and ß-1,4-glucosidase. Interestingly, ethanol was produced as the main fermentative product under anaerobic incubation on cellulose. These results could improve our understanding about cellulose-degrading process in aquatic environments, and were also useful in optimizing cellulose bioconversion process for bioethanol production.

[Preliminary comparison and analysis of prescription content in Dongeuibogam (Treasured Mirror of Eastern Medicine) and Wanbinghuichun (Recovery from all ailments)].

By making a comparison of nineteen prescriptions cited from Wanbinghuichun (Recovery from all ailments) in "Dongeuibogam.Neijingpianyi" (Treasured Mirror of Eastern Medicine.First Chapter of Interior), it can be seen that XU Jun did not cite the original text from Chinese ancient medical works but had his own editorial opinion, especially in the modifications and adjustments to the original text of Wanbinghuichun (Recovery from all ailments), referring to XU Jun's own clinical experiences and taking into account local conditions specific to Korea, a step in the localization of TCM in Korea is evident.

Upregulation of aldose reductase by homocysteine in type II alveolar epithelial cells.

Homocysteine (Hcy) has recently been recognized as an integral component of several disorders. However, the association between hyperhomocysteinemia (HHcy) and pulmonary disease is not well understood. The combination of two-dimensional electrophoresis and tandem mass spectrometry detected and identified proteins that are differentially expressed in human type II alveolar epithelial cells (A549 cells) treated by Hcy. We found that aldose reductase (AR) showed more abundant expression in the cells. Further, Hcy (100-500microM) could induce a time- and dose-dependent upregulation of AR protein levels. Immunohistochemical staining of cross-sections from HHcy mice lungs also revealed increased expression of AR protein. Intracellular levels of reactive oxygen species (ROS) were remarkably elevated in A549 cells treated with Hcy. Pretreatment of A549 cells with catalase and SOD significantly suppressed the Hcy-induced AR expression, which suggests the involvement of ROS in this process. The major signaling pathway mediating the upregulation of AR was demonstrated to be the Ras/Raf/ERK1/2 pathway. In addition, Hcy might reduce surfactant protein B (SP-B) expression in the cells, which could be significantly attenuated by Alrestatin, an AR inhibitor, indicating a damaging role of Hcy-induced AR elevation in the lung. These results show a novel and unanticipated link between HHcy and AR upregulation that may be a risk factor in pulmonary disease of patients with HHcy.