The incidence and risk factors for extensive epidural cement leakage in cement-augmented pedicle screw fixation: a multicenter retrospective study.

INTRODUCTION: In cement-augmented pedicle screw fixation (CAPSF), epidural cement leakage (CL) is a frequently reported complication with the potential for neural injury, especially when it is extensive. To date, there has been no reports discussing basivertebral foramen morphology and pedicle screw placement, which is critical in the analysis of the risk of extensive epidural CL. Thus, this study aimed to identify the incidence and risk factors for extensive epidural CL in osteoporotic patients with CAPSF. MATERIALS AND METHODS: 371 osteoporotic patients using 1898 cement-augmented screws were included. Preoperative computed tomography (CT) was utilized to characterize basivertebral foramen morphology. Following CAPSF, the severity of epidural CL, the implantation position of pedicle screw and cement extension within the vertebral body were determined by postoperative CT. In this study, significant risk factors for extensive epidural CL were identified through logistic regression analysis. RESULTS: There were 19 patients (5.1%) and 32 screws (1.7%) with extensive epidural CL. Nine patients (involving 19 screws) had neurological symptoms. The independent risk factors for patients with extensive epidural CL were decreased BMD and increased number of augmented screws. Significant predictors for extensive epidural CL were a magistral type of basivertebral foramen, more volume of cement injected, solid screw, a shallower screw implantation, and the smaller distance between the tip of the screw and the midline of vertebral body. CONCLUSION: Extensive epidural CL risk was significant in CAPSF when a magistral basivertebral foramen was present; solid screws and more volume of cement were used; and screw tip was implanted shallower or closer to the midline.

Prediction of subsequent vertebral compression fractures after thoracolumbar kyphoplasty: a multicenter retrospective analysis.

OBJECTIVE: Second fractures at the cemented vertebrae (SFCV) are often seen after percutaneous kyphoplasty, especially at the thoracolumbar junction. Our study aimed to develop and validate a preoperative clinical prediction model for predicting SFCV. METHODS: A cohort of 224 patients with single-level thoracolumbar osteoporotic vertebral fractures (T11-L2) from 3 medical centers was analyzed between January 2017 and June 2020 to derive a preoperative clinical prediction model for SFCV. Backward-stepwise selection was used to select preoperative predictors. We assigned a score to each selected variable and developed the SFCV scoring system. Internal validation and calibration were conducted for the SFCV score. RESULTS: Among the 224 patients included, 58 had postoperative SFCV (25.9%). The following preoperative measures on multivariable analysis were summarized in the 5-point SFCV score: bone mineral density (≤-3.05), serum 25-hydroxy vitamin D3 (≤17.55 ng/mL), standardized signal intensity of fractured vertebra on T1-weighted images (≤59.52%), C7-S1 sagittal vertical axis (≥3.25 cm), and intravertebral cleft. Internal validation showed a corrected area under the curve of 0.794. A cutoff of ≤1 point was chosen to classify a low risk of SFCV, for which only 6 of 100 patients (6%) had SFCV. A cutoff of ≥4 points was chosen to classify a high risk of SFCV, for which 28 of 41 (68.3%) had SFCV. CONCLUSION: The SFCV score was found to be a simple preoperative method for identification of patients at low and high risk of postoperative SFCV. This model could be applied to individual patients and aid in the decision-making before percutaneous kyphoplasty.

Lower ratio of adjacent to injured vertebral bone quality scores can predict augmented vertebrae recompression following percutaneous kyphoplasty for osteoporotic vertebral fractures with intravertebral clefts.

BACKGROUND: Despite the favorable clinical outcome of percutaneous kyphoplasty (PKP) in symptomatic osteoporotic vertebral fractures (OVFs) patients with intravertebral clefts (IVCs), previous studies have demonstrated a high incidence of augmented vertebrae recompression (AVR). We aim to evaluate the usefulness of the adjacent and injured vertebral bone quality scores (VBQS) based on T1-weighted MRI images in AVR after PKP for OVFs with IVCs. METHODS: Patients who underwent PKP for single OVFs with IVCs between January 2014 and September 2020 were reviewed and met the inclusion criteria. The follow-up period was at least 2 years. Relevant data affecting AVR were collected. Pearson and Spearman correlation coefficients were used to calculate the correlation between the injured and adjacent VBQS and BMD T-score. We determined independent risk factors and critical values using binary logistic regression analysis and receiver operating characteristic curves (ROC). RESULTS: A total of 165 patients were included. Recompression group was found in 42 (25.5%) patients. The independent risk factors for AVR were lumbar BMD T-score (OR = 2.53, p = 0.003), the adjacent VBQS (OR = 0.79, p = 0.016), the injured VBQS (OR = 1.27, p = 0.048), the ratio of adjacent to injured VBQS (OR = 0.32, p < 0.001), and cement distribution pattern. Among these independent significant risk factors, the prediction accuracy of the ratio of adjacent to injured VBQS was the highest (Cutoff = 1.41, AUC = 0.753). Additionally, adjacent and injured VBQS were negatively correlated with lumbar BMD T-scores. CONCLUSION: For the patients after PKP treatment for OVFs with IVCs, the ratio of adjacent to injured VBQS had the best prediction accuracy in predicting recompression and when the ratio of adjacent to injured VBQS was <1.41, the augmented vertebrae were more likely to have recompression in the future.

Similar Long-Term Clinical Outcomes of Deep Brain Stimulation With Different Electrode Targets for Primary Meige Syndrome: One Institution's Experience of 17 Cases.

OBJECTIVE: Deep brain stimulation (DBS) is considered an effective and safe treatment for patients with primary Meige syndrome (MS). Both the subthalamic nucleus (STN) and globus pallidus pars internus (Gpi) have been shown to be optional targets for electrode implantation to improve clinical symptoms, but the relationship between clinical outcomes and target is still unclear. The current study aims to compare the clinical outcomes of DBS with different electrode targets for primary MS. MATERIALS AND METHODS: We performed a retrospective study to assess the clinical outcomes for 17 consecutive patients with primary MS in Wuhan Union Hospital from January 2016 to September 2019. Six patients were treated by Gpi-DBS and 11 patients were treated by STN-DBS. All patients were assessed before surgery and at the last follow-up after surgery. The Burke-Fahn-Marsden Dystonia Rating Scale (BFMDRS) including the movement and disability scales was used to evaluate the dystonia severity of the eyes, the mouth, speech, and swallowing. The median follow-up duration was 30.1 ± 13.1 months (range 6 months-52 months). RESULTS: In our study, DBS improved the BFMDRS-M scores by 70.52 ± 7.45% and the BFMDRS-D scores by 70.51 ± 8.38% for patients with MS. STN-DBS and Gpi-DBS had similar effects not only on the BFMDRS-M and BFMDRS-D scores, but also on the subitems including eyes, mouth, speech, and swallowing. The stimulation voltage for the Gpi was significantly higher than that for the STN. The improvements were similar in the general anesthesia and local anesthesia groups (p > 0.05). CONCLUSION: The curative effects of STN-DBS and Gpi-DBS on patients with primary MS are similar. Both the STN and Gpi could be effective targets of DBS for primary MS.

New technologies provide more metabolic engineering strategies for bioethanol production in Zymomonas mobilis.

Bioethanol has been considered as a potentially renewable energy source, and metabolic engineering plays an important role in the production of biofuels. As an efficient ethanol-producing bacterium, Zymomonas mobilis has garnered special attention due to its high sugar uptake, ethanol yield, and tolerance. Different metabolic engineering strategies have been used to establish new metabolic pathways for Z. mobilis to broaden its substrate range, remove competing pathways, and enhance its tolerance to ethanol and lignocellulosic hydrolysate inhibitors. Recent advances in omics technology, computational modeling and simulation, system biology, and synthetic biology contribute to the efficient re-design and manipulation of microbes via metabolic engineering at the whole-cell level. In this review, we summarize the progress of some new technologies used for metabolic engineering to improve bioethanol production and tolerance in Z. mobilis. Some successful examples of metabolic engineering used to develop strains for ethanol production are described in detail. Lastly, some important strategies for future metabolic engineering efforts are also highlighted.

The cement leakage in cement-augmented pedicle screw instrumentation in degenerative lumbosacral diseases: a retrospective analysis of 202 cases and 950 augmented pedicle screws.

PURPOSE: To evaluate the incidence, type and risk factors of cement leakage (CL) with cement-augmented pedicle screw instrumentation (CAPSI) in degenerative lumbosacral disease. METHODS: Two hundred and two patients using a total of 950 cement-augmented screws were enrolled. CL was classified into three types: type S: leakage via segmental veins; type B: leakage via basivertebral veins; and type I: leakage via pedicle screw instrumentation to paravertebral soft tissue. The age, gender, operation stage (primary or later stage), body mass index, bone mineral density, the number and type of augmented screw, the position of the tip of screw (lateral or internal part of vertebral body), the position of screw (left or right side), the volume of bone cement, location of the augmented vertebra (lumbar or sacrum), the type of CL and complications were recorded. Binary logistic regression correlation was used to analyze risk factors of veins leakage (type S and type B). RESULTS: The CL was observed in 165 patients (81.68%) and 335 screws (35.26%), leakage types of S, B and I were seen in 255 (76.12%), 77 (22.99%), and 30 (8.96%) of screws, respectively. Besides, double or multiple routes of leakage were seen in 27 screws. Number of augmented screw was a risk factor for vein leakage (OR 0.58; 95% CI 0.44-0.77; P = 0.000). Furthermore, the doses of cement (OR 0.79; 95% CI 0.61-0.99; P = 0.038) and the position of screw (OR 0.39; 95% CI 0.29-0.53; P = 0.000) were identified as risk factors for type S, and the doses of bone cement (OR 0.37; 95% CI 0.25-0.54; P = 0.000) and the position of the tip of screw (OR 0.07; 95% CI 0.04-0.13; P = 0.000) were risk factors for type B. CONCLUSIONS: CAPSI bears a high risk of asymptomatic CL, with a higher rate of leakage into segmental veins and basivertebral veins. As is known, more augmented screws and larger doses of cement are risk factors for veins leakage (type S and type B), while the tip of screw approaching to the midline of the vertebral body is another risk factor to type B. Thus, the CL could be reduced by the amelioration of operative techniques and procedures. These slides can be retrieved under Electronic Supplementary Material.

Biomechanical effects of cement distribution in the fractured area on osteoporotic vertebral compression fractures: a three-dimensional finite element analysis.

BACKGROUND: According to some clinical studies, insufficient cement distribution (ID) in the fractured area and asymmetrical cement distribution around the fractured area were thought to be the reasons for unrelieved pain and recollapse after percutaneous vertebral augmentation (PVA) in the treatment of symptomatic osteoporotic vertebral compression fractures. METHODS: Finite element methods were used to investigate the biomechanical variance among three patterns of cement distribution (ID and sufficient cement distribution in the fractured area and asymmetrical cement distribution around the fractured area including upward [BU] and downward [BD] cement distribution). RESULTS: Compared with fractured vertebra before PVA, distribution of von Mises stress in the cancellous bone was transferred to be concentrated at the cancellous bone surrounding cement after PVA, whereas it was not changed in the cortical bone. Compared with sufficient cement distribution group, maximum von Mises stress in the cancellous bone and cortical bone and maximum displacement of augmented vertebra increased significantly in the ID group, whereas asymmetrical cement distribution around the fractured area in BU and BD groups mainly increased maximum von Mises stress in the cancellous bone significantly. Similar results could be seen in all loading conditions. CONCLUSIONS: ID in the fractured area may lead to unrelieved pain after PVA in the treatment of symptomatic osteoporotic vertebral compression fractures as maximum displacement of augmented vertebral body increased significantly. Both ID in the fractured area and asymmetrical cement distribution around the fractured area are more likely to induce recollapse of augmented vertebra because they increased maximum von Mises stress in the cancellous bone and cortical bone of augmented vertebra significantly.

Establishment and Validation of Nomograms and Web Calculators for Different Cement Leakage Risk Types in Pedicle Screw Augmentation for Degenerative Lumbar Stenosis in Osteoporotic Vertebrae.

BACKGROUND: The use of cement in pedicle screw augmentation (PSA) enhances the pullout force of pedicle screws in vertebrae affected by osteoporosis. Risks involved in the use of cement for PSA include nerve injury and vascular damage caused by cement leakage. METHODS: This study included all patients who received PSA for degenerative lumbar stenosis in osteoporotic vertebrae from January 2014 to May 2022. Postoperative computed tomography was used to assess cement leakage. Correlation analysis and logistic regression analyses were used to establish the associated clinical or radiological factors, which were then used to construct nomograms and web calculators. RESULTS: The study comprised 181 patients including 886 screws inserted into 443 vertebrae. Perivertebral cement leakage was significantly associated with female sex, decreased bone mineral density, solid screws, and scattered cement distribution. Cement leakage through segmental veins (type S, 72.1%), leakage through basivertebral veins (type B, 23.9%), and instrument-related leakage (type I, 13.9%) accounted for most cement leakage. Patients with lower bone mineral density and scattered cement distribution were more likely to experience type S or type B leakage. Our analysis data showed that cement augmentation with cannulated and fenestrated screws tended toward concentrated cement distribution. Creation and verification of each nomogram additionally showcased the prognostic capability and medical significance of the corresponding model. CONCLUSIONS: Nomograms and web-based calculators can accurately forecast the probability of cement leakage. PSA should be routinely performed using cannulated and fenestrated screws, along with a moderate amount of high-viscosity cement, with continuous monitoring using fluoroscopy.

Anatomic distribution of basivertebral foramen with a magistral form in vertebral bodies of T10~L5 and its clinical significance for extensive epidural cement leakage in cement-augmented pedicle screw fixation: a multicenter case-control study.

BACKGROUND: There are no reports discussing anatomic distribution of basivertebral foramen (BVF) in the osteoporotic vertebral body, which is critical in the analysis of the risk of epidural cement leakage (ECL) after cement-augmented pedicle screw fixation (CAPSF). METHODS: 371 osteoporotic patients using 1898 cement-augmented screws were included. Preoperative computed tomography (CT) was used to determine the frequency, width, height, and depth of magistral BVF in T10~L5. Additionally, we measured the distance between BVF and the left/right borders of vertebral body as well as the distance between BVF and upper/lower endplates. Following CAPSF, the severity of ECL and the position of pedicle screws were determined by postoperative CT. Finally, significant risk factors for extensive ECL were identified through binary logistic regression analysis. RESULTS: Of 2968 vertebral bodies ranging from T10 to L5, 801 (42.2%) had a magistral BVF. From T10 to L5, the frequency of magistral BVF appeared to gradually increase. The magistral BVF was much closer to the upper endplate and the depth accounted for about a quarter of anteroposterior diameter of vertebral body. Overall, there were 19 patients (5.1%) and 32 screws (1.7%) with extensive ECL, nine of whom had neurological symptoms. The independent risk factors for extensive ECL were the magistral BVF (OR = 8.62, P < 0.001), more volume of cement injected (OR = 1.57, P = 0.031), reduced distance from screw tip to vertebral midline (OR = 0.76, P = 0.003) and vertebral posterior wall (OR = 0.77, P < 0.001) respectively. CONCLUSION: When planning a CAPSF procedure, it is important to consider anatomical distribution of BVF and improve screw implantation methods.

Endoscopic Revision for Long-Term Symptomatic Cage Retropulsion after TLIF: The Clinical Presentation in a Single Center.

BACKGROUND: Cage retropulsion after transforaminal lumbar interbody fusion (TLIF) is a common complication that is more frequently detected in the early postoperative period. Revision in the early stages is relatively less difficult in symptomatic cases. However, cage retropulsion is quite rare for patients with intervertebral osseous fusion in the long term after TLIF, and there are no relevant reports related to the revision plan. CASE PRESENTATION: Here, we report a case of a patient who underwent L4-S1 TLIF at another hospital 4 years ago, accompanied by recurrent pain and discomfort of the left lower limb after the operation. Due to recent condition aggravation, it was considered to be caused by compression of the nerve root due to cage retropulsion. Nerve root sealing and endoscopy surgery were performed on the operative segment. It was found that cage retropulsion at the L4/5 level was a suspicious focus according to careful analysis of the clinical manifestations of the patient. Selective block of the nerve root on the level resulted in relief of the patient's original symptoms. After the posterior edge of the cage was exposed under the endoscope through an intervertebral foramen approach, the posterior edge of the cage protruding into the spinal canal was removed by high-speed burr grinding, working casing reduction and other methods. Postoperative symptoms of pain in the low back and lower limb were relieved completely. CONCLUSIONS: It is feasible to use the power system to remove the retrograde cage under the endoscope through the intervertebral foramen approach for the revision of symptomatic polyether ether ketone (PEEK) cage retropulsion in the long term after TLIF.

The Potential Impact of Basivertebral Foramen Morphology and Pedicle Screw Placement on Epidural Cement Leakage With Cement-Augmented Fenestrated Pedicle Screw Fixation: A Multicenter Retrospective Study of 282 Patients and 1404 Augmented Screws.

BACKGROUND: Epidural cement leakage (CL) is a common complication in cement-augmented fenestrated pedicle screw fixation (CAFPSF) with the potential for neural injury. However, there are no reports discussing basivertebral vein morphology and pedicle screw placement, which are critical in the analysis of the risk of epidural CL after CAFPSF. OBJECTIVE: To identify the incidence and risk factors of epidural CL in osteoporotic patients during CAFPSF. METHODS: Two hundred and eighty-two osteoporotic patients using 1404 cement-augmented fenestrated screws were included. Preoperative computed tomography (CT) was used to characterize the morphology of posterior cortical basivertebral foramen. After CAFPSF, the severity of epidural CL, the implantation position of the screw tip, and cement extension within the vertebral body were determined by postoperative CT scans. In this study, significant risk factors for epidural CL were identified through logistic regression analysis. RESULTS: In total, 28 patients (18.8%) and 108 screws (7.7%) had epidural CL and 7 patients (13 screws) experienced neurological symptoms. Although local epidural CL was generally not clinically significant, extensive epidural leakage posed a higher risk of neurological symptoms. Significant predictors for extensive epidural CL were a magistral type of basivertebral foramen and the smaller distance between the tip of the screw and the posterior wall of the vertebral body. CONCLUSION: In osteoporotic patients receiving CAFPSF, epidural CL is relatively common. The morphology of basivertebral foramen should be taken into account when planning a CAFPSF procedure. It is important to try and achieve a deeper screw implantation, especially when a magistral type of basivertebral foramen is present.

Establishment of a novel risk prediction model for recompression of augmented vertebrae at the thoracolumbar junction and modified puncture technique for prevention: a multicenter retrospective study.

OBJECTIVE: Recompression of augmented vertebrae (RCAV) is often seen after percutaneous kyphoplasty (PKP), especially at the thoracolumbar junction. The authors aimed to develop and validate a risk prediction model (nomogram) for RCAV and to evaluate the efficacy of a modified puncture technique for RCAV prevention after PKP for thoracolumbar osteoporotic vertebral fractures (OVFs). METHODS: Patients who underwent PKP for single thoracolumbar OVFs (T10-L2) between January 2016 and October 2020 were reviewed and followed up for at least 2 years. All patients were randomly divided into a training group (70%) and a validation group (30%). Relevant potential data affecting recompression were collected. Predictors were screened by using binary logistic regression analysis to construct the nomogram. Calibration and receiver operating characteristic curves were used to evaluate the consistency of the prediction models. Finally, the efficacy of the modified puncture technique for prevention of RCAV in OVF patients with a preoperative intravertebral cleft (IVC) was further demonstrated through binary logistic regression analysis. RESULTS: Overall, 394 patients were included and 116 of them (29.4%) sustained RCAV. The independent risk factors included decreased bone mineral density, lower level of serum 25-hydroxy vitamin D3, larger C7-S1 sagittal vertical axis (SVA), preoperative IVC, and solid-lump cement distribution. The area under the curve (AUC) of the prediction model was 0.824 in the training group and 0.875 in the validation group patients. The calibration curve indicated the predictive power of this nomogram, with the preoperative IVC having the highest prediction accuracy (AUC 0.705). The modified puncture technique significantly reduced the incidence of RCAV by enhancing bone cement distribution into a sufficiently diffused distribution in OVF patients with preoperative IVC. CONCLUSIONS: The nomogram prediction model had satisfactory accuracy and clinical utility for identification of patients at low and high risk of postoperative RCAV. Patients at high risk of postoperative RCAV might benefit from the target puncture technique and vitamin D supplementation as well as effective antiosteoporotic therapies.

Phenyllactic acid application to control Listeria monocytogenes biofilms and its growth in milk and spiced beef.

Listeria monocytogenes, as a food-associated pathogen, is able to develop biofilms on different surfaces of food contact, which seriously threatens food safety. Phenyllactic acid (PLA) exhibits excellent inhibitory effects on many bacterial strains including L. monocytogenes. Our study aimed to investigate effects of PLA on L. monocytogenes biofilms and its growth in milk and on spiced beef. Biofilm biomass was measured by the microplate method and biofilm structure was observed by electron microscopy. Growth of L. monocytogenes in food samples was determined by colony counting. Results from the agar dilution method demonstrated that L. monocytogenes 10403S had a PLA minimum inhibitory concentration (MIC) value of 6 mg/ml. Sub-inhibitory concentrations of PLA could inhibit biofilm formation by reducing the secretion of exopolysaccharides and extracellular proteins in L. monocytogenes. PLA at concentrations above 1/2MIC could destroy mature biofilms of L. monocytogenes by decreasing the exopolysaccharides and extracellular proteins in the biofilm framework. Both swimming and swarming motilities of L. monocytogenes were inhibited by PLA. The hemolytic activity of L. monocytogenes was inactivated by PLA. However, the capacity to attach and invade Caco-2 cells was not affected by PLA. The results displayed that PLA had no effect on the expression of genes associated with motility, but reduced the expression level of the hly gene encoding Listeria hemolysin. When added to ultra-high temperature (UHT) whole and pasteurized milk, PLA at 3 mg/ml inhibited L. monocytogenes growth through 14 days of storage at 4 °C. PLA at concentrations ≥3 mg/ml significantly reduced L. monocytogenes counts on spiced beef samples during storage. PLA has potential as an alternative antimicrobial to control L. monocytogenes contamination and its biofilms in food industry.

[Risk factors of hidden blood loss in percutaneous vertebral augmentation].

OBJECTIVE: To explore the risk factors of hidden blood loss in osteoporosis vertebral compression fractures during percutaneous vertebral augmentation. METHODS: From October 2018 to December 2019, 360 patients with osteoporosis vertebral compression fractures who received percutaneous vertebral augmentation were enrolled in this study. The factors analyzed included gender, age, surgical methods, disease course, height, weight, the operative segment, bone mineral density, amount of bone cement, operative time, percentage of height loss, percentage of vertebral height restoration, cement leakage, blood clotting function, preoperative and postoperative hemoglobin and hematocrit and other internal diseases. Total blood loss was calculated by Gross's formula, influential factors of the hidden blood loss were further analyzed by t-test, multivariate linear regression and one-way ANOVA analysis. RESULTS: Surgical methods, the operative segment, disease course, cement leakage, preoperative hemoglobin, cement leakage via the basivertebral and segmental vein were significantly correlated with hidden blood loss(P<0.05). CONCLUSION: Patients with percutaneous kyphoplasty, two-level and multi-level surgery, the course of the disease beyond 6 weeks, cement leakage via the basivertebral and segmental vein, and lower preoperative hemoglobin had more perioperative hidden blood loss.

A Naringin-loaded gelatin-microsphere/nano-hydroxyapatite/silk fibroin composite scaffold promoted healing of critical-size vertebral defects in ovariectomised rat.

In this study, we investigated the effect of three-dimensional of naringin/gelatin microspheres/nano-hydroxyapatite/silk fibroin (NG/GMs/nHA/SF) scaffolds on repair of a critical-size bone defect of lumbar 6 in osteoporotic rats. In this work, a cell-free scaffold for bone-tissue engineering based on a silk fibroin (SF)/nano-hydroxyapatite (nHA) scaffold was developed. The scaffold was fabricated by lyophilization. Naringin (NG) was loaded into gelatin microspheres (GMs), which were encapsulated in the nHA/SF scaffolds. The materials were characterized using x ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy and thermogravimetric analysis. Moreover, the biomechanics, degradation, and drug-release profile of the scaffold were also evaluated. In vitro, the effect of the scaffold on the adhesion, proliferation, and osteogenic differentiation of rat bone marrow mesenchymal stem cells (BMSCs) was evaluated. In vivo, at 3 months after ovariectomy, a critical-size lumbar defect was indued in the rats to evaluate scaffold therapeutic potential. A 3-mm defect in L6 developed in 60 SD rats, which were randomly divided into SF scaffold, nHA/SF scaffold, NG/nHA/SF scaffold, NG/GMs/nHA/SF scaffold, and blank groups (n = 12 each). At 4, 8, 12, and 16 weeks postoperatively, osteogenesis was evaluated by X-ray, micro-computed tomography, hematoxylin-eosin staining, and fast green staining, and by analysis of BMP-2, Runx2, and Ocn protein levels at 16 weeks. In our results, NG/GM/nHA/SF scaffolds exhibited good biocompatibility, biomechanical strength, and promoted BMSC adhesion, proliferation, and calcium nodule formation in vitro. Moreover, NG/GMs/nHA/SF scaffolds showed greater osteogenic differentiation potential than the other scaffolds in vitro. In vivo, gradual new bone formation was observed, and bone defects recovered by 16 weeks in the experimental group. In the blank group, limited bone formation was observed, and the bone defect was obvious. In conclusion, NG/GMs/nHA/SF scaffolds promoted repair of a lumbar 6 defect in osteoporotic rats. Therefore, the NG/GMs/nHA/SF biocomposite scaffold has potential as a bone-defect-filling biomaterial for bone regeneration.

Comparison of Cement Leakage Rate and Severity After Percutaneous Vertebroplasty for Osteoporotic Vertebral Compression Fractures Using Front-Opening Versus Side-Opening Cannulas.

The authors assessed the occurrence and severity of cement leakage (CL) following percutaneous vertebroplasty (PVP) for osteoporotic vertebral compression fractures (OVCFs) performed using front-opening cannulas (FOCs) vs side-opening cannulas (SOCs). This retrospective cohort study included 811 patients with single-level OVCFs who underwent PVP between March 2016 and September 2018. The 264 patients who met the inclusion criteria were divided into two groups according to whether the procedure was performed using a FOC (n=128) or a SOC (n=136). Visual analog scale score, Oswestry Disability Index, local kyphotic angle, vertebral height, amount of bone cement injected, and rate of CL were compared between the groups. Types of CL were classified according to postoperative computed tomography. The CL types were further classified according to severity (mild and severe). Visual analog scale score, Oswestry Disability Index, local kyphotic angle, and vertebral height were all significantly improved after surgery. The total incidence of CL was significantly higher for FOCs than for SOCs (P=.001). Similarly, the occurrence of the CL subtypes was significantly higher for FOCs than for SOCs (B type, P=.033; C type, P=.01; and S type, P=.015). Analysis of CL type severity revealed that the rates of severe D type (intradiskal leakage category of the C type) and severe S type were significantly lower for SOCs than for FOCs (P=.001), while the incidence of severe B type leaks was not significantly different between the groups (P=.443). Percutaneous vertebroplasty performed using SOCs decreases the incidence and severity of D type and S type CL compared with FOCs. Secondary classification of CL could help physicians better understand the severity of leakage and select a more appropriate surgical approach to reduce CL. [Orthopedics. 2021;44(3):134-140.].

Influence of bone cement distribution on outcomes following percutaneous vertebroplasty: a retrospective matched-cohort study.

OBJECTIVE: To evaluate the influence of insufficient bone cement distribution on outcomes following percutaneous vertebroplasty (PVP). METHODS: This retrospective matched-cohort study included patients 50-90 years of age who had undergone PVP for single level vertebral compression fractures (VCFs) from February 2015 to December 2018. Insufficient (Group A)/sufficient (Group B) distribution of bone cement in the fracture area was assessed from pre- and post-operative computed tomography (CT) images. Assessments were before, 3-days post-procedure, and at the last follow-up visit (≥12 months). RESULT: Of the 270 eligible patients, there were 54 matched pairs. On post-operative day 3 and at the last follow-up visit, significantly greater visual analogue scale (VAS) pain scores and Oswestry Disability Index (ODI) scores were obtained in Group B over Group A, while kyphotic angles (KAs) and vertebral height (VH) loss were significantly larger in Group A compared with Group B. Incidence of asymptomatic cement leakage and re-collapse of cemented vertebrae were also greater in Group A compared with Group B. CONCLUSIONS: Insufficient cement distribution may relate to less pain relief and result in progressive vertebral collapse and kyphotic deformity post-PVP.

Fabrication of a Polylactide-Glycolide/Poly-ε-Caprolactone/Dextran/Plastrum Testudinis Extract Composite Anti-Inflammation Nanofiber Membrane via Electrospinning for Annulus Fibrosus Regeneration.

Tissue engineering is a promising approach for the treatment of chronic lower back pain (LBP) caused by intervertebral disc degeneration (IDD) resulting from degeneration and inflammation of annulus fibrosus (AF) tissue. However, scaffold with an anti-inflammatory effect on AF cells has not been reported. In this study, we fabricated a polylactide-glycolide (PLGA)/poly-ε-caprolactone (PCL)Zdextran (DEX) composite membrane loaded with plastrum testudinis extract (PTE), a Traditional Chinese Medicine herbal extract, via electrospinning. The membranes were characterized by mechanical measurements and scanning electron microscopy (SEM). Using an in vitro inflammation model induced by interleukin (IL)-1ß, the cytocompatibility and anti-inflammatory effects of the composites were investigated by CCK-8 assay and flow cytometry. Potential regulatory mechanisms were examined by RT-qPCR and Western blotting. The results showed that the P10P8D2 (PLGA 10 g, PCL 8 g, DEX 2 g) composite nanofiber membrane exhibited the most uniform diameter distribution, best mechanical properties, a moderate degradation rate, and the best cytocompatibility characteristics. The optimal concentration of PTE was 120 µg/mL. Importantly, P10P8D2 combined with PTE exhibited anti-inflammatory and cell proliferation promotion effects. Moreover, the NF-κBB/NLRP3/IL-ß signaling pathway was inactivated. Our findings suggested that the nanofiber membrane composed of P10P8D2 and PTE has anti-inflammatory and pro-proliferation effects on AF cells. It may provide an effective strategy for AF tissue regeneration.

Cement Distribution Patterns in Osteoporotic Vertebral Compression Fractures with Intravertebral Cleft: Effect on Therapeutic Efficacy.

OBJECTIVE: To determine cement distribution patterns on therapeutic efficacy after percutaneous vertebroplasty treatment of osteoporotic vertebral compression fractures (OVCFs) with intravertebral cleft (IVC). METHODS: Patients who were treated with percutaneous vertebroplasty for single OVCFs with IVC and met this study's inclusion criteria were retrospectively reviewed. The follow-up period was at least 2 years. Distribution patterns of cement in the IVC area were respectively specified into 2 groups: group 1: solid lump distribution pattern (n = 22); group 2: the comparatively diffused pattern (n = 90). Radiologic and clinical parameters were analyzed and compared. Then, associations of recollapse with covariates and a risk score were further analyzed and developed to predict recollapse of the augmented vertebrae. RESULTS: At the immediate postoperative period, all patients benefited from significant improvement in vertebrae height and kyphotic angle correction. However, significant recollapse was observed at the 2 years postoperative follow-up for the patients in group 1. Furthermore, we found that preoperative severe kyphotic deformity (a cutoff value of 12.5°), solid lump cement distribution pattern, and larger reduction angle (a cutoff value of 8.3°) was significantly associated with increased risk for recollapse. A risk score was developed based on the number of risk factors present in each patient and the receiver operating characteristic curve of the risk score generated an area under the curve of 0.788 (95% confidence interval 0.702-0.873, P = 0.000). CONCLUSIONS: The comparatively diffused pattern shows better long-term radiologic and clinical outcomes for the treatment for OVCFs with IVC. A risk score can be used to predict the incidence of recollapse.

Therapeutic embolization of meningiomas with Onyx for delayed surgical resection.

BACKGROUND: Liquid embolic agents can achieve penetration of capillaries in tumors and thus may be even more effective at creating tumor necrosis than small particles. This study assesses the safety and efficacy of preoperative embolization of meningiomas with Onyx liquid embolic agent (Micro Therapeutics, Inc, Irvine, Calif) for delayed surgical resection. METHODS: Three cases of hypervascular intracranial meningiomas were treated by preoperative embolization with Onyx embolic agent using superselective catheterization of the feeding arteries from the ECA and the reflux-hold-reinjection technique. RESULTS: Meningiomas were devascularized successfully, and these patients did not present the symptoms of postembolization tumor swelling or hemorrhage before complete resection of the tumors 10 days later. Massive tumor necrosis was observed in all 3 cases of pathologic specimens, and shrinkage of tumor was seen by MRI as early as 8 days in 1 case. All patients had no recurrence of tumor at 12-month follow-up. CONCLUSION: Preoperative embolization with Onyx may be a useful tool for treatment of meningiomas. Palliative embolization treatment of nonresectable hypervascular intracranial tumors with Onyx warrants future clinical investigation.