Chlorpyrifos degradation and its impacts on phosphorus bioavailability in microplastic-contaminated soil.

Pesticide residues and microplastics (MPs) in agricultural soils are two major concerns for soil health and food safety. The degradation of chlorpyrifos (CPF), an organophosphorus pesticide, releases phosphates. This process may be affected by the presence of MPs in the soil. The combination of CPF and MPs presence in the soil may thus produce interaction effects that alter the soil phosphorus (P) balance. This study explores the degradation pathways of CPF (6 mg kg-1, 12 mg kg-1 of CPF addition) in soils with different levels of polylactic acid MPs (PLA-MPs) (0.0 %, 0.1 %, 0.5 %, 1.0 % w/w), and analyzes soil P fractions and phosphatase enzyme activities to investigate soil P bioavailability under different treatments. Results show that the degradation of CPF fits to a first-order decay model, with half-lives (DT50) ranging from 11.0 to 14.8 d depending on PLA-MPs treatment. The concentration of its metabolite 3, 5, 6-trichloropyridine 2-phenol (TCP) reached a peak of 0.93-1.67 mg kg-1 within 7-14 days. Similarly, the degradation of CPF led to a significant transient increase in P bioavailability within 3-7 days (p < 0.05), with a peak range of 22.55-26.01 mg kg-1 for Olsen-P content and a peak range of 4.63-6.76 % for the proportions of available P fractions (H2O-P+NaHCO3-P+NaOH-P), before returning to prior levels (Olsen-P: 11.28-19.52 mg kg-1; available soil P fractions: 4.15-5.61 %). CPF degradation (6 mg kg-1) was significantly inhibited in soil with 1.0 % PLA-MPs addition. The effects of MPs and CPF on soil P fractions occur at different time frames, implying that their modes of action and interactions with soil microbes differ.

Situational simulation teaching effectively improves dental students' non-operational clinical competency and objective structured clinical examination performance.

BACKGROUND: Appropriate communication with dental patients enhances treatment outcomes and patient satisfaction. Implementing simulated patient interviews courses can improve patient-centered care and reduce conflict during clerkship training. Therefore, this study explored the relationship among student participation in a situational simulation course (SSC), academic performance, clerkship performance, and objective structured clinical examination (OSCE) performance. METHODS: This study was conducted with a sample of fifth-year dental students undergoing clerkship training. After implementing a situational simulation course to investigate the relationship among participation in SSC, academic performance, clerkship performance, and OSCE performance, a path analysis model was developed and tested. RESULTS: Eighty-seven fifth-year dental students were eligible for the SSC, and most (n = 70, 80.46%) volunteered to participate. The path analysis model revealed that academic performance had a direct effect on OSCE performance (ß = 0.281, P = 0.003) and clerkship performance (ß = 0.441, P < 0.001). In addition, SSC teaching had a direct effect on OSCE performance (ß = 0.356, P < 0.001). CONCLUSIONS: SSCs can enhance dental students' non-operational clinical competency and OSCE performance effectively. Simulated patient encounters with feedback, incorporated into the dental curricula, have led to improved communication. Based on our findings, we suggest implementing SSC teaching before the OSCE to improve communication and cognitive skills.

Patient perception of service quality to preanesthetic oral examination: a cross-sectional study using the SERVQUAL model.

BACKGROUND: A phase-III interdisciplinary quality improvement program, the preanesthetic oral examination (PAOE), was implemented as a new program in an academic medical center to prevent perioperative dental injuries. This study was aimed at surveying the perceived service quality and satisfaction of patients who had undergone PAOE based on the SERVQUAL model. METHODS: This cross-sectional survey was conducted at the Kaohsiung Medical University Hospital using convenience sampling. Patients referred for PAOE (PAOE group) and those who had voluntarily availed dental services (control group) were recruited. A modified SERVQUAL questionnaire was used to assess the perceived service quality and patient satisfaction with dental services. Cronbach's alpha for SERVQUAL was 0.861. RESULTS: We enrolled 286 (68.8%) and 130 (31.2%) participants in the PAOE and control groups, respectively. The path analysis revealed that the PAOE group scored lower in dimensions of reliability (ß = -0.074, P = 0.003), responsiveness (ß = -0.148, P = 0.006), and empathy (ß = -0.140, P = 0.011). Furthermore, reliability (ß = 0.655, P < 0.001) and responsiveness (ß = 0.147, P = 0.008) showed a direct effect on patient satisfaction. Overall, participants were highly satisfied with the dental services. CONCLUSIONS: The PAOE group showed lower satisfaction and perceived quality of dental services compared to the control group. Although implementing an interdisciplinary program reduces the perceived service quality, its influence is limited. Employing an interdisciplinary teamwork is a win-win strategy encouraged to improve patient safety and reduce malpractice claims. Future suggestions should focus on establishing waiting times that are considered reasonable by patients. Patient-centered education related to the risk of perioperative dental injuries should be provided, and awareness of oral conditions for patient safety should be improved. Moreover, interprofessional education in continuous and undergraduate programs is necessary to improve professional quality.

The impact of Lacticaseibacillus paracasei GMNL-143 toothpaste on gingivitis and oral microbiota in adults: a randomized, double-blind, crossover, placebo-controlled trial.

BACKGROUND: This study examines the oral health benefits of heat-killed Lacticaseibacillus paracasei GMNL-143, particularly its potential in oral microbiota alterations and gingivitis improvement. METHODS: We assessed GMNL-143's in vitro interactions with oral pathogens and its ability to prevent pathogen adherence to gingival cells. A randomized, double-blind, crossover clinical trial was performed on gingivitis patients using GMNL-143 toothpaste or placebo for four weeks, followed by a crossover after a washout. RESULTS: GMNL-143 showed coaggregation with oral pathogens in vitro, linked to its surface layer protein. In patients, GMNL-143 toothpaste lowered the gingival index and reduced Streptococcus mutans in crevicular fluid. A positive relationship was found between Aggregatibacter actinomycetemcomitans and gingival index changes, and a negative one between Campylobacter and gingival index changes in plaque. CONCLUSION: GMNL-143 toothpaste may shift oral bacterial composition towards a healthier state, suggesting its potential in managing mild to moderate gingivitis. TRIAL REGISTRATION: ID NCT04190485 ( https://clinicaltrials.gov/ ); 09/12/2019, retrospective registration.

Acceptance and experience of digital dental technology, burnout, job satisfaction, and turnover intention for Taiwanese dental technicians.

BACKGROUND: Digital dental technology (DDT) has progressed and been introduced to Taiwan in the recent years, gradually changing the industry ecology. Many studies have demonstrated that DDT is more accurate and faster than conventional dental technology. However, there is a paucity of research exploring dental technicians' perspectives on digital dental techniques, and their burnout, job satisfaction, and turnover intention. METHODS: This cross-sectional survey with convenience sampling was conducted at the conference venue of the Taiwan Association of Dental Technology to investigate the perspectives of dental technicians. We used the snowballing method in this study; two sampling methods were adopted, a convenience sampling of dental technicians to complete a survey, followed by asking the survey participants of the convenience sample to invite their colleagues to participate in the online survey. The survey questionnaire included questions on demographics, work-related information, acceptance and experiences of dental technicians toward DDT, occupational burnout, job satisfaction, and turnover intention. Regression models were used to determine the predictors of job satisfaction and determinants of turnover intention. RESULTS: In total, 341 valid questionnaires were obtained. Overall, the participants reported long working hours (95.5%), positive score on the DDT acceptance scale, moderate job satisfaction, higher personal burnout, and work burnout, along with lower over-commitment. Among them, 32.9% and 28.2% reported the intention to leave their organization and profession, respectively. The stepwise multiple regression model revealed that higher work burnout decreased job satisfaction, while higher DDT acceptance and position as employer increased job satisfaction. The binary logistic regression models revealed that geographical area of workplace, work burnout, and job satisfaction were significant predictors of turnover intentions. CONCLUSIONS: Many Taiwanese dental technicians reported turnover intentions and higher burnout. With the trend of digitalization in the dental industry, even though most dental technicians had a positive outlook toward DDT, its influence on job satisfaction appears limited. Retaining good and professional talents required of a dental technician is crucial, especially as Taiwan's dental care becomes increasingly specialized. Strategies for improving the work environment and occupational health of dental technicians should thus be the focus of future studies.

Changes in dental hygiene students' working posture following digital sound feedback.

INTRODUCTION: This study aimed to observe changes in working posture by measuring the REBA (Rapid Entire Body Assessment) score of dental hygiene students according to digital sound feedback linked with a smartphone application. METHODS: This study was conducted on 28 fourth-year dental hygiene students who received theoretical and practical training on dental posture in the second year and then practised on mannequins and patients for about four semesters. Periodontal instrumentation was performed freely by applying digital sound notification feedback for four weeks after baseline, 30 minutes per week. REBA was measured after performing periodic structure construction without providing digital sound notification feedback for the last 1-2 minutes. Follow-up was conducted the same way 2-3 weeks after the intervention period. RESULTS: The REBA score for total, neck and trunk of all subjects showed statistically significant decreases post-intervention compared with the baseline scores (total p < .001, neck p < .001 and trunk p = .042). CONCLUSIONS: A digital sound feedback system was shown to be effective in encouraging correct working posture in dental hygiene students by helping them improve their REBA scores.

Research on dental plaque removal methods for efficient oral prophylaxis: With a focus on air polishing and rubber cup polishing.

OBJECTIVES: This study was conducted to compare the plaque control effectiveness of rubber cup polishing with that of air polishing during oral prophylaxis procedures and to investigate the effect of the order of air-polishing application on the efficiency of oral prophylaxis. METHODS: The study included adult patients (≥20 years of age) who had visited the dental clinic for oral prophylaxis. A total of 173 subjects were divided into three groups (scaling followed by rubber cup polishing, SR; scaling followed by air polishing, SA; and air polishing followed by scaling, AS) based on sex, age, oral health status, oral hygiene status, and indications and contraindications according to the oral prophylaxis method. The analysis of variance (ANOVA) was used to determine the difference in oral prophylaxis time, residual deposits rate, subjects and dental hygienist satisfaction. RESULTS: The total scaling time was shorter in the AS group (15.4 ± 6.9 minutes) than in the SA (18.7 ± 5.5 minutes) and SR groups (19.9 ± 6.2 minutes) (p < 0.05). The rate of residual deposits was significantly higher in the SR group than in the AS or SA groups (p < 0.05). The satisfaction level of dental hygienists was higher in the AS group (8.8 ± 1.0 points) and the SA group (8.4 ± 1.0 points) than in the SR group (6.2 ± 1.3 points). CONCLUSION: During oral prophylaxis, dental plaque removal using air polishing requires a relatively longer time when compared to rubber cup polishing, but it can better eliminate dental plaque. In addition, we found that dental plaque removal using air polishing prior to scaling reduced the total scaling time.

Amino Acid-Linked Low Molecular Weight Polyethylenimine for Improved Gene Delivery and Biocompatibility.

The construction of efficient and low toxic non-viral gene delivery vectors is of great significance for gene therapy. Herein, two novel polycations were constructed via Michael addition from low molecular weight polyethylenimine (PEI) 600 Da and amino acid-containing linkages. Lysine and histidine were introduced for the purpose of improved DNA binding and pH buffering capacity, respectively. The ester bonds afforded the polymer biodegradability, which was confirmed by the gel permeation chromatography (GPC) measurement. The polymers could well condense DNA into nanoparticles and protect DNA from degradation by nuclease. Compared with PEI 25 kDa, these polymers showed higher transfection efficiency, lower toxicity, and better serum tolerance. Study of this mechanism revealed that the polyplexes enter the cells mainly through caveolae-mediated endocytosis pathway; this, together with their biodegradability, facilitates the internalization of polyplexes and the release of DNA. The results reveal that the amino acid-linked low molecular weight PEI polymers could serve as promising candidates for non-viral gene delivery.

Influence of cavity depth and restoration of non-carious cervical root lesions on strain distribution from various loading sites.

BACKGROUND: We aimed to investigate the load-induced strain variation in teeth with unrestored and resin-based composite restored non-carious cervical lesions (NCCLs). METHODS: Twelve extracted premolars were provided for measuring buccal-side root NCCLs. Strain gauges were fixed at four measuring sites of each tooth, two at the buccal surface and two at the lingual surface. NCCLs were prepared with occlusal margins at the cemento-enamel junction. A static 9-kg load was applied at seven occlusal loading points: buccal cusp tip (BC), inner inclination of the BC, lingual cusp tip (LC), inner inclination of the LC, center of the mesial marginal ridge or distal marginal ridge, and center of the central groove. The strain was detected at each site in teeth with NCCL depths of 0 (control), 0.5, 1.0, and 1.5 mm. Each NCCL was restored using an adhesive composite resin, and the strains were re-measured. RESULTS: The strains at the NCCL occlusal and gingival margins decreased with increasing defect depths, and the effect was significant when the depth of the defect was 1.5 mm. Loading on the buccal and lingual cusps induced prominent strain variation. The strains at all depth distribution recovered to nearly intact conditions when the NCCLs were restored. CONCLUSIONS: NCCLs at 1.5 mm depth are detrimental, but they can be restored using resin composites. CLINICAL SIGNIFICANCE: The existence of NCCLs should not be ignored. The depth of the NCCL may affect the progression of the lesion. Resin composite restoration is an appropriate method for preventing persistent NCCL deterioration.

Effect of Anchor Length on the Pullout Strength of Palatal Mini Implants.

PURPOSE: The aim of this study was to evaluate the pullout strength of 3 different orthodontic mini implants. MATERIALS AND METHODS: Twenty-seven mini implants (diameter: 2 mm, length: 7 mm) were implanted into artificial bone (Sawbones; Pacific Research Laboratories Inc.) at depths of 3, 4, and 5 mm. The insertion torque (IT), resonance frequency (RF), pullout strength (PS), and anchor length (AL) were measured. One-way analysis of variance with Tukey honest significant difference (HSD) postcomparison were used to detect intergroup differences. The null hypothesis was that IT, RF, and PS would significantly correlate in the same brand. RESULTS: In the implantation depths (ID) (5 and 4 mm), IT of Types C (16.67 and 14.33 N·cm) and Type B (14 and 13.33 N·cm) were significantly higher than Type A (10.33 and 9.33 N·cm). Type A had a largest AL and PS at the IDs (5 and 4 mm). In the IDs (3 mm), PS was no different. Type C had no correlation among the RF, IT, and PS. Therefore, null hypothesis was rejected. CONCLUSION: AL exerted crucial effects on the PS of the mini implants.

Arsenic Trioxide-Induced Mandibular Osteomyelitis.

Previously, arsenic was a popular devitalizing agent used to necrotize inflamed dental pulp to lower the pulp sensitivity owing to the unavailability of appropriate anesthesia. However, leakage from the apical foramen, lateral or accessory canals, or cracks in the tooth is common. This can be dangerous because of the reportedly high toxic effects of arsenic in both hard and soft tissues, leading to gingival and osseous necrosis and, consequently, osteomyelitis. Therefore, arsenic can prove fatal for both bones and teeth and is no longer used. We encountered a case involving a 50-year-old man who had developed mandibular osteomyelitis with lower lip paresthesia caused by arsenic trioxide used during endodontic treatment. The patient was treated with appropriate antibiotics, adjunctive hyperbaric oxygen therapy, and adequate surgical debridement. Hyperbaric oxygen therapy can induce neovascularization in necrosed tissues and improve bone and soft tissue healing. At a 4-year follow-up visit, bone healing was observed, with restoration of periodontal health, although the paresthesia had persisted. We describe this case, present a review of the relevant published data, and discuss the possible causes, diagnosis, treatment, and follow-up protocol of mandibular osteomyelitis caused by arsenic trioxide.

Inducing cyclooxygenase-2 expression, prostaglandin E2 and prostaglandin F2α production of human dental pulp cells by activation of toll-like receptor-3, mitogen-activated protein kinase kinase/extracellular signal-regulated kinase and p38 signaling.

Background/purpose: Bacterial infection was the major etiology for pulpal/root canal infection. This study aimed to investigate the activation of toll-like receptor-3 (TLR) on cyclooxygenase-2 (COX-2) expression and prostaglandin E2 (PGE2) and PGF2α production of human dental pulp cells (HDPCs) and associated signaling. Materials and methods: HDPCs were exposed to different concentrations of Poly (I:C) (a TLR3 activator). Cell viability was determined by 3- (4,5-Dimethylthiazol-2-yl)-2,5- diphenyltetrazolium bromide (MTT) assay and alkaline phosphatase (ALP) activity was evaluated by ALP staining. Activation of extracellular signal-regulated kinase (ERK) and p38 by Poly (I:C) was determined by immunofluorescent staining. The COX-2 protein expression was analyzed by Western blot. PGE2 and PGF2α production was measured by enzyme-linked immunosorbent assay. The mRNA expression was studied by real-time polymerase-chain reaction. Moreover, HDPCs were exposed to Poly(I:C) with/without U0126 or SB203580 treatment and analysis of COX-2 expression and prostanoid production were conducted. Results: Poly (I:C) showed little effect on ALP activity, but decreased viability of HDPCs. It stimulated COX-2 mRNA and protein expression. Poly (I:C) induced PGE2 and PGF2α production of HDPCs. Poly (I:C) activated p-ERK, and p-p38 protein expression. Treatment by U0126 (a mitogen-activated protein kinase kinase (MEK)/ERK inhibitor) and SB203580 (a p38 inhibitor) attenuated Poly (I:C)-induced COX-2 mRNA and protein expression as well as PGE2 and PGF2α production. Conclusion: TLR3 activation is involved in the infection and inflammatory responses of pulp tissues, via MEK/ERK, and p38 signaling to mediate COX-2 expression as well as PGE2 and PGF2α production, contributing to the pathogenesis and progression of pulpal/periapical diseases.

Effects of microplastics and chlorpyrifos on earthworms (Lumbricus terrestris) and their biogenic transport in sandy soil.

Although microplastics (MPs) are ubiquitous in agricultural soil, little is known about the effects of MPs combined with pesticides on soil organisms and their biogenic transport through the soil profile. In this study, we conducted mesocosm experiments to observe the effects of microplastics (polyethylene (LDPE-MPs) and biodegradable microplastics (Bio-MPs)) and chlorpyrifos (CPF) on earthworm (Lumbricus terrestris) mortality, growth and reproduction, as well as the biogenic transport of these contaminants through earthworm burrows. The results showed that earthworm reproduction was not affected by any treatment, but earthworm weight was reduced by 17.6% and the mortality increased by 62.5% in treatments with 28% Bio-MPs. Treatments with 28% LDPE-MPs and 7% Bio-MPs combined with CPF showed greater toxicity while the treatment with 28% Bio-MPs combined with CPF showed less toxicity on earthworm growth as compared to treatments with only MPs. The treatments with 1250 g ha-1 CPF and 28% Bio-MPs significantly decreased the bioaccumulation of CPF in earthworm bodies (1.1 ± 0.2%, w w-1), compared to the treatment with CPF alone (1.7 ± 0.4%). With CPF addition, more LDPE-MPs (8%) were transported into earthworm burrows and the distribution rate of LDPE-MPs in deeper soil was increased. No effect was observed on the transport of Bio-MPs. More CPF was transported into soil in the treatments with LDPE-MPs and Bio-MPs, 5% and 10% of added CPF, respectively. In addition, a lower level of the CPF metabolite 3,5,6-trichloropyridinol was detected in soil samples from the treatments with MPs additions than without MP additions, indicating that the presence of MPs inhibited CPF degradation. In conclusion, Bio-MPs caused significant toxicity effects on earthworms and the different types of MPs combined with CPF affected earthworms differently, and their transport along the soil profile. Thus, further research is urgently needed to understand the environmental risks of MPs and MP-associated compounds in the soil ecosystem.

The role of microplastic aging on chlorpyrifos adsorption-desorption and microplastic bioconcentration.

Microplastics (MPs) in soil undergo different aging processes such as photoaging, mechanical abrasion and biodegradation, leading to alterations in the surface properties of MPs. In this study, we investigated the adsorption-desorption of chlorpyrifos (CPF) on pristine and UV light-aged low-density polyethylene (LDPE) and biodegradable (Bio) MPs that were derived from plastic mulch films. We also tested the bioconcentration of pristine and aged MPs (LDPE- and Bio-MPs aged under UV light and LDPE-MPs aged in three different soils) associated with CPF by earthworms (Lumbricus terrestris). The results showed that UV-aged MPs showed higher CPF adsorption capacities than pristine MPs, with the adsorption capacities at 184.9 ± 5.3, 200.5 ± 1.8, 193.0 ± 8.7, and 215.9 ± 1.1 µg g-1 for pristine LDPE-, UV-aged LDPE-, pristine Bio- and UV-aged Bio-MPs, respectively. The desorption rate of CPF from UV-aged LDPE-MPs within 48 h was lower than the desorption from pristine ones (28.8 ± 7.7% vs. 40.0 ± 3.9%), while both pristine and UV-aged Bio-MPs showed very low CPF desorption rates. A 4-day Petri dish experiment showed that UV-aged MPs were significantly less concentrated in earthworm casts than pristine counterparts (52% and 36% lower for UV-aged LDPE- and Bio-MPs), while UV-aged MPs with adsorbed CPF were concentrated significantly more than UV-aged MPs without CPF. Interestingly, LDPE-MPs aged in soil with a high carbon, nitrogen, and carbon-to-nitrogen ratio were significantly more concentrated in earthworm casts than pristine LDPE-MPs. In conclusion, UV-aged MPs acted as stronger vectors for CPF than pristine MPs. The bioconcentration of MPs differed significantly due to microplastic aging, as well as the combined effect with CPF. Moreover, LDPE-MPs aged in soil with enriched carbon and nitrogen were significantly concentrated in earthworm casts. Further studies on the environmental behaviours of aged MPs associated with other pollutants in soil, especially soils high in carbon and nitrogen, are needed.

Comparison of the plaque-removal efficacy of ultra-soft single-headed, triple-headed, and T-shaped toothbrushes and the subjective perceptions of users.

PURPOSE: To compare the plaque-removal efficacy of ultra-soft single-headed, triple-headed, and T-shaped toothbrushes and the subjective perceptions of users. METHODS: In this randomized, single-blind, crossover study, 30 healthy adult participants were randomly divided into three groups of 10, who tested the three types of toothbrushes in differing order, with a 1-week washout period between the tests. Dental plaque scores were recorded before and after toothbrushing, and questionnaires on subjective perceptions after toothbrushing were collected. RESULTS: The participants included 16 female participants and 14 male participants (average age: 29.4 ± 6.7 years). All three toothbrush types were effective in reducing dental plaque by 36-46%; however, the cleaning effect of the ultra-soft single-headed toothbrush was inferior to that of the triple-headed and T-shaped toothbrushes, the difference being statistically significant. The users' subjective perceptions suggested that the ultra-soft single-headed toothbrush was significantly superior to the other two toothbrush types. Plaque scores for the lower posterior tooth surfaces were higher than those for the upper posterior tooth surfaces, particularly on the left side, for both the ultra-soft single-headed and T-shaped toothbrushes. CONCLUSION: Healthcare practitioners should identify the type of toothbrush bristles used by individuals and provide appropriate oral health information.

Effects of denture maintenance on satisfaction levels of Taiwanese elderly using removable partial dentures: a pilot study.

OBJECTIVE: The aim of this study was to evaluate the correlation between patient satisfaction with removable partial dentures and denture maintenance by patients, including regular application of denture adhesives and cleansers. BACKGROUND: The success of removable partial dentures depends on patient satisfaction with dentures and their regular denture maintenance. MATERIALS AND METHODS: Demographic information, the Oral Impacts on Daily Performance (OIDP) indicator and details of denture maintenance (including the use of denture cleansers and adhesives) were collected from 193 (41.5% men and 58.5% women) participants by using questionnaires. A dentist performed oral examinations to evaluate denture function according to the OIDP items photographically and recorded the number of remaining teeth and Kennedy's classification. RESULTS: Most participants were satisfied with their removable partial dentures and tended to have higher satisfaction levels than the dentist's estimation. Further, those using denture adhesives and cleansers had higher satisfaction levels than those not using such denture maintenance. CONCLUSIONS: Appropriate education regarding denture use is important because regular denture maintenance by patients affects their degree of satisfaction with dentures, as well as the dentist's skill and the patient's oral condition. Dentists could use this information to predict the potential success of dentures.

Multistage-Responsive Nanocomplexes Attenuate Ulcerative Colitis by Improving the Accumulation and Distribution of Oral Nucleic Acid Drugs in the Colon.

Oral gene therapy has emerged as a potential optimal treatment for ulcerative colitis (UC). Nucleic acid drugs possessing versatility can not only inhibit inflammation but realize colon mucosal healing, fulfilling the clinical objective of UC therapy. However, the effective accumulation and distribution of oral nucleic acid drugs in the colon remain a considerable challenge. Furthermore, current delivery systems pay more attention to the accumulation of nucleic acid drugs in the colon, while the distribution of nucleic acid drugs in the colon, which plays a key role in the UC treatment, never catches the attention of researchers. Here, we used miR-320 as a model nucleic acid drug to develop a kind of multistage-responsive nanocomplexes (MSNs) based on polymeric nanocapsules and alginate. MSNs possess the pH responsiveness in the stomach, the enzyme responsiveness in the colonic lumen, and the redox responsiveness in the cytoplasm. In vivo imaging results showed that MSNs reach the colon within 2 h and effectively release miR-320 nanocapsules in the colonic lumen. The nanocapsules can further deliver miR-320 to the submucosal layer and even the muscular layer. Moreover, MSNs decreased the activity of myeloperoxidase and proinflammatory cytokines and exhibited anti-inflammatory activity by inhibiting the phosphorylation of IκBα and AKT, reducing colonic inflammation and enhancing mucosal repair. Therefore, MSNs can successfully alleviate UC by improving the accumulation and distribution of oral nucleic acid drugs in the colon, promoting the clinical translational application of nucleic acid drugs in the treatment of UC.

Identification and characterization of a novel class of extracellular poly(3-hydroxybutyrate) depolymerase from Bacillus sp. strain NRRL B-14911.

The catalytic, linker, and denatured poly(3-hydroxybutyrate) (dPHB)-binding domains of bacterial extracellular PHB depolymerases (PhaZs) are classified into several different types. We now report a novel class of extracellular PHB depolymerase from Bacillus sp. strain NRRL B-14911. Its catalytic domain belongs to type 1, whereas its putative linker region neither possesses the sequence features of the three known types of linker domains nor exhibits significant amino acid sequence similarity to them. Instead, this putative linker region can be divided into two distinct linker domains of novel types: LD1 and LD2. LD1 shows significant amino acid sequence similarity to certain regions of a large group of PHB depolymerase-unrelated proteins. LD2 and its homologs are present in a small group of PhaZs. The remaining C-terminal portion of this PhaZ can be further divided into two distinct domains: SBD1 and SBD2. Each domain showed strong binding to dPHB, and there is no significant sequence similarity between them. Each domain neither possesses the sequence features of the two known types of dPHB-binding domains nor shows significant amino acid sequence similarity to them. These unique features indicate the presence of two novel and distinct types of dPHB-binding domains. Homologs of these novel domains also are present in the extracellular PhaZ of Bacillus megaterium and the putative extracellular PhaZs of Bacillus pseudofirmus and Bacillus sp. strain SG-1. The Bacillus sp. NRRL B-14911 PhaZ appears to be a representative of a novel class of extracellular PHB depolymerases.

Application of the Oral Health Impact Profile (OHIP) among Taiwanese elderly.

PURPOSE: To validate the Chinese (Taiwan) version of the Oral Health Impact Profile (OHIP-49T) and develop a short form of the OHIP (OHIP-14T) for the elderly. METHODS: A total of 1402 subjects, aged 65 and above, received a personal interview and oral examination. Internal consistency, measured by Cronbach's alpha, and test-retest reliability were assessed by intra-class correlation coefficient (ICC) during a 2-week interval. The criterion-related validity of OHIP-49T was evaluated through associations between the OHIP-49 score with prosthetic need and prosthetic status. A subset (OHIP-14T) questionnaire, derived through a controlled regression procedure, was compared with the original OHIP-14 by Slade (OHIP-14S). RESULTS: The Cronbach's alpha and ICC values were 0.97 and 0.98 for OHIP-49T and 0.90 and 0.93 for OHIP-14T. Mean scores of the OHIP-49T were significantly associated with prosthetic status (P = 0.0013) and prosthetic need (P = 0.0004), which were examined by dentists. The OHIP-14T score had stronger discriminatory ability than OHIP-14S. CONCLUSIONS: The OHIP-49T showed satisfactory reliability and validity for this Taiwanese elderly population. The OHIP-14T is more effective to measure OHRQoL than OHIP-14S.

Changes in the transverse dimensions by vertical ramus osteotomy after mandibular prognathism correction.

OBJECTIVE: A harmonious face displays not only a good lateral profile but also a pleasant frontal appearance. The purpose of the current study was to evaluate the changes in the transverse dimensions by vertical ramus osteotomy (VRO) in the treatment of mandibular prognathism correction. METHODS: Twenty patients who underwent mandibular prognathism correction by VRO were included. Lateral and frontal cephalometric radiographs were obtained at the following stages: preoperative (T1), immediately after the surgery (T2), and completion of orthodontic treatment (T3). Three linear measurements (menton, intercondylion, and intergonial distances) and the ramus angle were compared from T1 to T3. RESULTS: A final mean menton setback of 12.2 mm and upward movement of 0.3 mm were noted. The intercondylion and intergonial distances significantly increased by 5.1 and 7.1 mm, respectively. Without significant difference, ramus angles decreased 1.7 degrees in the right side and 0.1 degrees in the left side. CONCLUSION: The surgical correction of mandibular prognathism using VRO led to an increase in the transverse dimensions.