Biodegradable Piezoelectric Force Sensor.

Measuring vital physiological pressures is important for monitoring health status, preventing the buildup of dangerous internal forces in impaired organs, and enabling novel approaches of using mechanical stimulation for tissue regeneration. Pressure sensors are often required to be implanted and directly integrated with native soft biological systems. Therefore, the devices should be flexible and at the same time biodegradable to avoid invasive removal surgery that can damage directly interfaced tissues. Despite recent achievements in degradable electronic devices, there is still a tremendous need to develop a force sensor which only relies on safe medical materials and requires no complex fabrication process to provide accurate information on important biophysiological forces. Here, we present a strategy for material processing, electromechanical analysis, device fabrication, and assessment of a piezoelectric Poly-l-lactide (PLLA) polymer to create a biodegradable, biocompatible piezoelectric force sensor, which only employs medical materials used commonly in Food and Drug Administration-approved implants, for the monitoring of biological forces. We show the sensor can precisely measure pressures in a wide range of 0-18 kPa and sustain a reliable performance for a period of 4 d in an aqueous environment. We also demonstrate this PLLA piezoelectric sensor can be implanted inside the abdominal cavity of a mouse to monitor the pressure of diaphragmatic contraction. This piezoelectric sensor offers an appealing alternative to present biodegradable electronic devices for the monitoring of intraorgan pressures. The sensor can be integrated with tissues and organs, forming self-sensing bionic systems to enable many exciting applications in regenerative medicine, drug delivery, and medical devices.

Design Strategy for Porous Composites Aimed at Pressure Sensor Application.

Flexible and highly sensitive pressure sensors have versatile biomedical engineering applications for disease diagnosis and healthcare. The fabrication of such sensors based on porous structure composites usually requires complex, costly, and nonenvironmentally friendly procedures. As such, it is highly desired to develop facile, economical, and environment-friendly fabrication strategies for highly sensitive lightweight pressure sensors. Herein, a novel design strategy is reported to fabricate porous composite pressure sensors via a simple heat molding of conductive fillers and thermoplastic polyurethane (TPU) powders together with commercially available popcorn salts followed by water-assisted salt removal. The obtained TPU/carbon nanostructure (CNS) foam sensors have a linear resistance response up to 60% compressive strain with a gauge factor (GF ) of 1.5 and show reversible and reproducible piezoresistive properties due to the robust electrically conductive pathways formed on the foam struts. Such foam sensors can be potentially utilized for guiding squatting exercises and respiration rate monitoring in daily physical training.

Janus and Heteromodulus Elastomeric Fiber Mats Feature Regulable Stress Redistribution for Boosted Strain Sensing Performance.

Wearable strain sensors have huge potential for applications in healthcare, human-machine interfacing, and augmented reality systems. However, the nonlinear response of the resistance signal to strain has caused considerable difficulty and complexity in data processing and signal transformation, thus impeding their practical applications severely. Herein, we propose a simple way to achieve linear and reproducible resistive signals responding to strain in a relatively wide strain range for flexible strain sensors, which is achieved via the fabrication of Janus and heteromodulus elastomeric fiber mats with micropatterns using microimprinting second processing technology. In detail, both isotropic and anisotropic fiber mats can turn into Janus fiber mats with periodical and heteromodulus micropatterns via controlling the fiber fusion and the diffusion of local macromolecular chains of thermoplastic elastomers. The Janus heterogeneous microstructure allows for stress redistribution upon stretching, thus leading to lower strain hysteresis and improved linearity of resistive signal. Moreover, tunable sensing performance can be achieved by tailoring the size of the micropatterns on the fiber mat surface and the fiber anisotropy. The Janus mat strain sensors with high signal linearity and good reproducibility have a very low strain detection limit, enabling potential applications in human-machine interfacing and intelligent control fields if combined with a wireless communication module.

Catalyst-Free Mechanochemical Recycling of Biobased Epoxy with Cellulose Nanocrystals.

Mechanochemical vitrimerization, as a method to recycle cross-linked thermosets by converting the permanent network into a recyclable and reprocessable vitrimer network, inevitably requires a catalyst to accelerate the bond exchange reactions. Here, we demonstrate a catalyst-free approach to achieve the recycling of a cross-linked biobased epoxy into high-performance nanocomposites with cellulose nanocrystals (CNCs). CNCs provide abundant free hydroxyl groups to promote the transesterification exchange reactions while also acting as reinforcing fillers for the resultant nanocomposites. This technique introduces an effective way to fabricate high-performance thermoset nanocomposites based on recycled polymers in an ecofriendly way, promoting the recycle and reuse of thermosets as sustainable nanocomposites for different applications.

Aligned wave-like elastomer fibers with robust conductive layers via electroless deposition for stretchable electrode applications.

Flexible wearable electronics play an important role in the healthcare industry due to their unique skin affinity, portability and breathability. Despite great progress, it still remains a big challenge to facilely fabricate stretchable electrodes with low resistance, excellent stability and a wide tensile range. Here, we propose a handy and time-saving strategy for the fabrication of elastomeric films consisting of wave-like fibers with a robust conductive layer of silver nanoparticles (AgNPs) immobilized using polydopamine (PDA) and silicone rubber (SR). To realize better stretchability, electrospun thermoplastic polyurethane (TPU) mats with oriented nanofibers were treated via ethanol to achieve a wavy structure, which also allowed for the decoration of AgNP precursors on the TPU surface via PDA assisted electroless deposition (ELD). Therefore, the electrodes achieved a stretchability of 120% with high electrical conductivity (486 S cm-1). The films with a reduction time of 30 min showed superior electrical conductivity indicated by a resistance increase of only 100% within 50% strain. The TPU/PDA/AgNP/SR composites with a shorter reduction time of silver precursors could monitor human motions as wearable strain sensors with a wide work strain range (0-98%) and a high sensitivity (with a gauge factor (GF) of up to 81.76) for a strain of 80-98%. Therefore, they are an excellent candidate for potential application in prospective stretchable electronics.

Redox-Mediated Artificial Non-Enzymatic Antioxidant MXene Nanoplatforms for Acute Kidney Injury Alleviation.

Acute kidney injury (AKI), as a common oxidative stress-related renal disease, causes high mortality in clinics annually, and many other clinical diseases, including the pandemic COVID-19, have a high potential to cause AKI, yet only rehydration, renal dialysis, and other supportive therapies are available for AKI in the clinics. Nanotechnology-mediated antioxidant therapy represents a promising therapeutic strategy for AKI treatment. However, current enzyme-mimicking nanoantioxidants show poor biocompatibility and biodegradability, as well as non-specific ROS level regulation, further potentially causing deleterious adverse effects. Herein, the authors report a novel non-enzymatic antioxidant strategy based on ultrathin Ti3 C2 -PVP nanosheets (TPNS) with excellent biocompatibility and great chemical reactivity toward multiple ROS for AKI treatment. These TPNS nanosheets exhibit enzyme/ROS-triggered biodegradability and broad-spectrum ROS scavenging ability through the readily occurring redox reaction between Ti3 C2 and various ROS, as verified by theoretical calculations. Furthermore, both in vivo and in vitro experiments demonstrate that TPNS can serve as efficient antioxidant platforms to scavenge the overexpressed ROS and subsequently suppress oxidative stress-induced inflammatory response through inhibition of NF-κB signal pathway for AKI treatment. This study highlights a new type of therapeutic agent, that is, the redox-mediated non-enzymatic antioxidant MXene nanoplatforms in treatment of AKI and other ROS-associated diseases.

Nanofibrillar Poly(vinyl alcohol) Ionic Organohydrogels for Smart Contact Lens and Human-Interactive Sensing.

Hydrogel bioelectronics as one of the next-generation wearable and implantable electronics ensures excellent biocompatibility and softness to link the human body and electronics. However, volatile, opaque, and fragile features of hydrogels due to the sparse and microscale three-dimensional network seriously limit their practical applications. Here, we report a type of smart and robust nanofibrillar poly(vinyl alcohol) (PVA) organohydrogels fabricated via one-step physical cross-linking. The nanofibrillar network cross-linked by numerous PVA nanocrystallites enables the formation of organohydrogels with high transparency (90%), drying resistance, high toughness (3.2 MJ/m3), and tensile strength (1.4 MPa). For strain sensor application, the PVA ionic organohydrogel after soaking in NaCl solution shows excellent linear sensitivity (GF = 1.56, R2 > 0.998) owing to the homogeneous nanofibrillar PVA network. We demonstrate the potential applications of the nanofibrillar PVA-based organohydrogel in smart contact lens and emotion recognition. Such a strategy paves an effective way to fabricate strong, tough, biocompatible, and ionically conductive organohydrogels, shedding light on multifunctional sensing applications in next-generation flexible bioelectronics.

Flexible Anti-Biofouling MXene/Cellulose Fibrous Membrane for Sustainable Solar-Driven Water Purification.

Solar-driven interfacial water evaporation is regarded as an effective, renewable, and environment-friendly technology for clean water production. However, biofouling caused by the nonspecific interaction between the steam generator and biofoulants generally hinders the efficient application of wastewater treatment. Herein, this work reports a facile strategy to fabricate flexible anti-biofouling fibrous photothermal membrane consisting of a MXene-coated cellulose membrane for highly efficient solar-driven water steam evaporation toward water purification applications. The as-prepared MXene/cellulose photothermal membrane exhibits light absorption efficiency as high as ∼94% in a wide solar spectrum range and a water evaporation rate up to 1.44 kg m-2 h-1 under one solar illumination. Also, the MXene/cellulose membrane shows very high antibacterial efficiency (above 99.9%) owing to the MXene coating as a highly effective bacteriostatic agent. Such a flexible, anti-biofouling, and high-efficiency photothermal membrane sheds light on practical applications in long-term wastewater treatments.

Multifunctional Fe3O4@polydopamine core-shell nanocomposites for intracellular mRNA detection and imaging-guided photothermal therapy.

Multifunctional nanocomposites have the potential to integrate sensing, diagnostic, and therapeutic functions into a single nanostructure. Herein, we synthesize Fe3O4@polydopamine core-shell nanocomposites (Fe3O4@PDA NCs) through an in situ self-polymerization method. Dopamine, a melanin-like mimic of mussel adhesive proteins, can self-polymerize to form surface-adherent polydopamine (PDA) films onto a wide range of materials including Fe3O4 nanoparticles used here. In such nanocomposites, PDA provides a number of advantages, such as near-infrared absorption, high fluorescence quenching efficiency, and a surface for further functionalization with biomolecules. We demonstrate the ability of the Fe3O4@PDA NCs to act as theranostic agents for intracellular mRNA detection and multimodal imaging-guided photothermal therapy. This work would stimulate interest in the use of PDA as a useful material to construct multifunctional nanocomposites for biomedical applications.