RESUMEN
Biosourced and biodegradable polymers for additive manufacturing could enable the rapid fabrication of parts for a broad spectrum of applications ranging from healthcare to aerospace. However, a limited number of these materials are suitable for vat photopolymerization processes. Herein, we report a two-step additive manufacturing process to fabricate robust protein-based constructs using a commercially available laser-based stereolithography printer. Methacrylated bovine serum albumin (MA-BSA) was synthesized and formulated into aqueous resins that were used to print complex three-dimensional (3D) objects with a resolution comparable to a commercially available resin. The MA-BSA resins were characterized by rheometry to determine the viscosity and the cure rate, as both parameters can ultimately be used to predict the printability of the resin. In the first step of patterning these materials, the MA-BSA resin was 3D printed, and in the second step, the printed construct was thermally cured to denature the globular protein and increase the intermolecular noncovalent interactions. Thus, the final 3D printed part was comprised of both chemical and physical cross-links. Compression studies of hydrated and dehydrated constructs demonstrated a broad range of compressive strengths and Young's moduli that could be further modulated by adjusting the type and amount of co-monomer. The printed hydrogel constructs demonstrated good cell viability (>95%) after a 21 day culture period. These MA-BSA resins are expected to be compatible with other vat photopolymerization techniques including digital light projection and continuous liquid interface production.
Asunto(s)
Hidrogeles/química , Plásticos/química , Impresión Tridimensional , Albúmina Sérica Bovina/química , Animales , Supervivencia Celular , Dicroismo Circular , Reactivos de Enlaces Cruzados/química , Ensayo de Materiales , Metacrilatos , Ratones , Células 3T3 NIH , Compuestos Organometálicos/química , Polietilenglicoles/química , Polimerizacion , Resinas Sintéticas/química , Estereolitografía/instrumentación , ViscosidadRESUMEN
Charcot-Marie-Tooth disease type 4H (CMT4H) is an autosomal recessive demyelinating subtype of peripheral enuropathies caused by mutations in the FGD4 gene. Most CMT4H patients are in consanguineous Mediterranean families characterized by early onset and slow progression. We identified two CMT4H patients from a Korean CMT cohort, and performed a detailed genetic and clinical analysis in both cases. Both patients from nonconsanguineous families showed characteristic clinical manifestations of CMT4H including early onset, scoliosis, areflexia, and slow disease progression. Exome sequencing revealed novel compound heterozygous mutations in FGD4 as the underlying cause in both families (p.Arg468Gln and c.1512-2A>C in FC73, p.Met345Thr and c.2043+1G>A (p.Trp663Trpfs*30) in FC646). The missense mutations were located in highly conserved RhoGEF and PH domains which were predicted to be pathogenic in nature by in silico modeling. The CMT4H occurrence frequency was calculated to 0.7% in the Korean demyelinating CMT patients. This study is the first report of CMT4H in Korea. FGD4 assay could be considered as a means of molecular diagnosis for sporadic cases of demyelinating CMT with slow progression.
Asunto(s)
Enfermedad de Charcot-Marie-Tooth/genética , Proteínas de Microfilamentos/genética , Secuencia de Aminoácidos , Pueblo Asiatico/genética , Análisis Mutacional de ADN , Femenino , Heterocigoto , Humanos , Masculino , Persona de Mediana Edad , Datos de Secuencia Molecular , Mutación , Linaje , República de Corea , Adulto JovenRESUMEN
A nanopatterned interdigitated electrode array (nanoIEA)-based impedance assay is developed for quantitative real-time measurement of aligned endothelial cell (EC) barrier functions in vitro. A bioinspired poly(3,4-dihydroxy-L-phenylalanine) (poly (l-DOPA)) coating is applied to improve the human brain EC adhesion onto the Nafion nanopatterned surfaces. It is found that a poly (l-DOPA)-coated Nafion grooved nanopattern makes the human brain ECs orient along the nanopattern direction. Aligned human brain ECs on Nafion nanopatterns exhibit increased expression of genes encoding tight and adherens junction proteins. Aligned human brain ECs also have enhanced impedance and resistance versus unaligned ones. Treatment with a glycogen synthase kinase-3 inhibitor (GSK3i) further increases impedance and resistance, suggesting synergistic effects occur on the cell-cell tightness of in vitro human brain ECs via a combination of anisotropic matrix nanotopography and GSK3i treatment. It is found that this enhanced cell-cell tightness of the combined approach is accompanied by increased expression of claudin protein. These data demonstrate that the proposed nanoIEA assay integrated with poly (l-DOPA)-coated Nafion nanopatterns and interdigitated electrode arrays can make not only biomimetic aligned ECs, but also enable real-time measurement of the enhanced barrier functions of aligned ECs via tighter cell-cell junctions.
Asunto(s)
Células Endoteliales , Polímeros de Fluorocarbono , Levodopa , Humanos , Impedancia Eléctrica , Levodopa/metabolismo , Levodopa/farmacología , EndotelioRESUMEN
Heart tissue possesses complex structural organization on multiple scales, from macro- to nano-, but nanoscale control of cardiac function has not been extensively analyzed. Inspired by ultrastructural analysis of the native tissue, we constructed a scalable, nanotopographically controlled model of myocardium mimicking the in vivo ventricular organization. Guided by nanoscale mechanical cues provided by the underlying hydrogel, the tissue constructs displayed anisotropic action potential propagation and contractility characteristic of the native tissue. Surprisingly, cell geometry, action potential conduction velocity, and the expression of a cell-cell coupling protein were exquisitely sensitive to differences in the substratum nanoscale features of the surrounding extracellular matrix. We propose that controlling cell-material interactions on the nanoscale can stipulate structure and function on the tissue level and yield novel insights into in vivo tissue physiology, while providing materials for tissue repair.
Asunto(s)
Corazón/anatomía & histología , Miocardio/ultraestructura , Animales , Matriz Extracelular/ultraestructura , Humanos , Hidrogeles , Microscopía Electrónica de Rastreo/métodos , Miocitos Cardíacos/citología , Miocitos Cardíacos/fisiología , Miocitos Cardíacos/ultraestructura , Polietilenglicoles , Ratas , Ingeniería de Tejidos/métodosRESUMEN
A nanopatterned poly(3,4-ethylenedioxythiophene) (PEDOT):Nafion composite layer integrated with interdigitated electrodes was developed to improve the device dynamic range and sensitivity for cellular impedance spectroscopy. The nanopattern fidelity to provide cellular alignment was accessed at different mixing volumes of PEDOT to Nafion. The ion transfer rate and electrical conductivity of Nafion were improved as the mixing ratio of PEDOT increased and it provided a uniform electrical path, thus giving conformable characteristics at all spectral frequencies from 1 kHz to 100 kHz for cellular impedance spectroscopy. Computational modeling was provided to extrapolate the electrical current flow and density in the composite with respect to the different frequency ranges. These results highlight that an electrically modified Nafion nanopattern interface, combined with interdigitated electrodes, can be used for various types of impedance-based cellular biosensors in a more biomimetic and sensitive manner.
Asunto(s)
Técnicas Biosensibles , Compuestos Bicíclicos Heterocíclicos con Puentes , Compuestos Bicíclicos Heterocíclicos con Puentes/química , Impedancia Eléctrica , Polímeros de Fluorocarbono , PolímerosRESUMEN
The neuromuscular junction (NMJ), which is a synapse for signal transmission from motor neurons to muscle cells, has emerged as an important region because of its association with several peripheral neuropathies. In particular, mutations in GARS that affect the formation of NMJ result in Charcot-Marie-Tooth disease and distal hereditary motor neuropathy. These disorders are mainly considered to be caused by neuronal axon abnormalities; however, no treatment is currently available. Therefore, in order to determine whether the NMJ could be targeted to treat neurodegenerative disorders, we investigated the NMJ recovery effect of HDAC6 inhibitors, which have been used in the treatment of several peripheral neuropathies. In the present study, we demonstrated that HDAC6 inhibition was sufficient to enhance movement by restoring NMJ impairments observed in a zebrafish disease model. We found that CKD-504, a novel HDAC6 inhibitor, was effective in repairing NMJ defects, suggesting that treatment of neurodegenerative diseases via NMJ targeting is possible.
Asunto(s)
Histona Desacetilasa 6 , Enfermedades de la Unión Neuromuscular , Animales , Enfermedad de Charcot-Marie-Tooth/tratamiento farmacológico , Enfermedad de Charcot-Marie-Tooth/genética , Modelos Animales de Enfermedad , Histona Desacetilasa 6/antagonistas & inhibidores , Pez Cebra , Proteínas de Pez CebraRESUMEN
Poly(dimethylsiloxane) (PDMS) is a commonly used polymer in organ-on-a-chip devices and microphysiological systems. However, due to its hydrophobicity and permeability, it absorbs drug compounds, preventing accurate drug screening applications. Here, we developed an effective and facile method to prevent the absorption of drugs by utilizing a PDMS-PEG block copolymer additive and drug pretreatment. First, we incorporated a PDMS-PEG block copolymer into PDMS to address its inherent hydrophobicity. Next, we addressed the permeability of PDMS by eliminating the concentration gradient via pretreatment of the PDMS with the drug prior to experimentally testing drug absorption. The combined use of a PDMS-PEG block copolymer with drug pretreatment resulted in a mean reduction of drug absorption by 91.6% in the optimal condition. Finally, we demonstrated that the proposed method can be applied to prevent drug absorption in a PDMS-based cardiac microphysiological system, enabling more accurate drug studies.
Asunto(s)
Dimetilpolisiloxanos , Polímeros , Evaluación Preclínica de Medicamentos , Interacciones Hidrofóbicas e Hidrofílicas , PermeabilidadRESUMEN
Charcot-Marie-Tooth disease type 2D (CMT2D), is a hereditary peripheral neuropathy caused by mutations in the gene encoding glycyl-tRNA synthetase (GARS1). Here, human induced pluripotent stem cell (hiPSC)-based models of CMT2D bearing mutations in GARS1 and their use for the identification of predictive biomarkers amenable to therapeutic efficacy screening is described. Cultures containing spinal cord motor neurons generated from this line exhibit network activity marked by significant deficiencies in spontaneous action potential firing and burst fire behavior. This result matches clinical data collected from a patient bearing a GARS1P724H mutation and is coupled with significant decreases in acetylated α-tubulin levels and mitochondrial movement within axons. Treatment with histone deacetylase 6 inhibitors, tubastatin A and CKD504, improves mitochondrial movement and α-tubulin acetylation in these cells. Furthermore, CKD504 treatment enhances population-level electrophysiological activity, highlighting its potential as an effective treatment for CMT2D.
Asunto(s)
Enfermedad de Charcot-Marie-Tooth , Glicina-ARNt Ligasa , Células Madre Pluripotentes Inducidas , Transporte Axonal , Enfermedad de Charcot-Marie-Tooth/tratamiento farmacológico , Glicina-ARNt Ligasa/genética , Histona Desacetilasa 6/genética , Inhibidores de Histona Desacetilasas/farmacología , Humanos , Células Madre Pluripotentes Inducidas/metabolismo , Tubulina (Proteína)/genéticaRESUMEN
Research in low Earth orbit (LEO) has become more accessible. The 2020 Biomanufacturing in Space Symposium reviewed space-based regenerative medicine research and discussed leveraging LEO to advance biomanufacturing for regenerative medicine applications. The symposium identified areas where financial investments could stimulate advancements overcoming technical barriers. Opportunities in disease modeling, stem-cell-derived products, and biofabrication were highlighted. The symposium will initiate a roadmap to a sustainable market for regenerative medicine biomanufacturing in space. This perspective summarizes the 2020 Biomanufacturing in Space Symposium, highlights key biomanufacturing opportunities in LEO, and lays the framework for a roadmap to regenerative medicine biomanufacturing in space.
Asunto(s)
Materiales Biocompatibles , Medio Ambiente Extraterrestre , Materiales Manufacturados , Medicina Regenerativa , Inteligencia Artificial , Automatización , Bioingeniería , Humanos , Aprendizaje Automático , InvestigaciónRESUMEN
Most microfluidic devices developed to date for the analysis of live cells incorporate channels with relatively simple constant rectangular or semi-circular cross-sections, relying on complex channel network geometries rather than alteration of the shapes of the channels themselves for development of diverse functional fluidic controls, e.g., spatial gradients of bioactive ligands. In this study we describe a simple alternative method to create highly defined and predictable gradients of surface bound molecules. This method relies on the generation of a considerable variation in the spatial distribution of flow velocities within a channel with a triangular cross-section. The triangular shape can be easily implemented by using bulk wet etching and polydimethylsiloxane (PDMS) replica molding techniques. By analytical modeling and simulation, we predict that the deposition of the solute onto a channel boundary depends on the local flow rate values, yielding gradient spanning the whole width of the channel. This prediction was validated by direct visualization of the flow rate and fibronectin-rhodamine deposition in a fabricated microchannel. Using this experimental platform, we assessed cell migration in response to a fibronectin gradient deposited in the microchannels. We find that this gradient could induce robust haptotaxis of Chinese Hamster Ovary (CHO) cells towards the areas of higher fibronectin surface density. We propose that the described simple gradient generation method can help to avoid complexity present in many current device designs, allowing to introduce more easily other potentially useful design features.
Asunto(s)
Movimiento Celular/fisiología , Técnicas Analíticas Microfluídicas/instrumentación , Técnicas Analíticas Microfluídicas/métodos , Modelos Biológicos , Animales , Células CHO , Moléculas de Adhesión Celular/química , Cricetinae , Cricetulus , Dimetilpolisiloxanos , Fibronectinas/química , Microscopía Fluorescente , Microscopía por Video , Nylons , Rodaminas/químicaRESUMEN
We have examined the effects of surface nanotopography on in vitro osteogenesis of human mesenchymal stem cells (hMSCs). UV-assisted capillary force lithography was employed to fabricate a scalable (4x5 cm), well-defined nanostructured substrate of a UV curable polyurethane polymer with dots (150, 400, 600 nm diameter) and lines (150, 400, 600 nm width). The influence of osteogenic differentiation of hMSCs was characterized at day 8 by alkaline phosphatase (ALP) assay, RT-PCR, and real-time PCR analysis. We found that hMSCs cultured on the nanostructured surfaces in osteogenic induction media showed significantly higher ALP activity compared to unpatterned PUA surface (control group). In particular, the hMSCs on the 400 nm dot pattern showed the highest level of ALP activity. Further investigation with real-time quantitative RT-PCR analysis demonstrated significantly higher expression of core binding factor 1 (Cbfa1), osteopontin (OP), and osteocalcin (OC) levels in hMSCs cultured on the 400 nm dot pattern in osteogenic induction media. These findings suggest that surface nanotopography can enhance osteogenic differentiation synergistically with biochemical induction substance.
Asunto(s)
Diferenciación Celular/efectos de los fármacos , Células Madre Mesenquimatosas/citología , Nanoestructuras/química , Osteogénesis/efectos de los fármacos , Poliuretanos/farmacología , Técnicas de Cultivo de Célula , Factores de Unión al Sitio Principal/biosíntesis , Humanos , Células Madre Mesenquimatosas/efectos de los fármacos , Osteocalcina/biosíntesis , Osteopontina/biosíntesis , Propiedades de SuperficieRESUMEN
Bioengineering approaches to regulate stem cell fates aim to recapitulate the in vivo microenvironment. In recent years, manipulating the micro- and nano-scale topography of the stem cell niche has gained considerable interest for the purposes of controlling extrinsic mechanical cues to regulate stem cell fate and behavior in vitro. Here, we established an optimal nanotopographical system to improve 3-dimensional (3D) differentiation of pancreatic cells from human pluripotent stem cells (hPSCs) by testing gradient-pattern chips of nano-scale polystyrene surface structures with varying sizes and shapes. The optimal conditions for 3D differentiation of pancreatic cells were identified by assessing the expression of developmental regulators that are required for pancreatic islet development and maturation. Our results showed that the gradient chip of pore-part 2 (Po-2, 200-300â¯nm diameter) pattern was the most efficient setting to generate clusters of pancreatic endocrine progenitors (PDX1+ and NGN3+) compared to those of other pore diameters (Po-1, 100-200 or Po-3, 300-400â¯nm) tested across a range of pillar patterns and flat surfaces. Furthermore, the Po-2 gradient pattern-derived clusters generated islet-like 3D spheroids and tested positive for the zinc-chelating dye dithizone. The spheroids consisted of more than 30% CD200â¯+â¯endocrine cells and also expressed NKX6.1 and NKX2.2. In addition, pancreatic ß- cells expressing insulin and polyhormonal cells expressing both insulin and glucagon were obtained at the final stage of pancreatic differentiation. In conclusion, our data suggest that an optimal topographical structure for differentiation to specific cell types from hPSCs can be tested efficiently by using gradient-pattern chips designed with varying sizes and surfaces. STATEMENT OF SIGNIFICANCE: Our study provides demonstrates of using gradient nanopatterned chips for differentiation of pancreatic islet-like clusters. Gradient nanopatterned chips are consisted of two different shapes (nanopillar and nanopore) in three different ranges of nano sizes (100-200, 200-300, 300-400â¯nm). We found that optimal nanostructures for differentiation of pancreatic islet-like clusters were 200-300â¯nm nano pores. Cell transplantation is one of the major therapeutic option for type 1 diabetes mellitus (DM) using stem cell-derived ß-like cells. We generated 50 um pancreatic islet-like clusters in size, which would be an optimal size for cell transplantation. Futuremore, the small clusters provide a powerful source for cell therapy. Our findings suggest gradient nanopatterned chip provides a powerful tool to generate specific functional cell types of a high purity for potential uses in cell therapy development.
Asunto(s)
Islotes Pancreáticos/citología , Nanopartículas/química , Células Madre Pluripotentes/citología , Agregación Celular , Diferenciación Celular , Endodermo/citología , Proteína Homeobox Nkx-2.2 , Proteínas de Homeodominio , Células Madre Embrionarias Humanas/citología , Humanos , Proteínas Nucleares , Poliestirenos/química , Esferoides Celulares/citología , Factores de TranscripciónRESUMEN
We report on the development of bioinspired cardiac scaffolds made from electroconductive acid-modified silk fibroin-poly(pyrrole) (AMSF+PPy) substrates patterned with nanoscale ridges and grooves reminiscent of native myocardial extracellular matrix (ECM) topography to enhance the structural and functional properties of cultured human pluripotent stem cells (hPSC)-derived cardiomyocytes. Nanopattern fidelity was maintained throughout the fabrication and functionalization processes, and no loss in conductive behavior occurred due to the presence of the nanotopographical features. AMSF+PPy substrates were biocompatible and stable, maintaining high cell viability over a 21-day culture period while displaying no signs of PPy delamination. The presence of anisotropic topographical cues led to increased cellular organization and sarcomere development, and electroconductive cues promoted a significant improvement in the expression and polarization of connexin 43 (Cx43), a critical regulator of cell-cell electrical coupling. The combination of biomimetic topography and electroconductivity also increased the expression of genes that encode key proteins involved in regulating the contractile and electrophysiological function of mature human cardiac tissue.
Asunto(s)
Matriz Extracelular/química , Fibroínas/química , Miocitos Cardíacos/citología , Polímeros/química , Pirroles/química , Andamios del Tejido/química , Animales , Materiales Biomiméticos/química , Bombyx/química , Conexina 43/metabolismo , Conductividad Eléctrica , Técnicas Electroquímicas/métodos , Células Madre Embrionarias/metabolismo , Uniones Comunicantes/metabolismo , Humanos , Miocardio/química , Miocitos Cardíacos/metabolismo , Propiedades de Superficie , Ingeniería de Tejidos/instrumentación , Ingeniería de Tejidos/métodosRESUMEN
A lack of electrical conductivity and structural organization in currently available biomaterial scaffolds limits their utility for generating physiologically representative models of functional cardiac tissue. Here we report on the development of scalable, graphene-functionalized topographies with anisotropic electrical conductivity for engineering the structural and functional phenotypes of macroscopic cardiac tissue constructs. Guided by anisotropic electroconductive and topographic cues, the tissue constructs displayed structural property enhancement in myofibrils and sarcomeres, and exhibited significant increases in the expression of cell-cell coupling and calcium handling proteins, as well as in action potential duration and peak calcium release.
Asunto(s)
Grafito/química , Miocitos Cardíacos/química , Nanoestructuras/química , Polietilenglicoles/química , Ingeniería de Tejidos , Andamios del Tejido/química , Anisotropía , Materiales Biocompatibles/química , Calcio/química , Calcio/metabolismo , Proliferación Celular , Conductividad Eléctrica , Humanos , Miocitos Cardíacos/citología , Miocitos Cardíacos/metabolismo , FenotipoRESUMEN
Despite possessing substantial regenerative capacity, skeletal muscle can suffer from loss of function due to catastrophic traumatic injury or degenerative disease. In such cases, engineered tissue grafts hold the potential to restore function and improve patient quality of life. Requirements for successful integration of engineered tissue grafts with the host musculature include cell alignment that mimics host tissue architecture and directional functionality, as well as vascularization to ensure tissue survival. Here, we have developed biomimetic nanopatterned poly(lactic-co-glycolic acid) substrates conjugated with sphingosine-1-phosphate (S1P), a potent angiogenic and myogenic factor, to enhance myoblast and endothelial maturation. Primary muscle cells cultured on these functionalized S1P nanopatterned substrates developed a highly aligned and elongated morphology and exhibited higher expression levels of myosin heavy chain, in addition to genes characteristic of mature skeletal muscle. We also found that S1P enhanced angiogenic potential in these cultures, as evidenced by elevated expression of endothelial-related genes. Computational analyses of live-cell videos showed a significantly improved functionality of tissues cultured on S1P-functionalized nanopatterns as indicated by greater myotube contraction displacements and velocities. In summary, our study demonstrates that biomimetic nanotopography and S1P can be combined to synergistically regulate the maturation and vascularization of engineered skeletal muscles.
Asunto(s)
Lisofosfolípidos/metabolismo , Músculo Esquelético/irrigación sanguínea , Músculo Esquelético/metabolismo , Nanopartículas/química , Nanotecnología , Neovascularización Patológica/metabolismo , Transducción de Señal , Esfingosina/análogos & derivados , Animales , Materiales Biomiméticos/química , Materiales Biomiméticos/metabolismo , Diferenciación Celular , Células Cultivadas , Relación Dosis-Respuesta a Droga , Células Endoteliales/citología , Lisofosfolípidos/química , Ratones , Ratones Noqueados , Ratones Transgénicos , Nanopartículas/metabolismo , Copolímero de Ácido Poliláctico-Ácido Poliglicólico/química , Copolímero de Ácido Poliláctico-Ácido Poliglicólico/metabolismo , Esfingosina/química , Esfingosina/metabolismoRESUMEN
Electrically conductive materials provide a suitable platform for the in vitro study of excitable cells, such as skeletal muscle cells, due to their inherent conductivity and electroactivity. Here it is demonstrated that bioinspired electroconductive nanopatterned substrates enhance myogenic differentiation and maturation. The topographical cues from the highly aligned collagen bundles that form the extracellular matrix of skeletal muscle tissue are mimicked using nanopatterns created with capillary force lithography. Electron beam deposition is then utilized to conformally coat nanopatterned substrates with a thin layer of either gold or titanium to create electroconductive substrates with well-defined, large-area nanotopographical features. C2C12 cells, a myoblast cell line, are cultured for 7 d on substrates and the effects of topography and electrical conductivity on cellular morphology and myogenic differentiation are assessed. It is found that biomimetic nanotopography enhances the formation of aligned myotubes and the addition of an electroconductive coating promotes myogenic differentiation and maturation, as indicated by the upregulation of myogenic regulatory factors Myf5, MyoD, and myogenin (MyoG). These results suggest the suitability of electroconductive nanopatterned substrates as a biomimetic platform for the in vitro engineering of skeletal muscle tissue.
Asunto(s)
Diferenciación Celular , Conductividad Eléctrica , Desarrollo de Músculos , Nanopartículas/química , Acrilatos/farmacología , Animales , Adhesión Celular/efectos de los fármacos , Diferenciación Celular/efectos de los fármacos , Línea Celular , Proliferación Celular/efectos de los fármacos , Ratones , Microscopía Fluorescente , Desarrollo de Músculos/efectos de los fármacos , Nanopartículas/ultraestructura , Poliuretanos/farmacología , Reacción en Cadena en Tiempo Real de la PolimerasaRESUMEN
Coordinated extracellular matrix spatiotemporal reorganization helps regulate cellular differentiation, maturation, and function in vivo, and is therefore vital for the correct formation, maintenance, and healing of complex anatomic structures. In order to evaluate the potential for cultured cells to respond to dynamic changes in their in vitro microenvironment, as they do in vivo, the collective behavior of primary cardiac muscle cells cultured on nanofabricated substrates with controllable anisotropic topographies was studied. A thermally induced shape memory polymer (SMP) was employed to assess the effects of a 90° transition in substrate pattern orientation on the contractile direction and structural organization of cardiomyocyte sheets. Cardiomyocyte sheets cultured on SMPs exhibited anisotropic contractions before shape transition. 48 h after heat-induced shape transition, the direction of cardiomyocyte contraction reoriented significantly and exhibited a bimodal distribution, with peaks at â¼45 and -45° (P < 0.001). Immunocytochemical analysis highlighted the significant structural changes that the cells underwent in response to the shift in underlying topography. The presented results demonstrate that initial anisotropic nanotopographic cues do not permanently determine the organizational fate or contractile properties of cardiomyocytes in culture. Given the importance of surface cues in regulating primary and stem cell development, investigation of such tunable nanotopographies may have important implications for advancing cellular maturation and performance in vitro, as well as improving our understanding of cellular development in response to dynamic biophysical cues.
Asunto(s)
Materiales Biocompatibles/química , Miocitos Cardíacos/citología , Nanoestructuras/química , Poliésteres/química , Ingeniería de Tejidos/métodos , Animales , Anisotropía , Células Cultivadas , Contracción Miocárdica , Nanoestructuras/ultraestructura , Ratas Sprague-Dawley , Temperatura , Temperatura de TransiciónRESUMEN
Endothelial physiology is regulated not only by humoral factors, but also by mechanical factors such as fluid shear stress and the underlying cellular matrix microenvironment. The purpose of the present study was to examine the effects of matrix topographical cues on the endothelial secretion of cytokines/chemokines in vitro. Human endothelial cells were cultured on nanopatterned polymeric substrates with different ratios of ridge to groove widths (1:1, 1:2, and 1:5) and with different stiffnesses (6.7 MPa and 2.5 GPa) in the presence and absence of 1.0 ng/mL TNF-α. The levels of cytokines/chemokines secreted into the conditioned media were analyzed with a multiplexed bead-based sandwich immunoassay. Of the nanopatterns tested, the 1:1 and 1:2 type patterns were found to induce the greatest degree of endothelial cell elongation and directional alignment. The 1:2 type nanopatterns lowered the secretion of inflammatory cytokines such as IL-1ß, IL-3, and MCP-1, compared to unpatterned substrates. Additionally, of the two polymers tested, it was found that the stiffer substrate resulted in significant decreases in the secretion of IL-3 and MCP-1. These results suggest that substrates with specific extracellular nanotopographical cues or stiffnesses may provide anti-atherogenic effects like those seen with laminar shear stresses by suppressing the endothelial secretion of cytokines and chemokines involved in vascular inflammation and remodeling.
Asunto(s)
Quimiocinas/metabolismo , Citocinas/metabolismo , Nanoestructuras/química , Línea Celular , Células Endoteliales/citología , Células Endoteliales/efectos de los fármacos , Células Endoteliales/metabolismo , Humanos , Microscopía Confocal , Nanoestructuras/toxicidad , Polímeros/químicaRESUMEN
We have examined the effects of surface nanotopography and hyaluronic acid (HA) on in vitro chondrogenesis of dental pulp stem cells (DPSCs). Ultraviolet-assisted capillary force lithography was employed to fabricate well-defined nanostructured scaffolds of composite PEG-GelMA-HA hydrogels that consist of poly(ethylene glycol) dimethacrylate (PEGDMA), methacrylated gelatin (GelMA), and HA. Using this microengineered platform, we first demonstrated that DPSCs formed three-dimensional spheroids, which provide an appropriate environment for in vitro chondrogenic differentiation. We also found that DPSCs cultured on nanopatterned PEG-GelMA-HA scaffolds showed a significant upregulation of the chondrogenic gene markers (Sox9, Alkaline phosphatase, Aggrecan, Procollagen type II, and Procollagen type X), while downregulating the pluripotent stem cell gene, Nanog, and epithelial-mesenchymal genes (Twist, Snail, Slug) compared with tissue culture polystyrene-cultured DPSCs. Immunocytochemistry showed more extensive deposition of collagen type II in DPSCs cultured on the nanopatterned PEG-GelMA-HA scaffolds. These findings suggest that nanotopography and HA provide important cues for promoting chondrogenic differentiation of DPSCs.
Asunto(s)
Condrogénesis/fisiología , Pulpa Dental/citología , Ácido Hialurónico/química , Metacrilatos/química , Nanoestructuras/ultraestructura , Polietilenglicoles/química , Células Madre/citología , Ingeniería de Tejidos/métodos , Animales , Animales Recién Nacidos , Materiales Biocompatibles/síntesis química , Diferenciación Celular/fisiología , Proliferación Celular/fisiología , Tamaño de la Célula , Supervivencia Celular/fisiología , Células Cultivadas , Pulpa Dental/fisiología , Hidrogeles/química , Ensayo de Materiales , Ratones , Nanoestructuras/química , Células Madre/fisiología , Propiedades de SuperficieRESUMEN
Although synthetic polymers are desirable in tissue engineering applications for the reproducibility and tunability of their properties, synthetic small diameter vascular grafts lack the capability to endothelialize in vivo. Thus, synthetically fabricated biodegradable tissue scaffolds that reproduce important aspects of the extracellular environment are required to meet the urgent need for improved vascular grafting materials. In this study, we have successfully fabricated well-defined nanopatterned cell culture substrates made of a biodegradable composite hydrogel consisting of poly(ethylene glycol) dimethacrylate (PEGDMA) and gelatin methacrylate (GelMA) by using UV-assisted capillary force lithography. The elasticity and degradation rate of the composite PEG-GelMA nanostructures were tuned by varying the ratios of PEGDMA and GelMA. Human umbilical vein endothelial cells (HUVECs) cultured on nanopatterned PEG-GelMA substrates exhibited enhanced cell attachment compared with those cultured on unpatterned PEG-GelMA substrates. Additionally, HUVECs cultured on nanopatterned PEG-GelM substrates displayed well-aligned, elongated morphology similar to that of native vascular endothelial cells and demonstrated rapid and directionally persistent migration. The ability to alter both substrate stiffness and degradation rate and culture endothelial cells with increased elongation and alignment is a promising next step in recapitulating the properties of native human vascular tissue for tissue engineering applications.