Inhibition of biofouling by modification of forward osmosis membrane using quaternary ammonium cation.

In the operation of the forward osmosis (FO) process, biofouling of the membrane is a potentially serious problem. Development of an FO membrane with antibacterial properties could contribute to a reduction in biofouling. In this study, quaternary ammonium cation (QAC), a widely used biocidal material, was conjugated with a silane coupling agent (3-(trimethoxysilyl)-propyldimethyloctadecyl ammonium chloride) and used to modify an FO membrane to confer antibacterial properties. Fourier transform infrared spectroscopy (FT-IR) demonstrated that the conjugated QAC was successfully immobilized on the FO membrane via covalent bonding. Bacterial viability on the QAC-modified membrane was confirmed via colony count method and visualized via bacterial viability assay. The QAC membrane decreased the viability of Escherichia coli to 62% and Staphylococcus aureus to 77% versus the control membrane. Inhibition of biofilm formation on the QAC modified membrane was confirmed via anti-biofilm tests using the drip-flow reactor and FO unit, resulting in 64% and 68% inhibition in the QAC-modified membrane against the control membrane, respectively. The results demonstrate the effectiveness of the modified membrane in reducing bacterial viability and inhibiting biofilm formation, indicating the potential of QAC-modified membranes to decrease operation costs incurred by biofouling.

Repercussion of extracellular polymeric removal by low-temperature calcium peroxide pretreatment on bacterial fragmentation for enhancing biohydrogen production.

This study envisioned attaining the percipience of effective biohydrogen production from paper mill waste-activated sludge through low-temperature calcium peroxide-mediated bacterial pretreatment (TCP-BP). Floc dissociation with limited cell destruction was attained at a calcium peroxide dosage of 0.05 g/g suspended solids (SS) at 70 °C temperature. This TCP-BP method improves bacterial fragmentation, and very high SS solubilization was achieved at 42 h, with the solubilization and solid reduction of 18.6% and 14.1%, respectively. BP-only pretreatment shows lower solubilization efficiency of 9.4% than TCP-BP pretreatment due to the presence of flocs, which inhibit the enzymatic action during bacterial fragmentation. A biohydrogen test shows a high biohydrogen potential of 94.1 mL H2/gCOD for the TCP-BP sample, which is higher than that of the BP-only and control samples. According to the findings, low-temperature calcium peroxide-mediated bacterial fragmentation is validated to be an efficient process for sludge degradation and biohydrogen production.

Preparation of single-walled carbon nanotubes/polyvinylchloride membrane and its antibacterial property.

Polyvinylchloride (PVC) ultrafiltration membranes were modified by blending with single-walled carbon nanotubes (SWCNTs) to improve the membranes' antibacterial property. Both modified and control samples were characterized for pore structure, roughness, hydrophilicity, permeability and mechanical properties. The membranes' antibacterial property was accessed with Escherichia coli as the model microbes by several methods. It was found that, after being blended with SWCNTs, the surface roughness of the modified membrane increased. Also, the surface hydrophilicity was improved. The membrane flux increased accordingly. But the membrane elongation decreased obviously with the SWCNTs addition. The modified membranes did not show the antibacterial property as expected in this research. There was no bacterial inhibition circle around the SWCNTs/PVC membrane coupons in the culture plates. There were no morphological differences of the cells on the control and the modified membranes. Hoechst 33342/propidium iodide stain test showed that there were more than 90% living bacterial cells which could grow on the SWCNTs/PVC membranes. This study suggests that the polymer wrapping may reduce the SWCNTs' antibacterial property greatly.

Raffinose Inhibits Streptococcus mutans Biofilm Formation by Targeting Glucosyltransferase.

Streptococcus mutans is a representative biofilm-forming bacterium that causes dental caries through glucosyltransferase (GTF) activity. Glucans are synthesized from sucrose by GTFs and provide binding sites for S. mutans to adhere tightly to the tooth enamel. Therefore, if a novel compound that interferes with GTF function is developed, biofilm formation control in S. mutans would be possible. We discovered that raffinose, an oligosaccharide from natural products, strongly inhibited biofilm formation, GTF-related gene expression, and glucan production. Furthermore, biofilm inhibition on saliva-coated hydroxyapatite discs through the reduction of bacterial adhesion indicated the applicability of raffinose in oral health. These effects of raffinose appear to be due to its ability to modulate GTF activity in S. mutans. Hence, raffinose may be considered an antibiofilm agent for use as a substance for oral supplies and dental materials to prevent dental caries. IMPORTANCE Dental caries is the most prevalent infectious disease and is expensive to manage. Dental biofilms can be eliminated via mechanical treatment or inhibited using antibiotics. However, bacteria that are not entirely removed or are resistant to antibiotics can still form biofilms. In this study, we found that raffinose inhibited biofilm formation by S. mutans, a causative agent of dental caries, possibly through binding to GtfC. Our findings support the notion that biofilm inhibition by raffinose can be exerted by interference with GTF function, compensating for the shortcomings of existing commercialized antibiofilm methods. Furthermore, raffinose is an ingredient derived from natural products and can be safely utilized in humans; it has no smell and tastes sweet. Therefore, raffinose, which can control S. mutans biofilm formation, has been suggested as a substance for oral supplies and dental materials to prevent dental caries.

Investigation of critical sludge characteristics for membrane fouling in a submerged membrane bioreactor: Role of soluble microbial products and extracted extracellular polymeric substances.

Membrane bioreactors (MBRs) are considered a promising tool for resource recovery in wastewater treatment. Nevertheless, membrane fouling is an inevitable phenomenon that deteriorates the MBR performance. Although many studies have attempted to elucidate the effect of sludge characteristics on MBR fouling, they posed certain limitations. Most of the previous studies focused on the initial sludge or employ the results of short-term batch tests without long-term transmembrane pressure (TMP) profiles in the interpretation of fouling behaviors. This study was conducted considering these limitations to determine the sludge characteristics most closely related to long-term TMP profiles and to identify their role in fouling behaviors. In long-term TMP profiles, critical time (tc; time to TMP jump) and fouling rates (the increase in the TMP slope) were used as fouling indexes, which were used to correlate with average values of sludge characteristics before and after experiments. According to the results, the concentration of the total soluble microbial product (SMP) and extracted extracellular polymeric substance (eEPS) in sludge significantly increased by 1.9 times and up to 28 times after experiment. The increase in the SMP and eEPS caused early TMP jumps and resulted in low-fouling rates by increasing particle size. Owing to the increase in the SMP and eEPS concentration, the origin of fouling potential was shifted from suspended solids to colloids and soluble materials. Fouling resistance caused by soluble material increased by up to 11.38 times.

Development of a new method to evaluate critical flux and system reliability based on particle properties in a membrane bioreactor.

Membrane fouling occurs when the operating flux exceeds a certain point (i.e., critical flux). Critical flux has therefore been widely adopted to determine the initial operating flux in membrane bioreactor (MBR) processes. The flux steeping method currently used to measure the critical flux is time-consuming and uneconomical. This study was conducted to develop a novel approach for the evaluation of critical flux. Given that particle fouling is dominant during the initial fouling stage, we hypothesized that particle properties may be closely related to critical flux. A critical flux prediction model with an R2 of 0.9 was therefore derived, which indicates that particle properties regulate critical flux. The results imply that most of the fouling potential during the early stages of operation is caused by SS, and that the formation of cakes that comprise large particles is the dominant fouling mechanism. The new method proposed in this study reduced the measurement cost and time to evaluate critical flux by 3.5-and 8 times, respectively, compared to the flux-stepping method. In terms of practical application, the applicability of the model equation was identified by system reliability analysis, which indicates that the system failure increases significantly as the standard deviation of the variables increases. This study demonstrated that the prediction of critical flux and system reliability can be achieved through particle characteristic measurement. A similar approach is expected to be employed in real MBR plants as an economical and convenient fouling control strategy to solve problems involving resource shortages.

Synergistic control of membrane biofouling using linoleic acid and sodium hypochlorite.

Biofouling is a major operational problem in the reverse osmosis (RO) process, affecting the membrane performance. Although sodium hypochlorite (NaOCl) is used to chemically clean the biofouled membranes, high concentrations of NaOCl cause morphological and chemical damage to the RO membrane. The objective of this study is to enhance chemical cleaning efficiency by combining with a dispersion agent (linoleic acid, LA) that does not harm the RO membrane, to overcome the disadvantages of NaOCl. Biofilm cells were initially dispersed with LA treatment and biofouled layers were subsequently cleaned using NaOCl at low concentration. The optimized combination resulted in 3.9-4.4 times higher flux recovery efficiency than that with individual treatments. Furthermore, the combination decreased the volume and thickness of the biofilm as well as the amount of extracellular polymeric substances. Taken together, the combined treatment of LA and NaOCl significantly improves RO biofouling control.

Effect of broad-spectrum biofilm inhibitor raffinose, a plant galactoside, on the inhibition of co-culture biofilm on the microfiltration membrane.

A membrane bioreactor (MBR) integrates process such as membrane filtration and biological treatment of activated sludge. However, organic, inorganic and biological matters cause membrane fouling, which seriously affects membrane performance. The goal of this study was to evaluate the biofouling inhibition capacity of raffinose during the MBR process. The results showed that 0-1,000 µM raffinose significantly reduced the formation of the P. aeruginosa and S. aureus co-culture biofilm by about 25-52 % in a concentration-dependent manner. In addition, the effect of raffinose on the microfiltration membrane biofilm was tested in a flow reactor and lab-scale MBR unit. The results showed that the co-culture biofilm and transmembrane pressure were decreased by raffinose treatment compared to those by furanone C-30 treatment. These results clearly demonstrated that raffinose, broad-spectrum biofilm inhibitor, inhibits biofilm formation in mixed cultures and could be used to mitigate biofouling in MBR processes.