Clinical outcomes of two-stage revision arthroplasty using a spiked tibial cement spacer in infected total knee arthroplasty.

PURPOSE: A tibial cement spacer (TCS) with spikes offers better initial stability than a conventional TCS and reduces spacer-related problems in two-stage revision total knee arthroplasty (R-TKA) for infection. We compared the clinical outcomes of two-stage revision arthroplasty for infected TKA using spiked TCS with that of conventional TCS. METHODS: This retrospective cohort study included 29 patients who underwent two-stage revision arthroplasty using an articulating cement spacer and who could be followed up for at least one year. Group S comprised 14 patients using spiked TCS, whereas Group C comprised 15 patients using conventional TCS. Demographic data, the interval from first to second stage revision, motion arc, numerical rating scale (NRS), Knee Society (KS) score, serum levels of erythrocyte sedimentation rate (ESR) and C-reactive protein (CRP), and frequency of repeating the first-stage and infection recurrence after R-TKA between the groups were analyzed. RESULTS: No significant differences were observed in the female ratio and mean age between both groups. The mean interval between the first and second stage revision was significantly shorter in Group S than in Group C. The mean motion arc was significantly larger in Group S than in Group C. The mean NRS was significantly lower in Group S than in Group C. The mean KS score in Group S was significantly higher than that in Group C. Serum ESR and CRP levels did not differ between the groups. The frequency of repeating the first stage was lower in Group S than in Group C. However, the recurrence rate after R-TKA was higher in Group S than in Group C. CONCLUSION: Compared with conventional TCS, spiked TCS shortened the period until R-TKA and improved pain and function levels. However, no significant difference existed in the rate of infection recurrence after R-TKA.

Sclerostin in periodontal ligament: Homeostatic regulator in biophysical force-induced tooth movement.

AIM: To study the role of sclerostin in periodontal ligament (PDL) as a homeostatic regulator in biophysical-force-induced tooth movement (BFTM). MATERIALS AND METHODS: BFTM was performed in rats, followed by microarray, immunofluorescence, in situ hybridization, and real-time polymerase chain reaction for the detection and identification of the molecules. The periodontal space was analysed via micro-computed tomography. Effects on osteoclastogenesis and bone resorption were evaluated in the bone-marrow-derived cells in mice. In vitro human PDL cells were subjected to biophysical forces. RESULTS: In the absence of BFTM, sclerostin was hardly detected in the periodontium except in the PDL and alveolar bone in the furcation region and apex of the molar roots. However, sclerostin was up-regulated in the PDL in vivo by adaptable force, which induced typical transfiguration without changes in periodontal space as well as in vitro PDL cells under compression and tension. In contrast, the sclerostin level was unaffected by heavy force, which caused severe degeneration of the PDL and narrowed periodontal space. Sclerostin inhibited osteoclastogenesis and bone resorption, which corroborates the accelerated tooth movement by the heavy force. CONCLUSIONS: Sclerostin in PDL may be a key homeostatic molecule in the periodontium and a biological target for the therapeutic modulation of BFTM.

SLPI in periodontal Ligament is not sleepy during biophysical force-induced tooth movement.

AIM: We aimed to identify a key molecule that maintains periodontal tissue homeostasis during biophysical force-induced tooth movement (BTM) by orchestrating alveolar bone (AB) remodelling. MATERIALS AND METHODS: Differential display-PCR was performed to identify key molecules for BTM in rats. To investigate the localization and expression of the identified molecules, immunofluorescence, real-time RT-PCR and Western blotting were performed in rats and human periodontal ligament (PDL) cells. Functional test and micro-CT analysis were performed to examine the in vivo effects of the identified molecules on BTM. RESULTS: Secretory leucocyte peptidase inhibitor (SLPI) in the PDL was revealed as a key molecule for BTM-induced AB remodelling. SLPI was enhanced in the PDL under both compression and tension, and downregulated by an adenyl cyclases inhibitor. SLPI induced osteoblastogenic genes including runt-related transcription factor 2 (Runx2) and synergistically augmented tension-induced Runx2 expression. SLPI augmented mineralization in PDL cells. SLPI induced osteoclastogenic genes including receptor activator of nuclear factor kappa-Β ligand (RANKL) and synergistically augmented the compression-induced RANKL and macrophage colony-stimulating factor (MCSF) expression. Finally, the in vivo SLPI application into the AB significantly augmented BTM. CONCLUSIONS: SLPI or its inhibitors might serve as a biological target molecule for therapeutic interventions to modulate BTM.

MACULAR HOLE ASSOCIATED WITH AGE-RELATED MACULAR DEGENERATION: Pathogenesis and Surgical Outcomes.

PURPOSE: To ascertain the pathogenesis of macular hole (MH) associated with age-related macular degeneration (AMD) and its surgical outcomes. METHODS: Patients with full-thickness MH associated with AMD (higher grades than intermediate) were enrolled. The mechanism of MH formation and closure rate after vitrectomy (surgical outcome) were determined using optical coherence tomography imaging. RESULTS: The mechanism of MH formation (35 eyes) associated with AMD was classified into four types: vitreomacular traction (42.9%), gradual retinal thinning caused by subretinal drusen or pigment epithelial detachment (22.9%), massive subretinal hemorrhage (20.0%), and combined (14.3%). In the 41 eyes that underwent vitrectomy, the logarithm of the minimum angle of resolution best-corrected visual acuity improved from 0.82 (0.10-2.30) preoperative to 0.69 (0.10-2.30) postoperative (P = 0.001). Successful closure of the MH was achieved in 33 eyes (80.5%) after vitrectomy. No significant association was observed between the closure rate of MH after vitrectomy and mechanism of MH formation (P = 0.083). CONCLUSION: The mechanism of MH formation associated with AMD was classified into four types and was not related to its surgical outcome. Considering visual improvement and surgical outcome after vitrectomy in our study, active surgical treatment can be considered for MH associated with AMD.

Autophagy induction plays a protective role against hypoxic stress in human dental pulp cells.

Human dental pulp exposed to hypoxic conditions induces cell death accompanied by autophagy. However, the role of hypoxia-induced autophagy in human dental pulp cells (HDPCs) is unclear. The present study aimed to investigate the role of autophagy in hypoxia-induced apoptosis of HDPCs. Cobalt chloride (CoCl2 ) treated HDPCs, to mimic hypoxic conditions, decreased cell viability. Also, apoptosis-related signal molecules, cleaved caspase-3 and PARP levels, were enhanced in CoCl2 -treated HDPCs. HDPCs exposed to CoCl2 also promoted autophagy, showing upregulated p62 and microtubule-associated protein 1 light chain 3 (LC3)-II levels, typical autophagic markers, and increased acidic autophagolysosomal vacuoles. Autophagy inhibition by 3 methyladenine (3MA) or RNA interference of LC3B resulted in increased levels of cleaved PARP and caspase-3, and the release of cytochrome c from mitochondria into cytosol in the CoCl2 -treated HDPCs. However, autophagy activation by rapamycin enhanced the p62 and LC3-II levels, whereas it reduced PARP and caspase-3 cleavage induced by CoCl2. These results revealed that CoCl2 -activated autophagy showed survival effects against CoCl2 -induced apoptosis in the HDPCs. CoCl2 upregulated HIF-1α and decreased the phosphorylation of mTOR/p70S6K. HIF-1α inhibitor, YC-1 decreased p62 and LC3-II levels, whereas it augmented PARP and caspase-3 cleavage in response to CoCl2 . Also, YC-1 enhanced the phosphorylation of mTOR and p70S6K suppressed by CoCl2 , demonstrating that CoCl2 -induced autophagy via mTOR/p70S6K is mediated by HIF-1α. Taken together, these finding suggest that CoCl2 -induced autophagy mediated by the mTOR/p70S6K pathway plays a protective role against hypoxic stress in HDPCs.

Expression of amelogenin and effects of cyclosporin A in developing hair follicles in rats.

Amelogenin, an enamel matrix protein has been considered to be exclusively expressed by ameloblasts during odontogenesis. However, burgeoning evidence indicates that amelogenin is also expressed in non-mineralizing tissues. Under the hypothesis that amelogenin may be a functional molecule in developing hair follicles which share developmental features with odontogenesis, this study for the first time elucidated the presence and functional changes of amelogenin and its receptors during rat hair follicle development. Amelogenin was specifically localized in the outer epithelial root sheath of hair follicles. Its expression appeared in the deeper portion of hair follicles, i.e. the bulbar and suprabulbar regions rather than the superficial region. Lamp-1, an amelogenin receptor, was localized in either follicular cells or outer epithelial sheath cells, reflecting functional changes during development. The expression of amelogenin splicing variants increased in a time-dependent manner during postnatal development of hair follicles. Amelogenin expression was increased by treatment with cyclosporin A, which is an inducer of anagen in the hair follicle, whereas the level of Lamp-1 and -2 was decreased by cyclosporin A treatment. These results suggest that amelogenin may be a functional molecule involved in the development of the hair follicle rather than an inert hair shaft matrix protein.

Regulatory role of N-myc downregulated genes in amelogenesis in rats.

Cytodifferentiation of odontogenic cells, a late stage event in odontogenesis is based on gene regulation. However, studies on the identification of the involved genes are scarce. The present study aimed to search for molecules for the cytodifferentiation of ameloblastic cells in rats. Differential display-PCR revealed a differentially expressed gene between cap/early bell stage and hard tissue formation stage in molars. This gene was identified as N-myc Downregulated Gene 1 (Ndrg1), which is the first report in tooth development. Real time PCR and western blotting confirmed that the mRNA level of Ndrg1 was higher during enamel formation than the cap stage. Ndrg1 expression was upregulated in the early bell, crown, and root stages in a time-dependent manner. These patterns of expression were similar in Ndrg2, but Ndrg3 and Ndrg4 levels did not change during the developmental stages. Immunofluorescence revealed that strong immunoreactivity against Ndrg1 were detected in differentiated ameloblasts only, not inner enamel epithelium, odontoblasts and ameloblastic cells in defected enamel regions. Alkaline phosphatase and alizarin red s stains along with real time PCR, revealed that Ndrg1 and Ndrg2 were involved in cytodifferentiation and enamel matrix mineralization by selectively regulating amelogenin and ameloblastin genes in SF2 ameloblastic cells. These results suggest that Ndrg may play a crucial functional role in the cytodifferentiation of ameloblasts for amelogenesis.

Spatiotemporal regulation of dental pulpal innervation in the rat.

The dental pulp is a highly innervated tissue transmitting pain-related sensations in the tooth. Consequently, understanding the intricacies of its innervation mechanism in odontogenesis is crucial for gaining insights into dental pain and developing dental pain-modulating agents. This study examined neuroregulatory molecules such as neurotrophic factors (nerve growth factor [NGF], brain-derived neurotrophic factor [BDNF], neurotrophin-4 [NTF-4], and neurturin [NRTN]) and neuroinhibitory factors (slit2, ephrin isoforms and netrin-1) in developing rat teeth with follicles. NGF, BDNF and NRTN transcriptions showed time-dependent upregulation, particularly during the root formation stage. In contrast, NTF-4 mRNA was highly expressed at the cap stage, but became downregulated over time. Slit2 and ephrin-B2 expression was distinct at the cap stage and then downregulated in a time-dependent manner. Ephrin-A5 and netrin-1 expression did not significantly change. Immunofluorescence analysis revealed a robust expression of both ephrin-B2 and slit2 in the outer and inner dental epithelia of the enamel organ, a non-neurogenic tissue, during the cap stage of 3rd molar germs. In contrast, BDNF was predominantly localized in dental papilla cells and odontoblasts during the root formation stage. These results suggest that neuroregulatory molecules, such as BDNF, slit2 and ephrin-B2, may be important in identifying therapeutic targets for modulating dental pulp pain.

Automated dentition segmentation: 3D UNet-based approach with MIScnn framework.

INTRODUCTION: Advancements in technology have led to the adoption of digital workflows in dentistry, which require the segmentation of regions of interest from cone-beam computed tomography (CBCT) scans. These segmentations assist in diagnosis, treatment planning, and research. However, manual segmentation is an expensive and labor-intensive process. Therefore, automated methods, such as convolutional neural networks (CNNs), provide a more efficient way to generate segmentations from CBCT scans. METHODS: A three-dimensional UNet-based CNN model, utilizing the Medical Image Segmentation CNN framework, was used for training and generating predictions from CBCT scans. A dataset of 351 CBCT scans, with ground-truth labels created through manual segmentation using AI-assisted segmentation software, was prepared. Data preprocessing, augmentation, and model training were performed, and the performance of the proposed CNN model was analyzed. RESULTS: The CNN model achieved high accuracy in segmenting maxillary and mandibular teeth from CBCT scans, with average Dice Similarity Coefficient values of 91.83% and 91.35% for maxillary and mandibular teeth, respectively. Performance metrics, including Intersection over Union, precision, and recall, further confirmed the model's effectiveness. CONCLUSIONS: The study demonstrates the efficacy of the three-dimensional UNet-based CNN model within the Medical Image Segmentation CNN framework for automated segmentation of maxillary and mandibular dentition from CBCT scans. Automated segmentation using CNNs has the potential to deliver accurate and efficient results, offering a significant advantage over traditional segmentation methods.

Three-dimensional evaluation of the association between tongue position and upper airway morphology in adults: A cross-sectional study.

Objective: This study aimed to evaluate the association between low tongue position (LTP) and the volume and dimensions of the nasopharyngeal, retropalatal, retroglossal, and hypopharyngeal segments of the upper airway. Methods: A total of 194 subjects, including 91 males and 103 females were divided into a resting tongue position (RTP) group and a LTP group according to their tongue position. Subjects in the LTP group were divided into four subgroups (Q1, Q2, Q3, and Q4) according to the intraoral space volume. The 3D slicer software was used to measure the volume and minimum and average cross-sectional areas of each group. Airway differences between the RTP and LTP groups were analyzed to explore the association between tongue position and the upper airway. Results: No significant differences were found in the airway dimensions between the RTP and LTP groups. For both retropalatal and retroglossal segments, the volume and average cross-sectional area were significantly greater in the patients with extremely low tongue position. Regression analysis showed that the retroglossal airway dimensions were positively correlated with the intraoral space volume and negatively correlated with A point-nasion-B point and palatal plane to mandibular plane. Males generally had larger retroglossal and hypopharyngeal airways than females. Conclusions: Tongue position did not significantly influence upper airway volume or dimensions, except in the extremely LTP subgroup.

Assessment of acute inhalation toxicity of citric acid and sodium hypochlorite in rats.

BACKGROUND: Citric acid (CA) and sodium hypochlorite (NaOCl) have been used to disinfect animals to protect them against avian influenza and foot-and-mouth disease. OBJECTIVES: We performed a good laboratory practice (GLP)-compliant animal toxicity study to assess the acute toxic effects of CA and NaOCl aerosol exposure in Sprague-Dawley rats. METHODS: Groups of five rats per sex were exposed for 4 h to four concentrations of the two chemicals, i.e., 0.00, 0.22, 0.67, and 2.00 mg/L, using a nose-only exposure. After a single exposure to the chemicals, clinical signs, body weight, and mortality was observed during the observation period. On day 15, an autopsy, and then gross findings, and histopathological analysis were performed. RESULTS: After exposure to CA and NaOCl, body weight loss was observed but recovered. Two males died in the CA 2.00 mg/L group and, two males and one female died in the 2.00 mg/L NaOCl group. In the gross findings and histopathological analysis, discoloration of the lungs was observed in the CA exposed group and inflammatory lesions with discoloration of the lungs were observed in the NaOCl exposed group. These results suggest that the lethal concentration 50 (LC50) of CA is 1.73390 mg/L for males and > 1.70 mg/L for females. For NaOCl, the LC50 was 2.22222 mg/L for males and 2.39456 mg/L for females. CONCLUSIONS: The Globally Harmonized System is category 4 for both CA and NaOCl. In this study, the LC50 results were obtained through a GLP-based acute inhalation toxicity assessment. These results provide useful data to reset safety standards for CA and NaOCl use.

Universal Stretchable Conductive Cellulose/PEDOT:PSS Hybrid Films for Low Hysteresis Multifunctional Stretchable Electronics.

Skin-attachable conductive materials have attracted significant attention for use in wearable devices and physiological monitoring applications. Soft, skin-like conductive films must have excellent mechanical and electrical characteristics with on-skin conformability, stretchability, and robustness to detect body motion and biological signals. In this study, a conductive, stretchable, hydro-biodegradable, and highly robust cellulose/poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) hybrid film is fabricated. Through the synergetic interplay of a conductivity enhancer, nonionic fluorosurfactant, and surface modifier, the mechanical and electrical properties of the stretchable hybrid film are greatly improved. The stretchable cellulose/PEDOT:PSS hybrid film achieves a limited resistance change of only 1.21-fold after 100 stretch-release cycles (30% strain) with exceptionally low hysteresis, demonstrating its great potential as a stretchable electrode for stretchable electronics. In addition, the film shows excellent biodegradability, promising environmental friendliness, and safety benefits. High-performance stretchable cellulose/PEDOT:PSS hybrid films, which have high biocompatibility and sensitivity, are applied to human skin to serve as on-skin multifunctional sensors. The conformally mounted on-skin sensors are capable of continuously monitoring human physiological signals, such as body motions, drinking, respiration rates, vocalization, humidity, and temperature, with high sensitivity, fast responses, and low power consumption (21 µW). The highly conductive hybrid films developed in this study can be integrated as both stretchable electrodes and multifunctional healthcare monitoring sensors. We believe that the highly robust stretchable, conductive, biodegradable, skin-attachable cellulose/PEDOT:PSS hybrid films are worthy candidates as promising soft conductive materials for stretchable electronics.

Synaptic vesicle protein 2b is expressed temporospatially in (pre)odontoblasts in developing molars.

The formation of dentin and enamel is initiated by the differentiation of odontogenic precursor cells into odontoblasts and ameloblasts, respectively. This study was performed to identify new molecules involved in the differentiation of odontogenic cells. The genes expressed differentially between the root stage (after the differentiation of odontogenic cells and dental hard-tissue formation) and the cap stage (before the differentiation of odontogenic cells and dental hard-tissue formation) were searched using differential display PCR. For the first time, synaptic vesicle protein (SV) 2b, an important transmembrane transporter of Ca(2+) -stimulated vesicle exocytosis, was identified as a differentially expressed molecule. Real-time PCR and western blotting revealed an increase in the transcriptional and translational levels of SV2b during or after the differentiation of odontogenic cells. Immunofluorescence revealed this molecule to be localized in not only fully differentiated odontoblasts but also in pre-odontoblasts before dentin matrix secretion. The expression pattern of the SV2a isoform was similar to that of the SV2b isoform, whereas the SV2c isoform showed a contrasting pattern of expression. After treatment with alendronate, an inhibitor of protein isoprenylation for the transport of secretory vesicles, the expression of SV2a and SV2b decreased, whereas that of SV2c increased. These results suggest that the SV2 isoforms are functional molecules of (pre)odontoblasts which may be involved in vesicle transport.

Biomechanical Efficacy and Effectiveness of Orthodontic Treatment with Transparent Aligners in Mild Crowding Dentition-A Finite Element Analysis.

Orthodontic treatment increasingly involves transparent aligners; however, biomechanical analysis of their treatment effects under clinical conditions is lacking. We compared the biomechanical efficacy and effectiveness of orthodontic treatment with transparent aligners and of fixed appliances in simulated clinical orthodontic treatment conditions using orthodontic finite element (FE) models. In the FE analysis, we used Model Activation/De-Activation analysis to validate our method. Fixed appliances and 0.75-mm and 0.5-mm thick transparent aligners were applied to a tooth-alveolar bone FE model with lingually-inclined and axially-rotated central incisors. Compared to the fixed appliance, the 0.75-mm and 0.5-mm transparent aligners induced 5%, 38%, and 28% and 21%, 62%, and 34% less movement of the central incisors and principal stress of the periodontal ligament and of the alveolar bone, respectively, for lingual inclination correction. For axial-rotation correction, these aligners induced 22%, 37%, and 40% and 28%, 67%, and 48% less tooth movement and principal stress of the periodontal ligament and of the alveolar bone, respectively. In conclusion, transparent aligners induced less tooth movement, it is sufficient for orthodontic treatment, but 0.5-mm aligners should be used for only mild corrections. Additionally, the Model Activation/De-Activation analysis method is suitable for FE analysis of orthodontic treatment reflecting clinical treatment conditions.

Association of the three-dimensional skeletal variables with self-recognition of facial asymmetry in skeletal Class III patients.

OBJECTIVES: To investigate the association between three-dimensional (3D) skeletal variables and self-recognition of facial asymmetry in skeletal Class III patients. MATERIALS AND METHODS: Questionnaires and cone beam computed tomography of 74 patients (42 men and 32 women; mean age: 22.8 ± 4.5 years) with skeletal Class III and facial asymmetry were collected retrospectively. Patients were classified into three groups: group Sy (recognition of symmetry), group NS (not sure), and group Asy (recognition of asymmetry), according to their responses to the questionnaires. To assess 3D anatomic differences in the maxillomandibular region, six 3D hard tissue variables: maxillary height, ramal length, frontal ramal inclination (FRI), lateral ramal inclination (LRI), mandibular body length (Mn BL), and mandibular body height (Mn BH) were compared among the three self-recognition groups. Six 3D hard tissue variables and Menton deviation were reduced into three factors and their association with the self-recognition of facial asymmetry was investigated. RESULTS: Maxillary height, FRI, LRI, Mn BH, and Menton deviation demonstrated significant differences among the three self-recognition groups. The reduced factors, which consisted of transverse and vertical parameters, and vertical parameter of the mandibular corpus, demonstrated significant differences among the three self-recognition groups. The difference in Mn BH influenced the self-recognition of facial asymmetry. CONCLUSIONS: Both the transverse and vertical parameter of the skeleton were determinant in self-recognition of facial asymmetry. Identification of the skeletal difference in the lateral view involving LRI and Mn BH should be included for assessment of facial asymmetry.

Relaxin is up-regulated in the rat ovary by orthodontic tooth movement.

Relaxin (Rln) is an ovarian hormone that stimulates osteoclastic and osteoblastic activities and connective tissue turnover. To investigate the expression of Rln during orthodontic tooth movement, rats were implanted with orthodontic appliances that connected a spring from the upper incisors to the first molar with a 70 cN force. Rats in each group were killed 6, 48, and 144 h after activating the appliance, and the levels of Rln1 and Rln3 expression in the ovary were determined by real-time RT-PCR, northern blots, western blots, and immunofluorescence analyses. The amount of tooth movement induced by the orthodontic force increased in a time-dependent manner. The levels of Rln1 mRNA increased by 12-, 41-, and 263-fold at 6, 48, and 144 h, respectively, after orthodontic tooth movement. The time-dependent increase in the concentration of Rln 1 protein in the ovary was also confirmed by western blotting. Rln 1 was localized in the granulosa cells of the ovarian follicles, and the immunoreactivity against Rln 1 was increased by the movement. In contrast, the concentration of Rln 3 was below the level of detection. The results of this study suggest that local changes in periodontal tissues induced by orthodontic tooth movement may affect Rln1 expression in the ovary. However, further studies are needed to decipher the mechanisms involved and the possible contribution of the increased level of expression of Rln 1 to the tooth movement.

Optimization of Anisotropic Crystalline Structure of Molecular Necklace-like Polyrotaxane for Tough Piezoelectric Elastomer.

While piezoelectric materials are applied in various fields, they generally exhibit poor mechanical toughness. To increase the applicability of these, their mechanical properties need to be improved. In this study, a tough piezoelectric polyrotaxane (PRX) elastomer was developed by blending PRX samples of two different lengths, formed using 10K and 35K poly(ethylene glycol), to align dipole moments for optimization of the piezoelectricity characteristics. The effects of the blending ratio on the crystalline structure of the obtained PRX elastomer were investigated by X-ray diffraction analysis and transmission electron microscopy. In addition, the ferroelectric and piezoelectric properties of the PRX elastomer were evaluated based on its polarization hysteresis loop and voltage generation characteristics, respectively. The PRX elastomer formed by using a ratio of 3:1 (ePR10k7535k25) exhibited a long-range-ordered anisotropic crystalline structure, resulting in a large polarization (Pr) value. As a result, ePR10k7535k25 showed greatly enhanced piezosensitivity against the mechanical vibrations generated by respiratory signals.

Identification of novel candidate genes implicated in odontogenic potential in the developing mouse tooth germ using transcriptome analysis.

BACKGROUND: In tooth bioengineering for replacement therapy of missing teeth, the utilized cells must possess an inductive signal-forming ability to initiate odontogenesis. This ability is called odontogenic potential. In mice, the odontogenic potential signal is known to be translocated from the epithelium to the mesenchyme at the early bud stage in the developing molar tooth germ. However, the identity of the molecular constituents of this process remains unclear. OBJECTIVE: The purpose of this study is to determine the molecular identity of odontogenic potential and to provide a new perspective in the field of tooth development research. METHODS: In this study, whole transcriptome profiles of the mouse molar tooth germ epithelium and mesenchyme were investigated using the RNA sequencing (RNA-seq) technique. The analyzed transcriptomes corresponded to two developmental stages, embryonic day 11.5 (E11.5) and 14.5 (E14.5), which represent the odontogenic potential shifts. RESULTS: We identified differentially expressed genes (DEGs), which were specifically overexpressed in both the E11.5 epithelium and E14.5 mesenchyme, but not expressed in their respective counterparts. Of the 55 DEGs identified, the top three most expressed transcription factor genes (transcription factor AP-2 beta isoform 3 [TFAP2B], developing brain homeobox protein 2 [DBX2], and insulin gene enhancer protein ISL-1 [ISL1]) and three tooth development-related genes (transcription factor HES-5 [HES5], platelet-derived growth factor D precursor [PDGFD], semaphrin-3 A precursor [SEMA3A]) were selected and validated by quantitative RT-PCR. Using immunofluorescence staining, the TFAP2B protein expression was found to be localized only at the E11.5 epithelium and E14.5 mesenchyme. CONCLUSIONS: Thus, our empirical findings in the present study may provide a new perspective into the characterization of the molecules responsible for the odontogenic potential and may have an implication in the cell-based whole tooth regeneration strategy.

Structural Insights into a Bifunctional Peptide Methionine Sulfoxide Reductase MsrA/B Fusion Protein from Helicobacter pylori.

Methionine sulfoxide reductase (Msr) is a family of enzymes that reduces oxidized methionine and plays an important role in the survival of bacteria under oxidative stress conditions. MsrA and MsrB exist in a fusion protein form (MsrAB) in some pathogenic bacteria, such as Helicobacter pylori (Hp), Streptococcus pneumoniae, and Treponema denticola. To understand the fused form instead of the separated enzyme at the molecular level, we determined the crystal structure of HpMsrABC44S/C318S at 2.2 Å, which showed that a linker region (Hpiloop, 193-205) between two domains interacted with each HpMsrA or HpMsrB domain via three salt bridges (E193-K107, D197-R103, and K200-D339). Two acetate molecules in the active site pocket showed an sp2 planar electron density map in the crystal structure, which interacted with the conserved residues in fusion MsrABs from the pathogen. Biochemical and kinetic analyses revealed that Hpiloop is required to increase the catalytic efficiency of HpMsrAB. Two salt bridge mutants (D193A and E199A) were located at the entrance or tailgate of Hpiloop. Therefore, the linker region of the MsrAB fusion enzyme plays a key role in the structural stability and catalytic efficiency and provides a better understanding of why MsrAB exists in a fused form.

Infrared Clinical Enamel Crack Detector Based on Silicon CCD and Its Application: A High-Quality and Low-Cost Option.

Enamel cracks generated in the anterior teeth not only affect the function but also the aesthetics of the teeth. Chair-side tooth enamel crack detection is essential for clinicians to formulate treatment plans and prevent related dental disease. This study aimed to develop a dental imaging system using a near-IR light source to detect enamel cracks and to investigate the relationship between anterior enamel cracks and age in vivo. A total of 68 subjects were divided into three groups according to their age: young, middle, and elderly. Near-infrared radiation of 850 nm was used to identify enamel cracks in anterior teeth. The results of the quantitative examination showed that the number of enamel cracks on the teeth increased considerably with age. For the qualitative examination, the results indicated that there was no significant relationship between the severity of the enamel cracks and age. So, it can be concluded that the prevalence of anterior cracked tooth increased significantly with age in the young and middle age. The length of the anterior enamel cracks tended to increase with age too; however, this result was not significant. The silicon charge-coupled device (CCD) with a wavelength of 850 nm has a good performance in the detection of enamel cracks and has very good clinical practicability.