Comparison of Posttreatment Stability Between Mandibular Setback Surgery-Early and Conventional Surgery in Class III Patients: A 4.6-Year Follow-Up.

OBJECTIVES: This retrospective study aims to compare long-term stability between the mandibular setback surgery-early (MSE) approach, involving minimal orthodontics, and the mandibular setback conventional surgery (MCS) approach, involving sufficient orthodontics, in Class III patients with mandibular prognathism. METHODS: Among 210 patients who underwent orthognathic surgery, a total of 40 subjects were enrolled based on standardized inclusion criteria: only mandibular surgery, <5 mm setback difference between right and left of the mandible, orthodontics with fixed appliances, and more than 2 years of follow-up after treatment. These patients were allocated to the MSE (n = 20) and MCS groups (n = 20) according to the duration of presurgical orthodontics. Changes in cephalometric measurements were compared between the MSE and MCS groups before surgery (T0), 1 month after surgery (T1), at the end of treatment (T2), and posttreatment retention (T3). RESULTS: The MSE and MCS groups had a mean presurgical orthodontic duration of 2 and 9.5 months, respectively. From T1 to T2, the MSE group showed a significantly larger forward movement of the mandible than the MCS group (2.1 versus 0.7 mm; P < 0.001). In addition, from T2 to T3 (average 4.6 years), the MSE group presented anterior relapse of 0.6 mm in the mandible, but there were no statistically significant intergroup differences. CONCLUSION: Although the MSE group showed greater postsurgical forward mandibular relapse than the MCS group, the two groups exhibited similar skeletal and dental stability during the posttreatment retention.

Survival analysis of implants after surgical treatment of peri-implantitis based on bone loss severity and surgical technique: a retrospective study.

BACKGROUND: Few trials have compared the results of surgical treatment for peri-implantitis based on severity of peri-implantitis and surgical method. This study investigated the survival rate of implants based on type of surgical method used and initial severity of peri-implantitis. Classification of severity was determined based on bone loss rate relative to fixture length. METHODS: Medical records of patients who underwent peri-implantitis surgery from July 2003 to April 2021 were identified. Classification of peri-implantitis was divided into 3 groups (stage 1: bone loss < 25% (of fixture length), stage 2: 25% < bone loss < 50%, stage 3: bone loss > 50%) and performance of resective or regenerative surgery was investigated. Kaplan-Meier survival curves and Cox hazards proportional models were used to analyze the cumulative survival rate of implants. Median survival time, predicted mean survival time, hazard ratio (HR), and 95% confidence interval (CI) were calculated. RESULTS: Based on Kaplan-Meier analysis, 89 patients and 227 implants were included, and total median postoperative survival duration was 8.96 years. Cumulative survival rates for stage 1, 2, and 3 were 70.7%, 48.9%, and 21.3%, respectively. The mean survival time for implants in stage 1, 2, and 3 was 9.95 years, 7.96 years, and 5.67 years, respectively, with statistically significant difference (log-rank p-value < 0.001). HRs for stage 2 and stage 3 were 2.25 and 4.59, respectively, with stage 1 as reference. Significant difference was not found in survival time between resective and regenerative surgery groups in any peri-implantitis stage. CONCLUSIONS: The initial bone loss rate relative to the fixture length significantly correlated with the outcome after peri-implantitis surgery, demonstrating a notable difference in the long-term survival rate. Difference was not found between resective surgery and regenerative surgery in implant survival time. Bone loss rate could be utilized as a reliable diagnostic tool for evaluating prognosis after surgical treatment, regardless of surgical method used. TRIAL REGISTRATION: Retrospectively registered. (KCT0008225).

Low Bone Density Predictability of CBCT and Its Relation to Primary Stability of Tapered Implant Design: A Pilot Study.

Research regarding bone density assessment using cone beam computed tomography in low bone density regions is sparse. This in vitro study aimed to evaluate the predictability of cone beam computed tomography for low bone density regions and its correlations with primary implant stability when placing tapered design implants with a stepped osteotomy. Eighteen porcine mandibular condyles were used as simulated low bone density regions. Hounsfield units (HU), obtained via multislice computed tomography, and gray values (GV), obtained via cone beam computed tomography, were measured three times at one-month intervals. The maximum implant insertion torque (MIT) and implant stability quotient (ISQ) were recorded as the taper design implants were placed using a stepped osteotomy. HU and GV were measured as 335.05-803.07 and 389.98-906.40, respectively. For repeated measurements of HU and GV, the intraclass correlation coefficients were 0.989 and 0.980; the corresponding value for mean HU and GV was 0.768. Bland-Altman plots showed a mean difference between HU and GV of -78.15. Pearson correlation coefficients revealed a strong correlation between HU and GV (r=0.91, p<0.01). The mean ± standard deviation values for MIT and ISQ were 36.44 ± 6.64 Ncm and 80.85 ± 2.03, respectively, but no statistically significant correlations were found with GV and HU. Within the study's limitations, GV showed similar bone density estimation compared to HU in soft bones. Tapered implant placement with a stepped osteotomy achieved stable primary implant stability in soft bones. However, these in vitro results need to be approved in further clinical studies.

Long-term evaluation of the prognosis of super hydrophilic surface treated CA implants: a retrospective clinical study.

BACKGROUND: This study was performed to evaluate the long-term clinical efficacy of the CA implants (Osstem Implant, Busan, Korea), calcium-modified surfaced treated implants on acid-etched surfaces sandblasted with alumina. METHODS: From January 2013 to December 2015, 258 implants of 120 patients placed between 2013 and 2015 were retrospectively studied. Using medical records and periapical radiographs, sex, age, location, fixture width and length of placed implants, presence or absence of bone graft, types of bone substitutes and membrane used for bone grafting, primary and secondary stability, initial and delayed complications, and marginal bone loss were investigated. The success rate and survival rate of the implants in each group were analyzed retrospectively based on the criteria suggested by Albrektsson et al. RESULTS: Between 2013 and 2015, with a follow-up longer than 5 years, 258 implants with an average diameter of 4.63 mm (3.5-5.5 mm) and an average length of 9.94 mm (7.0-13.0 mm) were placed in a total of 120 patients (61 males and 59 females) with a mean age of 63.7 years for an average of 62 months of observation period. The survival rate was 97.3%, the success rate was 94.2%, and the average final marginal bone loss was 0.074 mm. CONCLUSION: The CA implants manufactured with the improved surface treatment method exhibited a survival rate of 97.3% and a success rate of 94.2% over an average observation period of 62 months. The implants were not affected by most factors and had very high survival and success rates over a long period of observation. In particular, the stability of the implant was excellent, with no cases of failed implants in delayed placement after bone grafting and a healing period.

Accuracy of dental implant placement with computer-guided surgery: a retrospective cohort study.

BACKGROUND: The aim of this study was to assess the accuracy of virtual planning of computer-guided surgery based on the actual outcomes of clinical dental implant placement. METHODS: This retrospective study enrolled patients among whom implant treatment was planned using computer-guided surgery with cone beam computed tomography (CBCT). The patients who received implant according to the guide with the flapless and flapped approach were classified as group 1 and 2, respectively, and the others who could not be placed according to the guide were allocated to the drop-out group. The accuracy of implant placement was evaluated with the superimposition of CBCT. RESULTS: We analyzed differences in the deviated distance of the entrance point and deviated angulation of the insertion of implant fixtures. With regard to the surgical approach, group 2 exhibited greater accuracy compared to group 1 in deviation distance (2.22 ± 0.88 and 3.18 ± 0.89 mm, respectively, P < 0.001) and angulation (4.27 ± 2.30 and 6.82 ± 2.71°, respectively, P = 0.001). The limitations of guided surgery were discussed while considering the findings from the drop-out group. CONCLUSIONS: Computer-guided surgery demonstrates greater accuracy in implant placement with the flapless approach. Further research should be conducted to enhance the availability of guides for cases with unfavorable residual bone conditions.

Accuracy of intraoral scan images in full arch with orthodontic brackets: a retrospective in vivo study.

OBJECTIVES: The purpose of this retrospective study was to evaluate the accuracy of intraoral scan (IOS) images in the maxillary and mandibular arches with orthodontic brackets. MATERIAL AND METHODS: From digital impressions of 140 patients who underwent orthodontic treatment, consecutive IOS images were selected based on standardized inclusion criteria: Two pre-orthodontic IOS images (IOS1 and IOS2) of permanent dentition with fully erupted second molars and IOS images obtained immediately after orthodontic bracket bonding (IOSb). Superimpositions were performed to evaluate the reproducibility of repeated IOS images. Accuracy of IOSb images was analyzed by comparing the average surface errors between IOS1c and IOS2c images, which were IOS images cut based on the same region of the interest as between IOS1 and IOSb images. RESULTS: A total of 84 IOS images was analyzed. The average surface errors between IOS1 and IOS2 images were 57 ± 8 µm and 59 ± 14 µm in the maxillary and mandibular arch, respectively, and their reliability was almost perfect. The average errors between IOSb and IOS1c images exhibited an increase, which measured 97 ± 28 µm in the maxillary arch and 95 ± 29 µm in the mandibular arch. These surface deviations between IOSb and IOS1c images were significantly larger in each region as well as entire dentition (P < 0.001) compared to those between IOS1c and IOS2c images. CONCLUSIONS: The average surface errors of the scans with brackets showed increased values compared with those without brackets. This suggests that orthodontic brackets could affect the trueness of intraoral scan images. CLINICAL RELEVANCE: It is necessary for clinicians to consider the effect of brackets on digital impression when using IOS images in orthodontic patients.

Soft Tissue Changes After Clockwise Rotation of Maxillo-Mandibular Complex in Class III Patients: Three-Dimensional Stereophotogrammetric Evaluation.

OBJECTIVES: To evaluate the linear, angular, and volumetric changes of soft tissue after clockwise repositioning of the maxillo-mandibular complex in skeletal class III patients using three-dimensional (3D) stereophotogrammetry and to determine the correlation between changes in the skeletal and soft tissue variables. METHODS: This study included 18 skeletal class III patients who underwent two-jaw surgery; superior impaction and clockwise rotational movement of the maxilla with the rotation center at upper incisors, and setback of the mandible. Lateral cephalograms and 3D photographs taken before and 6 months after surgery were compared. RESULTS: After maxillary impaction of anteriorly 1.7 mm and posteriorly 3.1 mm, and mandibular setback of 8.7 mm, the volume of lower lip and chin region decreased significantly by 33.6 cm3 (13% net change, P < 0.001), while paranasal and upper lip region volume increased by 3.2 cm3 (2%) and 7.2 cm3 (4%), respectively. CONCLUSION: The clockwise rotation of maxillo-mandibular complex in class III patients significantly reduced lower lip and chin volume with minimal increase in paranasal and upper lip volumes. 3D stereophotogrammetry can provide quantitative evaluation of facial soft tissue volumetric changes.

Analysis of Sagittal Position Changes of the Condyle After Mandibular Setback Surgery Across the Four Different Types of Plating Systems.

ABSTRACT: The authors analyzed the three-dimensional postoperative condylar position change across the plating systems. This retrospective study was conducted with the patients who underwent bilateral sagittal split ramus osteotomy with setback surgery. The condylar change was analyzed from preoperative cone-beam computed tomography to postoperative 1 month (T1) and postoperative 6 months (T2) using superimposition software, automatically merging based on the anterior cranial base. The condylar changes during T1 and T2 were analyzed across the four types of plates (4-hole sliding, heart-shaped, 3-hole sliding, and 4-hole conventional) Mean intraclass correlation coefficient values were consistently high for each measurement (>0.850). During T1, the conventional plate had a decreased condylar anterior distance when compared with the 3-hole sliding plate (P = 0.032). During T2, the conventional plate had an increased condylar posterior distance when compared with the 3-hole sliding plate (P = 0.031). Superimposition software based on the anterior cranial base could be available for measurement of condylar position with highly reproducible results. After bilateral sagittal split ramus osteotomy, the 3-hole sliding plate could effectively compensate for the anterior displacement of the condyle compared to other plates.

Prognosis of single tooth implants following alveolar ridge preservation with two recombinant human bone morphogenetic protein-2 delivery systems.

BACKGROUND: We previously reported similar efficacies of alveolar ridge preservation (ARP) on single extraction socket with two different E. coli derived recombinant human bone morphogenetic protein-2 (rhBMP-2) delivery systems (Cowell BMP, Cowell medi Co, Busan, Korea; ß-tricalcium phosphate and hydroxyapatite particle & O-BMP, Osstem Implant Co, Busan, Korea; absorbable collagen sponge). After the trial, we completed implant therapy and observed over an average of 3 years. This follow-up study was performed retrospectively to compare result of implant treatment at the preserved alveolar ridge site. METHODS: Patients who underwent extraction of single tooth and received ARP with one of two rhBMP-2 delivery systems from October 2015 to October 2016 were enrolled. Twenty-eight patients (Group 1: Cowell BMP 14; Group 2: O-BMP 14) who underwent implant therapy and prosthetic treatment were included in study. Stability and marginal bone loss (MBL) of each implant were collected from medical charts and radiographs, and analyzed. The survival and success rates of implants were calculated. RESULTS: The primary implant stability represented by implant stability quotient (ISQ) for Groups 1 and 2 was 69.71 and 72.86, respectively. The secondary implant stability for Groups 1 and 2 was 78.86 and 81.64, respectively. Primary and secondary stabilities were not statistically different (P = 0.316 and 0.185, respectively). MBL at the latest follow-up was 0.014 mm in Group 1 over 33.76 ± 14.31 months and 0.021 mm in Group 2 over 40.20 ± 9.64 months, with no significant difference (P = 0.670). In addition, the success rate of implants was 100% (14/14) in Group 1 and 92.9% (13/14) in Group 2, with survival rate of 100% (14/14) in Group 1 and 92.9% (13/14) in Group 2. CONCLUSIONS: We confirmed good prognosis in both groups as a result of implant therapy after ARP with each of two rhBMP-2 carriers.

Associations between mandibular torus and types of temporomandibular disorders, and the clinical usefulness of temporary splint for checking bruxism.

BACKGROUND: Occlusal stress from oral parafunctional habits is one of the causes of temporomandibular disorders (TMD) and mandibular torus (MT). Although some studies have investigated the correlation between TMD and MT, understanding of the relationships between types of TMD and MT is insufficient. Therefore, we conducted this study to investigate the associations between presence of MT and TMD types. METHODS: This study included 77 patients diagnosed with TMD who first visited our clinic for TMD between March 2019 and July 2020. Among them, 30 (38.9%) had MT, and 54 (70.1%) had oral parafunction. Parafunctional activity during sleep was confirmed using a temporary splint for checking bruxism (TSCB). RESULTS: The relationship between prevalence of MT and oral parafunction in TMD patients was not statistically significant (P = 0.131), but the odds ratio was relatively high at 2.267. An analysis of TMD type revealed that Type I, which is classified as myalgia of the masticatory muscles, and MT had a significant association (P = 0.011). We fabricated a TSCB for 27 patients to wear during sleep and confirmed that 23 (85.2%) had nocturnal bruxism. The TSCB results and presence of MT showed a significant relationship (P = 0.047). CONCLUSION: Through the results of this study, clinicians may consider the hyperactivity of masticatory muscles in the presence of MT when treating TMD patients. In addition, TSCB has a great diagnostic value as it can be easily manufactured and be useful for discovering pre-existing oral parafunctions that patients are not aware of.

A randomized controlled clinical trial evaluating efficacy and adverse events of different types of recombinant human bone morphogenetic protein-2 delivery systems for alveolar ridge preservation.

OBJECTIVES: This 12-week clinical trial evaluated efficacy and adverse events for two recombinant human bone morphogenetic protein-2 (rhBMP-2) delivery systems in alveolar ridge preservation. MATERIALS AND METHODS: Sixty-four patients had a single tooth that required replacement with an implant, surrounded by > 50% alveolar bone height. Two cohorts (n = 32 patients each) were randomized to receive a rhBMP-2-soaked absorbable collagen sponge (test group), or ß-tricalcium phosphate and hydroxyapatite particles (control group) immersed in rhBMP-2, at the implant site. Bone height and width changes at 25%, 50%, and 75% of extraction socket level (ESL) were compared. Adverse events were assessed in the same period. In addition to the randomized controlled clinical trial, histological analysis of 21 patients (test group [n = 12], control group [n = 9]) was conducted, 4 months after alveolar ridge preservation. A non-inferiority test was used to analyze changes in alveolar bone height between groups (p = 0.05). A Wilcoxon rank-sum test was used to analyze changes in alveolar bone width and histomorphometric results between groups (p = 0.05). RESULTS: All patients showed good healing without severe adverse events. The lower limit of the one-sided 97.5% confidence interval in the difference between the two groups was 0.0033 (non-inferiority margin: -0.185); thus, the test group showed non-inferiority to the control group. Wilcoxon rank-sum test analysis did not show statistically significant differences between groups with regard to changes in alveolar bone width and histomorphometric analysis. CONCLUSIONS: The delivery systems showed similar efficacy for alveolar ridge preservation without severe adverse events.

Factors Related to Relapse After Mandibular Setback Surgery With Minimal Presurgical Orthodontics.

PURPOSE: The aims of this study were to compare the presurgical conditions, surgical changes, and postsurgical changes in patients with skeletal Class III malocclusion with different degrees of horizontal relapse after mandibular setback surgery (MS) with minimal presurgical orthodontics (MPO) and to identify the factors contributing to this relapse. MATERIALS AND METHODS: For this retrospective study, 33 consecutive patients who underwent MS-MPO were selected. Lateral cephalograms were taken preoperatively (T0), 1 month after surgery (T1), and at orthodontic debonding (T2). Patients were divided into low relapse (LR; n = 18; relapse, <1 mm) and high relapse (HR; n = 15; relapse, >2 mm) groups based on the cephalometric distance of mandibular horizontal relapse. Paired t test, independent t test, and Pearson correlation analysis were used to evaluate surgical (T0 to T1) and postsurgical (T1 to T2) changes in the skeletodental variables and to explore the relation between surgical changes and horizontal relapse. RESULTS: Compared with the LR group, the HR group exhibited more upward movement with counterclockwise rotation of the mandible from T1 to T2. The HR group presented at T0 with a more prognathic mandible, greater vertical facial height, and a positive overbite. In addition, the HR group presented more posterior movement with clockwise rotation of the mandible, increased overjet, and decreased overbite from T0 to T1. Horizontal relapse of the mandible was positively correlated with the amount of setback and clockwise rotation of the mandible and the change in overjet and was negatively correlated with the change in overbite. CONCLUSIONS: Mandibular instability was related to the extent of setback and clockwise rotation of the mandible, decreased overbite, and increased overjet during MS-MPO.

Maxillary Sinus Augmentation With Calcium Phosphate Double-Coated Anorganic Bovine Bone: Comparative Multicenter Randomized Clinical Trial With Histological and Radiographic Evaluation.

PURPOSE: The purpose of this study was to evaluate the clinical, histological and radiographic outcomes of the calcium phosphate double-coated anorganic bovine bone (InduCera; Oscotec Inc., Seongnam, Gyeonggi, Republic of Korea) compared with that of anorganic bovine bone (Bio-Oss; Geistlich Biomaterials, Wolhusen, Switzerland) in maxillary sinus augmentation, prospectively. PATIENTS AND METHODS: Twenty-eight sinuses in 25 patients (3 bilateral) with vertical alveolar bone height from 2 to 5 mm were included in this study. The maxillary sinus was augmented with InduCera or Bio-Oss, followed by a healing period of 6 months. Trephine cores were obtained for histomorphometric evaluation with the implant placement. Cone-beam computed tomography (CBCT) scans were taken at 1 week and 6 months after sinus augmentation. RESULTS: The graft sites were healed without any notable complications in both groups. In histomorphometric analysis, the area of the newly formed bone was measured as 21.37 ± 8.87% for InduCera and 23.02 ± 5.88% for Bio-Oss, with no significant differences. Radiographically, no statistically significant differences were calculated between the groups in bone height at baseline, the height of bone augmentation, the final alveolar bone height (alveolar bone height + augmented height) after 6 months in panoramic radiograph. There were also no significant differences in the shrinkage rate of the grafted area volume in CBCT. CONCLUSION: Although calcium phosphate double-coated anorganic bovine bone showed no additional effect compared with anorganic bovine bone from a histological and radiographical point of view, it could be used as the bone graft material in maxillary sinus augmentation.

Autogenous demineralized dentin matrix from extracted tooth for the augmentation of alveolar bone defect: a prospective randomized clinical trial in comparison with anorganic bovine bone.

OBJECTIVES: The aim of this study was to prospectively evaluate the clinical efficacy and histological outcome of the autogenous tooth graft material (AutoBT) compared to that of anorganic bovine bone (Bio-Oss® , Geistlich, Switzerland) in post-extraction alveolar bone augmentation. PATIENTS AND METHODS: A total of 33 graft sites in 24 patients were included in this study. AutoBT was used in 21 sites of 15 patients and Bio-Oss® was used in 12 sites of 9 patients for alveolar bone augmentation 2-4 weeks after dental extraction. Vertical dimension of grafted bone was measured both at the time of graft placement and at implant fixture placement after 6 months. Trephine cores were harvested for the histomorphometric evaluations during implant placement when feasible. The primary stability of implant fixture was also measured. RESULTS: Infection of graft material or graft bed was not observed and graft sites healed without any notable complications in both groups. The vertical dimensions of alveolar bone increased by 5.38 ± 2.65 mm in AutoBT group and 6.56 ± 3.54 mm in Bio-Oss® group at 6 months post-extraction. Histomorphometrically, new bone formation of AutoBT-grafted site was 31.24 ± 13.87% while that of Bio-Oss® was 35.00 ± 19.33%. The implant stability quotient (ISQ) of implants placed in AutoBT-grafted sites measured 72.80 ± 10.81 while those placed in Bio-Oss® -grafted sites measured 70.0 ± 12.86. There were no statistically significant differences between measurements of the two groups. CONCLUSION: Autogenous demineralized dentin matrix from extracted tooth grafted to extraction sockets for the augmentation of vertical dimension was as effective as augmentation using anorganic bovine bone. Both groups showed favorable wound healing, similar amount of implant stability, and histologically confirmed new bone formation. Thus, the results of this study suggest that autogenous tooth graft material is a viable option for alveolar bone augmentation following dental extraction.

Comparing Stability of Mandibular Setback Versus 2-Jaw Surgery in Class III Patients With Minimal Presurgical Orthodontics.

PURPOSE: The aim of this study was to compare treatment time and skeletal stability between mandibular setback surgery (MS) and 2-jaw surgery (2J) with minimal presurgical orthodontics (MPO) in patients with skeletal Class III. MATERIALS AND METHODS: One hundred ninety-five patients who underwent orthognathic surgery were enrolled in this retrospective cohort study. Consecutive patients were selected based on standardized inclusion criteria: Class III malocclusion with mandibular prognathism, surgery type, and presurgical orthodontics with non-extraction for less than 6 months (MPO). Lateral cephalograms were taken before surgery (T0), 1 month after surgery (T1), and at debonding (T2). To evaluate surgical changes (T0 to T1) and postsurgical changes (T1 to T2) in skeletodental tissue, linear, angular, and dental measurements were analyzed using paired t test and independent t test. RESULTS: Thirty-one patients were allocated to the MS-MPO group (n = 16) and the 2J-MPO group (n = 15). The 2J-MPO group showed a shorter duration of postsurgical orthodontic and total surgical and orthodontic treatment than the MS-MPO group. Although the 2J-MPO group exhibited advancement and superior impaction of the maxilla from T0 to T1, posterior movement with clockwise rotation of the mandible between the 2 groups did not show a statistical difference. In addition, from T1 to T2, the MS-MPO and 2J-MPO groups presented forward and upward movement and counterclockwise rotation of the mandible, but no intergroup difference was found. CONCLUSIONS: The MS-MPO and 2J-MPO groups showed similar horizontal and vertical mandibular stability. However, the 2J-MPO group presented a shorter surgical and orthodontic treatment time than the MS-MPO group.

Sinus Membrane Elevation by the Crestal Approach Using a Novel Drilling System.

PURPOSE: The purpose of this study was to evaluate the clinical outcomes of patients undergoing sinus membrane elevation by a minimally invasive crestal approach using a novel drilling system. MATERIALS AND METHODS: From May 2008 to November 2009, 21 implants were placed in 19 patients (10 men and 9 women) ranging from 23 to 69 years of age (average of 49.5 years). Implants were placed in maxillary premolar and molar areas that demonstrated insufficient residual bone quality; maxillary sinus membrane elevation was performed using a crestal approach with the sinus crestal approach kit (Neobiotech, Seoul, Korea). RESULTS: There was no sinus perforation or osseointegration failure. The implant survival rate was 100%. The postsurgical, augmented volume of the alveolar height ranged from 2 to 9.2 mm (average of 5.81 ± 2.06 mm). Six months after maxillary sinus elevation, the bone reduction volume ranged from 0.06 to 1.42 mm (average of 0.6 ± 0.38 mm). At final F/U, the amount of bone-height reduction ranged from 0.06 to 2.60 mm (average of 0.82 ± 0.63 mm). CONCLUSION: Sinus membrane elevation by the crestal approach using special reamers is advantageous because of the noticeable reduction in the risk of perforation and the ability to perform the surgery rapidly.

Conservative interdisciplinary treatment of a case with multiple facial and condyle fractures.

The purpose of this case report is to describe an interdisciplinary approach for a 51-year-old male who underwent multiple facial fractures including bilateral condyle fractures. The patient underwent emergency surgery, which included open reduction of the maxilla and mandibular symphysis and closed reduction of the bilateral condyle fractures. Although the patient recovered a comfortable range of mouth opening and alleviation of the temporomandibular joint (TMJ) symptoms after surgery, he suffered from a large anterior-posterior discrepancy due to less stability on the condyle-fossa relationships and from open bite with contacts only on both second molars and right second premolars. In this case, first, to increase the occlusal contact, comprehensive orthodontic treatment was completed. Second, occlusal equilibration was selectively performed to relieve the interferences and establish a stable range of mandibular movement without any changes in the vertical dimension. Third, both the upper central incisors and left lateral incisor were minimally restored with splinted and single zirconia crowns, which had modified lingual contours to provide adequate anterior guidance permitting the anterior-posterior discrepancy of the posterior teeth during protrusion. This conservative interdisciplinary treatment, including open and closed reduction, orthodontic treatment, occlusal adjustment, and minimal prosthetic restorations, resulted in a stable mandibular position and recovery of mastication function.

Demineralized dentin matrix scaffolds for alveolar bone engineering.

From the point of view of implant dentistry, this review discusses the development and clinical use of demineralized dentin matrix (DDM) scaffolds, produced from the patient's own extracted teeth, to repair alveolar bone defects. The structure and the organic and inorganic components of DDM are presented to emphasize the similarities with autogenous bone. Studies of DDM properties, such as osteoinductive and osteoconductive functions as well as efficacy and safety, which are mandatory for its use as a bone graft substitute, are also presented. The clinical applications of powder, block, and moldable DDM are discussed, along with future developments that can support growth factor and stem cell delivery.

Guided Bone Regeneration Using Demineralized Dentin Matrix: Long-Term Follow-Up.

PURPOSE: This case report reviews the long-term clinical outcomes of using demineralized dentin matrix (autogenous tooth bone graft material [AutoBT]) in 5 cases that were first reported in 2010. MATERIALS AND METHODS: Cone-beam computerized tomography was used to measure the height and width of the graft to determine the change in bone area from immediately after surgery to final follow-up (average, 5 yr 5.8 months). Corticocancellous bone formation and marginal bone resorption also were evaluated histologically 3 to 6 months after grafting, which focused mainly on remodeling capacities. RESULTS: Decreases in buccal height and alveolar ridge width ranged from -0.4 to -3.3 mm and from -0.4 to -4.2 mm, respectively. The change in bone area ranged from -8.1 to -36.2%. Corticocancellous bone had formed and was maintained successfully except for 1 mm of buccal marginal bone resorption in 1 case followed for 6 years 7 months. CONCLUSION: AutoBT, which was first reported for guided bone regeneration, showed that the corticocancellous bone that had formed had been maintained successfully with an implant after an average follow-up of 5 years. Although the number of samples was small, the results were consistent with those of other short-term follow-up studies on AutoBT.

Comparison of the Stability After Mandibular Setback With Minimal Orthodontics of Class III Patients With Different Facial Types.

PURPOSE: Most studies on the surgery-first approach focused on skeletal relapse compared with conventional surgery. The objective of this study was to compare the stability of skeletal Class III patients with 2 different vertical facial types after mandibular setback surgery (MS) with minimal orthodontic preparation (MO). MATERIALS AND METHODS: In this retrospective study, the patients were recruited from a population that had undergone MS. Consecutive patients were selected based on the following inclusion criteria: skeletal Class III malocclusion with mandibular prognathism, MO without extraction for less than 6 months, and sagittal split ramus osteotomy. The vertical facial types of the patients were classified based on the Frankfort mandibular-plane angle (FMA). Lateral cephalograms were taken at the presurgical stage, at 1 month after surgery (T1), and at the debonding stage (T2). To evaluate surgical changes (T1 - presurgical stage) and relapse (T2 - T1), the linear, angular, and dental measurements were analyzed using a paired t test and an independent t test. RESULTS: The 26 patients were divided into 2 groups: normal-angle group (n = 14; mean FMA, 23.58°) and high-angle (HA) group (n = 12; mean FMA, 30.26°). From T1 to T2, the normal-angle and HA groups showed significant forward and counterclockwise rotation of the mandible (distance between pogonion and perpendicular line to Frankfort horizontal plane from sella, 1.71 mm and 1.51 mm, respectively; distance between menton and perpendicular line to Frankfort horizontal plane from sella, 1.91 mm and 1.60 mm, respectively; angle between articulare-menton line and Frankfort horizontal plane, -0.55° and -0.89°, respectively). The HA group showed a significant upward movement of the mandible (distance from Frankfort horizontal plane to pogonion, -1.13 mm; distance from Frankfort horizontal plane to menton, -0.78 mm). However, there was no significant difference in the skeletal-dental changes between the 2 groups from T1 to T2. CONCLUSIONS: The vertical facial types of Class III patients with similar prognathic mandible and dental patterns may not cause any differences in the relapse pattern after MS-MO.