Influencing factors of examiner: Examples from certificated orthodontists board examination.

BACKGROUND: The rating result reflects not only the performance of the candidate but some extent of the examiner's preference. Examiner bias could be objective, which means it can't be changed by the examiner like gender, age, race, educational level, or professional experience. No study about examiner bias was performed in the dental education realm, especially in the orthodontic field. Therefore, this study aimed to figure out possible influencing factors in examiners from examples of the Taiwan Board of Orthodontist examination. METHODS: The examiner groups comprised 29 males and 21 females selected from the certificated Taiwan Board of Orthodontists. Every examiner would receive a series of lectures about rating standards before the exam. The score data were collected from 2009 to 2019. RESULTS: As for the univariate regression model of the Taiwan Board of Orthodontist examination, the experienced examiner with a certification of more than 15 years tends to rate more leniently, but female examiners tend to rate harsher. The scores would increase with the examiner's age in both the univariate regression model of self-prepared and assigned cases. CONCLUSION: As for the multivariate model of self-prepared exams, the elder and the examiner who work in private practice clinics tend to rate more leniently. As for the multivariate model of the assigned case exam, the score would be only affected by age. However, further studies are necessary to determine the direct relation among these factors.

Restoration of a wide edentulous posterior site with two small-diameter implants: Biologically-driven alternative treatment.

BACKGROUND/PURPOSE: Crestal bone stability, implant rigidity and occlusal loading are issues with small-diameter implants. This article demonstrates the use of two small-diameter implants replacing a missing wide edentulous site and discusses factors that may affect bone changes. METHODS: Patients who wanted to restore an edentulous space measuring from 12 to 14 mm wide in the posterior region were offered an alternative treatment option, using two narrow or regular-diameter implants instead of one wide implant. In the study, the crestal bone stability of 12 implants in 6 edentulous sites was assessed by cone beam CTs and periapical radiographs in follow-up visits for up to 4 years. RESULTS: The bone level of all the implants was stable at buccal, lingual, mesial and distal sites, with mean values < 1 mm. The average buccal bone thickness was 1.15 ± 1.07 mm and lingual was 1.86 ± 0.89 mm, meaning that implants were surrounded by a sufficient amount of bone. The good treatment outcome may be attributed to the capability of fabricating better emergence profiles, angles (Mean: 20.67 ± 7.82° at the mesial and 20.25 ± 8.23° at the distal site) and cleansable embrasures of prostheses which are key to maintaining good oral hygiene and implant health. CONCLUSION: Using two narrow or regular-diameter implants to replace a single edentulous site measured around 12-14 mm wide in posterior region seemed to be a feasible treatment option. It is especially suitable for sites with ridge atrophy and/or patients suffering from systemic diseases.

Retrospective evaluation of gingival thickness and tissue stability after connective tissue grafting in Asian populations: 1 month to 3.5 years.

BACKGROUND/PURPOSE: The objectives of this retrospective study are to analyze post-surgical gingival thickness after connective tissue grafting in the Asian population and to assess its tissue stability for up to approximately 3.5 years. METHODS: A total of 111 grafted teeth and 57 nearby nongrafted teeth in 28 Asian patients who had undergone connective tissue grafting surgery were selected. Gingival thickness was measured by transgingival probing. The mean gingival thickness of the grafted teeth was compared with adjacent nongrafted teeth in the same individuals. The mean gingival thickness of the grafted teeth in different tooth types and at various time intervals were statistically analyzed. RESULTS: The average gingival thickness following connective tissue grafting is 1.99 ± 0.62 mm compared to 0.96 ± 0.40 mm with nongrafted teeth (P < .0001). The maxillary premolar is the tooth type that underwent connective tissue grafting most frequently in our study. Among different tooth types, mandibular molars showed the thickest gingival tissues whereas mandibular incisors presented the thinnest tissues. No statistically significant difference in the mean tissue thickness at different time intervals was observed. CONCLUSION: Connective tissue grafting is a predictable treatment modality for gingival phenotype conversion, even in Asians, achieving nearly 2 mm of gingival thickness on average, post-operation. Tissue stability after connective tissue grafting has been presented in our study. This quantitative assessment of the gingival thickness in Asians may encourage clinicians to deal with soft tissue architecture ahead of main surgical, restorative and orthodontic treatments in order to achieve pleasing treatment outcomes.

Three-phase treatment concept for skeletal Class III growing patients with severe space deficiency: A report of three cases with skeletally anchored maxillary protraction.

This report provides three-phase concept for treating skeletal Class III growing patients with severe space deficiency. Three cases are presented. All had received miniplate-anchored facemask treatment and followed till near completion of growth. Infrazygomatic miniplates were used for both facemask protraction and distalization of the dentition to relieve crowding. With the aid of bone-anchored facemask, maxillary protraction may be continued independent of the orthodontic tooth movement even in late postpubertal growth peak stage. With cephalometric superimpositions using the structural method, we have demonstrated how vertical dental change could affect the skeletal changes and overall clinical outcomes. The persistent mandibular growth during pubertal growth spurt plays a main role in decreasing the effects of maxillary protraction. To keep up with the mandibular growth, we recommend using skeletally anchored facemask long-term till the end of growth spurt. Applying maxillary protraction from infrazygomatic miniplates exposed at the molar area has the merits that it avoids unwanted palatal rotation and that the miniplates maybe used as orthodontic anchorage when indicated. We emphasize the importance of planning the treatment contemplating the skeletal developmental stage and the completion of dental arches. This prolonged orthopedic treatment may contribute to greater long-term effects and stability.

Staged orthodontic treatment in preparation for immediate implant placement: A clinical report with a 5-year follow-up.

Anterior implant restoration is one of the most challenging restorative procedures, especially for sites with vertical and/or horizontal hard and soft tissue deformities. Orthodontic extrusion before implant placement may be the best means of overcoming vertical deficiencies. This article describes a modification to the standard technique, involving staged orthodontic extrusion and buccal root torque. The main advantage of this modification is that it encourages bone and soft tissue development, thereby allowing the patient to receive immediate or early implant treatment. A clinical procedure is presented to illustrate the modified technique that resulted in an esthetically pleasing and stable 5-year outcome.

Airway increase after open bite closure with temporary anchorage devices for intrusion of the upper posteriors: Evidence from 2D cephalometric measurements and 3D magnetic resonance imaging.

OBJECTIVE: The aim of this study was to analyse morphological changes in the upper airways in patients with anterior open bite treated with temporary anchorage devices for intrusion of upper posterior teeth. MATERIALS AND METHODS: Twelve nonobese (body mass index: <25) anterior open bite patients between the ages of 19 and 44 years (mean age: 22.83 ± 8.19 years) were recruited for this study. Cephalometric radiographs and magnetic resonance imaging (MRI) scans before and after anterior bite closure without bracketing on anterior teeth were used to measure the upper airway, which was divided into retropalatal and retroglossal regions. RESULTS: The mandibular plane angle and lower facial height were significantly reduced by intrusion of the upper posteriors and autorotation of the mandible. The retroglossal airway width (AW2) and retroglossal area (RG area) measured on cephalometric radiographs both increased significantly after treatment. Retroglossal volume increased and the retroglossal width/length ratio decreased significantly in MRI analysis. All other measurements were not significantly changed. However, no statistically significant correlations were observed between all measurements in 2D and 3D images, with the exception of the AW2 linear measurement in 2D images correlating with the AP length in MRI axial view images (r = 0.56, P = 0.0430). CONCLUSION: Counterclockwise rotation of the mandible after anterior open bite closed using orthodontic treatment changed the airway morphology. Retroglossal volume significantly increased and the airway shape became less elliptical after bite closure.

Polishing mechanism of light-initiated dental composite: Geometric optics approach.

BACKGROUND/PURPOSE: For light-initiated dental hybrid composites, reinforcing particles are much stiffer than the matrix, which makes the surface rugged after inadequate polish and favors bacterial adhesion and biofilm redevelopment. The aim of the study was to investigate the polishing mechanism via the geometric optics approach. METHODS: We defined the polishing abilities of six instruments using the obtained gloss values through the geometric optics approach (micro-Tri-gloss with 20°, 60°, and 85° measurement angles). The surface texture was validated using a field emission scanning electron microscope (FE-SEM). Based on the gloss values, we sorted polishing tools into three abrasive levels, and proposed polishing sequences to test the hypothesis that similar abrasive levels would leave equivalent gloss levels on dental composites. RESULTS: The three proposed, tested polishing sequences included: S1, Sof-Lex XT coarse disc, Sof-Lex XT fine disc, and OccluBrush; S2, Sof-Lex XT coarse disc, Prisma Gloss polishing paste, and OccluBrush; and S3, Sof-Lex XT coarse disc, Enhance finishing cups, and OccluBrush. S1 demonstrated significantly higher surface gloss than the other procedures (p < 0.05). The surface textures (FE-SEM micrographs) correlated well with the obtained gloss values. CONCLUSION: Nominally similar abrasive abilities did not result in equivalent polish levels, indicating that the polishing tools must be evaluated and cannot be judged based on their compositions or abrasive sizes. The geometric optic approach is an efficient and nondestructive method to characterize the polished surface of dental composites.

NADPH oxidase 4 is involved in the triethylene glycol dimethacrylate-induced reactive oxygen species and apoptosis in human embryonic palatal mesenchymal and dental pulp cells.

OBJECTIVES: Triethylene glycol dimethacrylate (TEGDMA) is a common component of resin-based dental composites and endodontic sealers. TEGDMA induces apoptosis in several types of cells. However, the mechanisms are not completely understood. The aim of this study was to investigate the mechanisms underlying TEGDMA-induced apoptosis in human embryonic palatal mesenchymal (HEPM) pre-osteoblasts and primary human dental pulp (HDP) cells. MATERIAL AND METHODS: Cell viability was examined after TEGDMA treatment. Cell cycle progression was checked by flow cytometry. Apoptotic cells were evaluated using terminal deoxynucleotidyl transferase (TdT)-mediated dUTP nick end labeling assay and visualized by fluorescence microscopy. Western blot analyses were performed to determine expressions of apoptosis-related proteins. The production of reactive oxygen species (ROS) was detected using flow cytometry. NADPH oxidase 4 (NOX4) expression levels were investigated using real-time quantitative polymerase chain reaction and Western blot analyses. RESULTS: TEGDMA increased cytosol cytochrome c levels and activated caspase-9 in HEPM and HDP cells. TEGDMA decreased the expression of anti-apoptotic protein Bcl-XL. TEGDMA-induced apoptosis was inhibited by caspase-9-specific inhibitor, anti-oxidants, NOX inhibitor, NOX4 inhibitor, and NOX4 small interfering RNA (siRNA). TEGDMA increased ROS production and upregulated NOX4 mRNA and protein expression. TEGDMA-induced intracellular ROS production was inhibited by NOX inhibitor and NOX4 inhibitor. CONCLUSIONS: We demonstrate significant involvement of NOX4 in the TEGDMA-induced ROS. NOX4-derived ROS subsequently induces mitochondrial cytochrome c release leading to apoptosis through activation of the intrinsic apoptotic pathway. CLINICAL RELEVANCE: NOX4 may be a potential target for strategies to prevent or ameliorate the TEGDMA-induced toxicity in HEPM and HDP cells.

Tooth Wear in Older Adults: A Review of Clinical Studies.

INTRODUCTION: Tooth wear is a prevalent dental condition among older adults, leading to pain and adversely affecting aesthetics, functionality, and their overall quality of life. This review aims to update the information on tooth wear in older adults from the past five years and to provide guidance on the clinical management of tooth wear in older adults. METHODS: A literature search was conducted in three electronic databases, Scopus, Pubmed, and Embase, for English publications from January 2019 to December 2023 on clinical studies with participants aged 65 or above on tooth wear. A total of 307 articles were retrieved and 14 articles were finally included as references for this study. RESULTS: This review highlights the common causes of tooth wear and various risk factors, such as medical conditions, hyposalivation, dietary habits, oral hygiene practices, parafunctional habits, and occlusal factors, associated with tooth wear. It is crucial for oral health care professionals to diagnose and manage tooth wear at an early stage through a risk assessment and a clinical examination to avoid complex restorative procedures. Tooth wear management should prioritize prevention, aiming to control etiological and risk factors while employing non-restorative treatments. Restorative intervention, if indicated, should be simple, minimally invasive, and cost-effective. Tooth wear progression should be monitored regularly to determine if a further intervention is needed. CONCLUSION: Since the clinical studies on tooth wear in older adults over the past five years are limited and mainly cross-sectional, more interventional clinical studies are warranted to provide more clinical guidance on tooth wear management in older adults.

Improving oral health of older adults for healthy ageing.

The objective of this article is to discuss the importance of oral health in achieving healthy ageing and the role of all stakeholders in improving oral health for older adults. The World Health Organization defined healthy ageing as the process of developing and maintaining the functional ability that enables well-being in older age. It recognized healthy ageing as an important goal and the key to turn population ageing from a challenge to an opportunity. Healthy ageing has positive impacts on individual older adults, their families and societies. It enhances quality of life of older adults, strengthen family bonding of families and reduce resource demand of the societies. Maintaining oral health and function is essential in healthy ageing. Oral health affects systemic health, cognitive health and psychological health. Oral functions such as eating ensure nutritional health in older adults. Most oral diseases are preventable and oral function decline can be recovered by intervention. Unfortunately, oral diseases remain prevalent and oral function decline is being neglected in older adults. Policy makers, national dental associations, academics and healthcare professionals should collaborate to provide a patient-centred, comprehensive and integrated care to older adults. Health policy reforms are needed to reduce the global oral health inequalities in older adults. Population-wide prevention should be accessible, affordable and available to older adults. Universal oral health coverage is crucial for integration of oral health into general health care.

Questionnaire survey on the satisfaction of SimEx dental education system.

Background/purpose: The SimEx is dental training system that applies new technology in a computerized dental simulator. The purpose of this study was to understand the usability satisfaction of the SimEx dental education and evaluation system by dental students and dentists at Tohoku University. Materials and methods: In this study, the Tohoku University IRB execution number was 2020-3-33. The number of subjects accepted was 59 at Tohoku University and divided into 4 groups based on years of clinical experience (Group A: 0 years; Group B: 1-2 years; Group C: 2-5 years; Group D: at least 5 years), and a total of 58 usability questionnaires were collected. Subjects completed the SimEx Usability Satisfaction Questionnaire after operating the SimEx (EPED Inc., Kaohsiung, Taiwan) course, which contained 16 questions. Results: Among the 58 questionnaires collected by Tohoku University, there were 19 undergraduate students (4th∼6th grade), 12 post-graduate students, 14 residents, and 13 dentists. Significant differences between Group A and Group B, and between Group A and Group D were found (P < 0.05). The same results were obtained for the "experience satisfaction index". In the items where significant differences were found, longer clinical experience tended to result in lower scores. Conclusion: From these results, we can conclude that the SimEx education and evaluation system facilitates students' self-learning, and this system is very useful for continued study and clinical skill training for dentists, especially for students and junior dentists with high usability satisfaction.

Metformin Reduces Bone Resorption in Apical Periodontitis Through Regulation of Osteoblast and Osteoclast Differentiation.

INTRODUCTION: We have previously demonstrated that auxiliary metformin therapy promotes healing of apical periodontitis. Here we aimed to investigate the effects of metformin on osteoblast differentiation and osteoclast formation in cultured cells and rat apical periodontitis. METHODS: Murine pre-osteoblasts MC3T3-E1 and macrophages RAW264.7 were cultured under hypoxia (2% oxygen) or normoxia (21% oxygen) and stimulated with receptor activator of nuclear factor-κB ligand (RANKL) when indicated. Metformin was added to the cultures to evaluate its anti-hypoxic effects. Expressions of osteoblast differentiation regulator runt-related transcription factor 2 (RUNX2), RANKL, and osteoclast marker tartrate-resistant acid phosphatase (TRAP) were assessed by Western blot. Apical periodontitis was induced in mandibular first molars of 10 Sprague-Dawley rats. Root canal therapy with or without metformin supplement was performed. Periapical bone resorption was measured by micro-computed tomography. Immunohistochemistry was used to examine RUNX2, RANKL, and TRAP expressions. RESULTS: Hypoxia suppressed RUNX2 expression and enhanced RANKL synthesis in pre-osteoblasts. TRAP production increased in macrophages after hypoxia and/or RANKL stimulation. Metformin reversed hypoxia-induced RUNX2 suppression and RANKL synthesis in pre-osteoblasts. Metformin also inhibited hypoxia and RANKL-enhanced TRAP synthesis in macrophages. Intracanal metformin diminished bone loss in rat apical periodontitis. Comparing with vehicle control, cells lining bone surfaces in metformin-treated lesions had significantly stronger expression of RUNX2 and decreased synthesis of RANKL and TRAP. CONCLUSIONS: Alleviation of bone resorption by intracanal metformin was associated with enhanced osteoblast differentiation and diminished osteoclast formation in rat apical periodontitis. Our results endorsed the role of metformin as an effective medicament for inflammatory bone diseases.

Field survey of dental manpower in Taiwan's hospitals.

BACKGROUND/PURPOSE: In Taiwan, dental manpower in hospitals plays an important role in dental education other than clinical service. Questionnaires, as well as a field survey, were conducted to understand the situation of dental manpower in 2007 and 2008. METHODS: During the period from 2007 to 2008, questionnaires about dental administration, clinical dental practice, dental education, dental manpower and dental facilities were mailed to the dental departments of 165 hospitals located around Taiwan; 134 completed the questionnaire and mailed it back. The field survey was also carried out by visiting hospitals, to collect and gather information at the local level. There were 102 hospitals within the 134 hospitals which accepted the field survey; the rate was 62.0%. RESULTS: In 2008, the number of dentists working in the hospitals was 1,421, which was approximately 13% of the number of total dentists in Taiwan (9672). Within the 1,421 dentists, 675 were attending staffs and 745 dentists were training residents. Within the 675 attending dentists, 510 (75.6%) had dental specialist certificates and 272 (40.3%) had teaching positions in dental schools. There were 382 dental interns (6(th) year undergraduate students) taking the training programs in hospitals, most of whom were trained in medical centers (342/382, 89.5%). Moreover, there were 888 dental assistants, 338 of whom were nurses and the other 550 were hospital self-trained personnel. CONCLUSION: Comparing the dental manpower of different types of hospitals in Taiwan, the medical center was the best, followed by the regional hospital and the district hospital was last. When comparing 2008 with 2002, the numbers of both dentists and auxiliary personnel in Taiwan's hospitals increased with years. Although there were still only 13% dentists working in the hospital, they were responsible for teaching young dentists and doing research in hospitals. In other words, the quality of clinical service, teaching, and research in hospitals would influence the development of young dentists.

Effect of simulated debracketing on enamel damage.

BACKGROUND/PURPOSE: A smooth enamel surface after the removal of a bracket from a tooth is essential for both esthetic demands and the prevention of plaque accumulation. The purpose of this study was to evaluate enamel damage caused by three standardized debracketing techniques. METHODS: We established three standardized test devices based on the principles of the squeezing, shearing, and tensile testing methods, which were simulated using a How Plier (TASK 60-306), a Direct Bond Bracket Remover (TASK 60-335 T), and a Lift-Off Debracketing Instrument (3 M-Unitek 444-761), respectively. Thirty teeth in each group were evaluated after debracketing. An optical stereomicroscope and a CCD camera with a computerized image analysis system were used to ascertain the proportion of remnant adhesive area (RAE) on the enamel surface. Fractography was analyzed using a scanning electron microscope. RESULTS: The squeezing debracketing method exhibited the highest debonding force (54.3 ± 7.0 N) and the least damage to the enamel surface (RAE = 99.5% ± 2.4%). The tensile debracketing method preserved most of the adhesive on the enamel surface (RAE = 98.7% ± 3.3%) and required the least debonding force (6.8 ± 1.2 N). However, the shearing debracketing method exhibited a significantly higher debonding force (32.0 ± 8.2 N) and smaller RAE (77.3% ± 33.5%) compared to the tensile debracketing method (p < 0.05). Three specimens appeared to have vertical fractures on their enamel prisms when using the shearing method. CONCLUSION: With the proposed method, we conclude that the squeezing and tensile methods are acceptable for clinical use when debracketing, whereas the Direct Bond Bracket Remover may cause shearing failure, leading to a risk for enamel damage.

Effects of thread depth, taper shape, and taper length on the mechanical properties of mini-implants.

INTRODUCTION: The primary stability of a mini-implant is critical, since most orthodontic mini-implant failures occur at an early stage. As orthodontic mini-implants have restrictions in diameter and length, an optimal design of the shape is important for sufficient primary stability. The purpose of this study was to investigate the influence of various mini-implants design factors, including thread depth, degree of taper, and taper length on insertion torque, pullout strength, stiffness, and screw displacement before failure. METHODS: Finite element analyses were conducted first for identification of optimal design parameters. Four types of mini-implants with different design parameters were then custom manufactured and tested mechanically. All mechanical tests were performed in artificial bone with homogenous density to remove the variability associated with bone. RESULTS: Finite element results showed that, for mini-implants with a fixed external diameter of 2 mm, a thread length of 9.82 mm, and a pitch of 0.75 mm, those with greater thread depths, smaller taper degrees, and shorter taper lengths generated higher maximum stresses on the bone and thread elements. These mini-implants also had larger relative displacements. Maximum pullout resistance was attained with a core/external diameter ratio of 0.68. All mechanical results were compatible with the findings in the finite element analyses. CONCLUSIONS: Modification of the mini-implant design can substantially affect the mechanical properties. The finite element method is an effective tool to identify optimal design parameters and allow for improved mini-implant designs.

Intracanal Metformin Promotes Healing of Apical Periodontitis via Suppressing Inducible Nitric Oxide Synthase Expression and Monocyte Recruitment.

INTRODUCTION: We have previously shown that intracanal metformin ameliorates apical periodontitis, partially by modulation of osteoblast apoptosis. The action of metformin on other cell types pertinent to the development of apical periodontitis needs to be examined. In the present study, we aimed to analyze whether its effects on the expression of inducible nitric oxide synthase (iNOS) and monocyte recruitment contribute to the therapeutic effect on apical periodontitis. METHODS: Lipopolysaccharide (LPS)-induced expression of iNOS in a human monocytic cell line, Mono-Mac-6, was assessed by Western blot. The amount of nitrite in culture medium was assessed to quantify nitric oxide (NO) production. C-C motif chemokine ligand-2 (CCL-2) synthesis was measured by enzyme-linked immunosorbent assay. Experimental apical periodontitis in rats was treated with root canal debridement with or without intracanal metformin medication. Lesion progression was assessed by conventional radiography and micro-computed tomographic imaging. Cellular expression of iNOS and the number of monocytes/macrophages were assessed by immunohistochemistry. RESULTS: Metformin suppressed LPS-induced iNOS and NO production by monocytes. More importantly, metformin inhibited LPS-enhanced CCL-2 synthesis through modulation of the iNOS/NO pathway. Intracanal metformin reduced bone resorption associated with apical periodontitis and suppressed iNOS expression and monocyte recruitment. CONCLUSIONS: Our results confirmed the therapeutic efficacy of intracanal metformin for apical periodontitis. Suppression of monocyte recruitment through modulation of iNOS expression and NO production is an important mechanism underlying the beneficial effect of metformin.

A novel polyurethane-based root canal-obturation material and urethane acrylate-based root canal sealer--part I: synthesis and evaluation of mechanical and thermal properties.

Resilon (RealSeal; SybronEndo, Orange, CA) has been developed as an alternative to gutta percha, but its advantages over gutta percha remain controversial. In this study, we developed a novel zinc oxide/thermoplastic polyurethane (ZnO/TPU) composite root canal-filling material and a visible-light curable urethane-acrylate/tripropylene glycol diacrylate (UA/TPGDA) root canal sealer. The mechanical and thermal properties of the ZnO/TPU composite were compared with those of gutta percha and Resilon. Results showed that the tensile strength and elastic modulus of the ZnO/TPU composite were markedly higher than those of gutta percha and Resilon. The melting points of all three materials were similar; however, the enthalpy change and specific heat of ZnO/TPU (9.4 J/g, 0.7 J/g degrees C) were close to those of gutta percha (10.9 J/g, 0.7 J/g degrees C) but lower than those of Resilon (28.9 J/g, 1.3 J/g degrees C). The results indicate that ZnO/TPU composite exhibits better mechanical strength than Resilon, and its combination with UA/TPGDA sealer has excellent potential to be used as a root canal-filling material.

Radiographic assessment of skeletal maturation stages for orthodontic patients: hand-wrist bones or cervical vertebrae?

BACKGROUND/PURPOSE: The skeletal maturation status of a growing patient can influence the selection of orthodontic treatment procedures. Either lateral cephalometric or hand-wrist radiography can be used to assess skeletal development. In this study, we examined the correlation between the maturation stages of cervical vertebrae and hand-wrist bones in Taiwanese individuals. METHODS: The study group consisted of 330 male and 379 female subjects ranging in age from 8 to 18 years. A total of 709 hand-wrist and 709 lateral cephalometric radiographs were analyzed. Hand-wrist maturation stages were assessed using National Taiwan University Hospital Skeletal Maturation Index (NTUH-SMI). Cervical vertebral maturation stages were determined by the latest Cervical Vertebral Maturation Stage (CVMS) Index. Spearman's rank correlation was used to correlate the respective maturation stages assessed from the hand-wrist bones and the cervical vertebrae. RESULTS: The values of Spearman's rank correlation were 0.910 for males and 0.937 for females, respectively. These data confirmed a strong and significant correlation between CVMS and NTUH-SMI systems (p less than 0.001). After comparison of the mean ages of subjects in different stages of CVMS and NTU-SMI systems, we found that CVMS I corresponded to NTUH-SMI stages 1 and 2, CVMS II to NTUH-SMI stage 3, CVMS III to NTUHSMI stage 4, CVMS IV to NTUH-SMI stage 5, CVMS V to NTUH-SMI stages 6, 7 and 8, and CVMS VI to NTUH-SMI stage 9. CONCLUSION: Our results indicate that cervical vertebral maturation stages can be used to replace hand-wrist bone maturation stages for evaluation of skeletal maturity in Taiwanese individuals.

Relationship between age at menarche and skeletal maturation stages in Taiwanese female orthodontic patients.

BACKGROUND/PURPOSE: The age at menarche reflects a pubertal girl's physiologic maturity. The aims of this study were to evaluate the relationship between the age at menarche and skeletal maturation in female orthodontic patients. METHODS: Hand-wrist radiographs and lateral cephalometric radiographs from 304 adolescent female subjects (age, 8-18.9 years) were selected from the files of the Department of Orthodontics, National Taiwan University Hospital (NTUH). Hand-wrist bone maturation stages were assessed using the NTUH Skeletal Maturation Index (NTUH-SMI). Cervical vertebral maturation stages (CVMS) were determined using the latest CVMS Index. Menarcheal ages were self-reported by the patients and verified by the patients' mothers. The relationships between the NTUH-SMI or CVM stages and menarcheal status were investigated. RESULTS: More than 90% of the 148 subjects who had already attained menstruation had skeletal maturation beyond the NTUH-SMI stage four or CVMS III. However, the subjects who had never experienced menarche mostly had skeletal maturation before NTUH-SMI stage five or CVMS IV. During the period of orthodontic treatment, 19 females experienced their menarche. The mean age at menarche for the 167 female patients in total was 11.97 years. In average, menarche occurred between NTUH-SMI stages four and five or between CVM stages III and IV. The percentage of girls with menses increased from 1.2% at age 9 to 6.6% at age 10, 39.5% at age 11, 81.4% at age 12, 97% at age 13, and 100% at age 14. Compared with the results obtained 20 years previously, we found a downward shift of 0.47 years per decade for the mean age at menarche in female orthodontic patients. CONCLUSION: The majority of female orthodontic patients have passed the pubertal growth spurt when they experience their menarche. Menarche usually follows the pubertal growth spurt by about 1 year and occurs after NTUH-SMI stage four or CVMS III.

A method to transfer planned implant locations to a preorthodontic cast.

A technique is presented to transfer the orthodontic implant position from the diagnostic tooth arrangement onto the original cast. Plastic cast bases combined with a customized position plate are used to fabricate duplicates of the original dental casts. The position plate is customized with a transparent ruled grid trimmed and attached on its upper surface to allow easy transfer of the proposed implant position from the diagnostic arrangement to the original cast.