Morphological appearances and photo-controllable coloration of dye-doped cholesteric liquid crystal/polymer coaxial microfibers fabricated by coaxial electrospinning technique.

This study systematically investigates the morphological appearance of azo-chiral dye-doped cholesteric liquid crystal (DDCLC)/polymer coaxial microfibers obtained through the coaxial electrospinning technique and examines, for the first time, their photocontrollable reflection characteristics. Experimental results show that the quasi-continuous electrospun microfibers can be successfully fabricated at a high polymer concentration of 17.5 wt% and an optimum ratio of 2 for the feeding rates of sheath to core materials at 25 °C and a high humidity of 50% ± 2% in the spinning chamber. Furthermore, the optical controllability of the reflective features for the electrospun fibers is studied in detail by changing the concentration of the azo-chiral dopant in the core material, the UV irradiation intensity, and the core diameter of the fibers. Relevant mechanisms are addressed to explain the optical-control behaviors of the DDCLC coaxial fibers. Considering the results, optically controllable DDCLC coaxial microfibers present potential applications in UV microsensors and wearable smart textiles or swabs.

All-optical and polarization-independent spatial filter based on a vertically-aligned polymer-stabilized liquid crystal film with a photoconductive layer.

An all-optical and polarization-independent spatial filter was developed in a vertically-aligned (VA) polymer-stabilized liquid crystal (PSLC) film with a photoconductive (PC) layer. This spatial filter is based on the effect of light on the conductivity of PC layer: high (low)-intensity light makes the conductivity of the PC layer high (low), resulting in a low (high) threshold voltage of the PC-coated VA PSLC cell. Experimental results indicate that this spatial filter is a high-pass filter with low optical-power consumption (about 1.11 mW/cm(2)) in an optical Fourier transform system. The high-pass characteristic was confirmed by simulation. Accordingly, the all-optical and polarization-independent spatial filter can be used to enhance the edges of images.