Mussel Adhesion-Inspired Reverse Transfection Platform Enhances Osteogenic Differentiation and Bone Formation of Human Adipose-Derived Stem Cells.

Using small interfering RNA (siRNA) to regulate gene expression is an emerging strategy for stem cell manipulation to improve stem cell therapy. However, conventional methods of siRNA delivery into stem cells based on solution-mediated transfection are limited due to low transfection efficiency and insufficient duration of cell-siRNA contact during lengthy culturing protocols. To overcome these limitations, a bio-inspired polymer-mediated reverse transfection system is developed consisting of implantable poly(lactic-co-glycolic acid) (PLGA) scaffolds functionalized with siRNA-lipidoid nanoparticle (sLNP) complexes via polydopamine (pDA) coating. Immobilized sLNP complexes are stably maintained without any loss of siRNA on the pDA-coated scaffolds for 2 weeks, likely due to the formation of strong covalent bonds between amine groups of sLNP and catechol group of pDA. siRNA reverse transfection with the pDA-sLNP-PLGA system does not exhibit cytotoxicity and induces efficient silencing of an osteogenesis inhibitor gene in human adipose-derived stem cells (hADSCs), resulting in enhanced osteogenic differentiation of hADSCs. Finally, hADSCs osteogenically committed on the pDA-sLNP-PLGA scaffolds enhanced bone formation in a mouse model of critical-sized bone defect. Therefore, the bio-inspired reverse transfection system can provide an all-in-one platform for genetic modification, differentiation, and transplantation of stem cells, simultaneously enabling both stem cell manipulation and tissue engineering.

Materials from Mussel-Inspired Chemistry for Cell and Tissue Engineering Applications.

Current advances in biomaterial fabrication techniques have broadened their application in different realms of biomedical engineering, spanning from drug delivery to tissue engineering. The success of biomaterials depends highly on the ability to modulate cell and tissue responses, including cell adhesion, as well as induction of repair and immune processes. Thus, most recent approaches in the field have concentrated on functionalizing biomaterials with different biomolecules intended to evoke cell- and tissue-specific reactions. Marine mussels produce mussel adhesive proteins (MAPs), which help them strongly attach to different surfaces, even under wet conditions in the ocean. Inspired by mussel adhesiveness, scientists discovered that dopamine undergoes self-polymerization at alkaline conditions. This reaction provides a universal coating for metals, polymers, and ceramics, regardless of their chemical and physical properties. Furthermore, this polymerized layer is enriched with catechol groups that enable immobilization of primary amine or thiol-based biomolecules via a simple dipping process. Herein, this review explores the versatile surface modification techniques that have recently been exploited in tissue engineering and summarizes polydopamine polymerization mechanisms, coating process parameters, and effects on substrate properties. A brief discussion of polydopamine-based reactions in the context of engineering various tissue types, including bone, blood vessels, cartilage, nerves, and muscle, is also provided.

Bio-inspired, melanin-like nanoparticles as a highly efficient contrast agent for T1-weighted magnetic resonance imaging.

The development of nontoxic and biocompatible imaging agents will create new opportunities for potential applications in clinical MRI diagnosis. Synthetic melanin-like nanoparticles (MelNPs), analogous to natural sepia melanin (a major component of the cuttlefish ink), can be used as contrast agent for MRI. MelNPs complexed with paramagnetic Fe(3+) ions show much higher relaxivity values than existing MRI T1 contrast agents based on gadolinium (Gd) or manganese (Mn); MelNP values at 3T were r1 = 17 and r2 = 18 mM(-1) s(-1) (r2/r1 value of 1.1). With significant enhancement to MRI contrast, this biomimetic approach using MelNPs functionalized with paramagnetic Fe(3+) ions and surface-modified with biocompatible poly(ethylene glycol) units, could provide new insight into how melanin-based bioresponsive and therapeutic imaging probes integrate with their various biological functions.

Bioactive silica-based nanoparticles stimulate bone-forming osteoblasts, suppress bone-resorbing osteoclasts, and enhance bone mineral density in vivo.

Bone is a dynamic tissue that undergoes renewal throughout life in a process whereby osteoclasts resorb worn bone and osteoblasts synthesize new bone. Imbalances in bone turnover lead to bone loss and development of osteoporosis and ultimately fracture, a debilitating condition with high morbidity and mortality. Silica is a ubiquitous biocontaminant that is considered to have high biocompatibility. The authors report that silica nanoparticles (NPs) mediate potent inhibitory effects on osteoclasts and stimulatory effects on osteoblasts in vitro. The mechanism of bioactivity is a consequence of an intrinsic capacity to antagonize activation of NF-κB, a signal transduction pathway required for osteoclastic bone resorption but inhibitory to osteoblastic bone formation. We further demonstrate that silica NPs promote a significant enhancement of bone mineral density (BMD) in mice in vivo, providing a proof of principle for the potential application of silica NPs as a pharmacological agent to enhance BMD and protect against bone fracture.

Bioinspired polymerization of dopamine to generate melanin-like nanoparticles having an excellent free-radical-scavenging property.

Melanin-like nanoparticles were synthesized with size control through neutralization of dopamine hydrochloride with NaOH, followed by spontaneous air oxidation of dopamine. Although the particle characteristic of natural melanins was understood to be significantly affected by the biological and structural environment, melanin-lke nanoparticles can be realized through the chemical reactions only. Melanin-like nanoparticles that are <100 nm showed excellent dispersion stability in water as well as biological media and good biocompatibility to HeLa cells after the appropriate surface modification with thiol-terminated methoxy-poly(ethylene glycol) (mPEG-SH). Furthermore, the demonstrated ability of melanin-like nanoparticles to reduce 2,2-diphenyl-1-picrylhydrazyl (DPPH) suggests free radical scavenging activity of the material.

Evaluation of the anti-oxidative and ROS scavenging properties of biomaterials coated with epigallocatechin gallate for tissue engineering.

In tissue engineering, excessively generated reactive oxygen species (ROS) during biomaterial implantation or cell transplantation is a one of major causes of diminishing therapeutic effects. In this study, we prepared biomaterial surfaces coated with antioxidant epigallocatechin gallate (EGCG) and metal ions, and evaluated their anti-oxidative and ROS scavenging properties. We revealed that EGCG-coating on polycaprolactone (PCL) film surface increased hydrophilicity and anti-oxidative properties as a function of total phenol content (TPC) potentially due to the increase in phenolic -OH and π-electrons from structural maintenance and directly removed the hydrogen peroxide (H2O2) by resonance-stabilization. Furthermore, EGCG-coated PCL film increased attachment, spreading area, and viability of human adipose-derived stem cells (hADSCs) against H2O2 treatment while stimulated the cellular signaling to reduce apoptotic gene and enhance anti-oxidative enzyme expression. Further, we applied EGCG coating on the surface of poly-L-lactic acid (PLLA) fibers. Spheroids incorporating EGCG-coated PLLA fibers were able to maintain their shape and showed improved viability and anti-oxidative activities in response to H2O2-induced oxidative stress than control spheroids. Therefore, metal-phenolic network (MPN) coating of EGCG is a suitable method to impart the anti-oxidative properties to biomaterials by evaluating the structural properties and biological effects.

Stable biomimetic superhydrophobic surfaces fabricated by polymer replication method from hierarchically structured surfaces of Al templates.

We have developed a simple, efficient, and highly reproducible method to fabricate the large-area biomimetic superhydrophobic polymer surfaces having hierarchical structures of micrometer-sized irregular steps and nanometer-sized fibrils. Commercial Al plates (99.0%) were etched using Beck's dislocation etchant (mixture of HCl and HF) for different time periods in order to alter the structure of the etched Al surfaces from micrometer-sized to highly rough nanometer-sized irregular steps. These hierarchical structures could be easily replicated onto the surface of various thermoplastic polymer plates from the etched Al templates by applying heat and pressure; many polymer replicas without any significant deviations from each other could be duplicated from the same etched Al master templates. All of thermoplastic polymer replicas having hierarchical structures exhibited superhydrophobic properties with water contact angles of larger than 150 degrees. Especially, the surfaces of the high-density polyethylene (HDPE) replicas having nanometer-sized curled strands exhibited superhydrophobicity with a static water contact angle of approximately 160 degrees and a sliding angle of less than 2 degrees. These superhydrophobic HDPE replicas having nanometer-sized curled strands showed excellent stability after being exposed to various organic solvents and aqueous solutions of various pH.

Fabrication of triacetylcellulose-SiO2 nanocomposites by surface modification of silica nanoparticles.

We have successfully fabricated triacetylcellulose (TAC) polymer-silica nanocomposite films having up to 40 wt % of incorporated silica nanoparticles by deliberately designing a surface ligand that has a structure similar to that of polymer repeating units and effectively modifying the surface of silica nanoparticles through chemical bonding. Cross-sectional TEM analysis reveals no significant aggregation in all TAC-silica nanocomposite films. Thermal analysis results suggested that TAC-silica nanocomposites had higher T(g) and T(c) values as compared to pure TAC, and the increase in T(g) and T(c) was affected by the silica content. The transparency of all the nanocomposite films was over 80% in the visible range, confirming the excellent compatibility of nanoparticles with TAC. In this study, we enhance the interaction between nanoparticles and polymer matrices by modifying the surface of nanoparticles with a ligand that has a structure similar to that of polymer repeating units. It is expected that this method can be applied to other polymer systems to develop useful nanocomposites.

Polydopamine-assisted one-step modification of nanofiber surfaces with adenosine to tune the osteogenic differentiation of mesenchymal stem cells and the maturation of osteoclasts.

Adenosine and its receptors have emerged as alternative targets to control cellular functions for bone healing. However, the soluble delivery of adenosine has not proven effective because of its fast degradation in vivo. We therefore designed a stable coating of adenosine for biomaterial surfaces through polydopamine chemistry to control osteogenesis and osteoclastogenesis via A2bR signaling. First, we prepared electrospun poly (ι-lactic acid) (PLLA) nanofiber sheets, which were modified through a one-step adenosine polydopamine coating process. Scanning electron microscopy (SEM) revealed deposition of particles on the adenosine polydopamine-coated PLLA (AP-PL) sheets compared to the polydopamine-only sheets. Moreover, X-ray photoelectron spectroscopy analysis confirmed an increase in nitrogen signals due to adenosine. Furthermore, adenosine loading efficiency and retention were significantly enhanced in AP-PL sheets compared to polydopamine-only sheets. Human adipose-derived stem cells (hADSCs) cultured on AP-PL expressed A2bR (1.30 ± 0.19 fold) at significantly higher levels than those cultured on polydopamine-only sheets. This in turn significantly elevated the expression of Runx2 (16.94 ± 1.68 and 51.69 ± 0.07 fold), OPN (1.63 ± 0.16 and 30.56 ± 0.25 fold), OCN (1.16 ± 0.13 and 5.23 ± 0.16 fold), and OSX (10.01 ± 0.81 and 62.48 ± 0.25 fold) in cells grown in growth media on days 14 and 21, respectively. Similarly, mineral deposition was enhanced to a greater extent in the AP-PL group than the polydopamine group, while blocking of A2bR significantly downregulated osteogenesis. Finally, osteoclast differentiation of RAW 264.7 cells was significantly inhibited by growth on AP-PL sheets. However, osteoclast differentiation was significantly stimulated after A2bR was blocked. Taken together, we propose that polydopamine-assisted one-step coating of adenosine is a viable method for surface modification of biomaterials to control osteogenic differentiation of stem cells and bone healing.

Stem cell spheroids incorporating fibers coated with adenosine and polydopamine as a modular building blocks for bone tissue engineering.

Although stem cell spheroids offer great potential as functional building blocks for bottom-up bone tissue engineering, delivery of bioactive signals remain challenging. Here, we engineered adenosine-ligand-modified fiber fragments to create a 3D cell-instructive microenvironment for bone. Briefly, the Poly(ι-lactic acid) (PLLA) nanofiber sheet was partially degraded into fragmented fibers (FFs) through aminolysis and adenosine was stably incorporated via one-step polydopamine coating. The SEM and XPS analysis demonstrated that polydopamine assisted adenosine coating efficiency was significantly increased, which led to high coating efficiency of adenosine and its significant retention. The engineered fibers were then assembled into stable spheroids with human-adipose-derived stem cells (hADSCs). The adenosine in the spheroids effectively stimulated A2bR (1.768 ± 0.08) signaling, which further significantly induced the expression of osteogenic markers such as Runx2 (3.216 ± 0.25), OPN (4.136 ± 0.14), OCN (10.16 ± 0.34), and OSX (2.27 ± 0.11) with improved mineral deposition (1.375 ± 0.05 µg per spheroid). In contrast, the adipogenic differentiation of hADSCs was significantly suppressed within the engineered spheroids. Transplantation of engineered spheroids strongly induced osteogenic differentiation of hADSCs in ectopic subcutaneous tissue. Finally, the bone regeneration was significantly enhanced by implanting AP-FF group (59.97 ± 18.33%) as compared to P-FF (27.96 ± 11.14) and defect only (7.97 ± 3.76%). We propose that stem cell spheroids impregnated with engineered fibers enabling adenosine delivery could be promising building blocks for a bottom-up approach to create large tissues for regeneration of damaged bone.

Surface engineering of titanium alloy using metal-polyphenol network coating with magnesium ions for improved osseointegration.

Although titanium-based implants are widely used in orthopedic and dental clinics, improved osseointegration at the bone-implant interface is still required. In this study, we developed a titanium alloy (Ti-6Al-4V, Ti) coated with epigallocatechin gallate (EGCG) and magnesium ions (Mg2+) in a metal-polyphenol network (MPN) formation. Specifically, Ti discs were coated with EGCG in MgCl2 by controlling their concentrations and pH, with the amount of coating increasing with the coating time. An in vitro culture of human adipose-derived stem cells (hADSCs) on the EGCG-Mg2+-coated Ti showed significantly enhanced ALP activity and mRNA expression of osteogenic markers. In addition, the EGCG-Mg2+-coated Ti enhanced the mineralization of hADSCs, significantly increasing the calcium content (22.2 ± 5.0 µg) compared with cells grown on Ti (13.5 ± 0.3 µg). Treatment with 2-APB, an inhibitor of Mg2+ signaling, confirmed that the enhancement of osteogenic differentiation in the hADSCs was caused by the synergistic influence of EGCG and Mg2+. The EGCG-Mg2+ coating significantly reduced the osteoclastic maturation of Raw264.7 cells, reducing tartrate-resistant acid phosphatase activity (5.4 ± 0.4) compared with that of cells grown on Ti (1.0 ± 0.5). When we placed Ti implants onto rabbit tibias, the bone-implant contact (%) was greater on the EGCG-Mg2+-coated Ti implants (8.1 ± 4.3) than on the uncoated implants (4.4 ± 2.0). Therefore, our MPN coating could be a reliable surface modification for orthopedic implants to enable the delivery of an osteoinductive metal ion (Mg2+) with the synergistic benefits of a polyphenol (EGCG).

Current Advances in Immunomodulatory Biomaterials for Bone Regeneration.

Biomaterials with suitable surface modification strategies are contributing significantly to the rapid development of the field of bone tissue engineering. Despite these encouraging results, utilization of biomaterials is poorly translated to human clinical trials potentially due to lack of knowledge about the interaction between biomaterials and the body defense mechanism, the "immune system". The highly complex immune system involves the coordinated action of many immune cells that can produce various inflammatory and anti-inflammatory cytokines. Besides, bone fracture healing initiates with acute inflammation and may later transform to a regenerative or degenerative phase mainly due to the cross-talk between immune cells and other cells in the bone regeneration process. Among various immune cells, macrophages possess a significant role in the immune defense, where their polarization state plays a key role in the wound healing process. Growing evidence shows that the macrophage polarization state is highly sensitive to the biomaterial's physiochemical properties, and advances in biomaterial research now allow well controlled surface properties. This review provides an overview of biomaterial-mediated modulation of the immune response for regulating key bone regeneration events, such as osteogenesis, osteoclastogenesis, and inflammation, and it discusses how these strategies can be utilized for future bone tissue engineering applications.

Oxidative Epigallocatechin Gallate Coating on Polymeric Substrates for Bone Tissue Regeneration.

Plant derived flavonoids have not been well explored in tissue engineering applications due to difficulties in efficient formulations with biomaterials for controlled presentation. Here, the authors report that surface coating of epigallocatechin gallate (EGCG) on polymeric substrates including poly (L-lactic acid) (PLLA) nanofibers can be performed via oxidative polymerization of EGCG in the presence of cations, enabling regulation of biological functions of multiple cell types implicated in bone regeneration. EGCG coating on the PLLA nanofiber promotes osteogenic differentiation of adipose-derived stem cells (ADSCs) and is potent to suppress adipogenesis of ADSCs while significantly reduces osteoclastic maturation of murine macrophages. Moreover, EGCG coating serves as a protective layer for ADSCs against oxidative stress caused by hydrogen peroxide. Finally, the in vivo implantation of EGCG-coated nanofibers into a mouse calvarial defect model significantly promotes the bone regeneration (61.52 ± 28.10%) as compared to defect (17.48 ± 11.07%). Collectively, the results suggest that EGCG coating is a simple bioinspired surface modification of polymeric biomaterials and importantly can thus serve as a promising interface for tuning activities of multiple cell types associated with bone fracture healing.

Fabrication of in vitro 3D mineralized tissue by fusion of composite spheroids incorporating biomineral-coated nanofibers and human adipose-derived stem cells.

Development of a bone-like 3D microenvironment with stem cells has always been intriguing in bone tissue engineering. In this study, we fabricated composite spheroids by combining functionalized fibers and human adipose-derived stem cells (hADSCs), which were fused to form a 3D mineralized tissue construct. We prepared fragmented poly (ι-lactic acid) (PLLA) fibers approximately 100 µm long by partial aminolysis of electrospun fibrous mesh. PLLA fibers were then biomineralized with various concentrations of NaHCO3 (0.005, 0.01, and 0.04 M) to form mineralized fragmented fibers (mFF1, mFF2, and mFF3, respectively). SEM analysis showed that the minerals in mFF2 and mFF3 completely covered the fiber surface, and surface chemistry analysis confirmed the presence of hydroxyapatite peaks. Additionally, mFFs formed composite spheroids with hADSCs, demonstrating that the cells were strongly attached to mFFs and homogeneously distributed throughout the spheroid. In vitro culture of spheroids in the media without osteogenic supplements showed significantly enhanced expression of osteogenic genes including Runx2 (20.83 ±â€¯2.83 and 22.36 ±â€¯2.18 fold increase), OPN (14.24 ±â€¯1.71 and 15.076 ±â€¯1.38 fold increase), and OCN (4.36 ±â€¯0.41 and 5.63 ±â€¯0.51 fold increase) in mFF2 and mFF3, respectively, compared to the no mineral fiber group. In addition, mineral contents were significantly increased at day 7. Blocking the biomineral-mediated signaling by PSB 603 significantly down regulated the expression of these genes in mFF3 at day 7. Finally, we fused composite spheroids to form a mineralized 3D tissue construct, which maintained the viability of cells and showed pervasively distributed minerals within the structure. Our composite spheroids could be used as an alternative platform for the development of in vitro bone models, in vivo cell carriers, and as building blocks for bioprinting 3D bone tissue. STATEMENT OF SIGNIFICANCE: This manuscript described our recent work for the preparation of biomimeral-coated fibers that can be assembled with mesenchymal stem cells and provide bone-like environment for directed control over osteogenic differentiation. Biomineral coating onto synthetic, biodegradable single fibers was successfully carried out using multiple steps, combination of template protein coating inspired from mussel adhesion and charge-charge interactions between template proteins and mineral ions. The biomineral-coated single micro-scale fibers (1-2.5 µm in diameter) were then assembled with human adipose tissue derived stem cells (hADSCs). The assembled structure exhibited spheroidal architecture with few hundred micrometers. hADSCs within the spheroids were differentiated into osteogenic lineage in vitro and mineralized in the growth media. These spheroids were fused to form in vitro 3D mineralized tissue with larger size.

Dual delivery of growth factors with coacervate-coated poly(lactic-co-glycolic acid) nanofiber improves neovascularization in a mouse skin flap model.

Random skin flaps are commonly used in plastic and reconstructive surgery for patients suffering from severe or large scale wounds or in facial reconstruction. However, skin flaps are sometimes susceptible to partial or complete necrosis at the distal parts of the flaps due to insufficient blood perfusion in the defected area. In order to improve neovascularization in skin flaps, we developed an exogenous growth factor (GF) delivery platform comprised of coacervate-coated poly(lactic-co-glycolic acid) (PLGA) nanofibers. We used a coacervate that is a self-assembled complex of poly(ethylene argininyl aspartate diglyceride) (PEAD) polycation, heparin, and cargo GFs (i.e., vascular endothelial growth factor (VEGF) and/or transforming growth factor beta 3 (TGF-ß3)). The coacervate was coated onto a nanofibrous PLGA membrane for co-administration of dual GFs. In vitro proliferation of human dermal fibroblasts and endothelial tube formation using human umbilical vein endothelial cells indicated an enhanced bioactivity of released GFs when both VEGF and TGF-ß3 were incorporated into coacervate-coated PLGA nanofibers (Coa-Dual NFs). Moreover, an in vivo study using a mouse skin flap model demonstrated that implantation of Coa-Dual NF reduced necrosis and enhanced blood perfusion in skin flap areas after 10 days, as compared to any single GF-loaded coacervate/PLGA fiber (Coa-Single NF) along with direct administration of the other GF onto the defect site. Moreover, Coa-Dual NFs exhibited a well-composed skin appendage and a significantly higher number of blood vessels. Based upon these results, we conclude that Coa-Dual NFs may stimulate cellular activity by enhancing the bioactivity of the released GF, leading to a synergetic effect of dual GFs for reducing necrosis in the random skin flaps. Therefore, Coa-Dual NFs could be a valuable drug delivery platform for a variety of potential clinical applications for skin tissue regeneration applications.

Controlled Retention of BMP-2-Derived Peptide on Nanofibers Based on Mussel-Inspired Adhesion for Bone Formation.

Although bone morphogenetic protein-2 (BMP-2) has been frequently used to stimulate bone formation, it has several side effects to be addressed, including the difficulty in optimization of clinically relevant doses and unwanted induction of cancerous signaling processes. In this study, an osteogenic peptide (OP) derived from BMP-2 was investigated as a substitute for BMP-2. In vitro studies showed that OP was able to enhance the osteogenic differentiation and mineralization of human mesenchymal stem cells (hMSCs). The peptides were then conjugated onto biocompatible poly-ι-lactide electrospun nanofibers through polydopamine chemistry. Surface chemical analysis proved that more than 80% of the peptides were stably retained on the nanofiber surface after 8 h of polydopamine coating during at least 28 days, and the amount of peptides that was retained increased depending on the polydopamine coating time. For instance, about 65% of the peptides were retained on nanofibers after 4 h of polydopamine coating. Also, a relatively small dose of peptides could effectively induce bone formation in in vivo critical-sized defects on the calvarial bones of mice. More than 50.4% ± 16.9% of newly formed bone was filled within the defect after treatment with only 10.5 ± 0.6 µg of peptides. Moreover, these groups had similar elastic moduli and contact hardnesses with host bone. Taken together, our results suggest that polydopamine-mediated OP immobilized on nanofibers can modulate the retention of relatively short lengths of peptides, which might make this an effective therapeutic remedy to guide bone regeneration using a relatively small amount of peptides.

Toxicity and tissue distribution of magnetic nanoparticles in mice.

The development of technology enables the reduction of material size in science. The use of particle reduction in size from micro to nanoscale not only provides benefits to diverse scientific fields but also poses potential risks to humans and the environment. For the successful application of nanomaterials in bioscience, it is essential to understand the biological fate and potential toxicity of nanoparticles. The aim of this study was to evaluate the biological distribution as well as the potential toxicity of magnetic nanoparticles to enable their diverse applications in life science, such as drug development, protein detection, and gene delivery. We recently synthesized biocompatible silica-overcoated magnetic nanoparticles containing rhodamine B isothiocyanate (RITC) within a silica shell of controllable thickness [MNPs@SiO2(RITC)]. In this study, the MNPs@SiO2(RITC) with 50-nm thickness were used as a model nanomaterial. After intraperitoneal administration of MNPs@SiO2(RITC) for 4 weeks into mice, the nanoparticles were detected in the brain, indicating that such nanosized materials can penetrate blood-brain barrier (BBB) without disturbing its function or producing apparent toxicity. After a 4-week observation, MNPs@SiO2(RITC) was still present in various organs without causing apparent toxicity. Taken together, our results demonstrated that magnetic nanoparticles of 50-nm size did not cause apparent toxicity under the experimental conditions of this study.

Cellular uptake of magnetic nanoparticle is mediated through energy-dependent endocytosis in A549 cells.

Biocompatible silica-overcoated magnetic nanoparticles containing an organic fluorescence dye, rhodamine B isothiocyanate (RITC), within a silica shell [50 nm size, MNP@SiO2(RITC)s] were synthesized. For future application of the MNP@SiO2(RITC)s into diverse areas of research such as drug or gene delivery, bioimaging, and biosensors, detailed information of the cellular uptake process of the nanoparticles is essential. Thus, this study was performed to elucidate the precise mechanism by which the lung cancer cells uptake the magnetic nanoparticles. Lung cells were chosen for this study because inhalation is the most likely route of exposure and lung cancer cells were also found to uptake magnetic nanoparticles rapidly in preliminary experiments. The lung cells were pretreated with different metabolic inhibitors. Our results revealed that low temperature disturbed the uptake of magnetic nanoparticles into the cells. Metabolic inhibitors also prevented the delivery of the materials into cells. Use of TEM clearly demonstrated that uptake of the nanoparticles was mediated through endosomes. Taken together, our results demonstrate that magnetic nanoparticles can be internalized into the cells through an energy-dependent endosomal-lysosomal mechanism.

Enhancement of cancer specific delivery using ultrasound active bio-originated particles.

A hybrid multifunctional particle comprising of a microbbule (MB), liposome (Lipo), and an Fe ion chelated melanin nanoparticle (MNP(Fe)) was applied for ultrasound mediated cancer targeting as a theranostic agent.

Effective immobilization of BMP-2 mediated by polydopamine coating on biodegradable nanofibers for enhanced in vivo bone formation.

Although bone morphogenic proteins (BMPs) have been widely used for bone regeneration, the ideal delivery system with optimized dose and minimized side effects is still active area of research. In this study, we developed bone morphogenetic protein-2(BMP-2) immobilized poly(l-lactide) (PLLA) nanofibers inspired by polydopamine, which could be ultimately used as membranes for guided bone regeneration, and investigated their effect on guidance of in vitro cell behavior and in vivo bone formation. Surface chemical analysis of the nanofibers confirmed successful immobilization of BMP-2 mediated by polydopamine, and about 90% of BMP-2 was stably retained on the nanofiber surface for at least 28 days. The alkaline phosphatase activity and calcium mineralization of human mesenchymal stem cells (hMSCs) after 14 days of in vitro culture was significantly enhanced on nanofibers immobilized with BMP-2. More importantly, BMP-2 at a relatively small dose was highly active following implantation to the critical-sized defect in the cranium of mice; radiographic analysis demonstrated that 77.8 ± 11.7% of newly formed bone was filled within the defect for a BMP-2-immobilized groups at the concentration of 124 ± 9 ng/cm(2), as compared to 5.9 ± 1.0 and 34.1 ± 5.5% recovery, for a defect-only and a polydopamine-only group, respectively. Scanning and transmission electron microscopy of samples from the BMP-2 immobilized group showed fibroblasts and osteoblasts with nanofiber strands in the middle of regenerated bone tissue, revealing the importance of interaction between implanted nanofibers and the neighboring extracellular environment. Taken together, our data support that the presentation of BMP-2 on the surface of nanofibers as immobilized by utilizing polydopamine chemistry may be an effective method to direct bone growth at relatively low local concentration.