Comparison of Pentax Airway Scope and Macintosh laryngoscope for orotracheal intubation in children: A randomised non-inferiority trial.

BACKGROUND: Pentax Airway Scope (AWS) is a recently developed videolaryngoscope for use in both normal and difficult airways, yet its use in paediatric patients has not been established. The purpose of this study was to evaluate the efficacy of the Pentax AWS regarding intubation time, laryngeal view and ease of intubation in paediatric patients with normal airway, compared to Macintosh laryngoscope. METHOD: A total of 136 paediatric patients aged 1-10 with American Society of Anaesthesiologists physical status I or II undergoing general anaesthesia were randomly allocated into two groups: Macintosh laryngoscope (n = 68) and Pentax Airway Scope (n = 68). Primary outcome was intubation time. Cormack-Lehane laryngeal view grade, application of optimal laryngeal external manipulation, intubation difficulty scale, intubation failure rate and adverse events were also measured. RESULT: No significant difference was observed between the two groups regarding intubation time (P = 0.713). As for the laryngeal view grade, the Pentax group resulted in lower graded cases compared to the Macintosh group (P = 0.000). No optimal laryngeal external manipulation application was required in the Pentax group. Intubation difficulty scale resulted in lower values for Pentax group (P = 0.001). Failure rate was not different between the two groups (P = 0.619). There were significantly more teeth injury cases in the Pentax group than Macintosh group (P = 0.042). CONCLUSION: Pentax Airway Scope provided similar intubation time and success rate, while improving laryngeal view, compared to Macintosh laryngoscopy in children with normal airway. When using Pentax AWS in children, however, the risk of teeth injury may increase.

Synthesis and Characterization of ß-Tricalcium Phosphate Derived From Haliotis sp. Shells.

PURPOSE: To develop a methodology for the synthesis of ß-tricalcium phosphate (ß-TCP, Ca3(PO4)2) from the shell of Haliotis sp. (abalone shell) and to verify its characterization and biocompatibility. MATERIALS AND METHODS: Calcium oxide (CaO) was synthesized from abalone shell by sintering and was suspended in distilled water to prepare calcium hydroxide (Ca(OH)2). For the synthesis of calcium carbonate (CaCO3), carbon dioxide was used to infuse Ca(OH)2 at pH 7.4. CaCO3 was reacted with phosphoric acid at pH 6.0 to obtain dicalcium phosphate (CaHPO4). Subsequently, ß-TCP was synthesized by a chemical reaction between CaHPO4 and CaO at 950°C to 1100°C for 3 hours. Fourier transform infrared spectroscopy (FT-IR) and x-ray diffraction (XRD) was performed to verify the physiochemical characteristics of the composite synthesized from abalone shell. RESULTS: FT-IR and XRD results showed that ß-TCP was successfully synthesized from abalone shell. The synthesized ß-TCP did not affect cell viability of either normal human oral keratinocytes or osteoblastic MG-63 cells. These data indicate that ß-TCP synthesized from abalone shell is biologically safe. CONCLUSIONS: ß-TCP (Ca3(PO4)2) synthesized from abalone shell can be used as a potential source of bone grafting material.

McGrath Video Laryngoscopy Facilitates Routine Nasotracheal Intubation in Patients Undergoing Oral and Maxillofacial Surgery: A Comparison With Macintosh Laryngoscopy.

PURPOSE: The McGrath video laryngoscope (VL) offers excellent laryngoscopic views and increases the success rate of orotracheal intubation in patients with normal and difficult airways. The purpose of this randomized controlled trial was to compare the McGrath VL with the Macintosh laryngoscope to investigate the efficacy of the McGrath VL for routine nasotracheal intubation in patients with an expected normal airway. MATERIALS AND METHODS: To address the research purpose, the efficacy of the McGrath VL for routine nasotracheal intubation was compared with that of the Macintosh laryngoscope. The predictor variable was the laryngoscopic technique (McGrath VL vs Macintosh laryngoscope). The outcome variables were the time to successful intubation, laryngoscopic views before and after optimal external laryngeal manipulation (OELM), use of Magill forceps, ease of intubation, and severity of oropharyngeal bleeding. RESULTS: Data from 35 patients undergoing oral and maxillofacial surgery were assessed. The time to intubation was 10.5 seconds shorter in the McGrath group than in the Macintosh group (34.4 ± 13.7 vs 44.9 ± 15.6 seconds; P = .004). The incidence of grade 1 glottic view before OELM was higher in the McGrath group than in the Macintosh group (83 vs 57%; P = .019). The frequency of Magill forceps use was lower in the McGrath group than in the Macintosh group (6 vs 34%; P = .003). CONCLUSION: McGrath VL facilitates routine nasotracheal intubation in expected normal airways by providing a shorter intubation time and better laryngoscopic views compared with the Macintosh laryngoscope.

Enhanced attachment of human osteoblasts on NH3-treated poly(L-lactic acid) membranes for guided bone regeneration.

Barrier membranes for guided bone regeneration (GBR) were prepared by a solvent casting method using solutions of poly(L-lactic acid) (PLLA) and chitosan. PLLA and PLLA/chitosan membranes were treated with ammonia gas plasma. PLLA/chitosan membranes were successfully fabricated, and the surface of the PLLA/chitosan membrane was clearly modified by NH3 plasma treatment according to attenuated total reflectance (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) analyses. Additionally, water contact angle testing indicated that the hydrophilicity of these membranes was significantly increased. MG-63 cells were cultured on each type of membrane, and cell viability was examined using an MTT assay. After one week of culturing, MG-63 cells were more abundant on PLLA/chitosan membranes than on PLLA membranes. The cell viability of PLLA/chitosan membranes with plasma treatment was significantly higher than that of PLLA membranes. These results suggest that this plasma-treated membrane is suitable for GBR and is a promising source of bioactive membrane material for bone regeneration.

Development and structure of a novel barrier membrane composed of drug-loaded poly(lactic-co-glycolic acid) particles for guided bone regeneration.

A novel barrier membrane composed of poly(lactic-co-glycolic acid) particles loaded with dexamethasone (DEX) as a bioactive molecule was produced via a modified nanoprecipitation method without any mixing. The particle membranes had a bilayer structure: one side was smooth and had a compact surface that was connected to larger particles, while the opposite side was rough, porous and connected to smaller particles. Additionally, a cross-section of the particle membrane had a porous structure with nano and micro sized irregular pores. Process optimization revealed that NaCl concentration in the water phase, with acetone as solvent and water as a non-solvent, played critical roles in determining the properties of the particle membranes, such as DEX encapsulation efficiency, thickness and surface morphologies of the particle membranes. A novel barrier membrane containing DEX using polymer particle drug capture technology has been successfully developed.

Comparison of Temperature and Pain Changes between the Drip and Topical Methods of Administering the Transnasal Sphenopalatine Ganglion Block.

The objective of this study was to compare facial temperatures and the visual analogue scale (VAS) between the drip method and the topical method of transnasal sphenopalatine ganglion block (SPGB). The transnasal SPGB is administered to patients with facial or head and neck pain. In the transnasal approach, the drip and topical methods are frequently used. We compared facial temperatures and VAS after transnasal SPGB. Medical records of 74 patients who visited the pain clinic and underwent transnasal SPGB were retrospectively reviewed. A total of 156 transnasal SPGB were performed. The patients were divided into the drip-method and topical-method groups. Facial temperatures were measured in six areas of the right and left forehead, maxilla, and mandible before and 30 min after completion of the transnasal SPGB. Temperatures were compared before and 30 min after SPGB in each group and between the two groups. VAS scores were compared at the same times of SPGB in each group and between the two groups. In the drip-method group, there were significant increases at four areas of the face in temperature changes at 30 min after SPGB. In the topical-method group, there was no significant difference in the temperature changes at 30 min after SPGB. There were statistically significant differences in the facial temperature changes between the two groups in the right forehead (p = 0.001), left forehead (p = 0.015), and right maxillary area (p = 0.046). In herpes zoster, there were statistically significant differences in the VAS scores between before and 30 min after SPGB in both groups (p < 0.001, p = 0.008) and between two groups (p < 0.001). In migraine, there were statistically significant differences in VAS scores between before and 30 min after SPGB in both groups (p < 0.001, p = 0.004) and between two groups (p = 0.014). Transnasal SPGB using two methods showed different temperature changes and VAS scores.

Antibacterial Activity of Propolis-Embedded Zeolite Nanocomposites for Implant Application.

This study investigates the potential of propolis-embedded zeolite nanocomposites for dental implant application. Propolis-embedded zeolite nanocomposites were fabricated by complexation of propolis and zeolites. Then, they were pelleted with Poly(L-lactide) (PLA)/poly(ε-caprolactone) (PCL) polymer for the fabrication of a dental implant. The chemical properties of propolis were not changed during the fabrication of propolis-embedded zeolite nanocomposites in attenuated total reflection-fourier transform infra-red (ATR FT-IR) spectroscopy measurements. Propolis was continuously released from propolis-embedded zeolite nanocomposites over one month. PLA/PCL pellets containing propolis-embedded zeolite nanocomposites showed longer sustained release behavior compared to propolis-embedded zeolite nanocomposites. Propolis-embedded zeolite nanocomposite powder showed similar antibacterial activity against C. albicans in an agar plate and formed an inhibition zone as well as chlorohexidine (CHX) powder. Eluted propolis solution from PLA/PCL pellets also maintained antibacterial activity as well as CHX solution. Furthermore, eluted propolis solution from PLA/PCL pellets showed significant antibacterial efficacy against C. albicans, S. mutans and S. sobrinus. Dental implants fabricated from PLA/PCl polymer and propolis-embedded zeolite nanocomposites also have antibacterial efficacy and negligible cytotoxicity against normal cells. We suggest that PLA/PCl pellets containing propolis-embedded zeolite nanocomposites are promising candidates for dental implants.

Changes in facial temperature measured by digital infrared thermal imaging in patients after transnasal sphenopalatine ganglion block: Retrospective observational study.

Sphenopalatine ganglion block (SPGB) is a technique developed in the 1990s for the management of head and neck pain patients. Recently, transnasal sphenopalatine ganglion block (TN-SPGB) has been widely used for these patients; however, no objective methods exist for validating the success of TN-SPGB. In this study, we measured the changes in facial temperature before and 30 minutes after TN-SPGB by using digital infrared thermal imaging (DITI) to validate its success.The medical records of patients, who underwent TN-SPGB and facial DITI between January 2016 and December 2017, were reviewed. TN-SPGB and facial DITI were performed 36 times in 32 patients. The changes in facial temperatures measured at the forehead (V1), maxillary area (V2), and mandibular area (V3) by using DITI before and 30 minutes after TN-SPGB were recorded and compared. The temperatures on the ipsilateral and contralateral sides of these areas were also compared. The comparison between pain relief group and pain maintenance group was analyzed.After TN-SPGB, the temperature decreased significantly on both sides of V1 (P = .0208, 0.0181). No significant differences were observed between the ipsilateral and contralateral sides (P > .05). There was no correlation between changes in temperature and changes in pain score in the pain regions after the procedure (P > .05).The temperature decreased significantly in V1 area at 30 minutes after TN-SPGB compared with the temperature before TN-SPGB. Based on these results, we propose using DITI to measure temperature changes as an objective method for verifying the success of TN-SPGB.

Antimicrobial, Antioxidant and Cytotoxic Activities of Dendropanax morbifera Léveille extract for mouthwash and denture cleaning solution.

PURPOSE: The purpose of this study was to analyze the antimicrobial, antioxidant activity and cytotoxicity of Dendropanax morbifera Léveille extract for assessing whether Dendropanax morbifera Léveille can be used for the development of natural mouthwash and denture cleaning solution. MATERIALS AND METHODS: The extract was obtained from branches of Dendropanax morbifera Léveille. The solvent fractions were acquired by fractionating Dendropanax morbifera Léveille extract using n-hexane, ethyl acetate, chloroform and butanol solvent. Paper disc test was used to evaluate the antimicrobial and antifungal activity of Dendropanax morbifera Léveille extract and solvent fractions against Streptococcus mutans and Candida albicans. The analysis of antioxidant activity was carried out through DPPH radical scavenging assay. The cytotoxicity of Dendropanax morbifera Léveille extract was analyzed through MTT assay using normal human oral keratinocytes. RESULTS: Dendropanax morbifera Léveille extract showed antimicrobial activity against Streptococcus mutans and especially Candida albicans. The solvent fractions of Dendropanax morbifera Léveille showed strong antimicrobial activity against Streptococcus mutans and Candida albicans in n-hexane and butanol solvent fraction, respectively. Dendropanax morbifera Léveille extract also showed outstanding antioxidant activity. Butanol, ethyl acetate, and chloroform solvent fraction of Dendropanax morbifera Léveille tended to have increased antioxidant activity as the concentration increased. Dendropanax morbifera Léveille extract showed high cell survival rate in cytotoxicity test. CONCLUSION: Dendropanax morbifera Léveille extract turned out to have antimicrobial, antioxidant activity and cytophilicity. Based on these results, it is expected that Dendropanax morbifera Léveille is applicable as an ingredient for natural mouthwash and denture cleanser.

Effect of sex differences in remifentanil requirements for the insertion of a laryngeal mask airway during propofol anesthesia: A prospective randomized trial.

BACKGROUND: Remifentanil can improve insertion of a laryngeal mask airway (LMA) during induction with propofol. Recently, it has been suggested that there is a sex difference in opioid requirements for this procedure. The purposes of this study were to determine the effective effect-site concentration (Ce) of remifentanil for the facilitation of LMA insertion in male and female patients during propofol anesthesia without neuromuscular blockade and to evaluate whether there are sex differences in the Ce of remifentanil required for successful LMA insertion. METHODS: Forty-eight patients (24 male, 24 female) with American Society of Anesthesiologists physical status 1 or 2, aged 20 to 60 years, scheduled for minor orthopedic surgery under general anesthesia were enrolled. Anesthesia was induced by target-controlled infusion (TCI) of propofol and remifentanil. The target Ce of propofol was 5 µg/mL initially and was reduced to 3.5 µg/mL after loss of consciousness. The Ce of remifentanil given to each patient was determined by the response of the previously tested patient using 0.5 ng/mL as a step size. The 1st patient was tested at a Ce of 3.0 ng/mL of remifentanil. Successful LMA insertion was defined as smooth insertion without patient movement or significant resistance to mouth opening. RESULTS: The effective Ce of remifentanil required for successful LMA insertion on 50% of occasions (effective effect-site concentration for 50% [EC50]) as estimated by Dixon method was significantly lower in women (2.18 ±â€Š0.35 ng/mL) than in men (2.82 ±â€Š0.53 ng/mL) (P = 0.02). Using the isotonic regression method, the effective Ce of remifentanil required for successful LMA insertion on 95% of occasions (EC95) (95% confidence interval [CI]) was significantly lower in women (3.38 [3.0-3.48] ng/mL) than in men (3.94 [3.80-3.98] ng/mL). CONCLUSION: The Ce of remifentanil required to facilitate successful LMA insertion is higher during propofol induction by TCI in men than in women. When using remifentanil for LMA insertion, patient sex should be taken into account for appropriate dosing.

Biofilm Formation of Staphylococcus aureus on Various Surfaces and Their Resistance to Chlorine Sanitizer.

UNLABELLED: This study investigated the effect of material types (polystyrene, polypropylene, glass, and stainless steel) and glucose addition on Staphylococcus aureus biofilm formation, and the relationship between biofilm formation measured by crystal violet (CV) staining and the number of biofilm cells determined by cell counts was studied. We also evaluated the efficacy of chlorine sanitizer on inhibiting various different types of S. aureus biofilms on the surface of stainless steel. Levels of biofilm formation of S. aureus were higher on hydrophilic surfaces (glass and stainless steel) than on hydrophobic surfaces (polypropylene and polystyrene). With the exception of biofilm formed on glass, the addition of glucose in broth significantly increased the biofilm formation of S. aureus on all surfaces and for all tested strains (P ≤ 0.05). The number of biofilm cells was not correlated with the biomass of the biofilms determined using the CV staining method. The efficacy of chlorine sanitizer against biofilm of S. aureus was not significantly different depending on types of biofilm (P > 0.05). Therefore, further studies are needed in order to determine an accurate method quantifying levels of bacterial biofilm and to evaluate the resistance of bacterial biofilm on the material surface. PRACTICAL APPLICATION: Biofilm formation of Staphylococcus aureus on the surface was different depending on the surface characteristics and S. aureus strains. There was low correlation between crystal violet staining method and viable counts technique for measuring levels of biofilm formation of S. aureus on the surfaces. These results could provide helpful information for finding and understanding the quantification method and resistance of bacterial biofilm on the surface.

Osteogenic evaluation of collagen membrane containing drug-loaded polymeric microparticles in a rat calvarial defect model.

The aim of this study was to develop a functional collagen membrane that is treated with poly (lactic-co-glycolic acid) (PLGA) nanoparticles loaded with dexamethasone (DEX) as a bioactive molecule for guided bone regeneration (GBR). The DEX-loaded PLGA microparticles prepared using water-in-oil standard emulsion method were precoated with positively charged polyethylenimine molecules and later immobilized onto the surface of the collagen membrane; the microparticles were physically immobilized using counter charges of positively charged PLGA microparticles and the negatively charged collagen membrane surface. The release profile of DEX over a 4-week immersion study indicated an initial burst release followed by a sustained release. The performance of this system was investigated using rats with calvarial bone defects. The in vivo evaluation of the defects filled with membrane containing DEX-loaded PLGA microparticles indicated enhanced volume and quality of new bone formation compared with defects that were either unfilled or filled with membrane alone. This innovative platform for bioactive molecule delivery more potently induced osteogenesis, which may be exploited in implantable membranes for stem cell therapy or improved in vivo performance. In conclusion, this newly developed collagen membrane treated with drug-loaded PLGA microparticles might be applicable as a promising bone graft substitute for GBR.

Autogenous teeth used for bone grafting: a comparison with traditional grafting materials.

OBJECTIVES: This study evaluated the surface structures and physicochemical characteristics of a novel autogenous tooth bone graft material currently in clinical use. STUDY DESIGN: The material's surface structure was compared with a variety of other bone graft materials via scanning electron microscope (SEM). The crystalline structure of the autogenous tooth bone graft material from the crown (AutoBT crown) and root (AutoBT root), xenograft (BioOss), alloplastic material (MBCP), allograft (ICB), and autogenous mandibular cortical bone were compared using x-ray diffraction (XRD) analysis. The solubility of each material was measured with the Ca/P dissolution test. RESULTS: The results of the SEM analysis showed that the pattern associated with AutoBT was similar to that from autogenous cortical bones. In the XRD analysis, AutoBT root and allograft showed a low crystalline structure similar to that of autogenous cortical bones. In the CaP dissolution test, the amount of calcium and phosphorus dissolution in AutoBT was significant from the beginning, while displaying a pattern similar to that of autogenous cortical bones. CONCLUSIONS: In conclusion, autogenous tooth bone graft materials can be considered to have physicochemical characteristics similar to those of autogenous bones.

A comparative study of bone formation following grafting with different ratios of particle dentin and tricalcium phosphate combinations.

This study aimed to evaluate the bone regeneration relative to tooth powder and tricalcium phosphate (TCP) mixing ratios using the rabbit cranium defect model. The tooth powder was mixed with TCP in 1:1, 3:1, and 1:3 ratios, and the different ratios were implanted in the rabbit cranium defect for 4 and 8 weeks. Powders crystal structure evaluated using scanning electron microscopy (SEM), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), and new bone formation (NBF) was analyzed using micro-computed tomography (CT) and histologic examination. NBF in the control group was restricted to the defect margins. More NBF was observed around the defect margins in the experimental groups compared with the control group. Specifically, active NBF was identified around the implant materials of the centrifugal part of the defect and defect margins in the 3:1 tooth powder: TCP group. Our results suggested that tooth powder and TCP may be useful in bone regeneration.

Effect of platelet-rich plasma and platelet-rich fibrin on peri-implant bone defects in dogs.

The purpose of this study was to evaluate the effect of tooth ash and platelet-rich plasma (PRP), and platelet-rich fibrin (PRF) grafts into bone defects around implants on bone formation. Six adult dogs were used as experimental subjects. Graft materials were used to create a particulate material. Forty-eight tapered-type implants, 3.7 mm in diameter, 10 mm in length, and with surface treated with hydroxyapatite (HA) coating, were used as implant fixtures. Using a trephine bur, four bone defects were formed and implants were placed in the femurs of the adult dogs. Bone grafts were not performed in the control group. Tooth ash was grafted into the defects in group 1. In group 2, a mixture of tooth ash and PRP (1:1 ratio by volume) was grafted into the defects. In group 3, a mixture of tooth ash and PRF (ratio of 1:1) was grafted in the defect area. Animals were sacrificed after 4 or 8 weeks. Based on histopathological examination, the amount and rate of new bone formation were evaluated. Histomorphometric examination revealed that the rate of new bone formation in group 3 of the 4-week group was significantly higher than that in the control group. In addition, in the 8-week group, a significant increase in new bone formation was confirmed in group 3. In this study, a bone graft method using a mixture of tooth ash and PRF was found to increase new bone formation compared to the method using PRP. In addition, it was confirmed that this effect was more prominent in the initial stage of the bone graft.

Bacterial model system for screening and determining optimal concentration of anti-caries natural extracts.

In general, an antimicrobial test for screening anti-caries natural extracts was performed by measuring the minimum bactericidal concentration (MBC) against the type strains of mutans streptococci. However, it is unclear if the antimicrobial efficiency of natural extracts on the type strains of mutans streptococci is the same on the clinical strains. In this study, we introduced a bacterial model system for the screening of anti-caries and determining the optimal concentration of them to develop oral hygiene products for Korean populations.