Upcycling Plastic Waste into High Value-Added Carbonaceous Materials.

Even though plastic improved the human standard of living, handling the plastic waste represents an enormous challenge. It takes more than 100 years to decompose discarded or buried waste plastics. Microplastics are one of the causes of significantly pervasive environmental pollutants. The incineration of plastic waste generates toxic gases, underscoring the need for new approaches, in contrast to conventional strategies that are required for recycling plastic waste. Therefore, several studies have attempted to upcycle plastic waste into high value-added products. Converting plastic waste into carbonaceous materials is an excellent upcycling technique due to their diverse practical applications. This review summarizes various studies dealing with the upcycling of plastic waste into carbonaceous products. Further, this review discusses the applications of carbonaceous products synthesized from plastic waste including carbon fibers, absorbents for water purification, and electrodes for energy storage. Based on the findings, future directions for effective upcycling of plastic waste into carbonaceous materials are suggested.

Preparation of Protein-Peptide-Calcium Phosphate Composites for Controlled Protein Release.

Protein-peptide-calcium phosphate composites were developed for achieving sustainable and controlled protein release. Bovine serum albumin (BSA) as a model acidic protein was efficiently encapsulated with basic polypeptides such as polylysine and polyarginine during the precipitation of calcium phosphate (CaP). The prepared composites were fully characterized in terms of their morphologies, crystallinities, and the porosity of their structures, and from these analyses, it was observed that there are no significant differences between the composites. Scanning transmission electron microscopy and energy dispersive X-ray spectroscopy analysis indicated a homogeneous distribution of nitrogen and sulfur, confirming the uniform distribution of BSA and polypeptide in the CaP composite. In vitro release studies demonstrated that the composite prepared with the peptides α-polylysine and polyarginine were suitable for the gradual release of the protein BSA, while those containing ε-polylysine and no peptide were unsuitable for protein release. Additionally, these composites showed high hemocompatibility for mouse red blood cells, and the osteoblast-like cell proliferation and spread in media with the composites prepared using BSA and α-polylysine showed similar tendencies to medium with no composite. From these results, protein-peptide-CaP composites are expected to be useful as highly biocompatible protein delivery agents.

Effectiveness of Low-Level Laser Therapy with a 915 Nm Wavelength Diode Laser on the Healing of Intraoral Mucosal Wound: An Animal Study and a Double-Blind Randomized Clinical Trial.

Background and objectives: Diode laser has been the most popular low-level laser therapy (LLLT) technique in dentistry due to its good tissue penetration, lower financial costs, small size for portable application, and convenience to use. A series of recent studies with 940 nm or 980 nm lasers demonstrated that LLLT showed positive effects after third molar extraction or periodontal flap surgery. However, the effects of LLLT on intraoral mucosal wound healing after surgical incision have not yet been determined in human clinical study. Materials and Methods: The present study was performed to determine the efficacy and safety of 915 nm wavelength low-level laser therapy (LLLT) in mucosal wound healing. A total of 108 Sprague-Dawley rats were used. They were divided into three groups: Abrasive wound group, immediate LLLT once group, and daily LLLT group. As a clinical study, a total of 16 patients with split-mouth design subjected to bilateral mandibular third molar extraction were allocated into the LLLT group and placebo group. The process of LLLT was performed on postoperative days 0, 1, and 7, and parameters related to wound healing were analyzed on days 1, 7, and 14. Results: Repeated laser irradiation promoted mucosal wound healing of the rats. In the clinical study, although there were no significant statistical differences between the LLLT and placebo groups in all inflammatory parameters, the early stage mucosal healing tendency of wound dehiscence was higher in the LLLT group than in the placebo group clinically on postoperative day 1. Conclusions: The present results showed that 915 nm LLLT could be applied safely as an auxiliary therapy for mucosal wound healing.

Network formation in graphene oxide composites with surface grafted PNIPAM chains in aqueous solution characterized by rheological experiments.

Poly N-isopropyl acrylamide (PNI) radically polymerized in aqueous solution in the presence of graphene oxide (GO) can significantly change the properties of the resulting solution from a regular polymer solution to a soft solid with a GO content of only 0.176 wt% (3 wt% with respect to PNI). However, these properties require the presence of both grafting and supramolecular interactions between polymer chains and hydrophilic groups on GO (-OH, -COOH), proven by Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), X-ray diffraction and spectroscopy (XRD) and Raman spectra. While very low GO-contents (below 0.05 wt%) only lead to a labile structure, which can be disassembled by shear, higher contents yield composites with solid-like characteristics. This is clearly evident from the rheological behaviour, which changes significantly at a GO content around 0.15 wt%. Intensive shearing destroys the weak network, which cannot reform quickly at lower GO-concentrations, while at intermediate concentrations, restructuring is fast. GO-contents of 0.176 wt% lead to a material behaviour, which almost perfectly recovers from small deformations (creep and creep recovery compliance almost match) but larger deformations lead to permanent damage to the sample.

In situ synthesis of thermochemically reduced graphene oxide conducting nanocomposites.

Highly conductive reduced graphene oxide (GO) polymer nanocomposites are synthesized by a well-organized in situ thermochemical synthesis technique. The surface functionalization of GO was carried out with aryl diazonium salt including 4-iodoaniline to form phenyl functionalized GO (I-Ph-GO). The thermochemically developed reduced GO (R-I-Ph-GO) has five times higher electrical conductivity (42,000 S/m) than typical reduced GO (R-GO). We also demonstrate a R-I-Ph-GO/polyimide (PI) composites having more than 10(4) times higher conductivity (~1 S/m) compared to a R-GO/PI composites. The electrical resistances of PI composites with R-I-Ph-GO were dramatically dropped under ~3% tensile strain. The R-I-Ph-GO/PI composites with electrically sensitive response caused by mechanical strain are expected to have broad implications for nanoelectromechanical systems.

The Effectiveness of a Novel Air-Barrier Device for Aerosol Reduction in a Dental Environment: Computational Fluid Dynamics Simulation.

The use of equipment such as dental handpieces and ultrasonic tips in the dental environment has potentially heightened the generation and spread of aerosols, which are dispersant particles contaminated by etiological factors. Although numerous types of personal protective equipment have been used to lower contact with contaminants, they generally do not exhibit excellent removal rates and user-friendliness in tandem. To solve this problem, we developed a prototype of an air-barrier device that forms an air curtain as well as performs suction and evaluated the effect of this newly developed device through a simulation study and experiments. The air-barrier device derived the improved design for reducing bioaerosols through the simulation results. The experiments also demonstrated that air-barrier devices are effective in reducing bioaerosols generated at a distance in a dental environment. In conclusion, this study demonstrates that air-barrier devices in dental environments can play an effective role in reducing contaminating particles.

Development of orthophosphosilicate glass/poly(lactic acid) composite anisotropic scaffolds for simultaneous reconstruction of bone quality and quantity.

Reconstruction of organ-specific architecture is necessary to recover the original organ function. The anisotropic structure of bone tissue is strongly related to the collagen fibril alignment and bone apatite crystal direction. Bone regeneration indicates following two main process; first, restoration of bone mineral density (BMD; bone quantity), and second, restoring bone apatite c-axis orientation (bone quality). In addition to BMD, bone quality is the most important factor among bone mechanical properties. Recovery of the original bone function requires development of novel scaffolds with simultaneous reconstruction of bone quality and quantity. Herein, novel orthophosphosilicate glass (PSG)/poly(lactic acid) composite anisotropic scaffolds were developed to control cell alignment and enhance bone formation, which are important for the simultaneous reconstruction of bone quality and quantity. The strategy to control cell alignment and bone formation involved designing anisotropic scaffolds in combination with the release of therapeutic ions by PSGs. The morphology of fibrous scaffolds containing PSGs was quantitatively designed using electrospinning. This successfully modulated cell alignment and subsequent bone apatite c-axis orientation along the fiber-oriented direction. The released silicate and Mg2+ ions from PSGs in scaffolds improved cell adhesion, proliferation, and calcification. To best of our knowledge, this is the first report demonstrating that the anisotropic scaffolds containing bioactive glasses regenerate bone tissues with simultaneous reconstruction of bone quality and quantity via stimulating osteoblasts by inorganic ions and designing morphology of scaffolds.

Tantalum - Poly (L-lactic acid) nerve conduit for peripheral nerve regeneration.

Recently, Tantalum (Ta) has been re-explored and used with bone implants to promote bone regeneration. It has previously been extensively used as a nerve suture material; however, its use was abandoned because of the formation of scar tissue. In this study, we constructed a nerve conduit made of poly (L-lactic acid) PLA (outer layer) and tantalum Ta (inner layer) to evaluate its efficiency in the promotion of peripheral nerve regeneration. MATERIALS AND METHODS: First, we conducted an in vitro study to evaluate the viability and proliferation of Schwann cells and rat pheocromocytoma (PC-12) cells on Ta-PLA sheets using Enhanced Cell Viability Assay Kit (EZ-CYTOX). An in vivo study was then performed using Sprague Dawley rats that were randomly divided into the following three groups: sham, PLA, and Ta-PLA nerve conduits. The nerve conduit was placed over a 10-mm gap of the rat sciatic nerve to promote nerve regeneration. The rats were observed over 12 wk with weekly sciatic functional index functional assessment. At the end of 12 wk, the nerve regeneration outcome was assessed through dorsal root ganglions (DRG) retrograde neurons labeling, histomorphometric analysis, and histological analysis. RESULTS: The in vitro study showed significant viability and proliferation of Schwann cells in the Ta-PLA group than in the other groups. In the in vivo study, the gross findings revealed well-regenerated neural tissue in both the experimental groups with no scarring. The histological analysis showed that about 50 % of the conduits were filled with axons with a higher tendency for peripheral growth in the PLA group than for central growth within the Ta-PLA group conduits. The retrograde labeled neurons were significantly higher in Ta-PLA group than in the PLA group. Ta-PLA showed non-significant difference in the total fibers compared to the sham group. CONCLUSION: Tantalum proved favorable for the growth of Schwann cells.In vivo, Ta-PLA nerve conduit induced peripheral nerve regeneration without scar tissue formation.

Development of bifunctional oriented bioactive glass/poly(lactic acid) composite scaffolds to control osteoblast alignment and proliferation.

During the bone regeneration process, the anisotropic microstructure of bone tissue (bone quality) recovers much later than bone mass (bone quantity), resulting in severe mechanical dysfunction in the bone. Hence, restoration of bone microstructure in parallel with bone mass is necessary for ideal bone tissue regeneration; for this, development of advanced bifunctional biomaterials, which control both the quality and quantity in regenerated bone, is required. We developed novel oriented bioactive glass/poly(lactic acid) composite scaffolds by introducing an effective methodology for controlling cell alignment and proliferation, which play important roles for achieving bone anisotropy and bone mass, respectively. Our strategy is to manipulate the cell alignment and proliferation by the morphological control of the scaffolds in combination with controlled ion release from bioactive glasses. We quantitatively controlled the morphology of fibermats containing bioactive glasses by electrospinning, which successfully induced cell alignment along the fibermats. Also, the substitution of CaO in Bioglass®(45S5) with MgO and SrO improved osteoblast proliferation, indicating that dissolved Mg2+ and Sr2+ ions promoted cell adhesion and proliferation. Our results indicate that the fibermats developed in this work are candidates for the scaffolds to bone tissue regeneration that enable recovery of both bone quality and bone quantity. © 2019 The Authors. journal Of Biomedical Materials Research Part A Published By Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1031-1041, 2019.

Delay of cell growth and loss of stemness by inhibition of reverse transcription in human mesenchymal stem cells derived from dental tissue.

The present study investigated the cellular properties in the dental tissue-derived mesenchymal stem cells (DSCs) exposed to nevirapine (NVP), an inhibitor of reverse transcriptase (RTase). After a prolonged exposure of DSCs for 2 weeks, the population doubling time (PDT) was significantly (P < .05) increased by delayed cell growth in the DSCs treated with 250 and 500 µM NVP, compared with untreated DSCs. Furthermore, the G1 phase of cell cycle with high activity of senescence-associated ß-galactosidase was also significantly (P < .05) increased in the 250 µM NVP-treated DSCs, compared with untreated DSCs. The level of telomerase activity was unchanged between control and treatment. However, following the treatment of NVP, negative surface markers for mesenchymal stem cells (MSCs), such as CD34 and CD45, were significantly (P < .05) increased, while positive surface markers for MSCs, such as CD90 and CD105, were significantly (P < .05) decreased in the NVP-treated DSCs than those of untreated DSCs. Furthermore, the differentiation capacity into mesodermal lineage was gradually decreased, and a significant (P < .05) decrease of expression level of NANOG, OCT-4 and SOX-2 transcripts was observed in the DSCs treated with NVP, compared with untreated control DSCs. Taken together, the present results have revealed that inhibition of RTase by NVP induces delayed cell growth and loss of stemness.

Inhibition of cell growth by cellular differentiation into adipocyte-like cells in dexamethasone sensitive cancer cell lines.

The stress responses in human body lead to secretion of cortisol hormone. The present study investigated the cellular responses on cell growth and cellular differentiation into adipocytes by exposure of synthetic stress hormone, dexamethasone (DEX) in various human cancer and normal cells. After prolonged exposure of cells with 1 µg/ml DEX for 2 weeks, population doubling time (PDT) was significantly (P < .05) increased by inhibited cell growth in A-549 and MCF-7 cancer cells, and was unchanged in MDA-MB-231 cancer cells, normal MRC-5 fibroblasts, umbilical cord matrix-derived mesenchymal stem cells (UCMSCs) and dental papilla tissue-derived mesenchymal stem cells (DSCs). Whereas, PDT was significantly (P < .05) decreased in U87-MG cancer cells by increased cell growth. Glucose uptake was significantly (P < .05) increased in all the cancer cell lines compared to that in normal cell lines. Further, adiposome-like vesicles were noted in A-549 and MCF-7 cancer cells indicating retarded cell growth by DEX treatment, and the vesicles were stained with Oil-Red O solution. Further, the expression of adipocyte-specific genes such as glucose transporter type 4 (GLUT4), glucocorticoid receptors ß (GRß) and peroxisome proliferator-activated receptor γ (PPARγ) were significantly (P < .05) increased in A-549 and MCF-7 with lipid vesicles. The level of telomerase activity was found to be significantly (P < .05) downregulated in DEX-treated A-549 and MCF-7 cancer cells. Our results have clearly shown that DEX treatment induces inhibition of cell growth by differentiating into adipocyte-like cells in dexamethasone sensitive cancer cells.

Structure, dissolution behavior, cytocompatibility, and antibacterial activity of silver-containing calcium phosphate invert glasses.

Novel CaO-P2 O5 -Nb2 O5 -Ag2 O invert glasses with substitution Ag2 O for Nb2 O5 were successfully prepared using a melt-quenching method. Ag2 O in the glasses act as a network modifier oxide, playing the same role as Na2 O, which breaks the phosphate chains. Analysis of the ultraviolet-visible absorption spectra of the glasses showed that the glass matrix contained ionic silver species and silver nanoparticles. Approximately 0.05 mM of Nb5+ ions released from the glasses, which would be expected to stimulate osteoblast differentiation. A glass containing 1 mol % Ag2 O showed a linear increase in the releasing amount of Ag+ ions with increasing soaking time, whereas glasses containing 3-5 mol % Ag2 O showed Ag+ ion concentrations of around 13 µM at day 3, and then maintained similar values until day 7. When the solution was replaced with fresh solution every 2 days, the Ag+ ion dissolution amounts indicated almost constantly 13 µM due to AgCl formation. There were no differences in the numbers of primary osteoblast cells on silver-free and silver-containing glasses after cultivation for 1-7 days. The silver-containing calcium phosphate invert glasses showed cytocompatibility with simultaneous antibacterial activity to Escherichia coli and Staphylococcus aureus. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 3127-3135, 2017.

Preparation of orthophosphate glasses in the MgO-CaO-SiO2-Nb2O5-P2O5 system.

BACKGROUND: Niobia/magnesia-containing orthophosphate invert glasses were successfully prepared in our earlier work. Orthophosphate groups in the glasses were cross-linked by tetrahedral niobia (NbO4) and magnesia. OBJECTIVE: The aim of this work is to prepare calcium orthophosphate invert glasses containing magnesia and niobia, incorporating silica, and to evaluate their structures and releasing behaviors. METHOD: The glasses were prepared by melt-quenching, and their structures and ion-releasing behaviors were evaluated. RESULTS: 31P solid-state nuclear magnetic resonance (NMR) and Raman spectroscopies showed the glasses consist of orthophosphate (PO4), orthosilicate (SiO4), and NbO4 tetrahedra. NbO4 and MgO in the glasses act as network formers. By incorporating SiO2 into the glasses, the chemical durability of the glasses was slightly improved. The glasses reheated at 800°C formed the orthophosphate crystalline phases, such as ß-Ca3(PO4)2, Mg3(PO4)2 and Mg3Ca3(PO4)4 in the glasses. The chemical durability of the crystallized glasses was slightly improved. CONCLUSIONS: Orthosilicate groups and NbO4 in the glasses coordinated with each other to form Si-O-Nb bonds. The chemical durability of the glasses was slightly improved by addition of SiO2, since the field strength of Si is larger than that of Ca or Mg.

Biothermal sensing of a torsional artificial muscle.

Biomolecule responsive materials have been studied intensively for use in biomedical applications as smart systems because of their unique property of responding to specific biomolecules under mild conditions. However, these materials have some challenging drawbacks that limit further practical application, including their speed of response and mechanical properties, because most are based on hydrogels. Here, we present a fast, mechanically robust biscrolled twist-spun carbon nanotube yarn as a torsional artificial muscle through entrapping an enzyme linked to a thermally sensitive hydrogel, poly(N-isopropylacrylamide), utilizing the exothermic catalytic reaction of the enzyme. The induced rotation reached an equilibrated angle in less than 2 min under mild temperature conditions (25-37 °C) while maintaining the mechanical properties originating from the carbon nanotubes. This biothermal sensing of a torsional artificial muscle offers a versatile platform for the recognition of various types of biomolecules by replacing the enzyme, because an exothermic reaction is a general property accompanying a biochemical transformation.

Strengthened PAN-based carbon fibers obtained by slow heating rate carbonization.

Large efforts have been made over the last 40 years to increase the mechanical strength of polyacrylonitrile (PAN)-based carbon fibers (CFs) using a variety of chemical or physical protocols. In this paper, we report a new method to increase CFs mechanical strength using a slow heating rate during the carbonization process. This new approach increases both the carbon sp(3) bonding and the number of nitrogen atoms with quaternary bonding in the hexagonal carbon network. Theoretical calculations support a crosslinking model promoted by the interstitial carbon atoms located in the graphitic interlayer spaces. The improvement in mechanical performance by a controlled crosslinking between the carbon hexagonal layers of the PAN based CFs is a new concept that can contribute further in the tailoring of CFs performance based on the understanding of their microstructure down to the atomic scale.

Fluoride coatings on orthodontic wire for controlled release of fluorine ion.

The purpose of this study was to develop a new method of releasing fluorine in a controlled manner for applications in the field of orthodontic Ti-based wire, namely the coating of fluorides on Ti. Thin films of two fluoride compounds, CaF(2) and MgF(2), were coated on Ti via the electron-beam evaporation method. The fluorine was released rapidly from the as-deposited MgF(2) coating within a short period(,) and then the release rate slowed down. When the MgF(2) coating was heat treated, this initial burst effect was decreased, but a significant amount of cracks were generated. On the other hand, in the case of the as-deposited CaF(2) coating, fluorine was released linearly for the entire period, without an initial burst. In the heat-treated CaF(2) coatings the trend was similarly observed. The linear fluorine release from the CaF(2) coatings, even in the as-deposited state, was attributed to the high degree of crystallinity of the coatings. A preliminary cell test showed favorable cell viability on both the fluoride coatings. Given their sustained and controlled fluorine release, these fluoride coatings, particularly CaF(2), are suggested to be potentially useful in the field of orthodontic Ti-based wire.

One-step synthesis of carbon nanosheets converted from a polycyclic compound and their direct use as transparent electrodes of ITO-free organic solar cells.

Through a catalyst- and transfer-free process, we fabricated indium tin oxide (ITO)-free organic solar cells (OSCs) using a carbon nanosheet (CNS) with properties similar to graphene. The morphological and electrical properties of the CNS derived from a polymer of intrinsic microporosity-1 (PIM-1), which is mainly composed of several aromatic hydrocarbons and cycloalkanes, can be easily controlled by adjusting the polymer concentration. The CNSs, which are prepared by simple spin-coating and heat-treatment on a quartz substrate, are directly used as the electrodes of ITO-free OSCs, showing a high efficiency of approximately 1.922% under 100 mW cm(-2) illumination and air mass 1.5 G conditions. This catalyst- and transfer-free approach is highly desirable for electrodes in organic electronics.

Evaluation of a canine small intestinal submucosal xenograft and polypropylene mesh as bioscaffolds in an abdominal full-thickness resection model of growing rats.

We evaluated the biological scaffold properties of canine small intestinal submucosa (SIS) compared to a those of polypropylene mesh in growing rats with full-thickness abdominal defects. SIS is used to repair musculoskeletal tissue while promoting cell migration and supporting tissue regeneration. Polypropylene mesh is a non-resorbable synthetic material that can endure mechanical tension. Canine SIS was obtained from donor German shepherds, and its porous collagen fiber structure was identified using scanning electron microscopy (SEM). A 2.50-cm(2) section of canine SIS (SIS group) or mesh (mesh group) was implanted in Sprague-Dawley rats. At 1, 2, 4, 12, and 24 weeks after surgery, the implants were histopathologically examined and tensile load was tested. One month after surgery, CD68+ macrophage numbers in the SIS group were increased, but the number of CD8+ T cells in this group declined more rapidly than that in rats treated with the mesh. In the SIS group, few adhesions and well-developed autologous abdominal muscle infiltration into the SIS collagen fibers were observed. No significant differences in the tensile load test results were found between the SIS and mesh groups at 24 weeks. Canine SIS may therefore be a suitable replacement for artificial biological scaffolds in small animals.

Preliminary study for a newly designed silicone stent and delivery system for canine obstructive tracheal disease.

The goal of this study was to prove the possibility of using silicone stents broadly used for human medicine in canine obstructive tracheal disease. A silicone stent anatomically designed for canine trachea was tested on 5 beagle dogs for 8 weeks. The stent was carefully inserted using a newly developed delivery device under fluoroscopic guidance. There were no technical difficulties in placing the stent during the procedure. Previously reported complications of airway stenting such as stent migration or granulation tissue formation did not occur in any of the cases. In addition, removal of the stent was as simple as inserting it, and complications were absent. The stent introduced in this study could possibly be applied to various canine obstructive tracheal diseases.

Selenium improves the developmental ability and reduces the apoptosis in porcine parthenotes.

Selenium is an essential trace element in conventional tissue culture media to guarantee adequate biosynthesis of selenoprotein in cellular antioxidant system to protect the cells from oxidative damage and apoptosis. This study investigated the effect of selenium, in the form of sodium selenite (SS), on developmental ability and quality of in vitro produced porcine parthenotes. For this, parthenogenetic presumptive diploid zygotes were produced by electroactivation and cultured in the absence or presence of SS at different concentrations (0, 2.5, 25, 250 ng/ml) in a serum-free defined culture medium supplemented with polyvinyl alcohol (PVA) or bovine serum albumin (BSA). Results showed that, development rate of 2-4 cell stage parthenotes to blastocyst and their cell number was increased while TUNEL index was decreased, in a dose-dependent manner, when SS was supplemented to NCSU23 + PVA. Interestingly, the blastocyst rate and their quality approached to those cultured in NCSU23 + BSA (P < 0.05), thereby suggesting PVA + 25 ng/ml SS to be a partial replacement of BSA. In the presence of PVA, supplementation of SS at a concentration of 25 ng/ml did not improve the cleavage rate of in vitro matured oocytes but there was significant improvement in the blastocyst rate (45.4 +/- 8.8% vs. 12.7 +/- 4.8%), total nuclei number (42.1 +/- 3.5 vs. 31.3 +/- 2.9) and inner cell mass (ICM) rate (29.4 +/- 1.5% vs. 21.3 +/- 1.2%) and decrease in TUNEL index (5.6 +/- 0.5 vs. 12.9 +/- 1.3) compared to nonsupplemented controls. The SS supplementation also decreased the BAX:BCL-xL transcript ratio, increased the expression of ERK1/2 and glutathione peroxidase (GPX) and reduced the level of Caspase 3 proteins (P < 0.05). These data thus suggest that SS improves the development rate and quality of porcine parthenotes by preventing oxidative damage and apoptosis.