Porphyromonas gingivalis predicts local recurrence after endoscopic submucosal dissection of early esophageal squamous cell carcinoma or precancerous lesion.

BACKGROUND: Porphyromonas gingivalis plays an oncogenic role in development and progression of esophageal squamous cell carcinoma (ESCC). However, the impact of P. gingivalis on local recurrence of early ESCC or precancerous lesion after ESD treatment remains unknown. The present study aimed to evaluate the impact of P. gingivalis on local recurrence after ESD treatment of early ESCC or high-grade dysplasia (HGD). METHODS: The amount of P. gingivalis was assessed by immunohistochemistry in 205 patients with early ESCC or HGD. Univariate and multivariate Cox regression analyses were performed to determine the effect of P. gingivalis on local recurrence. Propensity score matching analysis was performed to reduce the imbalance of baseline characteristics. A nomogram integrating significant prognostic factors was built for local recurrence prediction. RESULTS: The amount of P. gingivalis increased significantly in neoplasms that invaded up to muscularis mucosa and submucosa compared with lesions confined to epithelium or lamina propria. Overabundance of P. gingivalis was positively associated with invasion depth, post-ESD stricture and local recurrence. Univariate and multivariate Cox regression analyses revealed that P. gingivalis, longitudinal length of lesion and lymphovascular invasion were independent predictors for post-ESD recurrence. A nomogram comprising P. gingivalis, lymphovascular involvement, and lesion length performed well for prediction of post-ESD local recurrence with the concordance indices of 0.72 (95%CI, 0.62 to 0.80), 0.72 (95%CI, 0.63 to 0.80), and 0.74 (95%CI, 0.65 to 0.83) in the validation cohort, the entire cohort, and the subcohort after PSM, respectively. CONCLUSION: P. gingivalis overabundance is a risk factor and a potential predictor for local recurrence of early ESCC or HGD after ESD treatment. Thus, clearance of P. gingivalis represents an attractive strategy for prognosis improvement and for prevention of ESCC.

Exosome-based engineering strategies for the diagnosis and treatment of oral and maxillofacial diseases.

Oral and maxillofacial diseases are one of the most prevalent diseases in the world, which not only seriously affect the health of patients' oral and maxillofacial tissues, but also bring serious economic and psychological burdens to patients. Therefore, oral and maxillofacial diseases require effective treatment. Traditional treatments have limited effects. In recent years, nature exosomes have attracted increasing attention due to their ability to diagnose and treat diseases. However, the application of nature exosomes is limited due to low yield, high impurities, lack of targeting, and high cost. Engineered exosomes can be endowed with better comprehensive therapeutic properties by modifying exosomes of parent cells or directly modifying exosomes, and biomaterial loading exosomes. Compared with natural exosomes, these engineered exosomes can achieve more effective diagnosis and treatment of oral and maxillary system diseases, and provide reference and guidance for clinical application. This paper reviews the engineering modification methods of exosomes and the application of engineered exosomes in oral and maxillofacial diseases and looks forward to future research directions.

The mechanism of enhanced lignin regulating foliar Cd absorption and yield in rice (Oryza sativa L.).

The impact of atmospheric deposition of cadmium (Cd) in cereal crops has become a global concern. Enhanced lignin content was expected to benefit the plant performance against Cd exposure. To date, however, the underlying mechanisms of lignin regulating foliar Cd absorption in rice (Oryza sativa L.) and its effect on grain yield remains unclear. In present study, the effect and mechanism of rice in response to leaf Cd exposure were investigated using 113Cd stable isotope and a lignin-increased rice mutant. The highest Cd uptake efficiency and uptake amount was observed in wild type (WT) plant grown in the maturity period, which were 3-fold higher than in mutant plant. Compared to WT, the mutant exhibited 14.75% and 25.43% higher contents in G- and S-unit of lignin monomers. Lignin biosynthesis and polymerization related genes (OsPAL/OsCOMT/Os4CL3/OsLAC5/OsLAC15) were significantly up-regulated in mutants. In addition, the enzyme activities involved in the above process were also significantly increased by 1.24-1.49-fold. The increased Cd retention in cell wall and decreased gene expression levels of OsNRAMP5, OsHMA3 and OsIRT1 in mutant indicated that lignin effectively inhibited Cd transportion in plant tissues. Moreover, the antioxidant capacity and photosynthesis efficiency in mutant plant were obviously improved, leading to higher Cd tolerance and increased grain yield. Our results revealed the molecular and physiological mechanisms of enhanced lignin regulating foliar Cd absorption and yield in rice, and provided the valuable rice genotype to ensure food safety.

Effect of low-level laser therapy on orthodontic dental alignment: a systematic review and meta-analysis.

The aim of this study is to systematically summarize the available evidence regarding low-level laser therapy (LLLT) speed-up effect on dental alignment in comprehensive orthodontic treatment. An extensive electronic search was conducted in PubMed, ScienceDirect, Cochrane, Web of Science, and Scopus up to February 20, 2023. The Cochrane risk of bias tool and the Newcastle-Ottawa Quality Assessment Form were used by two authors independently to assess the risk of bias (RoB). Statistical analysis was performed by Review Manager 5.3. The eight eligible trials were reviewed and included in qualitative synthesis. Four studies reported the overall time of leveling and alignment (OLAT, days), enabling a synthesizing of the data. The meta-analysis results showed that LLLT significantly reduced the overall time of leveling and alignment compared to control group (MD=-30.36, 95% CI range -41.50 to -19.22, P<0.0001), with moderate heterogeneity (χ2=4.10, P=0.25, I2=27%). Based on the data available, statistically significant evidence with moderate risk of bias suggests that LLLT may have a positive effect on accelerating dental alignment. However, due to the differences in intervention strategy and evaluating method, the conclusions should be interpreted with caution.

Analysis of the Development Trend in Forensic Odontology Based on CiteSpace.

OBJECTIVES: To realize the dynamic visualization of forensic odontology based on the bibliometrics methods, and capture the research hotspots and identify the future development trend. METHODS: Literature articles published from January 1995 to December 2020 were searched according to specific subject words in the core data set of Web of Science. The visualization analysis of publishing country, institution, discipline, author, co-cited journal and keywords was performed by CiteSpace 5.7.R5W software. RESULTS: The annual analysis of publications showed an upward trend of forensic odontology research literature year by year, with the number of annual publications more than 110 in the last five years. Developed countries were the main source of contributions and the average centrality was greater than 0.2. The research of forensic odontology involved multiple disciplines, including stomatology, biology, computer science and medical imaging, with a distinct interdisciplinary feature. A total of 115 nodes were obtained by keyword cluster analysis. The principal line of forensic odontology mainly included individual identification and age estimation and the emergence of hotspots was closely related to new technologies. Population-based odontology investigation, improvement of traditional dental age estimation method and dental age estimation based on new technology were popular research in forensic odontology. CONCLUSIONS: Developing countries urgently need to increase the focus on related research. It may be an important direction for the development of forensic odontology to establish and enrich the regional dental database, develop new odontology identification technology combined with frontier and high-end technology, and develop the identification program based on advanced information technology.

Loose Pre-Cross-Linking Mediating Cellulose Self-Assembly for 3D Printing Strong and Tough Biomimetic Scaffolds.

The lack of an effective printable ink preparation method and the usual mechanically weak performance obstruct the functional 3D printing hydrogel exploitation and application. Herein, we propose a gentle pre-cross-linking strategy to enable a loosely cross-linked cellulose network for simultaneously achieving favorable printability and a strong hydrogel network via mediating the cellulose self-assembly. A small amount of epichlorohydrin is applied to (i) slightly pre-cross-link the cellulose chains for forming the percolating network to regulate the rheological properties and (ii) form the loosely cross-linked points to mediate the cellulose chains' self-assembly for achieving superior mechanical properties. The fabrication of the complex 3D structures verifies the design flexibility. The printed cellulose hydrogels exhibit a biomimetic nanofibrous topology, remarkable tensile and compressive strength (5.22 and 11.80 MPa), as well as toughness (1.81 and 2.16 MJ/m3). As a demonstration, a bilayer scaffold (mimicking the osteochondral structure) consisting of a top pristine cellulose and a bottom cellulose/bioactive glass hydrogel is printed and exhibits superior osteochondral defect repair performance, showing a potential in tissue engineering. We anticipate that our loose pre-cross-linking 3D printing ink preparation concept can inspire the development of other polymeric inks and strong 3D printing functional hydrogels, eventually spreading the applications in diverse fields.

Amplified electrochemical antibiotic aptasensing based on electrochemically deposited AuNPs coordinated with PEI-functionalized Fe-based metal-organic framework.

A facile and versatile competitive electrochemical aptasensor for tobramycin (TOB) detection is described using electrochemical-deposited AuNPs coordinated with PEI-functionalized Fe-based metal-organic framework (AuNPs/P-MOF) as signal-amplification platform and a DNA probe labeled with methylene blue (MB) at the 3'-end (MB-Probe) as a signal producer. First, F-Probe (short complementary DNA strands of both the aptamer and the MB-Probe label with a sulfhydryl group at the 5'-end) was immobilized on the AuNPs/P-MOF modified electrode as detection probes, which competed with TOB in binding to the aptamer. TOB-aptamer binding resulted in F-Probe remaining unhybridized on the electrode surface, so that a significant current response was generated by hybridizing with MB-Probe instead. The developed strategy showed favorable repeatability, with a relative standard deviation (RSD) of 4.3% computed over five independent assays, and high stability, with only 6.8% degradation after 15 days of storage. Under optimal conditions, the proposed aptamer strategy exhibited a linear detection range from 100 pM to 500 nM with a limit of detection (LOD) of 56 pM (S/N = 3). The electrochemical aptasensor demonstrated remarkable selectivity, and its feasibility for accurate and quantitative detection of TOB in milk samples was confirmed (RSD < 4.5%). Due to its simple design, easy operation, and high sensitivity and selectivity, the proposed method could expect to detect other antibiotics by replacing the aptamers. In summary, this study provides a simple and effective new strategy for electrochemical aptasening based on MOF-based sensing interface. Scheme illustration of label-free competitive electrochemical aptamer-based detection of tobramycin based on electrochemically deposited AuNPs coordinated with PEI-functionalized Fe-based metal-organic framework as signal-amplification platform.

Addition of glyceryl monostearate affects the crystallization behavior and polymorphism of palm stearin.

Low crystallization-rate and formation of crystalline clusters makes palm stearin unpopular in fat-based products especially in their post-processing stage. Addition of emulsifiers is commonly used to overcome these drawbacks, since they are believed to induce or stabilize specific polymorphs of palm stearin. Glyceryl monostearate (GMS) was applied in palm stearin (1%, 2%, and 4% w/w) in this study, and the mechanisms on crystallization of palm stearin were investigated by means of differential scanning calorimetry (DSC), X-ray diffraction (XRD), and polarized light microscopic (PLM) method. Data showed that GMS prompted the isothermal crystallization (15-30 °C) in a dose-dependent manner. Crystallization turned to low super-cooling sporadic nucleation at 30 °C. Besides, GMS led to an earlier onset of crystallization during cooling. GMS-palm stearin blends crystallized to form α polymorphs at first and subsequently underwent polymorphic transition to become ß' polymorphs. Addition of 4% w/w GMS in palm stearin significantly decreased the size of crystals, which is helpful to reduce the grainy mouth feel of fat products in practice.

Recent advances in microencapsulation of drugs for veterinary applications.

Microencapsulation is a process where very minute droplets or particles of solid or liquid or gas are trapped with a polymer to isolate the internal core material from external environmental hazards. Microencapsulation is applied mostly for flavor masking, fortification, and sustained and control release. It improves palatability, absorption, and bioavailability of drugs with good conformity. Microencapsulation has been widely studied in numerous drug delivery systems for human health. The application of microcapsules in the veterinary pharmaceutical sciences is increasing day by day. The treatment systems for humans and animals are likely to be similar, but more complex in the veterinary field due to the diversity of the species, breeds, body size, biotransformation rate, and other factors associated with animal physiology. Commercially viable, economically profitable, and therapeutically effective microencapsulated vaccine, anthelmintic, antibacterial, and other therapeutics have a great demand for livestock and poultry production. Nowadays, researchers emphasize the controlled and sustained-release dosage form of drugs in the veterinary field. This paper has highlighted the microencapsulation materials, preparation techniques, characteristics, roles, and the application of microcapsules in veterinary medicine.

Stress-driven dynamic regulation of multiple tolerance genes improves robustness and productive capacity of Saccharomyces cerevisiae in industrial lignocellulose fermentation.

Yeast productivity in lignocellulosic ethanol fermentation is clearly impeded by stress. Enhancing the robustness of xylose-fermenting yeast is important for improving lignocellulosic ethanol production. In this study, the glutathione biosynthesis pathway and acetic acid degradation pathway were strengthened to enhance yeast tolerance to stress due to elevated reactive oxygen species (ROS) and acetic acid. Dynamic feedback regulation of the anti-stress genetic circuits was achieved using stress-driven promoters discovered from the transcriptome to maintain low intracellular ROS, relieve the metabolic burden, and ultimately improve the robustness and ethanol production of yeast. The cell growth, xylose utilization and ethanol production of the engineered strain were enhanced under both stress and nonstress conditions. The engineered strain showed 49.5% and 17.5% higher ethanol productivity in laboratory media and industrial lignocellulosic media, respectively, at 36 °C compared with the parent strain. This study provides novel insights on the rational design and construction of feedback genetic circuits for dynamically improving yeast robustness.

Novel ratiometric electrochemical sensor for no-wash detection of fluorene-9-bisphenol based on combining CoN nanoarrays with molecularly imprinted polymers.

No-wash detection of small molecules in real samples has been attracting attention in the field of sensors including electroanalytical biosensors. Based on the direct electrochemical oxidation of fluorene-9-bisphenol (BHPF) on a CoN nanoarray electrode, we developed a ratiometric molecularly imprinted polymeric electrochemical (MIP-EC) sensor to realize no-wash detection of BHPF in serum and tap water. The CoN nanoarray in situ grown on carbon cloth (CC) served as the working electrode, which could load the electroactive toluidine blue (TB) and be modified by the MIPs. As the MIP concentration on the modified electrode surface was increased, the amount of BHPF exposed on the electrode surface increased and the amount of exposed TB decreased. Thus, the values of ΔITB and ΔIBHPF decreased and increased, respectively, with an increasing amount of BHPF. Therefore, a ratiometric strategy was established by using the value of ΔITB/ΔIBHPF as the instruction response to realize detection of BHPF with high sensitivity and reliability. The developed ratiometric MIP-EC sensor showed strong anti-interference ability, good detection reproducibility and stability towards no-wash detection of BHPF as shown from tests with real samples. This work can further provide theoretical and practical guidance for the detection of other familiar small molecules.

An Accurate Volumetric Analysis Method for Evaluating Outcomes of Alveolar Cleft Reconstruction.

An accurate volumetric analysis method for evaluating the outcomes of different types of alveolar cleft reconstruction is essential because it can help determine which graft material is more effective, confirm favorable times for alveolar bone grafting, and improve surgical techniques. This study aimed to introduce a novel method of precisely calculating the bone formation ratio using computer-aided engineering after surgery. A patient with a unilateral alveolar cleft who was treated with anterior iliac crest bone grafting was enrolled in this study. Helical computed tomography scans were performed preoperatively and 12 months postoperatively. The Digital Imaging and Communications in Medicine (DICOM) data were reconstructed as three-dimensional images and saved in the STL format by using Mimics software. STL data were processed by Geomagic Wrap 2017, using the Boolean operation, the newly formed bone of the alveolar was segmented by identifying the differences between the preoperative and the postoperative three-dimensional images. For this patient, the mean volume of the newly formed bone was 0.387 cm, the morphology was clear, the bone formation ratio was 41.4%, the mean time required for calculating the newly formed bone volume was 23 minutes, and the bone survival ratio was 38.7%. This method is a clinically practical, accurately measurement and time-saving method to evaluate the outcome of alveolar cleft reconstruction. Both the volumetric assessment and morphological analysis of the newly formed bone could be determined in a precise manner.

Three-Dimensional Measurement of Maxillary Involvement in Hemifacial Microsomia in Children.

In hemifacial microsomia (HFM), the aberrant mandible structure has always been the focus of attention. How the maxillary development being affected is not clear. The authors sought to comprehensively evaluate the hemifacial maxillary deficiency and to assess for Pruzansky-Kaban score correlation.This is a retrospective research of children with HFM. Demographic information were recorded, and computed tomographic scan were reconstructed and analyzed by segmentation, volumetric and cephalometric measurements. Analyses involved paired t-test, independent sample t-test and one-way analyses of variance.Demographic information revealed 67 patients diagnosed with HFM were included: 10.4 percent type I, 38.8 percent IIa, 28.4 percent type IIb, 22.4 percent type III. The maxillary total volume was found to be significantly decreased on the affected side in patients with type IIa (P = 0.0426) and IIb (P = 0.0004). No notable differences in maxillary sinus volume were found. No significant differences in maxillary width measurements were found between groups type I and III. A descending trend in maxillary bone volume ratio, an increasing trend in maxillary posterior width ratio and a decreasing trend in maxillary middle height ratio was observed from group I to IIb (pmbv* = 0.020; pmpw* = 0.002; pmmh* = 0.004).This study comprehensively characterized the hemifacial microsomia maxillary deficiency. For maxillary total volume and transverse development, the type III group presented characteristics similar to the type I group. We concluded that the severity of maxillary deficiency is not completely consistent with the mandibular deformity classification.

Association of Mandibular Dysplasia With Maxillary Volumetric and Linear Measurements in Children With Hemifacial Microsomia.

In hemifacial microsomia (HFM), the correlations between mandibular dysplasia and maxillary deformities in HFM patients have not yet been assessed. The objective of the present study was to examine the association of maxillary volumetric and linear measurements with mandibular ramus height or corpus length on the affected side in children with unilateral HFM.In this retrospective research, a total of 70 children with unilateral HFM were enrolled at our department from 2010 to 2019. Demographic information was recorded, and computed tomographic scan were reconstructed and analyzed by segmentation, volumetric, and cephalometric measurements. Analyses involved independent sample t-test, univariable, and multivariable linear regression.In the overall population, mandibular ramus height (MRH) was positively associated with the maxillary bone volume (MBV) (r = 0.484, P < 0.001) and maxillary total volume (MTV) (r = 0.520, P < 0.001). Similarly, mandibular corpus length (MCL) was significantly associated with the MBV (r = 0.467, P < 0.001) and MTV (r = 0.520, P < 0.001). Multivariate regression analysis revealed that the MRH or MCL were significantly and independently associated with MBV or MTV (MRH/MBV ß = 0.420, P < 0.001; MRH/MTV ß = 0.391, P < 0.001; MCL/MBV ß = 0.403, P < 0.001; MCL/MTV ß = 0.307, P < 0.01).These results demonstrated that the MBV and MTV are independently associated with MRH or MCL on the affected side in children with unilateral HFM, suggesting a potential interaction between mandibular dysplasia and maxillary deformities.

A plastid phylogeny of the fern genus Arachniodes (Dryopteridaceae).

Arachniodes (Dryopteridaceae) is one of the most confusing and controversial fern genera in terms of its circumscription, nomenclature, and taxonomy. Estimates of species number range from 40 to 200. Previous molecular works included only 2-17 accessions representing 2-12 species of Arachniodes and allied genera, leaving most of the Asian species remain unsampled and the infragneric relationships unclear. In this study DNA sequences of seven plastid markers of 343 accessions representing ca. 68 species of Arachniodes (275 accessions), and 64 outgroup accessions from subfam. Dryopteridoideae and subfam. Polybotryoideae were used to infer a phylogeny with maximum likelihood, Bayesian inference, and maximum parsimony approaches. Our major results include: (1) Two species currently assigned in Arachniodes (A. macrostegia and A. ochropteroides are resolved outside of the core Arachniodes making the currently defined Arachniodes polyphyletic, confirming earlier findings; (2) Lithostegia, Leptorumohra, and Phanerophlebiopsis are indeed synonyms of Arachniodes; (3) Leptorumohra is confirmed to be monophyletic, but Phanerophlebiopsis is polyphyletic; (4) The New World species of Arachniodes are confirmed to be not monophyletic with A. denticulata being nested within the Old World species, suggesting that this species is dispersed from the Old World; (5) Arachniodes s.s is resolved into 12 major clades, some of which are further divisable into recognizable subclades and groups, with A. mutica from Japan being resolved as the sister to the rest of the genus; (6) A number of systematic implications of the phylogeny have been suggested; and (7) the genus is estimated to contain ca. 83 species.

Effect of supplemental simethicone for bowel preparation on adenoma detection during colonoscopy: A meta-analysis of randomized controlled trials.

BACKGROUND AND AIM: Although several randomized controlled trials (RCTs) have reported that supplemental simethicone (SIM) can improve bowel preparation based on polyethylene glycol, there is no consensus as to whether SIM can ultimately increase the adenoma detection rate (ADR) during colonoscopy. A meta-analysis was performed to assess the effect of SIM on ADR during colonoscopy. METHODS: Databases including PubMed, EMBASE, and the Cochrane Library were searched to find relevant RCTs. RCTs evaluating the effect of pre-procedure SIM on the ADR during colonoscopy were finally included, and fixed effect models were applied. RESULTS: Six trials involving 1855 patients were finally included. The present meta-analysis suggested that the ADR during colonoscopy was significantly increased by supplemental SIM (27.9% vs 23.3%, P = 0.02), with a relative risk of 1.20 (95% confidence interval 1.03-1.39). Subgroup analysis suggested that supplemental SIM may be more useful to improve ADR during colonoscopy in endoscopic centers with low baseline ADR. CONCLUSIONS: Supplemental SIM for bowel preparation based on polyethylene glycol is useful to improve the ADR during colonoscopy.

The efficacy of dental floss and a hemoclip as a traction method for the endoscopic full-thickness resection of submucosal tumors in the gastric fundus.

BACKGROUND: Endoscopic full-thickness resection (EFTR) provides a significant advancement to the treatment of gastrointestinal submucosal tumors (SMTs). However, technological challenges, particularly in the gastric fundus, hinder its wider application. Here, we investigated the efficacy of a simple traction method that used dental floss and a hemoclip (DFC) to facilitate EFTR. METHODS: Between July 2014 and December 2016, we retrospectively reviewed data from all patients with SMTs in the gastric fundus originating from the muscularis propria layer that were treated by EFTR at Zhongshan Hospital of Fudan University. Baseline characteristics and clinical outcomes, including procedure time and complications rate, were compared between groups of patients receiving DFC-EFTR and conventional EFTR. RESULTS: A total of 192 patients were included in our analysis (64 in the DFC-EFTR group and 128 in the conventional EFTR group). Baseline characteristics for the two groups were similar. The mean time for DFC-EFTR and conventional EFTR was 44.2 ± 24.4 and 54.2 ± 33.2 min, respectively (P = 0.034). Although no serious adverse events presented in any of our cases, post-EFTR electrocoagulation syndrome (PEECS), as a minor complication, was less frequent in the DFC-EFTR group (3.1% vs. 12.5%, P = 0.036). Univariate and multivariate analysis identified that DFC, when used in EFTR, played a significant role in reducing procedure time and the rate of PEECS. The mean procedure time was significantly shorter in the DFC-EFTR group for lesions over 1.0 cm (P = 0.005), when the lesions were located in the greater curvature of the gastric fundus (P = 0.025) or when the lesions presented with intraluminal growth (P = 0.032). Moreover, when EFTR was carried out by experts, the mean procedure time was 20.4% shorter in the DFC-EFTR group (P = 0.038). CONCLUSIONS: This study indicated that DFC-EFTR for SMTs in the gastric fundus resulted in a shorter procedure time and reduced the risk of PEECS, a minor complication.

[Clinical effect of carvedilol in treatment of children with severe hand-foot-mouth disease caused by enterovirus 71 infection].

OBJECTIVE: To study the clinical effect of carvedilol in the treatment of children with severe hand-foot-mouth disease (HFMD) caused by enterovirus 71 (EV71) infection. METHODS: A retrospective analysis was performed for the clinical data of 86 children with severe HFMD caused by EV71 infection who were admitted to the hospital from April 2016 to August 2017. According to whether carvedilol was used, the children were divided into conventional treatment group with 51 children and carvedilol treatment group with 35 children. A total of 56 healthy children who underwent physical examination at the outpatient service during the same period were enrolled as the control group. The two treatment groups were compared in terms of clinical features and levels of catecholamines (norepinephrine, adrenaline and dopamine), and the levels of catecholamines were compared between these two treatment groups and the control group. RESULTS: Before treatment, the conventional treatment group and the carvedilol treatment group had significantly higher levels of norepinephrine and adrenaline than the control group (P<0.05). After treatment, both the conventional treatment group and the carvedilol treatment group had significant reductions in norepinephrine, adrenaline, blood glucose, systolic pressure, diastolic pressure, heart rate, body temperature and leukocyte count (P<0.05). Compared with the conventional treatment group, the carvedilol treatment group had significantly lower dopamine level, blood glucose, heart rate and respiratory rate after treatment (P<0.05). CONCLUSIONS: Changes in norepinephrine and adrenaline might be involved in the pathogenesis of severe HFMD caused by EV71 infection. Carvedilol, in addition to the conventional treatment, can improve respiration, heart rate and blood glucose in children with severe HFMD caused by EV71 infection.

Transplanted Dental Pulp Stem Cells Migrate to Injured Area and Express Neural Markers in a Rat Model of Cerebral Ischemia.

BACKGROUND/AIMS: Ischemic stroke is a major cause of disability and mortality worldwide, while effective restorative treatments are limited at present. Stem cell transplantation holds therapeutic potential for ischemic vascular diseases and may provide an opportunity for neural regeneration. Dental pulp stem cells (DPSCs) origin from neural crest and have neuro-ectodermal features including proliferation and multilineage differentiation potentials. METHODS: The rat model of middle cerebral artery occlusion (MCAO) was used to evaluate whether intravenous administration of DPSCs can reduce infarct size and to estimate the migration and trans-differentiation into neuron-like cells in focal cerebral ischemia models. Brain tissues were collected at 4 weeks following cell transplantation and analyzed with immunofluorescence, immunohistochemistry and real-time polymerase chain reaction (RT-PCR) methods. RESULTS: Intravenously administration of rat-derived DPSCs were found to migrate into the boundary of ischemic areas and expressed neural specific markers, reducing infarct volume and cerebral edema. CONCLUSIONS: These results suggest that DPSCs treatment may serve as a potential therapy for clinical stroke patients in the future.

Preparation, Characterization, and Antioxidant Activity Evaluation of Liposomes Containing Water-Soluble Hydroxytyrosol from Olive.

Due to the multiple hydroxyl groups in its structure, hydroxytyrosol (HT) is very sensitive to air and light and has very strong instability and hydrophilicity that affect its biological activity. This study attempted to prepare liposomes containing water-soluble HT to improve the bioavailability and biocompatibility of the target drug. The preparation process factors (temperature, mass ratio of phospholipid (PL) and cholesterol (CH), Tween-80 volume, HT mass) were studied and response surface methodology (RSM) was applied to optimize the conditions. The results demonstrated that by using a temperature of 63 °C, mass ratio of PL and CH 4.5:1, HT mass 5 mg and Tween-80 volume of 6 mL, HT liposomes with an encapsulation efficiency (EE) of 45.08% were prepared. It was found that the particle sizes of the HT liposomes were well distributed in the range of 100-400 nm. Compared to free HT, prepared HT liposomes had better stability and a distinct slow release effect in vitro. Besides, HT liposomes presented better DPPH radical scavenging activity than free HT, which could be due to the fact that HT was encapsulated fully inside the liposomes. In addition, the encapsulation mechanism of HT was evaluated. In summary, the results indicated that HT liposome could enhance the antioxidant activity and was a promising formulation for prolonging the biological activity time of the target drug.