Efficient bioconversion from acid hydrolysate of waste oleaginous yeast biomass after microbial oil extraction to bacterial cellulose by Komagataeibacter xylinus.

Biomass acid hydrolysate of oleaginous yeast Trichosporon cutaneum after microbial oil extraction was applied as substrate for bacterial cellulose (BC) production by Komagataeibacter xylinus (also named as Gluconacetobacter xylinus previously) for the first time. BC was synthesized in static culture for 10 days, and the maximum BC yield (2.9 g/L) was got at the 4th day of fermentation. Most carbon sources in the substrate (glucose, mannose, formic acid, acetic acid) can be utilized by K. xylinus. The highest chemical oxygen demand (COD) removal (40.7 ± 3.0%) was obtained at the 6th day of fermentation, and then the COD increased possibly due to the degradation of BC. The highest BC yield on COD consumption was 38.7 ± 4.0% (w/w), suggesting that this is one efficient bioconversion for BC production. The BC structure was affected little by the substrate by comparison with that generated in classical HS medium using field-emission scanning electron microscope (FE-SEM), Fourier transform infrared, and X-ray diffraction. Overall, this technology can both solve the issue of waste oleaginous yeast biomass and produce valuable biopolymer (BC).

Regenerated cellulose as template for in-situ synthesis of monoclinic titanium dioxide nanocomposite carbon aerogel towards multiple application in water treatment.

Immobilizing catalyst system faces the challenge of balancing catalysts stability and exposure of active site in water treatment. In this study, a novel in-situ synthesis of monoclinic phase of titanium dioxide (TiO2(B)) in cellulose-derived carbon aerogel (TCA) is proposed for processing multi-task in water treatment. The homogeneous gelation reaction supported the high dispersion of TiO2(B) in carbon skeleton. Meanwhile, TiO2 acts as crosslinker to reinforce cellulose network, then the grain refinement of amorphous TiO2 is limited to obtain TiO2(B) during carbonization. Benefiting from the reinforced structure, TCA remains the porous structure after carbonization and exposes more adsorption site than carbon aerogel blended with anatase particles (ACA). The adsorption performance of TCA are 837.3 mg/g, 1156.2 mg/g and 512.6 mg/g on methylene blue, malachite green and crystal violet, respectively. Compared with ACA, the superior interaction between TiO2 and graphite-like carbon improves the degradation rate of tetracycline from 1.3 × 10-3 min-1 to 8.6 × 10-3 min-1, and maintains the degradation efficiency in 3 rounds cyclic test. Besides, TCA also exhibits nearly twice to ACA on absorption capacity of different oil. This facile in-situ synthesis method offers a new insight in fabricating carbon aerogel immobilized photocatalysts system for multi-task in water treatment.

Removal of Fermentation Inhibitors from Sugarcane Bagasse Hydrolysate via Post-cross-linked Hydrophilic-Hydrophobic Interpenetrating Polymer Networks.

The efficient and economical removal of fermentation inhibitors from the complex system of biomass hydrolysate was one of the basics and keys in bio-chemical transformation. In this work, post-cross-linked hydrophilic-hydrophobic interpenetrating polymer networks (PMA/PS_pc IPNs and PAM/PS_pc IPNs) were proposed to remove fermentation inhibitors from sugarcane bagasse hydrolysate for the first time. PMA/PS_pc and PAM/PS_pc IPNs can obviously enhance the adsorption performance towards fermentation inhibitors due to their higher surface area and hydrophilic-hydrophobic synergetic surface properties, especially PMA/PS_pc IPNs has higher selectivity coefficients of 4.57, 4.63, 4.85, 16.0, 49.43, and 22.69, and higher adsorption capacity of 24.7 mg/g, 39.2 mg/g, 52.4 mg/g, 9.1 mg/g, 13.2 mg/g, and 144.9 mg/g towards formic acid, acetic acid, levulinic acid (LA), 5-hydroxymethylfurfural (HMF), furfural, and acid-soluble lignin (ASL), respectively, in a lower total sugar loss of 2.03%. The adsorption kinetics and isotherm of PMA/PS_pc IPNs were studied to elucidate its adsorption behavior towards fermentation inhibitors. In addition, the cyclic utilization property of PMA/PS_pc IPNs was stable. Synthesizing PMA/PS_pc IPNs is a new strategy to provide an efficient adsorbent for the removal of fermentation inhibitors from lignocellulosic hydrolysate.

Synthesis of polyacrylamide/polystyrene interpenetrating polymer networks and the effect of textural properties on adsorption performance of fermentation inhibitors from sugarcane bagasse hydrolysate.

Economical removal of fermentation inhibitors from lignocellulosic hydrolysate plays a considerable role in bioconversion of lignocellulose biomass. In this work, the textural properties of polyacrylamide/polystyrene interpenetrating polymer networks (PAM/PS IPNs) on adsorption of fermentation inhibitors from sugarcane bagasse hydrolysate (SCBH) were investigated for the first time. The results showed that, the specific surface area, pore diameter and surface polarity had important influence on its adsorption performance towards sugars, organic acids, furans and acid-soluble lignin. The PAM/PS IPNs under the optimal copolymerization situation achieved the high selectivity coefficients of 4.07, 14.9, 21.2 and 25.8 with respective to levulinic acid, furfural, hydroxymethylfurfural (HMF) and acid-soluble lignin, and had a low total sugar loss of 2.09%. Overall, this research puts forward a design and synthetic strategy for adsorbent to remove fermentation inhibitors from lignocellulosic hydrolysate.

Bacterial cellulose based superabsorbent production: A promising example for high value-added utilization of clay and biology resources.

Superabsorbent was synthesized from bacterial cellulose (BC) generated by in situ fermentation on bentonite inorganic gel (BIG). For BIG preparation, the effect of sodium agent's type and content, temperature and time of sodium-modification, and gelling agent's type and content on the viscosity of BIG were learned to optimize the synthesis process. For polymerization, the effect of different factors including ratio of monomer to substrate (modified BC from in situ fermentation), content of initiator and crosslinker, monomer neutralization degree, reaction temperature and time on the performance of composite (superabsorbent) synthesized were analyzed. Under optimal condition, the composite showed good water absorption, salts absorption, and water retention capacity. The original bentonite, sodium-based bentonite, BIG and composite structure was characterized by X-ray fluorescence (XRF), nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM) and thermogravimetric analysis (TGA), and the characterization partly explained the performance of water absorption and thermal stability of the composite. Overall, this study provides one method for superabsorbent synthesis from low-cost and natural resources.

Adsorption Study of Acid Soluble Lignin Removal from Sugarcane Bagasse Hydrolysate by a Self-Synthesized Resin for Lipid Production.

An adsorption resin CX-6 was synthesized and used for acid soluble lignin (ASL) removal from sugarcane bagasse hydrolysate (SCBH). The adsorption conditions of pH value, amount of adsorbent, initial ASL concentration, and temperature on ASL adsorption were discussed. The results showed the adsorption capacity of ASL was negatively affected by increasing temperature, solution pH, and adsorbent dose, and was positively affected by increasing initial concentration. The maximum adsorption capacity of ASL was 135.3 mg/g at initial ASL concentration 6.46 g/L, adsorption temperature 298 K, and pH 1. Thermodynamic study demonstrated that the adsorption process was spontaneous and exothermic. Equilibrium and kinetics experiments were proved to fit the Freundlich isotherm model and pseudo-second-order model well, respectively. Fermentation experiment showed that the SCBH after combined overliming with resin adsorption as fermentation substrate for microbial lipid production by Trichosporon cutaneum and Trichosporon coremiiforme was as better as that of SCBH by combined overliming with active charcoal adsorption, and more efficient than that of SCBH only by overliming. Moreover, the regeneration experiment indicated that the CX-6 resin is easy to regenerate and its recirculated performance is stable. In conclusion, our results provide a promising adsorbent to detoxify lignocellulose hydrolysate for further fermentation.