Changes of maxillary central incisor and alveolar bone in Class II Division 2 nonextraction treatment with a fixed appliance or clear aligner: A pilot cone-beam computed tomography study.

INTRODUCTION: This retrospective clinical study investigated the clinical changes of maxillary central incisor and alveolar bone in Class II Division 2 nonextraction treatment with fixed appliances or clear aligners on the basis of cone-beam computed tomography. METHODS: Fifty-nine Chinese Han patients with similar demographic characteristics were collected from a conventional bracket group, a self-ligating bracket group, and a clear aligner group. All measurements about root resorption and alveolar bone thickness on the cone-beam computed tomography images were tested. Changes between pretreatment and posttreatment were evaluated by paired-sample t test. The variation among the 3 groups was compared by 1-way analysis of variance. RESULTS: The resistance center of the maxillary central incisor showed upward or forward movement, and the axial inclination was increased in 3 groups (P <0.0001). Root volume loss in the clear aligner group (23.68 ± 4.82 mm3) was significantly less than that in the fixed appliances group (28.24 ± 6.44 mm3 in the conventional bracket group, 28.17 ± 6.07 mm3 in the self-ligating bracket group) (P <0.05). All 3 groups showed a significant decrease in palatal alveolar bone and total bone thickness at all 3 levels at posttreatment. In contrast, labial bone thickness significantly increased except for crestal level l. Among the 3 groups, the clear aligner group had a prominent increase in labial bone thickness at the apical level (P = 0.0235). CONCLUSIONS: Clear aligner treatment for Class II Division 2 malocclusions could effectively reduce the incidence of fenestration and root resorption. Our findings will be beneficial to comprehensively understand the effectiveness of different appliances for Class II Division 2 malocclusions treatment.

Evaluating the accuracy of automated cephalometric analysis based on artificial intelligence.

BACKGROUND: The purpose of this study was to evaluate the accuracy of automatic cephalometric landmark localization and measurements using cephalometric analysis via artificial intelligence (AI) compared with computer-assisted manual analysis. METHODS: Reconstructed lateral cephalograms (RLCs) from cone-beam computed tomography (CBCT) in 85 patients were selected. Computer-assisted manual analysis (Dolphin Imaging 11.9) and AI automatic analysis (Planmeca Romexis 6.2) were used to locate 19 landmarks and obtain 23 measurements. Mean radial error (MRE) and successful detection rate (SDR) values were calculated to assess the accuracy of automatic landmark digitization. Paired t tests and Bland‒Altman plots were used to compare the differences and consistencies in cephalometric measurements between manual and automatic analysis programs. RESULTS: The MRE for 19 cephalometric landmarks was 2.07 ± 1.35 mm with the automatic program. The average SDR within 1 mm, 2 mm, 2.5 mm, 3 and 4 mm were 18.82%, 58.58%, 71.70%, 82.04% and 91.39%, respectively. Soft tissue landmarks (1.54 ± 0.85 mm) had the most consistency, while dental landmarks (2.37 ± 1.55 mm) had the most variation. In total, 15 out of 23 measurements were within the clinically acceptable level of accuracy, 2 mm or 2°. The rates of consistency within the 95% limits of agreement were all above 90% for all measurement parameters. CONCLUSION: Automatic analysis software collects cephalometric measurements almost effectively enough to be acceptable in clinical work. Nevertheless, automatic cephalometry is not capable of completely replacing manual tracing. Additional manual supervision and adjustment for automatic programs can increase accuracy and efficiency.

[Study on the sterilization effect of plasma jet and plasma activated water on Streptococcus mutans].

To explore the effects of plasma jet (PJ) and plasma activated water (PAW) on the sterilization of Streptococcus mutans ( S. mutans) and compare the advantages and disadvantages of the two methods, so as to provide a basis for plasma treatment of dental caries and to enrich the treatment means of dental caries, an atmospheric pressure plasma excitation system was built, and the effects of PJ and PAW on the sterilization rate of S. mutans and the changes of temperature and pH during treatment were studied under different excitation voltage ( U e ) and different excitation time ( t e ). The results showed that in the PJ treatment, the difference in the survival rate of S. mutans between the treatment group and the control group was statistically significant ( P = 0.007, d=2.66) when U e = 7 kV and t e = 60 s, and complete sterilization was achieved at U e = 8 kV and t e = 120 s in the PJ treatment. In contrast, in the PAW treatment, the difference in the survival rate of S. mutans between the treatment group and the control group was statistically significant ( P = 0.029, d = 1.71) when U e = 7 kV and t e = 30 s, and complete sterilization was achieved with PAW treatment when U e = 9 kV and t e = 60 s. Results of the monitoring of temperature and pH showed that the maximum temperature rise during PJ and PAW treatment did not exceed 4.3 °C, while the pH value after PAW treatment would drop to a minimum of 3.02. In summary, the optimal sterilization parameters for PJ were U e =8 kV and 90 s < t e ≤ 120 s, while the optimal sterilization parameters for PAW were U e = 9 kV and 30 s< t e ≤ 60 s. Both treatment methods achieved non-thermal sterilization of S. mutans, where PJ required only a smaller U e to achieve complete sterilization, while at pH < 4.7, PAW only required a shorter t e to achieve complete sterilization, but its acidic environment could cause some chemical damage to the teeth. This study can provide some reference value for plasma treatment of dental caries.

The combination of experimental periodontitis and oral microbiota from periodontitis patients aggravates liver fibrosis in mice.

AIM: Periodontitis (PD) is the sixth most prevalent disease around the world and is involved in the development and progression of multiple systemic diseases. Previous studies have reported that PD may aggravate liver injuries. The objective of this study was to investigate whether and how PD affects liver fibrosis. MATERIALS AND METHODS: Ligature-induced PD (LIP) was induced in male C57/B6J mice, and sub-gingival plaques (PL) from patients with PD were applied to mouse teeth. Liver fibrosis was induced by carbon tetrachloride (CCl4 ) injection. The mice were randomly divided into six groups: Oil, Oil+LIP, Oil+LIP+PL, CCl4 , CCl4 +LIP, and CCl4 +LIP+PL. Alveolar bone resorption was evaluated by methylene blue staining. Hepatic function was analysed by serum alanine aminotransferase and hepatic hydroxyproline. Picrosirius red and α-smooth muscle actin (SMA) staining were used to evaluate the fibrotic area. RNA sequencing and quantitative RT-PCR were used to measure gene expression. Western blotting was used to measure protein levels. Flow cytometry was used to analyse the accumulation of immune cells. Mouse microbiota were analysed using 16S rRNA gene sequencing. RESULTS: Mice in the CCl4 +LIP+PL group displayed higher serum alanine aminotransferase and hepatic hydroxyproline as well as more Picrosirius red-positive and α-SMA-positive areas in liver samples than those of the CCl4 group, suggesting that PD (LIP+PL) aggravated CCl4 -induced hepatic dysfunction and liver fibrosis. Consistently, the expression of fibro-genic genes and the protein levels of transforming growth factor ß were much higher in the CCl4 +LIP+PL group than in the CCl4 group. Flow cytometry revealed that PD increased the accumulation of immune cells, including Kupffer cells, B cells, and Th17 cells, in the liver of mice with CCl4 treatment. PD also increased the expression of inflammatory genes and activated pro-inflammatory nuclear factor-kappa B pathway in the livers of CCl4 -injected mice. Moreover, PD altered both oral and liver microbiota in CCl4 -injected mice. CONCLUSIONS: PD aggravates CCl4 -induced hepatic dysfunction and fibrosis in mice, likely through the increase of inflammation and alteration of microbiota in the liver.

Impact of chronic outward force on arterial responses of proximal and distal of long superficial femoral artery stent.

BACKGROUND: Self-expanding nitinol stent (SENS) implantation is commonly oversized in the superficial femoral artery (SFA), and leads to chronic outward force (COF) and in-stent restenosis (ISR). This study aimed to investigate the impact of COF of oversizing SENS on ISR of SFA. METHODS: In patients with implanted SENS in SFA, intimal hyperplasia especially between proximal segment and distal segment was evaluated by quantitative angiography, and the impact of COF on mid-term angiographic outcomes was investigated. In addition, porcine model with implanted SENS was used to evaluate the impact of COF on angiographic and histopathologic outcomes at 1 month. Excised stented arteries were evaluated by histopathologic analysis. RESULTS: We analyzed 65 SENS in 61 patients with follow-up angiography at 6 months to 1 year. The baseline diameter was 6.8 ± 0.71 mm and length were 97.0 ± 33.8 mm for the SENS. The ratio of the diameter of the stent to the reference vessel was 1.3 ± 0.24 at the proximal portion and 1.53 ± 0.27 at the distal portion (P < 0.001). In the long SFA stent, stent-to-vessel ratio was significantly higher in the distal stent than in the proximal stent (1.3 ± 0.2 vs. 1.55 ± 0.25, P = 0.001). ISR incidence was higher at the distal stent (37.3% vs 52.6%, P = 0.029). All 11 pigs survived for 4 weeks after SENS implantation. The vessel diameter was 4.04 ± 0.40 mm (control group) vs 4.45 ± 0.63 mm (oversized group), and the implanted stent diameter was 5.27 ± 0.46 mm vs. 7.18 ± 0.4 mm (P = 0.001). The stent-to-vessel diameter ratio was 1.31 ± 0.12 versus 1.63 ± 0.20 (P < 0.001). After 4 weeks, restenosis % was 29.5 ± 12.9% versus 46.8 ± 21.5% (P = 0.016). The neointimal area was 5.37 ± 1.15 mm2 vs. 8.53 ± 5.18 mm2 (P = 0.05). The restenosis % was 39.34 ± 8.53% versus 63.97 ± 17.1% (P = 0.001). CONCLUSIONS: COF is an important cause of restenosis in the distal portion of the SFA stent. Optimal sizing of the SFA stent is important to reduce the incidence of restenosis. Therefore, COF was an important factor of restenosis following distal SFA stenting.

Root dilaceration in maxillary impacted canines and adjacent teeth: A retrospective analysis of the difference between buccal and palatal impaction.

INTRODUCTION: This research aimed to analyze the prevalence of root dilaceration in buccally impacted canines (BICs) and palatally impacted canines (PICs) with their adjacent teeth based on a retrospective cone-beam computed tomography (CBCT) investigation. METHODS: Pretreatment CBCT images of 145 subjects with unilateral maxillary canine impaction and 145 age- and sex-matched subjects without impaction were used. Prevalence of dilaceration (subclassified to root curvature and apical hook based on severity) in canines and adjacent teeth was determined in CBCT records. The root length of maxillary impacted canines was measured for further morphologic evaluations. RESULTS: Impacted canines had a significantly higher prevalence of root dilaceration than the control group and compared with the erupted contralateral canines in the experimental group (P < 0.001 for both). A significantly higher prevalence of root dilaceration was found in adjacent lateral incisors of the PICs subgroup than that of the control group (P < 0.001). Adjacent premolars had a higher prevalence of dilacerated roots in the PICs subgroup (P < 0.001) than the control group, but not for the BICs subgroup. Significantly higher prevalence of curvature (P < 0.001 for both) and hook (P = 0.008 and P < 0.001, respectively) were found in BICs and PICs roots compared with the control group. Both types of impacted canines had significantly shorter roots than the control group (P < 0.001 for both). CONCLUSIONS: BICs and PICs have a higher tendency to present root dilaceration and shorter roots. Unlike BICs, adjacent teeth to PICs were more frequently observed to have root dilaceration.

Non-syndromic cleft lip with or without palate susceptible loci is associated with tooth agenesis.

OBJECTIVE: Non-syndromic tooth agenesis (NSTA) may share common genetic factors with non-syndromic cleft lip with or without cleft palate (NSCL/P). Single-nucleotide polymorphisms (SNPs) were associated with individual's susceptibility to these anomalies. We selected five NSCL/P-associated SNPs from our previous genome-wide association study (GWAS) to test for the associations with NSTA. MATERIALS AND METHODS: A total of 677 NSTA cases and 1,144 healthy controls were recruited in this case-control study. Five genome-wide NSCL/P-associated SNPs (rs2235371, rs7078160, rs8049367, rs4791774, and rs13041247) were genotyped by TaqMan platform and evaluated for the associations with NSTA using plink software. RESULTS: No significant associations between these SNPs and risk of NSTA were observed in the overall analysis and subgroup analysis with the number of missing teeth. However, in the subgroup analysis by tooth position, rs8049367 was nominally associated with mandibular premolar agenesis (Dominant model: ORdom  = 0.66, 95% CIdom  = 0.47-0.93, pdom  = 0.016; Heterozygote model: ORhet  = 0.60, 95% CIhet  = 0.41-0.88, Phet  = 0.008). Rs4791774 showed a nominal association with congenitally missing maxillary canine (Dominant model: ORdom  = 0.53, 95% CIdom  = 0.28-0.98, pdom  = 0.041; Heterozygote model: ORhet  = 0.50, 95% CIhet  = 0.26-0.97, Phet  = 0.041) and premolar (Additive model: OR = 0.59, 95% CI = 0.36-0.96, p = 0.035). CONCLUSION: This study showed that NSCL/P susceptible loci rs8049367 and rs4791774 were probably associated with the risk of NSTA.

Cementless bilateral synchronous total hip arthroplasty in ankylosing spondylitis with hip ankylosis.

PURPOSE: This study was a retrospective analysis of early and mid-term clinical effects and perioperative management of cementless bilateral synchronous total hip arthroplasty (THA) in patients with ankylosing spondylitis (AS) with bilateral hip ankylosis. METHODS: Fifteen AS patients (30 hips) with bilateral hip ankylosis were managed with cementless bilateral synchronous THA. Surgical outcome was evaluated using the visual analogue scale (VAS), the range of motion and the Harris score. RESULTS: The mean follow-up period was 29.3 months. At the last follow-up visit, the VAS score decreased from 7.53 ± 0.99 before the operation to 2.40 ± 0.91. The Harris score increased from 24.8 ± 7.42 before the operation to 83.8 ± 4.61. The total range of motion increased from 78.73 ± 14.53 before the operation to 209.73 ± 16.19 after the operation. After the operation, there was one case of early hip dislocation, one case of femoral nerve stretch injury and one case of superficial incision infection. There were no cases of deep venous thrombosis. X-ray examinations did not show prosthetic loosening or displacement. CONCLUSION: AS patients with bilateral hip ankylosis can be treated with cementless bilateral synchronous THA, which could greatly improve hip joint function without significant complications. The clinical effects proved to be satisfactory.

Clinical analysis of nonsyndromic oligodontia phenotypes.

OBJECTIVES: To provide references, this study investigated the clinical characteristics of patients with nonsyndromic oligodontia. METHODS: The information of 178 patients with oligodontia was collected, including histories, oral examinations, and panoramic radiographs. Tooth agenesis characteristics were calculated and evaluated. All the data were statistically analyzed with SPSS 24.0 software. RESULTS: No significant difference in the number of missing teeth was found between sexes nor between the right and left sides, and congenitally missing teeth affected the maxillary arch (P<0.05). The highest prevalence of tooth agenesis was observed in the mandibular second premolars. In the maxillary arch, the most common pattern of tooth agenesis was agenesis of the bilateral first and second premolars. The agenesis of the bilateral second premolars was observed in the mandibular arch. The prevalence of a symmetric pattern between the right and left quadrants was significantly higher than that of matched patterns between the maxillary and mandibular antagonistic quadrants. Approximately 16.85% of patients with nonsyndromic oligodontia were affected by other tooth-related anomalies. CONCLUSIONS: The common patterns of tooth agenesis were successfully identified in patients with nonsyndromic oligodontia. Dentists need to provide multidisciplinary treatments for patients with nonsyndromic oligodontia because of variations in occluding and full-mouth tooth agenesis patterns.

Microstructural Adaptation for Prey Manipulation in the Millipede Assassin Bugs (Hemiptera: Reduviidae: Ectrichodiinae).

Species in Ectrichodiinae are known for their prey specialization on millipedes. However, knowledge of the morphological adaptations to this unique feeding habit was limited. In the current study, we examined the microstructures of the antennae, mouthparts, and legs of four millipede feeding ectrichodiines, Ectrychotes andreae (Thunberg, 1888), Haematoloecha limbata Miller, 1953, Labidocoris pectoralis (Stål, 1863), and Neozirta eidmanni (Taueber, 1930), and compared them with those of three species of tribelocephalines, a group closely related to Ectrichodiinae. On the antennae, we found four types of antennal sensilla. On the mouthparts, we recognized four types of labial sensilla. Sampled ectrichodiines have distinctly more and denser slightly transverse ridges on the external side of mandibles than tribelocephalines. E. andreae and H. limbata possess numerous small papillae fringed with densely arranged finger-print-like grains on the trochanter and femur; these probably facilitate the immobilization of prey. Overall, our study illustrates, at a microstructural level, the remarkable morphological adaption of prey manipulation in ectrichodiine, and has enhanced our understanding about stenophagy in the family Reduviidae.

Effect of phenol formaldehyde-associated microplastics on soil microbial community, assembly, and functioning.

Increasing investigations explore the effects of plastic pollutants on bacterial communities, diversity, and functioning in various ecosystems. However, the impact of microplastics (MPs) on the eukaryotic community, microbial assemblages, and interactions is still limited. Here, we investigated bacterial and micro-eukaryotic communities and functioning in soils with different concentrations of phenol formaldehyde-associated MPs (PF-MPs), and revealed the factors, such as soil properties, microbial community assembly, and interactions between microbes, influencing them. Our results showed that a high concentration (1%) of PF-MPs decreased the microbial interactions and the contribution of deterministic processes to the community assembly of microbes, and consequently changed the communities of bacteria, but not eukaryotes. A significant and negative relationship was determined between N2O emission rate and functional genes related to nitrification, indicating that the competitive interactions between functional microbes would affect the nitrogen cycling of soil ecosystem. We further found that vegetable biomass weakly decreased in treatments with a higher concentration of PF-MPs and positively related to the diversity of micro-eukaryotic communities and functional diversity of bacterial communities. These results suggest that a high concentration of the PF-MPs would influence crop growth by changing microbial communities, interactions, and eukaryotic and functional diversity. Our findings provide important evidence for agriculture management of phenol formaldehyde and suggest that we must consider their threats to microbial community compositions, diversity, and assemblage in soils due to the accumulation of PF-MPs widely used in the field.

Scanning Electron Microscopy of Antennae and Mouthparts of Mezira yunnana Hsiao (Hemiptera: Aradidae): Specialized Microstructures Reflecting Adaptation to Mycetophagy.

Many species of the family Aradidae (also known as flat bugs) feed on fungal mycelia and fruiting bodies. In order to better understand the morphological adaptation to this unique feeding habit, we examined the microstructure of antennae and mouthparts of an aradid species, Mezira yunnana Hsiao, using scanning electron microscope, and documented the fungal feeding process under laboratory conditions. The antennal sensilla include three subtypes of sensilla trichodea, three subtypes of sensilla basiconica, two subtypes of sensilla chaetica, sensilla campaniformia, and sensilla styloconica. The apex of the second segment of flagellum has a large number of various sensilla forming a sensilla cluster. The labial tip is distally constricted, which is rarely observed in other Pentatomomorpha species. The labial sensilla include three subtypes of sensilla trichodea, three subtypes of sensilla basiconica, and a sensilla campaniformia. The tip of the labium has only three pairs of sensilla basiconica III and small comb-shaped cuticular processes. The external surface of the mandibular apex has 8-10 ridge-like central teeth. A series of key morphological structures associated with mycetophagous feeding habit were identified, which will facilitate future studies on adaptive evolution of species in Pentatomomorpha as well as in other heteropteran lineages.

Research Models in Dentine Development and Regeneration.

Dentine is a major component of teeth and is responsible for many of their functions, such as mastication and neural sensation/transduction. Over the past decades, numerous studies have focused on dentine development and regeneration using a variety of research models, including in vivo, ex vivo and in vitro models. In vivo animal models play a crucial role in the exploration of biochemical factors that are involved in dentine development, whereas ex vivo and in vitro models contribute mainly to the identification of biophysical factors in dentine regeneration, of which mechanical force is most critical. In the present review, research models involved in studies related to dentine development and regeneration were screened from publications released in recent years and summarised comprehensively, particularly in vivo animal models including prokaryotic microinjection, Cre/LoxP, CRISPR/Cas9, ZFN and TALEN, and scaffold-based in vitro and ex vivo models. The latter were further divided by the interactive forces. Summarising these research models will not only benefit the development of future dentine-related studies but also provide hints regarding the evolution of novel dentine regeneration strategies.

Wireless, battery-free, multifunctional integrated bioelectronics for respiratory pathogens monitoring and severity evaluation.

The rapid diagnosis of respiratory virus infection through breath and blow remains challenging. Here we develop a wireless, battery-free, multifunctional pathogenic infection diagnosis system (PIDS) for diagnosing SARS-CoV-2 infection and symptom severity by blow and breath within 110 s and 350 s, respectively. The accuracies reach to 100% and 92% for evaluating the infection and symptom severity of 42 participants, respectively. PIDS realizes simultaneous gaseous sample collection, biomarker identification, abnormal physical signs recording and machine learning analysis. We transform PIDS into other miniaturized wearable or portable electronic platforms that may widen the diagnostic modes at home, outdoors and public places. Collectively, we demonstrate a general-purpose technology for rapidly diagnosing respiratory pathogenic infection by breath and blow, alleviating the technical bottleneck of saliva and nasopharyngeal secretions. PIDS may serve as a complementary diagnostic tool for other point-of-care techniques and guide the symptomatic treatment of viral infections.

[Experience of using anterior windowing of the femur in revision total hip arthroplasty].

OBJECTIVE: To discuss the clinical results of anterior windowing of the femur to remove the femoral component and cement in revision total hip arthroplasty. METHODS: From September 1999 to May 2011, 31 revision cases received anterior windowing of the femur in operation. There were 12 male and 19 female, with the average age in operation was 61.8 years (from 40 to 83 years). The reason for revision included aseptic loosening in 12 cases, infection in 4 cases, breakage of femoral stem in 11 cases and acetabular liner wear in 4 hemi-arthroplasties. Nine cases were cemented and 22 were non-cemented for the primary stem. The position of the window located in the anterior femur with 6 cases of complete windowing from the proximal to the end of the stem. Another 25 cases received regional windowing just around the tip of the stem. In revisions, non-cemented rectangular revision stem were used for 27 cases and two-stage surgery were used for 4 infection cases. RESULTS: In all revisions, femoral stems and cement fragments were removed successfully and safely without any complications of fracture and perforation of new stems. All femur windows showed successfully union for average 14 weeks (12-18 weeks). There were some postoperative complications. One recurrent dislocation was treated using plaster external fixation for 8 weeks. One case with dislocation and fracture along with the window was revised by cerclage fixation. One periprosthetic fracture due to trauma was treated by cerclage fixation. The average Harris score of the hip improved to 83 points (75 to 90 points) at an average 5.5 years follow-up (0.5 to 12.0 years). Twenty six cases were completely followed up. Revision femoral stems were well-fixed without any subsidence or loosening. CONCLUSIONS: Anterior windowing of the femur is a proven technique which can be used to remove femoral stem and cement conveniently and safely without any fractures in revision total hip arthroplasty.

Removal of lignin and silica from rice straw for enhanced accessibility of holocellulose for the production of high-value chemicals.

The intricate nature and rigidity of rice straw, particularly the presence of lignin and silica, hinders the catalytic valorization, consequently decreasing the yield of target products. This study reports the concurrent removal of lignin and silica from rice straw to obtain enriched holocellulose, then transforming it to furfural (FUR) and levulinic acid (LA). Interestingly, rice straw in the form of powder displays an improved removal of lignin (51.0%) and silica (92.0%) during ammonia treatment. Encouragingly, adding organic solvents, such as THF, to the aqueous system during the pretreatment of rice straw improves the lignin removal to 60.0%. Upon improving lignin removal to 60%, the obtained holocellulose enriched solid residue yields 71.0% FUR along with 52.0% LA, which is 8 and 4-fold higher than what is obtained with parent rice straw, signifying the importance and the prerequisite of lignin and silica removal from rice straw.

Motion Fatigue State Detection Based on Neural Networks.

Aiming at the problem of fatigue state detection at the back of sports, a cascade deep learning detection system structure is designed, and a convolutional neural network fatigue state detection model based on multiscale pooling is proposed. Firstly, face detection is carried out by a deep learning model MTCNN to extract eye and mouth regions. Aiming at the problem of eye and mouth state representation and recognition, a multiscale pooling model (MSP) based on RESNET is proposed to train the eye and mouth state. In real-time detection, the state of the eye and mouth region is recognized through the trained convolution neural network model. Finally, the athlete's fatigue is determined based on PERCLOS and the proposed mouth opening and closing frequency (FOM). The experimental results show that in the training process, we set the batch_size = 100 and the initial learning rate = 0.01. When the evaluation index is no longer improved, the learning rate is reduced by 10 times to 0.001, and a total of 50 epochs are trained. The precision and recall of the system are high. Compared with the infrared image simulating the night state, the RGB image taken by the ordinary camera in the daytime has higher precision and recall. It is proven that the neural network has high detection accuracy, meets the real-time requirements, and has high robustness in complex environments.

A New Species and a New Synonymy of the Neotropical Genus Seridentus Osborn (Hemiptera: Reduviidae: Stenopodainae).

Based on the examination of the type specimens, the following new subjective synonymy is proposed in the Neotropical assassin bug genus Seridentus Osborn, 1904: S. denticulatus Osborn, 1904 = Gnathobleda maculosa Haviland, 1931, syn. nov. Lectotypes of the two nominal species are designated. The type depositories of S. denticulatus, obscurely given in the original description of this species, are confirmed to be the C.A. Triplehorn Insect Collection, Ohio State University, Columbus and the California Academy of Sciences, San Francisco. A new species, S. musettiae sp. nov., is described from Cartago, Costa Rica, representing the northernmost distribution record of the genus. A revised key to the species of Seridentus is provided.

Watershed urbanization enhances the enrichment of pathogenic bacteria and antibiotic resistance genes on microplastics in the water environment.

Microplastics (MPs) serve as vectors for microorganisms and antibiotic resistance genes (ARGs) and contribute to the spread of pathogenic bacteria and ARGs across various environments. Patterns of microbial communities and ARGs in the biofilm on the surface of MPs, also termed as plastisphere, have become an issue of global concern. Although antibiotic resistome in the plastisphere has been detected, how watershed urbanization affects patterns of potential pathogens and ARGs in the microplastic biofilms is still unclear. Here, we compared the bacterial communities, the interaction between bacterial taxa, pathogenic bacteria, and ARGs between the plastisphere and their surrounding water, and revealed the extensive influence of urbanization on them. Our results showed that bacterial communities and interactions in the plastisphere differed from those in their surrounding water. Microplastics selectively enriched Bacteroidetes from water. In non-urbanized area, the abundance of Oxyphotobacteria was significantly (p < 0.05) higher in plastisphere than that in water, while α-Proteobacteria was significantly (p < 0.05) higher in plastisphere than those in water of urbanized area. Pathogenic bacteria, ARGs, and mobile genetic elements (MGEs) were significantly (p < 0.05) higher in the urbanized area than those in non-urbanized area. MPs selectively enriched ARG-carrying potential pathogens, i.e., Klebsiella pneumoniae and Enterobacter cloacae, and exhibited a distinct effect on the relative abundance of ARG and pathogens in water with different urbanization levels. We further found ARGs were significantly correlated to MGEs and pathogenic bacteria. These results suggested that MPs would promote the dissemination of ARGs among microbes including pathogenic bacteria, and urbanization would affect the impact of MPs on microbes, pathogens, and ARGs in water. A high level of urbanization could enhance the enrichment of pathogens and ARGs by MPs in aquatic systems and increase microbial risk in aquatic environments. Our findings highlighted the necessity of controlling the spread of ARGs among pathogens and the usage of plastic products in ecosystems of urban areas.

Research Progress on Lignocellulosic Biomass Degradation Catalyzed by Enzymatic Nanomaterials.

Lignocellulose biomass (LCB) has extensive applications in many fields such as bioenergy, food, medicines, and raw materials for producing value-added products. One of the keys to efficient utilization of LCB is to obtain directly available oligo- and monomers (e. g., glucose). With the characteristics of easy recovery and separation, high efficiency, economy, and environmental protection, immobilized enzymes have been developed as heterogeneous catalysts to degrade LCB effectively. In this review, applications and mechanisms of LCB-degrading enzymes are discussed, and the nanomaterials and methods used to immobilize enzymes are also discussed. Finally, the research progress of lignocellulose biodegradation catalyzed by nano-enzymes was discussed.