A ratiometric electrochemical sensor for multiplex detection of cancer biomarkers using bismuth as an internal reference and metal sulfide nanoparticles as signal tags.

Ratiometric electrochemical sensors can provide a relatively accurate analysis of target analytes due to their self-calibration function. Herein, we report a simple ratiometric strategy for achieving the electrochemical detection of Cd(ii), Hg(ii), Pb(ii) and Zn(ii), as well as multiple cancer biomarkers by using metal sulfide nanoparticles as signal tags. A conductive polymer film of poly(2-amino terephthalic acid) (ATA) was electrochemically produced on a glassy carbon electrode (GCE) and doped with carbon nanotubes (CNTs) and mercaptosuccinic acid (MSA). Using Bi(iii) as an enhancer and internal reference in anodic stripping voltammetry, the MSA-CNT-ATA/GCE exhibited sensitive and distinguishable voltammetric responses to Cd(ii), Hg(ii), Pb(ii) and Zn(ii), with detection limits of 0.13, 0.49, 0.16 and 0.089 µg L-1, respectively. By using CdS, HgS, PbS and ZnS labeled secondary antibodies as the signal tags, alpha-fetoprotein, carbohydrate antigen 19-9, carbohydrate antigen 125, and carcinoembryonic antigen were determined simultaneously according to the amounts of metal sulfide in the sandwich-type complexes, with detection limits of 0.11 pg mL-1, 0.68 mU mL-1, 1.4 mU mL-1 and 0.23 pg mL-1, respectively. This ratiometric approach has a wide scope in the electrochemical detection of heavy metal ions as well as immunoassays with metal ions serving as signal tags.

Gold Nanoparticles Grafted with PLL-b-PNIPAM: Interplay on Thermal/pH Dual-Response and Optical Properties.

Narrowly distributed poly(l-lysine-b-N-isopropylacrylamide) (PLL-b-PNIPAM) was prepared through ring-opening polymerization of ε-benzyloxycarbonyl-l-lysine N-carboxy-α-amino anhydride and atom transfer radical polymerization of NIPAM, followed with the removal of ε-benzyloxycarbonyl group. Then gold nanoparticles (AuNPs) grafted with PLL-b-PNIPAM (PNIPAM-PLL-AuNPs) were obtained by the reduction of chloroauric acid with sodium citrate in the presence of PLL-b-PNIPAM. PNIPAM-PLL-AuNPs and its precursors were thoroughly characterized by proton magnetic resonance spectroscope, Fourier transform infrared spectroscope, UV-vis spectroscope, transmission electron microscopy, dynamic light scattering, thermogravimetric analysis, and circular dichroism. The obtained PNIPAM-PLL-AuNPs exhibited high colloid stability even at strong alkaline (pH = 12) and acidic (pH = 2) conditions. The thermal and pH dual-responsive behaviors of the grafting PLL-b-PNIPAM chains was observed to be affected by AuNPs, while not for the secondary structure of PLL chains. Correspondingly, the surface plasmon resonance (SPR) of AuNPs was found to be sensitive to both pH value and temperature. A blue shift in the SPR happened both with increasing pH value and increasing temperature. The stimuli-response was reversible in heating-cooling cycles. The gold nanoparticles with both pH and temperature response may have potential applications in biomedical areas and biosensors.

[Chondrogenic and ameliorated inflammatory effects of chitosan-based biomimetic scaffold loaded with icariin].

Icariin (ICA) is a small molecule drug capable of promoting cartilage repair and ameliorating inflammation. Loading ICA into a biomaterial scaffold for cartilage tissue engineering will thus potentially enhance the biological functionality of the engineered scaffold. In this study, short fibers processed from electrospun poly(l-lactide-co-caprolactone) (PLCL) fibers which were prior coated with polydopamine (PDA), were mixed with citric acid doped chitosan solution (CC) for preparing short fibers reinforced chitosan hydrogel (PDA@PLCL/CC) by a freeze-thawing combined freeze-drying method. Thereafter, ICA was loaded into the PDA@PLCL/CC scaffold through physical adsorption to generate a newly engineered biomimetic cartilage scaffold (ICA-PDA@PLCL/CC). Finally, ICA-mediated chondrogenic and ameliorated inflammatory effects of the ICA-PDA@PLCL/CC scaffold were examined in vitro using rabbit chondrocytes. The results showed that the ICA-free PDA@PLCL/CC scaffold possessed appropriate pore size and porosity (> 80%), high water absorbance capacity and improved mechanical performance, and also promoted chondrocyte proliferation and adhesion. The ICA-laden ICA-PDA@PLCL/CC scaffold was evidenced to maintain cytomorphology, upregulate the expression of chondrogenic gene (sox-9), glycosaminoglycan gene (gag), and type Ⅱ collagen gene (col Ⅱ) as well as the synthesis of the cartilage matrix. In the presence of a simulated inflammation, the ICA-PDA@PLCL/CC scaffold was found to reduce chondrocyte fibrosis, effectively downregulate the expression of proinflammatory factors interleukin-6 (il-6), interleukin-1 (il-1), and inducible nitric oxide synthase (inos) in chondrocytes. It can also reduce matrix metalloproteinase-3 (mmp-3) expression and promote the synthesis of the extracellular matrix glycosaminoglycan (GAG) and type II collagen (Col II). The newly developed ICA-PDA@PLCL/CC scaffold may find applications in the regeneration and repair of cartilage defects.

Voluntary biting behavior as a functional measure of orofacial pain in mice.

INTRODUCTION: Pain-related behavior secondary to masticatory function can be assessed with the rodent bite force model. A reduction of the bite force has been shown to be related to pain associated with the masseter muscle and jaw activity, while an increase in bite force suggests improvement of muscle function and less pain. To evaluate the usefulness of the bite force measure in studying long-lasting orofacial pain we analyzed biting parameters during prolonged myofascial pain induced by ligation injury of the masseter muscle tendon (TL) in mice. METHODS: C57Bl/6 mice were habituated to bite at a pair of aluminum plates attached to a force displacement transducer. The transduced voltage signals were amplified and converted to force through calibration with a standard weight set. Voluntary biting behavior was recorded for 100 s/session and those with bite forces ≥980 mN were analyzed. Nociception was also verified with von Frey, conditioned place avoidance (CPA) tests and mouse grimace scale. Persistent orofacial pain was induced with unilateral ligation of one tendon of the masseter muscle (TL). RESULTS: To reduce interference of random bites of smaller forces, the top 5 or 15 bite forces (BF5/15) were chosen as a measure of masticatory function and related to pain behavior. Both male and female mice exhibited similar BF5/15. For the first nascent test of all mice, mean bite force was significantly and positively correlated with the body weight. However, this correlation was less clear in the latter tests (2-8 w). TL induced a reduction of BF5/15 that peaked at 1 w and returned to the baseline within 3 w. The von Frey and CPA tests indicated that mechanical allodynia/hyperalgesia persisted at the time when the BF had returned to the pre-injury level. Infusion of pain-relieving bone marrow stromal cells improved biting behavior in both male and female mice as shown by significantly increased BF5/15, compared to vehicle-treated mice. CONCLUSIONS: Mouse voluntary biting behavior can be reliably measured and quantified with a simplified setup. The bite force showed an inverse relationship with the level of pain after TL and was improved by pain-relieving manipulations. However, the injury-induced reduction of bite force peaked early and did not parallel with other measures of nociception in the later phase of hyperalgesia. The results suggest that multiple factors such as the level of habituation, cognitive motive, physical status, and feeding drive may affect random voluntary biting and confound the biting parameters related to maintained hyperalgesia.

Assessment of personal noise exposure of overhead-traveling crane drivers in steel-rolling mills.

BACKGROUND: Noise is widespread occupational hazard in iron and steel industry. Overhead-traveling cranes are widely used in this industry, but few studies characterized the overhead-traveling crane drivers' noise exposure level so far. In this study, we assessed and characterized personal noise exposure levels of overhead-traveling crane drivers in two steel-rolling mills. METHODS: One hundred and twenty-four overhead-traveling crane drivers, 76 in the cold steel-rolling mill and 48 in the hot steel-rolling mill, were enrolled in the study. Personal noise dosimeters (AIHUA Instruments Model AWA5610e, Hangzhou, China) were used to collect full-shift noise exposure data from all the participants. Crane drivers carried dosimeters with microphones placed near their collars during the work shifts. Work logs had been taken by the drivers simultaneously. Personal noise exposure data were divided into segments based on lines in which they worked. All statistical analyses were done using SPSS 13.0. RESULTS: The average personal noise exposure (L(Aeq.8h)) of overhead-traveling crane drivers in the hot steel-rolling mills ((85.03 +/- 2.25) dB (A)) was higher than that in the cold one ((83.05 +/- 2.93) dB (A), P < 0.001). There were 17 overhead traveling cranes in the hot steel-rolling mill and 24 cranes in the cold one, of which carrying capacities varied from 15 tons to 100 tons. The average noise exposure level based on different lines in the hot and cold steel-rolling mills were (85.2 +/- 2.61) dB (A) and (83.3 +/- 3.10) dB (A) respectively (P = 0.001), which were similar to the average personal noise exposure in both mills. The noise exposure levels were different among different lines (P = 0.021). CONCLUSION: Noise exposure levels, depending upon background noise levels and the noise levels on the ground, are inconstant. As the noise exposure levels are above the 85 dB (A) criteria, these drivers should be involved in the Hearing Conservation Program to protect their hearing.

Is polymeric substrate in influent an indirect impetus for the nitrification process in an activated sludge system?

Different from monomeric substrate, polymeric substrate (PS) needs to undergo slow hydrolysis process before becoming available for consumption by bacteria. Hydrolysis products will be available for the heterotrophs in low concentration, which will reduce competitive advantages of heterotrophs to nitrifiers in mixed culture. Therefore, some links between PS and nitrification process can be expected. In this study, three lab-scale sequencing batch reactors with different PS/total substrate (TS) ratio (0, 0.5 or 1) in influent were performed in parallel to investigate the influence of PS on nitrification process in activated sludge system. The results showed that with the increase of PS/TS ratio, apparent sludge yields decreased, while NO3--N concentration in effluent increased. The change of PS/TS ratio in influent also altered the cycle behaviors of activated sludge. With the increase of PS/TS ratio from 0 to 0.5 and 1, the ammonium and nitrite utilization rate increased ∼2 and 3 times, respectively. The q-PCR results showed that the abundance of nitrifiers in activated sludge for PS/TS ratio of 0.5 and 1 were 0.7-0.8 and 1.4-1.5 orders of magnitude higher than that for PS/TS ratio of 0. However, the abundance of total bacteria decreased about 0.5 orders of magnitude from the former two to the latter. The FISH observation confirmed that the nitrifiers' microcolony became bigger and more robust with the increase of PS/TS ratio. This paper paves a path to understand the role of PS/TS in affecting the nitrification process in biological wastewater treatment systems.

The important implications of particulate substrate in determining the physicochemical characteristics of extracellular polymeric substances (EPS) in activated sludge.

Since the notable amount of particulate substrate in wastewater, the implications of particulate substrate on treatment efficiency have been a topic of major interest in the field of biological wastewater treatment. The particulate substrate has to be hydrolyzed by the extracellular enzymes, which are mainly embedded in extracellular polymeric substances (EPS) matrix of microbial aggregates, prior to consumption. Therefore, the important relevance between the particulate substrate and the characteristics of EPS can be expected. In this study, two lab-scale sequencing batch reactors were performed in parallel to investigate the effects of particulate and soluble substrate on the physicochemical characteristics of EPS in activated sludge. The results showed that the particulate substrate in the influent could significantly change the properties of activated sludge and the characteristics of EPS. More open and fluffy flocs with poorer settleability and dewaterability were formed with particulate substrate. More protein and humic compounds were introduced into the EPS matrix due to the deep involvement of protein and humic compounds in hydrolysis process of particulate substrate. The increments of protein and humic compounds then caused the slight higher molecular weight, higher hydrophobicity and lower zeta potential of EPS in particulate substrate system. The results in this study permitted for obtaining answers to understand the significant implications of particulate substrate in determining the physicochemical characteristics of EPS in biological wastewater treatment systems.

A new classification paradigm of extracellular polymeric substances (EPS) in activated sludge: separation and characterization of exopolymers between floc level and microcolony level.

Extracellular polymeric substances (EPS) play a crucial role in the formation of activated sludge flocs. However, until now, the EPS are rather classified by the method used for extraction than by a theoretical consideration of their function and composition. In this paper, a new classification paradigm of EPS was proposed, which offered a novel approach to identify the role of EPS in the formation of activated sludge flocs. The current study gave an exploration to distinguish the EPS in the floc level (extra-microcolony polymers, EMPS) and in the microcolony level (extra-cellular polymers, ECPS). It was found that cation exchange resin treatment is efficient to disintegrate the flocs for EMPS extraction, however, inefficient to disaggregate the microcolonies for ECPS harvesting. A two-steps extraction strategy (cation exchange resin treatment followed by ultrasonication-high speed centrifugation treatment) was suggested to separate these two types of EPS in activated sludge flocs and the physicochemical characteristics of EMPS and ECPS were compared. The protein/polysaccharide ratio of ECPS was higher than that of EMPS and the molecular weight of proteins in EMPS and ECPS were found to be different. The ECPS contained higher molecular weight proteins and more hydrophobic substances than the EMPS contained. The result of excitation-emission matrix fluorescence spectroscopy analysis also showed that the EMPS and the ECPS have different fluorescent expressions and the components of EMPS were more diverse than that of ECPS. All results reported herein demonstrated that two different types of exopolymers exist in the activated sludge flocs and the inter-particle forces for aggregation of activated sludge flocs are not identical between the floc level and the microcolony level. It suggested that cation bridging interactions are more crucial in floc level flocculation, while the entanglement and hydrophobic interactions are more important in microcolony level cohesion.

The impact of sialic acids on the pharmacokinetics of a PEGylated erythropoietin.

Erythropoietin (EPO) is an important molecule in the erythropoiesis and various forms of EPO have been marketed in managing anemia in humans. Long acting EPOs for less frequent dosing have been generated either by increasing the number of glycosylation sites of the EPO molecule or by linking it to a polyethylene glycol (PEG). We have generated recombinant human EPO (rhEPO) using glycoengineered Pichia pastoris strains and evaluated the pharmacokinetics (PK) in rats of this molecule linked to a 40 kDa PEG (PEGylated rhEPO), in relation to its glycosylation patterns. As expected, the PEGylated rhEPO exhibited a significant improvement in half-life of serum when compared with the non-PEGylated version. Interestingly, the PK properties of the PEGylated rhEPO molecule were also significantly influenced by the glycosylation profile. Specifically, PEGylated rhEPO with a significantly higher sialic acid content in the biantennary structure (high A2) exhibited lower systemic clearance and higher systemic exposure than those with a lower sialic acid content (low A2) following either intravenous or subcutaneous administrations. These results suggest that A2 content may be one of the important criteria for release in manufacturing PEGylated rhEPO to ensure consistent PK.

Optimization of erythropoietin production with controlled glycosylation-PEGylated erythropoietin produced in glycoengineered Pichia pastoris.

Pichia pastoris is a methylotropic yeast that has gained great importance as an organism for protein expression in recent years. Here, we report the expression of recombinant human erythropoietin (rhEPO) in glycoengineered P. pastoris. We show that glycosylation fidelity is maintained in fermentation volumes spanning six orders of magnitude and that the protein can be purified to high homogeneity. In order to increase the half-life of rhEPO, the purified protein was coupled to polyethylene glycol (PEG) and then compared to the currently marketed erythropoiesis stimulating agent, Aranesp(®) (darbepoetin). In in vitro cell proliferation assays the PEGylated protein was slightly, and the non-PEGylated protein was significantly more active than comparator. Pharmacodynamics as well as pharmacokinetic activity of PEGylated rhEPO in animals was comparable to that of Aranesp(®). Taken together, our results show that glycoengineered P. pastoris is a suitable production host for rhEPO, yielding an active biologic that is comparable to those produced in current mammalian host systems.