CsPAT1, a GRAS transcription factor, promotes lignin accumulation by antagonistic interacting with CsWRKY13 in tea plants.

Lignin is an important component of plant cell walls and plays crucial roles in the essential agronomic traits of tea quality and tenderness. However, the molecular mechanisms underlying the regulation of lignin biosynthesis in tea plants remain unclear. CsWRKY13 acts as a negative regulator of lignin biosynthesis in tea plants. In this study, we identified a GRAS transcription factor, phytochrome A signal transduction 1 (CsPAT1), that interacts with CsWRKY13. Silencing CsPAT1 expression in tea plants and heterologous overexpression in Arabidopsis demonstrated that CsPAT1 positively regulates lignin accumulation. Further investigation revealed that CsWRKY13 directly binds to the promoters of CsPAL and CsC4H and suppresses transcription of CsPAL and CsC4H. CsPAT1 indirectly affects the promoter activities of CsPAL and CsC4H by interacting with CsWRKY13, thereby facilitating lignin biosynthesis in tea plants. Compared with the expression of CsWRKY13 alone, the co-expression of CsPAT1 and CsWRKY13 in Oryza sativa significantly increased lignin biosynthesis. Conversely, compared with the expression of CsPAT1 alone, the co-expression of CsPAT1 and CsWRKY13 in O. sativa significantly reduced lignin accumulation. These results demonstrated the antagonistic regulation of the lignin biosynthesis pathway by CsPAT1 and CsWRKY13. These findings improve our understanding of lignin biosynthesis mechanisms in tea plants and provide insights into the role of the GRAS transcription factor family in lignin accumulation.

Outcome of chairside CAD/CAM ceramic restorations on endodontically treated posterior teeth: a prospective study.

OBJECTIVE: The aim of this study was to evaluate the outcome and risk factors for chairside CAD/CAM full cusp coverage restorations on endodontically treated posterior teeth after 3 years of follow-up. METHODS: A total of 245 endodontically treated posterior teeth of 224 patients were included and restored with CAD/CAM full cusp coverage all-ceramic restorations according to a standardized protocol. Patients were recalled after treatments 1 to 3 years and underwent clinical and radiological examinations. At recall, modified FDI criteria were used to determine treatment outcomes by 2 evaluators. Success was determined when FDI scores were 1-2, and failure was indicated when FDI scores were 5. Logistic regression analysis was performed to evaluate potential risk factors. RESULTS: A total of 183 patients presented at recall, and the clinical outcomes of 201 teeth were analyzed with a recall rate of 82.0% for teeth and 81.7% for patients after 1-3 years of follow-up.185 of 201 teeth were found to have FDI scores of 1-2, and the success rate was 92%. No teeth were extracted during the follow-up period. Fourteen failed cases with an FDI score of 5 presented restoration dislocation, fracture of restoration or/and tooth. Logistic regression analysis revealed that oral parafunction (OR 2.281, 95% CI 2.2 ~ 47.5, P value 0.01) was a risk factor for success rate. CONCLUSION: Chairside CAD/CAM all-ceramic full cusp coverage restoration was (could be) a promising alternative for restoring endodontically treated posterior teeth.

PINK1-mediated mitophagy reduced inflammatory responses to Porphyromonas gingivalis in macrophages.

OBJECTIVE: Mitochondria are strained by microbial stimuli in the periodontal niche. Damaged mitochondria are cleared by mitophagy. The purpose of the study was to explore whether mitophagy participated in the progress of periodontitis and whether activation of mitophagy can inhibit inflammatory responses to bacterial infection in macrophages. METHODS: Mitophagy-related genes were measured in the healthy and inflamed human gingiva. Bone marrow-derived macrophages (BMDMs) were infected with Porphyromonas gingivalis. Dexmedetomidine, urolithin A, and resveratrol were used to activate mitophagy, while small interference RNA was utilized to knock down PTEN-induced putative protein kinase 1 (PINK1). Activation of mitophagy-related genes and colocalization of them were detected by Western blot and confocal imaging. Damages of mitochondria, accumulation of mitochondrial reactive oxygen species (mtROS), and production of IL-1ß, IL-6, and TNF-α were measured. RESULTS: Levels of mitophagy-related genes were decreased in inflamed periodontal tissues and P. gingivalis-infected BMDMs. Dexmedetomidine, urolithin A, and resveratrol activated mitophagy, leading to reduced mitochondria damages, decreased mtROS generation, and inhibited IL-1ß, IL-6, and TNF-α production. PINK1 knockdown reduced dexmedetomidine, urolithin A, and resveratrol-induced anti-inflammatory effect. CONCLUSION: Inhibited mitophagy participated in the progress of periodontitis. Activation of mitophagy may become a therapeutic target during the progress of periodontitis by reducing mtROS.

Hexokinase 2-mediated glycolysis supports inflammatory responses to Porphyromonas gingivalis in gingival fibroblasts.

BACKGROUND: When infected with Porphyromonas gingivalis, gingival fibroblasts undergo metabolic reprogramming, and rely on aerobic glycolysis rather than oxidative phosphorylation for rapid energy replenishment. Hexokinases (HKs) are catalysts for glucose metabolism, and HK2 constitutes the major HK inducible isoform. The objective of this study is to determine whether HK2-mediated glycolysis promotes inflammatory responses in inflamed gingiva. METHODS: Levels of glycolysis-related genes were assessed in normal and inflamed gingiva. Human gingival fibroblasts were harvested and infected with Porphyromonas gingivalis in order to mimic periodontal inflammation. 2-deoxy-d-glucose, an analogue of glucose, was used to block HK2-mediated glycolysis, while small interfering RNA was used to knock down HK2 expression. The mRNA and protein levels of genes were analyzed by real-time quantitative PCR and western blotting, respectively. HK2 activity and lactate production were assessed by ELISA. Cell proliferation was assessed by confocal microscopy. The generation of reactive oxygen species was assessed by flow cytometry. RESULTS: Elevated expression of HK2 and 6-phosphofructo-2-kinase/fructose-2,6-biphosphatase 3 was observed in the inflamed gingiva. P. gingivalis infection was shown to promote glycolysis in human gingival fibroblasts, as evidenced by increased gene transcription of HK2 and 6-phosphofructo-2-kinase/fructose-2,6-biphosphatase 3, cell glucose consumption, and HK2 activity. Inhibition and knockdown of HK2 resulted in reduced cytokine production, cell proliferation, and reactive oxygen species generation. Furthermore, P. gingivalis infection activated the hypoxia-inducible factor-1α signaling pathway, thus promoting HK2-mediated glycolysis and proinflammatory responses. CONCLUSIONS: HK2-mediated glycolysis promotes inflammatory responses in gingival tissues, and therefore glycolysis can be targeted in order to inhibit the progression of periodontal inflammation.

A novel periodontal endoscopy-aided non-incisional periodontal regeneration technique in the treatment of intrabony defects: a retrospective cohort study.

BACKGROUND: Gingival recession and post-operation discomfort are still a problem for patients receiving the periodontal regeneration surgery for intra-bony defects. To further reduce the trauma and the post-operation gingival recession, a novel periodontal endoscopy-aided non-incisional regeneration technique (NIT) was proposed in the treatment of intra-bony defects. METHODS: Retrospective analysis of 21 subjects treated with NIT and 21 subjects with periodontal endoscopy-aided scaling and root planing (PSRP) at baseline and 1-year evaluation was conducted. After removing the subgingival calculus and granulation tissue, bone grafting materials were placed into intrabony defects with the assistance of a gingival retractor in the NIT group. Probing depth (PD), gingival recession (GR), clinical attachment level (CAL), as well as the distance between bone crest (BC) level and base of the defect (BD) (intrabony defect depth, IBD) were evaluated at baseline and 1 year after treatment. RESULTS: At 1-year follow-up, the value of CAL, PD and IBD were statistically significant different compared with baseline in both two groups (p<0.001). CAL gain (p = 0.012) and PD reduction (p = 0.004) was greater in the NIT than PSRP. However, no difference in the IBD reduction was found between the NIT group and PSRP. Better CAL gain and PD reduction was achieved in the 1-year term in the NIT when compared with PSRP. CONCLUSION: NIT have resulted in significant gains in both clinical and radiographic parameters. NIT might be utilized as an alternative of the surgical treatment for periodontal intrabony defects. TRIAL REGISTRATION: This clinical trial registration was registered retrospectively (August 3, 2023) and the number is ChiCTR2300074317.

Protein-polymer mixtures in the colloid limit: Aggregation, sedimentation, and crystallization.

While proteins have been treated as particles with a spherically symmetric interaction, of course in reality, the situation is rather more complex. A simple step toward higher complexity is to treat the proteins as non-spherical particles and that is the approach we pursue here. We investigate the phase behavior of the enhanced green fluorescent protein (eGFP) under the addition of a non-adsorbing polymer, polyethylene glycol. From small angle x-ray scattering, we infer that the eGFP undergoes dimerization and we treat the dimers as spherocylinders with aspect ratio L/D - 1 = 1.05. Despite the complex nature of the proteins, we find that the phase behavior is similar to that of hard spherocylinders with an ideal polymer depletant, exhibiting aggregation and, in a small region of the phase diagram, crystallization. By comparing our measurements of the onset of aggregation with predictions for hard colloids and ideal polymers [S. V. Savenko and M. Dijkstra, J. Chem. Phys. 124, 234902 (2006) and Lo Verso et al., Phys. Rev. E 73, 061407 (2006)], we find good agreement, which suggests that the behavior of the eGFP is consistent with that of hard spherocylinders and ideal polymers.

Combined Transcriptomic and Metabolomic Analysis Reveals the Role of Phenylpropanoid Biosynthesis Pathway in the Salt Tolerance Process of Sophora alopecuroides.

Salt stress is the main abiotic stress that limits crop yield and agricultural development. Therefore, it is imperative to study the effects of salt stress on plants and the mechanisms through which plants respond to salt stress. In this study, we used transcriptomics and metabolomics to explore the effects of salt stress on Sophora alopecuroides. We found that salt stress incurred significant gene expression and metabolite changes at 0, 4, 24, 48, and 72 h. The integrated transcriptomic and metabolomic analysis revealed that the differentially expressed genes (DEGs) and differential metabolites (DMs) obtained in the phenylpropanoid biosynthesis pathway were significantly correlated under salt stress. Of these, 28 DEGs and seven DMs were involved in lignin synthesis and 23 DEGs and seven DMs were involved in flavonoid synthesis. Under salt stress, the expression of genes and metabolites related to lignin and flavonoid synthesis changed significantly. Lignin and flavonoids may participate in the removal of reactive oxygen species (ROS) in the root tissue of S. alopecuroides and reduced the damage caused under salt stress. Our research provides new ideas and genetic resources to study the mechanism of plant responses to salt stress and further improve the salt tolerance of plants.

Generation and periodontal differentiation of human gingival fibroblasts-derived integration-free induced pluripotent stem cells.

Induced pluripotent stem cells (iPSCs) have been recognized as a promising cell source for periodontal tissue regeneration. However, the conventional virus-based reprogramming approach is associated with a high risk of genetic mutation and limits their therapeutic utility. Here, we successfully generated iPSCs from readily accessible human gingival fibroblasts (hGFs) through an integration-free and feeder-free approach via delivery of reprogramming factors of Oct4, Sox2, Klf4, L-myc, Lin28 and TP53 shRNA with episomal plasmid vectors. The iPSCs presented similar morphology and proliferation characteristics as embryonic stem cells (ESCs), and expressed pluripotent markers including Oct4, Tra181, Nanog and SSEA-4. Additionally, these cells maintained a normal karyotype and showed decreased CpG methylation ratio in the promoter regions of Oct4 and Nanog. In vivo teratoma formation assay revealed the development of tissues representative of three germ layers, confirming the acquisition of pluripotency. Furthermore, treatment of the iPSCs in vitro with enamel matrix derivative (EMD) or growth/differentiation factor-5 (GDF-5) significantly up-regulated the expression of periodontal tissue markers associated with bone, periodontal ligament and cementum respectively. Taken together, our data demonstrate that hGFs are a valuable cell source for generating integration-free iPSCs, which could be sequentially induced toward periodontal cells under the treatment of EMD and GDF-5.

MAT2A inhibition suppresses inflammation in Porphyromonas gingivalis-infected human gingival fibroblasts.

Background: Methionine adenosyl transferase II alpha (MAT2A) is the key enzyme to transform methionine into S-adenosylmethionine (SAM), the main methylgroup donor involved in the methylation. The purpose of our study wasto explore whether MAT2A-mediated methionine metabolism affected theexpression of inflammatory cytokines in human gingival fibroblasts(hGFs). Methods: Both healthy and inflamed human gingiva were collected. HGFs werecultured and treated with P. gingivalis, with or without MAT2Ainhibitor (PF9366), small interference RNA (siRNA), or extrinsic SAMpretreatment. The levels of inflammatory cytokines were detected byreal-time PCR, western blotting, and ELISA. SAM levels were detectedby ELISA. The nuclear factor-kappa B (NF-κB) and mitogen-activatedprotein kinase (MAPK) pathway was explored by western blotting. Results: The expression of MAT2A was increased in the inflamed tissues. P.gingivalis infection promoted the expression of MAT2A and SAM inhGFs. Meanwhile, PF9366 and MAT2A-knockdown significantly decreasedexpression of inflammatory cytokines and SAM production. PF9366inhibited activation of NF-κB/MAPK pathway in P. gingivalis-treatedhGFs. Conclusions: MAT2A-mediated methionine metabolism promoted P. gingivalis-inducedinflammation in hGFs. Targeting MAT2A may provide a novel therapeuticmethod for modulating periodontitis.

Improved lipase performance by covalent immobilization of Candida antarctica lipase B on amino acid modified microcrystalline cellulose as green renewable support.

Development of immobilized lipase with excellent catalytic performance and low cost is the major challenge for large-scale industrial applications. In this study, green renewable microcrystalline cellulose (MCC) that was hydrophobically modified with D-alanine (Ala) or L-lysine (Lys) was used for immobilizing Candida antarctica lipase B (CALB). The improved catalytic properties were investigated by experimental and computational methods. CALB immobilized on MCC-Ala with higher hydrophobicity showed better catalytic activity than CALB@MCC-Lys because the increased flexibility of the lid region of CALB@MCC-Ala favored the formation of open conformation. Additionally, the low root mean square deviation and the high ß-sheet and α-helix contents of CALB@MCC-Ala indicated that the structure became more stable, leading to a significantly enhanced stability (54.80% and 90.90% relative activity at 70 °C and pH 9.0, respectively) and good reusability (48.92% activity after 5 cycles). This study provides a promising avenue to develop immobilized lipase with high catalytic properties for industry applications.

[A novel periodontal endoscopy-aided non-incisional periodontal regeneration technique：a case series study].

PURPOSE: To investigate the effect of endoscopy-aided non-incisional periodontal regeneration technique (NIT) in the treatment of alveolar bone angular resorption. METHODS: Thirteen patients with severe periodontitis(13 diseased teeth) were selected. All patients had alveolar bone angular resorption on adjacent surface. The patients received NIT treatment 6 weeks after periodontal primary therapy. The visualization of subgingival environment was acquired by the periodontal endoscopy. Following the removal of the subgingival plaque, calculus and intra-bony granulation tissue, bone grafting materials were placed into the intra-bony defects with the assistance of a delicate gingival protector. No flap was elevated and no sutures were applied. Probing depth (PD), gingival recession (GR), clinical attachment level (CAL), as well as radiographic parameters were evaluated at baseline and 2 years after treatment. SPSS 22.0 software package was used for data analysis. RESULTS: At 2-years follow-up, an average CAL gain of (3.65±2.10) mm (P＜0.001), PD reduction of (4.42±1.66) mm (P＜0.001), and minimal increase in GR of (0.38±0.87) mm (P=0.25) were observed. Alveolar bone was significantly improved at 2-years follow-up on radiographs (P＜0.001). CONCLUSIONS: For angular resorption site of alveolar bone, NIT treatment can obtain good periodontal regeneration results without flap inversion.

In vitro research of oral microscope-assisted implant surface decontamination.

OBJECTIVES: To investigate the effect of oral microscope-assisted surface decontamination on implants in vitro. METHODS: Twelve implants that fell off because of severe peri-implantitis were collected, and decontamination was carried out on the surfaces of implants through curetting, ultrasound, titanium brushing, and sandblasting at 1×, 8×, or 12.8× magnifications. The number and sizes of residues on the implants' surfaces after decontamination were determined, and the decontamination effect was analyzed according to the thread spacing in the different parts of the thread. RESULTS: 1) The 8× and 12.8× groups scored lower for implant surface residues than the 1× group (P<0.000 1), and the 12.8× group scored lower than the 8× group (P<0.001); 2) no difference in residue score was found between the wide and narrow thread pitch (P>0.05), and the 8× and 12.8× groups had lower scores than the 1× group (P<0.001); 3) the lowest number of contaminants was observed at the tip of the thread, whereas the highest was observed below the thread, and the difference was significant (P<0.001). However, the thread pitch had no effect on the number of contaminants in different areas (P>0.05); 4) the residue scores of the 8× and 12.8× groups were lower than those of the 1× group at the thread tip and above, sag, and below the thread of the implants (P<0.05). CONCLUSIONS: Residues on the surfaces of contaminated implants can be effectively removed by using an oral microscope. After decontamination, the residues of pollutants were mainly concentrated below the thread of the implants, and the thread pitch of the implants had no significant effect on the residues.

Trade-off of abiotic stress response in floating macrophytes as affected by nanoplastic enrichment.

Nanoparticles have been found in large-scale environmental media in recent years, causing toxic effects in various organisms and even humans through food chain transmission. The ecotoxicological impact of microplastics on specific organisms is currently receiving much attention. However, relatively little research to date has examined the mechanisms through which nanoplastic residue may exert an interference effect on floating macrophytes in constructed wetlands. In our study, the aquatic plant Eichhornia crassipes was subjected to 100 nm polystyrene nanoplastics at concentrations of 0.1, 1 and 10 mg L-1 after 28 days of exposure. E. crassipes can decrease the concentration of nanoplastics in water by 61.42∼90.81% through phytostabilization. The abiotic stress of nanoplastics on the phenotypic plasticity (morphological and photosynthetic properties and antioxidant systems as well as molecular metabolism) of E. crassipes was assessed. The presence of nanoplastics reduced the biomass (10.66%∼22.05%), and the functional organ (petiole) diameters of E. crassipes decreased by 7.38%. The photosynthetic efficiency was determined, showing that the photosynthetic systems of E. crassipes are very sensitive to stress by nanoplastics at a concentration of 10 mg L-1. Oxidative stress and imbalance of antioxidant systems in functional organs are associated with multiple pressure modes from nanoplastic concentrations. The catalase contents of roots increased by 151.19% in the 10 mg L-1 treatment groups compared with the control group. Moreover, 10 mg L-1 concentrations of the nanoplastic pollutant interfere with purine and lysine metabolism in the root system. The hypoxanthine content was reduced by 6.58∼8.32% under exposure to different concentrations of nanoplastics. In the pentose phosphate pathway, the phosphoric acid content was decreased by 32.70% at 10 mg L-1 PS-NPs. In the pentose phosphate pathway, the phosphoric acid content was decreased by 32.70% at 10 mg L-1 PS-NPs. Nanoplastics disturb the efficiency of water purification by floating macrophytes, which reduces the chemical oxygen demand (COD) removal efficiency (from 73% to 31.33%) due to various abiotic stresses. This study provided important information for further clarifying the impact of nanoplastics on the stress response of floating macrophytes.

Gold-silver alloy hollow nanoshells-based lateral flow immunoassay for colorimetric, photothermal, and SERS tri-mode detection of SARS-CoV-2 neutralizing antibody.

Although many approaches have been developed for the quick assessment of SARS-CoV-2 infection, few of them are devoted to the detection of the neutralizing antibody, which is essential for assessing the effectiveness of vaccines. Herein, we developed a tri-mode lateral flow immunoassay (LFIA) platform based on gold-silver alloy hollow nanoshells (Au-Ag HNSs) for the sensitive and accurate quantification of neutralizing antibodies. By tuning the shell-to-core ratio, the surface plasmon resonance (SPR) absorption band of the Au-Ag HNSs is located within the near infrared (NIR) region, endowing them with an excellent photothermal effect under the irradiation of optical maser at 808 nm. Further, the Raman reporter molecule 4-mercaptobenzoic acid (MBA) was immobilized on the gold-silver alloy nanoshell to obtain an enhanced SERS signal. Thus, these Au-Ag HNSs could provide colorimetric, photothermal and SERS signals, with which, tri-mode strips for SARS-CoV-2 neutralizing antibody detection were constructed by competitive immunoassay. Since these three kinds of signals could complement one another, a more accurate detection was achieved. The tri-mode LFIA achieved a quantitative detection with detection limit of 20 ng/mL. Moreover, it also successfully detected the serum samples from 98 vaccinated volunteers with 79 positive results, exhibiting great application value in neutralizing antibody detection.

Exogenous methyl jasmonate and cytokinin antagonistically regulate lignin biosynthesis by mediating CsHCT expression in Camellia sinensis.

Tea plant, an important beverage crop, is cultivated worldwide. Lignification can improve the hardness of tea plant, which is of great significance for tea quality. Jasmonates (JAs) and cytokinin are plant hormones that control processes of plant development and secondary metabolite accumulation. Hydroxycinnamoyl-CoA shikimate/quinate hydroxycinnamoyl transferase (HCT) is primarily involved in lignin biosynthesis. The effects of exogenous application of JAs and cytokinin on lignin biosynthesis and related HCT gene expression profiles in tea plants are still unclear. In order to investigate the effects of exogenous JAs and cytokinin on lignin accumulation, anatomical structures, and CsHCT gene profiles in tea plants, we treated tea plants with methyl jasmonate (MeJA) and cytokinin (6-BA). MeJA and 6-BA treatments triggered the lignification at 6 and 12 d in tea leaves. The combined treatment resulted in an increase in lignin content at 6 d, which was 1.32 times of that at 0 d for 'Mengshan 9.' The CsHCTs in clade 2 (CsHCT5, CsHCT6, CsHCT7, and CsHCT8) were mainly expressed in leaves. We found that exogenous MeJA and cytokinin might be able to antagonistically regulate tea plant lignin accumulation through the mediation of CsHCT expression. This study revealed that HCTs play potential important roles involved in lignin biosynthesis of tea plant development and hormonal stimuli.

Hexokinase 2-mediated glycolysis promotes receptor activator of NF-κB ligand expression in Porphyromonas gingivalis lipopolysaccharide-treated osteoblasts.

BACKGROUND: Glucose metabolism plays a pivotal role in sustaining the inflammatory response to microbial stimulation by providing sufficient energy in immune cells. The main purpose of our study was to explore whether hexokinase 2 (HK2)-mediated glycolysis affected the expression of receptor activator of NF-κB Ligand (RANKL) in Porphyromonas gingivalis lipopolysaccharide (P. gingivalis-LPS)-treated osteoblasts and evaluate the potential involvement of the AKT/PI3K pathway activation during HK2-mediated glycolysis. METHODS: Primary mice osteoblasts were treated with P. gingivalis-LPS, whereas the HK2 inhibitor (Lonidamine, LND) and small interference RNA were used to restrain HK2 expression. Conditioned medium from osteoblasts was utilized for culturing osteoclast precursors. The mRNA and protein levels of genes involved in glycolysis and bone metabolism including RANKL and osteoprotegerin (OPG) were detected by real-time PCR and western blotting. HK2 and lactate levels were detected by ELISA. Tartrate-resistant acid phosphatase (TRAP) staining was utilized to assess osteoclast formation. The involvement of the AKT/PI3K pathway in osteoblasts was explored by Western blotting. RESULTS: P. gingivalis-LPS enhanced HK2 expression along with rising glycolysis in osteoblasts. LND and HK2-knockdown decreased RANKL expression and the RANKL/OPG ratio in osteoblasts, leading to less osteoclast formation from osteoclast precursors as evidenced by TRAP staining, while the osteogenic potential and proliferation of osteoblasts were not affected by HK2-knockdown. Moreover, P. gingivalis-LPS activated the AKT/PI3K pathway, which could regulate HK2 and RANKL expression in osteoblasts. CONCLUSIONS: HK2-mediated glycolysis promoted RANKL in osteoblasts and enhanced osteoclast differentiation. Targeting glycolysis may provide novel therapeutic methods for reducing alveolar bone loss.

A self-healing and self-adhesive chitosan based ion-conducting hydrogel sensor by ultrafast polymerization.

Recently, owing to the wide applications in electronic skin and human activity monitoring, flexible hydrogel strain sensors have attracted great attention. And the better preparation with more efficient is always common aspiration. In this work, acrylamide (AM) was in situ polymerized in chitosan (CS) matrix to prepare hydrogels (PAM@CS). Inspired by the adhesion of natural mussels, plant polyphenol tannic acid (TA) was introduced into the system, Fe3+ was also introduced as redox agent to perform an ultrafast polymerization, and the composite hydrogel PAM@CS/TA-Fe can be prepared at 60 °C within 1 min. The hydrogels are ion conductive and show good sensing performance in detecting major and subtle body motions. Benefiting from the multiple dynamic noncovalent bonds, the PAM@CS/TA-Fe hydrogels also show excellent adhesion performance and good self-healing property, which would expand their application range in wearable and flexible electronic equipment.

Tribological behavior of cellulose nanocrystal as an eco-friendly additive in lithium-based greases.

The development of eco-friendly lubricant additives is of great significance for environmental protection. In this study, cellulose nanocrystal (CNC) was prepared and added into four lithium-based greases with different consistencies and apparent viscosities. The results suggest that the concentration of doped CNC should be limited to a certain value (5 wt% to 10 wt% depending on the grease type) to avoid excessive variation on the basic physical properties of greases. In the pristine grease with low consistency (NLGI grade 1) the incorporated CNC could be effectively transported through the fibrous network and deposited on the sliding surface. Through the surface mending and protection by CNC additive, together with the strong hydrodynamic effect of the high viscous base oil (220 cSt at 40 °C), the biggest reduction of friction and wear was achieved by 16% and 29% respectively. This study reveals the lubrication mechanism and application strategy of CNC in greases.

Individualized 3D-Printed Bone-Anchored Maxillary Protraction Device for Growth Modification in Skeletal Class III Malocclusion.

Bone-anchored maxillary protraction (BAMP) is effective for skeletal Class III malocclusion. However, infection, screw and plate loosening, and device failures occur with conventional plates. This pilot prospective study analyzed the feasibility of individualized BAMP using preoperative simulation and 3D titanium printing in patients referred by the orthodontic department for four BAMP miniplates. Preoperative cone beam computed tomography data were analyzed using CAD/CAM software to fabricate the individualized 3D-printed BAMP device. The customized plates were printed using selective laser sintering and inserted onto the bone through an adjunct transfer jig. The accuracy of preoperative simulation and actual placement of the BAMP device were tested by superimposing simulated positioned digital images and postoperative computed tomography data. The growth modification effect depended on superimposition of lateral cephalograms and comparative changes in SNA, SNB, ANB, and Wits. Two male patients were finally included in the study. BAMP decreased the ANB difference (-4.56 to -1.09) and Wits appraisal (-7.52 to -3.26) after 2 years. Normal measurement indices for sagittal and vertical growth indicated successful growth modification. The mean accuracy between preoperative simulation and actual surgery was 0.1081 ± 0.5074 mm. This treatment modality involving preoperative simulation and 3D titanium printing for fabricating and placing customized BAMP devices precisely at planned locations is effective for treating skeletal Class III malocclusion.

3D-printed titanium implant with pre-mounted dental implants for mandible reconstruction: a case report.

BACKGROUND: This clinical case presented a novel method of segmental mandible reconstruction using 3D-printed titanium implant with pre-mounted dental implants that was planned to rehabilitate occlusion. CASE PRESENTATION: A 53-year-old male who suffered osteoradionecrosis due to the radiation after squamous cell carcinoma resection. The 3D-printed titanium implant with pre-mounted dental implant fixtures was simulated and fabricated with selective laser melting method. The implant was successfully inserted, and the discontinuous mandible defect was rehabilitated without postoperative infection or foreign body reaction during follow-ups, until a year. CONCLUSIONS: The 3D-printed titanium implant would be the one of the suitable treatment modalities for mandible reconstruction considering all the aspect of mandibular functions.