Development of a competitive chemiluminescence immunoassay using a monoclonal antibody recognizing 3B of foot-and-mouth disease virus for the rapid detection of antibodies induced by FMDV infection.

BACKGROUND: Foot-and-mouth disease (FMD) is a devastating animal disease. Anti-non-structural protein (NSP) antibody detection is very important for confirming suspected cases, evaluating the prevalence of infection, certifying animals for trade and controlling the disease. METHODS: In this study, a competitive chemiluminescence immunoassay (3B-cCLIA) was developed for the rapid detection of antibodies against NSPs in different species of livestock animals using the monoclonal antibody (mAb) 9E2 as a competitive antibody that recognizes NSP 3B. RESULTS: The cut-off value (50%), diagnostic sensitivity (Dsn) (97.20%, 95.71%, and 96.15%) and diagnostic specificity (Dsp) (99.51%, 99.43%, and 98.36) of the assay were estimated by testing a panel of known-background sera from swine, cattle and sheep, respectively. The accuracy rate of the 3B-cCLIA was further validated and subsequently compared with that of two commercial diagnostic kits. The early diagnostic results showed that antibodies recognizing NSPs developed later (approximately 1-2 days) than antibodies recognizing structural proteins. Furthermore, anti-NSP antibody presence in animals vaccinated multiple times (false positives), especially cattle and sheep, was confirmed, and the false-positive rate increased with the number of vaccinations. CONCLUSIONS: These results indicate that the 3B-cCLIA is suitable for the rapid detection of antibodies against FMDV NSP 3B in a wide range of species.

Glycosylation of DMP1 maintains cranial sutures in mice.

Craniosynostosis, a severe craniofacial developmental disease, can only be treated with surgery currently. Recent studies have shown that proteoglycans are involved in the suture development. For the bone matrix protein, dentin matrix protein 1 (DMP1), glycosylation on the N-terminal of it could generate a functional proteoglycan form of DMP1 during osteogenesis. We identified that the proteoglycan form of DMP1 (DMP1-PG) is highly expressed in mineralisation front of suture. But, the potential role of DMP1-PG in suture fusion remain unclear. To investigate the role of DMP1-PG in cranial suture fusion and craniofacial bone development. By using a DMP1 glycosylation site mutation mouse model, DMP1-S89G mice, we compared the suture development in it with control mice. We compared the suture phenotypes, bone formation rate, expression levels of bone formation markers in vivo between DMP1-S89G mice and wild-type mice. Meanwhile, cell culture and organ culture were performed to detect the differences in cell differentiation and suture fusion in vitro. Finally, chondroitin sulphate (CHS), as functional component of DMP1-PG, was employed to test whether it could delay the premature suture fusion and the abnormal differentiation of bone mesenchymal stem cells (BMSCs) of DMP1-PG mice. DMP1-S89G mice had premature closure of suture and shorter skull size. Lack of DMP1-PG accelerated bone formation in cranial suture. DMP1-PG maintained the essential stemness of BMSCs in suture through blocking the premature differentiation of BMSCs to osteoblasts. Finally, chondroitin sulphate, a major component of DMP1-PG, successfully delayed the premature suture fusion by organ culture of skull in vitro. DMP1-PG could inhibit premature fusion of cranial suture and maintain the suture through regulating the osteogenic differentiation of BMSCs.

Pectin from Citrus Canning Wastewater as Potential Fat Replacer in Ice Cream.

Pectin had been recovered from canning wastewater produced by chemical treatment of segment membrane during preparation of canned citrus in our previous research. The purpose of this study was to characterize the extracted pectin from canning wastewater, and to evaluate its application as a fat alternative to replace fat in ice cream. The monosaccharide composition and rheological properties of the pectin were determined. The influences of fat reduction and pectin addition on the physicochemical, rheological and sensory properties of low-fat ice cream were determined. The rheological results showed that pectin solutions were typical pseudoplastic fluids. The addition of pectin in ice cream can cause an increase in viscosity, overrun, and hardness, and a decrease in meltdown of the ice cream. When 0.72% pectin (w/w) is incorporated into ice cream, a prototype product of ice cream with 45% lower fat content compared to the control was made. Results indicated that their qualities such as appearance, flavor, and taste were not significantly different. The low-fat ice cream had higher smoothness scores and lower mouth-coating scores. Hence, pectin extracted from citrus canning wastewater can be potentially used as fat replacer in ice cream, which benefits both the environment and the food industry.

Ploidy effect and genetic architecture exploration of stalk traits using DH and its corresponding haploid populations in maize.

BACKGROUND: Doubled haploid (DH) lines produced via in vivo haploid induction have become indispensable in maize research and practical breeding, so it is important to understand traits characteristics in DH and its corresponding haploids which derived from each DH lines. In this study, a DH population derived from Zheng58 × Chang7-2 and a haploid population, were developed, genotyped and evaluated to investigate genetic architecture of eight stalk traits, especially rind penetrometer resistance (RPR) and in vitro dry matter digestion (IVDMD), which affecting maize stalk lodging-resistance and feeding values, respectively. RESULTS: Phenotypic correlation coefficients ranged from 0.38 to 0.69 between the two populations for eight stalk traits. Heritability values of all stalk traits ranged from 0.49 to 0.81 in the DH population, and 0.58 to 0.89 in the haploid population. Quantitative trait loci (QTL) mapping study showed that a total of 47 QTL for all traits accounting for genetic variations ranging from 1.6 to 36.5% were detected in two populations. One or more QTL sharing common region for each trait were detected between two different ploidy populations. Potential candidate genes predicated from the four QTL support intervals for RPR and IVDMD were indirectly or directly involved with cellulose and lignin biosynthesis, which participated in cell wall formation. The increased expression levels of lignin and cellulose synthesis key genes in the haploid situation illustrated that dosage compensation may account for genome dosage effect in our study. CONCLUSIONS: The current investigation extended understanding about the genetic basis of stalk traits and correlations between DH and its haploid populations, which showed consistence and difference between them in phenotype, QTL characters, and gene expression. The higher heritabilities and partly higher QTL detection power were presented in haploid population than in DH population. All of which described above could lay a preliminary foundation for genetic architecture study with haploid population and may benefit selection in haploid-stage to reduce cost in DH breeding.

Insight on the in vivo wear characteristics of goat artificial cervical disc implanted for 6 months.

Since the prosthesis may suffer overload or extreme motion during the daily activities, some special failure modes may be found in service. In order to give an insight on the in vivo stability of artificial cervical disc, the wear characteristics of goat prosthesis were studied after implanted in goat animal for 6 months. The prosthesis was designed with a ball-on-socket structure under the material combination of PE-on-TC4. The X-ray examination was performed to monitor the in vivo wear process. The worn morphology and wear debris were analyzed in detail by EDX and SEM. The result indicated that goat prosthesis revealed good safety and effectiveness during 6-month in vivo wear test. The wear damage occurred only on nucleus pulposus component with the dominant failure mode of surface fatigue and deformation. The damage distribution and wear severity was seriously uneven with a trend that the closer to the edge, the more severe the wear. For example, slippage phenomenon caused a wide and curved severe ploughing damage on the edge. Three kinds of debris were found including bone debris, carbon-oxygen compound debris and PE wear debris. Both bone debris and carbon-oxygen compound debris came from superior endplate while PE wear debris came from nucleus pulposus. The debris proportion for endplate was 82% for bone debris, 15% for carbon-oxygen compound debris and 3% for PE debris while for nucleus pulposus it was 8% for carbon-oxygen compound debris and 92% for PE debris. The size range of PE debris for nucleus pulposus was 0.1-100 µm, with an average size of 9.58 ± 16.34 µm. For the bone debris of endplate components, the size range was 0.1-600 µm, with an average size of 49.18 ± 94.54 µm. After wear test, the equivalent elastic modulus of nucleus pulposus increased from 28.55 MPa to 38.25 MPa. The results of FT-IR spectrum showed that the functional groups on the surface of polyethylene have not changed significantly after wear test. The results indicated that there were some differences in wear characteristics of wear morphology and wear debris between in vivo wear and in vitro wear.

Design of synthetic collagens that assemble into supramolecular banded fibers as a functional biomaterial testbed.

Collagens are the most abundant proteins of the extracellular matrix, and the hierarchical folding and supramolecular assembly of collagens into banded fibers is essential for mediating cell-matrix interactions and tissue mechanics. Collagen extracted from animal tissues is a valuable commodity, but suffers from safety and purity issues, limiting its biomaterials applications. Synthetic collagen biomaterials could address these issues, but their construction requires molecular-level control of folding and supramolecular assembly into ordered banded fibers, comparable to those of natural collagens. Here, we show an innovative class of banded fiber-forming synthetic collagens that recapitulate the morphology and some biological properties of natural collagens. The synthetic collagens comprise a functional-driver module that is flanked by adhesive modules that effectively promote their supramolecular assembly. Multiscale simulations support a plausible molecular-level mechanism of supramolecular assembly, allowing precise design of banded fiber morphology. We also experimentally demonstrate that synthetic fibers stimulate osteoblast differentiation at levels comparable to natural collagen. This work thus deepens understanding of collagen biology and disease by providing a ready source of safe, functional biomaterials that bridge the current gap between the simplicity of peptide biophysical models and the complexity of in vivo animal systems.

Use of the BCR sequential extraction procedure for the study of metal availability to plants.

To investigate the mobility and availability of metals from soil to plant, concentrations of zinc (Zn), copper (Cu), lead (Pb), cadmium (Cd), mercury (Hg) and arsenic (As) in topsoils and plants (lettuce, scallion, celery, tomato, carambola, wampee and longan) collected from the area around a petrochemical complex in Guangzhou, China, were analyzed. The modified European Community Bureau of Reference (BCR) three-step sequential extraction procedure was applied to determine the concentration of metal fractions in soils. The results showed that the distribution of Zn, Cu, Pb and Cd in four fractions varied greatly among the soil samples, and 18.8% of vegetable and fruit samples for Cd and 5.8% for Pb exceeded the maximum permissible levels in food of China. Soil-to-plant transfer coefficients were in the order of Cd>Zn>Cu>Hg>As>Pb, suggesting Cd being the most mobile and available to plants among the metals studied. Principal component analysis indicated that metal fractions and soil physicochemical properties (pH, organic matter, cation exchange capacity, clay content and electrical conductivity) affected metal uptake by plants. Furthermore, atmospheric deposition may be another important factor for the accumulation of metals in plants.

[Effect of invisalign on anterior and posterior upper airway and maxillary bone changes in the treatment of high-angle skeletal Class â ¡ malocclusion].

PURPOSE: To investigate the effect of invisalign on anterior and posterior upper airway and maxillary bone changes in the treatment of high-angle skeletal Class II malocclusion. METHODS: Thirty-seven patients with malocclusion undergoing invisible orthodontic treatment in Hospital of Stomatology of Xi'an Jiaotong University from June 2016 to June 2018 were enrolled. Before and 18 months after correction, the correction effect was evaluated. Cone-beam CT (CBCT) was performed to measure the upper airway volume and tongue position. Cephalometric examination was performed to determine the anteroposterious diameter of the upper airway and the position of hyoid bone. The pre-therapy and post-treatment facial profile images of patients and stars were graded by 0-10 numerical rating scale. SPSS 20.0 software package was used to analyze the data. RESULTS: After correction, oropharyngeal volume, glossopharyngeal volume and minimum cross-sectional area of upper airway significantly increased(P<0.05). Sagittal diameter of the upper airway at mandibular plane significantly increased after correction (P<0.05). After correction, ANB angle, GoGn-SN angle, OPP-SN angle, Y-axis angle, UI-SN angle, UI-PP angle, UI-AP angle, and UI-AP distance significantly decreased, SNB angle and UI- LI angle significantly increased(P<0.05). The aesthetics scores of facial profile images significantly increased after correlation(P<0.05), which was significantly lower than that of the stars(P<0.05). CONCLUSIONS: Invisalign can effectively correct open upper airway and malocclusion, achieving better treatment results and satisfactory facial aesthetics effect.

LncRNA Nron regulates osteoclastogenesis during orthodontic bone resorption.

Activation of osteoclasts during orthodontic tooth treatment is a prerequisite for alveolar bone resorption and tooth movement. However, the key regulatory molecules involved in osteoclastogenesis during this process remain unclear. Long noncoding RNAs (lncRNAs) are a newly identified class of functional RNAs that regulate cellular processes, such as gene expression and translation regulation. Recently, lncRNAs have been reported to be involved in osteogenesis and bone formation. However, as the most abundant noncoding RNAs in vivo, the potential regulatory role of lncRNAs in osteoclast formation and bone resorption urgently needs to be clarified. We recently found that the lncRNA Nron (long noncoding RNA repressor of the nuclear factor of activated T cells) is highly expressed in osteoclast precursors. Nron is downregulated during osteoclastogenesis and bone ageing. To further determine whether Nron regulates osteoclast activity during orthodontic treatment, osteoclastic Nron transgenic (Nron cTG) and osteoclastic knockout (Nron CKO) mouse models were generated. When Nron was overexpressed, the orthodontic tooth movement rate was reduced. In addition, the number of osteoclasts decreased, and the activity of osteoclasts was inhibited. Mechanistically, Nron controlled the maturation of osteoclasts by regulating NFATc1 nuclear translocation. In contrast, by deleting Nron specifically in osteoclasts, tooth movement speed increased in Nron CKO mice. These results indicate that lncRNAs could be potential targets to regulate osteoclastogenesis and orthodontic tooth movement speed in the clinic in the future.

[Hydroxyapatite particulate artificial bone for repairing sunken deformation of frontal bone following removal of dermoid cyst].

OBJECTIVE: To investigate aesthetic outcomes and postoperative complications of hydroxyapatite particulate artificial bone for repairing sunken deformation of frontal bone following removal of dermoid cyst. METHODS: From February 2000 to May 2005, hydroxyapatite particulate artificial bone was used to repair the sunken deformation of frontal bone in 13 cases (9 males and 4 females), and the age of the patients was from 17 to 41 years. The dermoid cysts were all found during infant period, and the length and width of the cysts ranged from 6 cm x 4 cm to 10 cm x 8 cm. An incision along the hair-edge or tumor margin was made to excise the dermoid cyst in the forehead. After complete removal of dermoid cyst, the sunken frontal bone was examined and repaired with hydroxyapatite particulate artificial bone. The clinical check-up and X-ray examination were utilized to determine aesthetic outcomes and postoperative complications at 1 week, 1 month and 6 months after operation. RESULTS: The primary wound healing was obtained in all patients postoperatively, and no complications such as hematoma, infection, recurrence of dermoid cysts or displacement of hydroxyapatite particulate artificial bone were observed. With a follow-up from 1 to 20 months, all sunken deformations were completely repaired with satisfactorily aesthetic outcomes. Through clinical check-up and X-ray examination, the implants were found to integrate with the frontal bones without any gaps and displacement. CONCLUSION: It is a simple and viable method to repair sunken deformation of frontal bone with hydroxyapatite particulate artificial bone.