Mechanical loading and autophagy: A study on the BoNT-A injection-induced condylar cartilage degeneration.

Botulinum toxin A (BoNT-A) has emerged as a treatment option for temporomandibular disorder (TMD). By injecting BoNT-A into the masseter muscle, it is possible to reduce mechanical loading on the temporomandibular joint (TMJ). However, numerous prior studies have indicated excessive reduction in mechanical loading can have detrimental effects on TMJ cartilage. This study proposes that autophagy, a process influenced by mechanical loading, could play a role in BoNT-A-induced mandibular condyle cartilage degeneration. To explore this hypothesis, we employed both BoNT-A injection and an excessive biting model to induce variations in mechanical loading on the condyle cartilage of C57BL/6 mice, thereby simulating an increase and decrease in mechanical loading, respectively. Results showed a significant reduction in cartilage thickness and downregulation of Runt-related transcription factor 2 (Runx2) expression in chondrocytes following BoNT-A injection. In vitro experiments demonstrated that the reduction of Runx2 expression in chondrocytes is associated with autophagy, possibly dependent on decreased YAP expression induced by low mechanical loading. This study reveals the potential involvement of the YAP/LC3/Runx2 signaling pathway in BoNT-A mediated mandibular condylar cartilage degeneration.

The effects of lingual buttons, precision cuts, and patient-specific attachments during maxillary molar distalization with clear aligners: Comparison of finite element analysis.

INTRODUCTION: This study aimed to analyze the biomechanical effects of the combined use of clear aligners (CA) and auxiliaries (precision cuts, lingual buttons, and patient-specific attachments) on mesial tipping and extrusion of the premolars during maxillary molars distalization. METHODS: Three-dimensional finite element method was employed to simulate clinical scenarios of CA with different auxiliaries for molar distalization. As such, 200 g of distal force was applied to the microimplants from the notches, lingual buttons, and hooks. Orthodontic tooth movement and the hydrostatic pressure in the periodontal ligament were compared. RESULTS: Adding auxiliaries can provide the maxillary arch anchorage and promote the distal tipping of premolars and retroclination of maxillary incisors. In contrast, this effect was more pronounced in patient-specific attachment applications than in other types of auxiliaries. The independent application of the CA caused mesial tipping and extrusion of the premolar and also caused the incisor proclination. CONCLUSIONS: The anchorage loss caused by the CA alone could be alleviated with the assistance of auxiliaries. Notably, patient-specific attachments further reinforce the anchorage of the anterior arch by incorporating anchor teeth as 1 anchorage unit.

Nanotube-decorated hierarchical tantalum scaffold promoted early osseointegration.

This study aimed to fabricate a hierarchical tantalum scaffold mimicking natural bone structure to enhance osseointegration. Porous tantalum scaffolds (p-Ta) with microgradients were fabricated by selective laser melting according to a computer-aided design model. Electrochemical anodization produced nanotubes on the p-Ta surface (p-Ta-nt). SEM verified the construction of a unique nanostructure on p-Ta-nt. Contact angle and protein adsorption measurements demonstrated that p-Ta-nt have enhanced hydrophilicity and protein absorption. MC3T3-E1 preosteoblasts showed increased filamentous pseudopods and comparable cell proliferation when cultured on p-Ta-nt. Osteogenic marker gene (Osterix, Runx2, COL-I) transcription was significantly upregulated in MC3T3-E1 cells cultured on p-Ta-nt after 7 days. After implantation into the femurs of New Zealand white rabbits for 2 weeks, histological examination found improved early osseointegration in the p-Ta-nt group. This study showed that a hierarchical tantalum structure could enhance early osteogenic effects in vitro and in vivo.

Temporal and spatial effects on C-reactive protein's regulation of inducible nitric oxide synthase production in periodontal disease.

BACKGROUND: Inducible nitric oxide synthase (iNOS) is associated with inflammation and osteoclastic differentiation in periodontal disease. This study was conducted to compare the time-dependent variation in iNOS production between the gingiva and other periodontal tissues and to explore the potential association with C-reactive protein (CRP) in early periodontal disease. METHODS: Ligature-induced periodontal disease models (0-14 days) were established in wild-type and CRP knockout rats. Changes in CRP, iNOS, and autophagy levels were examined in the gingiva and other periodontal tissues. Macrophages were treated with lipopolysaccharide and chloroquine to explore the role of autophagy in iNOS production. iNOS, CRP, and autophagy-related proteins were analyzed using Western blotting, immunostaining, and enzyme-linked immunosorbent assays. mRNA expression was detected by quantitative real-time polymerase chain reaction. Hematoxylin and eosin staining was used for histological analysis. Cathepsin K immunostaining and microcomputed tomography of the maxillae were performed to compare alveolar bone resorption. RESULTS: iNOS and CRP levels increased rapidly in periodontal tissues, as observed on Day 2 of ligature, then decreased more rapidly in the gingiva than in other periodontal tissues. CRP deficiency did not prevent iNOS generation, but effectively accelerated iNOS reduction and delayed alveolar bone loss. The CRP effect on iNOS was accompanied by a change in autophagy, which was reduced by CRP knockout. CONCLUSIONS: The regulation of iNOS by CRP shows temporospatial variation in early periodontal disease and is potentially associated with autophagy. These findings may contribute to the early detection and targeted treatment of periodontal disease.

Catechol-Modified and MnO2-Nanozyme-Reinforced Hydrogel with Improved Antioxidant and Antibacterial Capacity for Periodontitis Treatment.

Periodontitis is an inflammatory disease characterized by tooth loss and alveolar bone resorption. Bacteria are the original cause of periodontitis, and excess reactive oxygen species (ROS) encourage and intensify inflammation. In this study, a mussel-inspired and MnO2 NPs-reinforced adhesive hydrogel capable of alleviating periodontitis with improved antibacterial and antioxidant abilities was developed. The hydrogel was created by combining polyvinyl alcohol (PVA), 3,4-dihydroxy-d-phenylalanine (DOPA), and MnO2 nanoparticles (NPs) (named PDMO hydrogel). The hydrogel was demonstrated to be able to scavenge various free radicals (including total ROS─O2•- and OH•) and relieve the hypoxia in an inflammatory microenvironment by scavenging excess ROS and generating O2 due to its superoxide dismutase (SOD)/catalase (CAT)-like activity. Besides, under 808 nm near-infrared (NIR) light, the photothermal performance of the PDMO hydrogel displayed favorable antibacterial and antibiofilm effects toward Escherichia coli, Staphylococcus aureus, and Porphyromonas gingivalis (up to nearly 100% antibacterial rate). Furthermore, the PDMO hydrogel exhibited favorable therapeutic efficacy in alleviating gingivitis in Sprague-Dawley rats, even comparable to or better than the commercial PERIO. In addition, in the periodontitis models, the PDMO2 group showed the height of the residual alveolar bone and the smallest shadow area of low density among other groups, indicating the positive role of the PDMO2 hydrogel in bone regeneration. Finally, the biosafety of the PDMO hydrogel was comprehensively investigated, and the hydrogel was demonstrated to have good biocompatibility. Therefore, the developed PDMO hydrogel provided an effective solution to resolve biofilm recolonization and oxidative stress in periodontitis and could be a superior candidate for local drug delivery system in the clinical management of periodontitis with great potential for future clinical translation.

Nanotopography on titanium promotes osteogenesis via autophagy-mediated signaling between YAP and ß-catenin.

Nanostructured titanium implants are recognized for inducing osteogenesis, but the cell signal transductions related to topography are not fully understood. Implant topography is associated with the functionality of osteogenic transcription factors directed by ß-catenin in the nucleus, and autophagic flux in the cytoplasm; YAP (Yes-associated protein) is implicated in the destruction of ß-catenin in the cytoplasm and is susceptible to autophagic flux. This study investigated whether surface topography of the titanium implant modulates autophagy-lysosome degradation of cytoplasmic YAP. Titanium surfaces were modified with smooth, micro, or nanotopographies. Compared with the smooth and micro surfaces, nanotopography was associated with higher ß-catenin nuclear translocation, osteogenic differentiation, and autophagy, and less cytoplasmic YAP. Blockade of the autophagy-lysosome pathway resulted in YAP retention in MC3T3-E1 cells. Cytoplasmic YAP restricted ß-catenin nuclear translocation. In the nano surface group, ß-catenin accumulation in the nucleus and expression of osteogenesis genes was improved. However, in the absence of cell-cell (confluent) contact, manipulation of YAP and ß-catenin localization associated with topography-induced autophagy was lost. In summary, the osteogenesis observed in response to titanium implants with nanotopography involves a signaling link between YAP and ß-catenin. STATEMENT OF SIGNIFICANCE: Titanium with rough topographical surfaces is extensively applied in orthopedic and dental clinics. However, the cellular response to topographies that promotes osteogenesis and underlying mechanisms are not fully understood. In this study, we modified titanium surfaces to produce smooth, micro, or nano topographies. Experiments indicated that the nanotopography induced a stronger autophagic response, leading to degraded cytoplasmic YAP. With the lower levels of YAP, ß-catenin transported and accumulated in the nucleus to activate TCF/LEF transcription factors, resulting in stronger osteogenesis. Additionally, cell-cell contact was essential in the autophagy-mediated signaling link between YAP and ß-catenin. Consequently, our investigation revealed a novel signal transduction in nanotopography-regulated osteogenesis, and supports the modification of biomaterial surfaces to maximize osseointegration.

Effects of Programmed Local Delivery from a Micro/Nano-Hierarchical Surface on Titanium Implant on Infection Clearance and Osteogenic Induction in an Infected Bone Defect.

The two major causes for implant failure are postoperative infection and poor osteogenesis. Initial period of osteointegration is regulated by immunocytes and osteogenic-related cells resulting in inflammatory response and tissue healing. The healing phase can be influenced by various environmental factors and biological cascade effect. To synthetically orchestrate bone-promoting factors on biomaterial surface, built is a dual delivery system coated on a titanium surface (abbreviated as AH-Sr-AgNPs). The results show that this programmed delivery system can release Ag+ and Sr2+ in a temporal-spatial manner to clear pathogens and activate preosteoblast differentiation partially through manipulating the polarization of macrophages. Both in vitro and in vivo assays show that AH-Sr-AgNPs-modified surface renders a microenvironment adverse for bacterial survival and favorable for macrophage polarization (M2), which further promotes the differentiation of preosteoblasts. Infected New Zealand rabbit femoral metaphysis defect model is used to confirm the osteogenic property of AH-Sr-AgNPs implants through micro-CT, histological, and histomorphometric analyses. These findings demonstrate that the programmed surface with dual delivery of Sr2+ and Ag+ has the potential of achieving an enhanced osteogenic outcome through favorable immunoregulation.

Robust biomimetic-structural superhydrophobic surface on aluminum alloy.

The following facile approach has been developed to prepare a biomimetic-structural superhydrophobic surface with high stabilities and strong resistances on 2024 Al alloy that are robust to harsh environments. First, a simple hydrothermal treatment in a La(NO3)3 aqueous solution was used to fabricate ginkgo-leaf like nanostructures, resulting in a superhydrophilic surface on 2024 Al. Then a low-surface-energy compound, dodecafluoroheptyl-propyl-trimethoxylsilane (Actyflon-G502), was used to modify the superhydrophilic 2024 Al, changing the surface character from superhydrophilicity to superhydrophobicity. The water contact angle (WCA) of such a superhydrophobic surface reaches up to 160°, demonstrating excellent superhydrophobicity. Moreover, the as-prepared superhydrophobic surface shows high stabilities in air-storage, chemical and thermal environments, and has strong resistances to UV irradiation, corrosion, and abrasion. The WCAs of such a surface almost remain unchanged (160°) after storage in air for 80 days, exposure in 250 °C atmosphere for 24 h, and being exposed under UV irradiation for 24 h, are more than 144° whether in acidic or alkali medium, and are more than 150° after 48 h corrosion and after abrasion under 0.98 kPa for 1000 mm length. The remarkable durability of the as-prepared superhydrophobic surface can be attributed to its stable structure and composition, which are due to the existence of lanthanum (hydr)oxides in surface layer. The robustness of the as-prepared superhydrophobic surface to harsh environments will open their much wider applications. The fabricating approach for such robust superhydrophobic surface can be easily extended to other metals and alloys.

Water-only hydrothermal method: a generalized route for environmentally-benign and cost-effective construction of superhydrophilic surfaces with biomimetic micronanostructures on metals and alloys.

The present work demonstrates a generalized strategy using water-only hydrothermal oxidation to construct complex biomimetic micronanostructures on a series of metals and alloys, resulting in superhydrophilic surfaces. This general approach is environmentally-benign and cost-effective, which offers a unique clue for the rational fabrication of micronanoscale architectures and superhydrophilic surfaces.