Programmable melanoma-targeted radio-immunotherapy via fusogenic liposomes functionalized with multivariate-gated aptamer assemblies.

Radio-immunotherapy exploits the immunostimulatory features of ionizing radiation (IR) to enhance antitumor effects and offers emerging opportunities for treating invasive tumor indications such as melanoma. However, insufficient dose deposition and immunosuppressive microenvironment (TME) of solid tumors limit its efficacy. Here we report a programmable sequential therapeutic strategy based on multifunctional fusogenic liposomes (Lip@AUR-ACP-aptPD-L1) to overcome the intrinsic radio-immunotherapeutic resistance of solid tumors. Specifically, fusogenic liposomes are loaded with gold-containing Auranofin (AUR) and inserted with multivariate-gated aptamer assemblies (ACP) and PD-L1 aptamers in the lipid membrane, potentiating melanoma-targeted AUR delivery while transferring ACP onto cell surface through selective membrane fusion. AUR amplifies IR-induced immunogenic death of melanoma cells to release antigens and damage-associated molecular patterns such as adenosine triphosphate (ATP) for triggering adaptive antitumor immunity. AUR-sensitized radiotherapy also upregulates matrix metalloproteinase-2 (MMP-2) expression that combined with released ATP to activate ACP through an "and" logic operation-like process (AND-gate), thus triggering the in-situ release of engineered cytosine-phosphate-guanine aptamer-based immunoadjuvants (eCpG) for stimulating dendritic cell-mediated T cell priming. Furthermore, AUR inhibits tumor-intrinsic vascular endothelial growth factor signaling to suppress infiltration of immunosuppressive cells for fostering an anti-tumorigenic TME. This study offers an approach for solid tumor treatment in the clinics.

Built-up sodium alginate/chlorhexidine multilayer coating on dental implants with initiating anti-infection and cyto-compatibility sequentially for soft-tissue sealing.

Soft-tissue sealing at transmucosal sites is very important for preventing the invasion of pathogens and maintaining the long-term stability and function of dental implants. However, the colonization of oral pathogens on the implant surface and surrounding soft tissues can disturb the early establishment of soft-tissue sealing and even induce peri-implant infection. The purpose of this study was to construct two antibacterial coatings with 5 or 10 sodium alginate/chlorhexidine bilayers on titanium surfaces using layer-by-layer self-assembly technology to promote soft-tissue sealing. The corresponding chemical composition, surface topography, wettability and release behaviour were investigated to prove that the resultant coating of sodium alginate and chlorhexidine was coated on the porous titanium surface. In-vitro and in-vivo antibacterial results showed that both prepared coatings inhibited or killed the bacteria on their surfaces and the surrounding areas to prevent plaque biofilm formation, especially the coating with 10 bilayers. Although both coatings inhibited the initial adhesion of fibroblasts, the cytocompatibility gradually improved with coating degradation. More importantly, both coatings achieved cell adhesion and proliferation in an in-vitro bacterial environment and effectively alleviated bacteria-induced subcutaneous inflammation in-vivo. Therefore, this study demonstrated that the multilayered coating could prevent implant-related infections in the initial stage of implant surgery and then improve soft-tissue integration with implant devices.

Structurally dynamic self-healable hydrogel cooperatively inhibits intestinal inflammation and promotes mucosal repair for enhanced ulcerative colitis treatment.

Hydrogels are a class of biocompatible materials with versatile functions that have been increasing explored for the localized treatment of ulcerative colitis (UC), but various mechanical stimuli may cause premature hydrogel breakage and detachment, impeding their further clinical translation. Here we report a multifunctional mechanically-resilient self-healing hydrogel for effective UC treatment, which is synthesized through the host-guest interaction between dopamine/ß-cyclodextrin-modified hyaluronic acid (HA-CD-DA) and amantadine-modified carboxymethyl chitosan (CMCS-AD). The excessive ß-CD cavities allow the incorporation of dexamethasone (DEX), while the porous hydrogel network potentiates the encapsulation of basic fibroblast growth factor (bFGF) and L-alanyl-l-glutamine (ALG). DA moieties in HA components allow firm adhesion of the hydrogel to the ulcerative lesions after in-situ implantation, while the reversible host-guest interaction between CD and AD could enhance the persistence of hydrogel. The hydrogel demonstrated favorable biocompatibility and could continuously release DEX to induce M1-to-M2 repolarization of mucosal macrophages through inhibiting the toll-like receptor 4 (TLR4)-nuclear factor kappa-light-chain-enhancer of activated B cells (NF-κB) axis. Furthermore, the co-delivered bFGF and ALG facilitates the regeneration of ulcerative mucosa and restore its barrier functions to ameliorate UC symptoms. The mechanically resilient hydrogel offers an integrative approach for UC therapy in the clinics.

[Diagnosis and treatment of congenital submandibular duct dilatation].

OBJECTIVE: To study the clinical features and treatments of congenital submandibular duct dilatation. METHODS: Seven children with congenital submandibular duct dilatation from January 2008 to March 2018 were included in this study, whose average age was 5 months and 22 days. The clinical manifestations are unilateral swelling of the mouth floor. All seven children underwent sublingual gland resection, submandibular gland dilatation catheter resection, and catheter reroute under general anesthesia. Intraoperatively, the orifice of the submandibular gland was constricted and part of the catheter was dilated. RESULTS: All seven patients had good healing without swelling or cyst formation. CONCLUSIONS: Congenital submandibular duct dilatation occurs at a young age. Early diagnosis and treatment can help prevent further expansion of the catheter and avoid gland atrophy, feeding difficulty, and breathing obstruction. Simultaneous excision of the sublingual gland can avoid the formation of postoperative sublingual cyst.

Enhancement of local bone remodeling in osteoporotic rabbits by biomimic multilayered structures on Ti6Al4V implants.

To enhance long-term survival of titanium implants in patients with osteoporosis, chitosan/gelatin multilayers containing bone morphogenetic protein 2(BMP2) and an antiosteoporotic agent of calcitonin (CT) are deposited on the Ti6Al4V (TC4) implants through layer-by-layer (LBL) electrostatic assembly technique. Here, the obtained titanium alloy implant (TC4/LBL/CT/BMP2) can regulate the release of loaded calcitonin and BMP2 agents in a sustaining manner to accelerate the bone formation and simultaneously inhibit bone resorption. In vitro results show that the bone-related cells on TC4/LBL/CT/BMP2 present the lowest production level of tartrate resistant acid phosphatase (TRAP) but the highest (p < 0.05) level of alkaline phosphatase (ALP) activity, osteocalcin production, mineralization capacity and osteoblast-related gene expression among all groups after treatment for 7 or 21 days, respectively. Besides, in vivo studies of micro-CT analysis, routine histological and immunohistochemical analysis also collectively demonstrate that the TC4/LBL/CT/BMP2 implant can dramatically promote the formation and remodeling of new bone in osteoporotic rabbits after implantation for 30 days and 90 days, respectively. In vivo push-out testing further confirms that the TC4/LBL/CT/BMP2 implant has the highest (p < 0.01) interfacial shear strength and favorable bone-implant osseointegration. Overall, this study establishes a simple and profound methodology to fabricate a biofunctional TC4 implant for the treatment of local osteoporotic fractures in vivo. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1437-1451, 2016.

Construction of microenvironment onto titanium substrates to regulate the osteoblastic differentiation of bone marrow stromal cells in vitro and osteogenesis in vivo.

To mimic the extracellular matrix of natural bone, apatite/gelatin composite was deposited onto nanostructured titanium substrates via a coprecipitation method, which was pretreated by potassium hydroxide and heat treatment to generate an anticorrosive nanostructured layer. The successful formation of the apatite/gelatin nanocomposite onto titanium surfaces was revealed by Fourier transform infrared spectroscopy, field-emission scanning electron microscopy, atomic force microscopy (AFM), and thin film X-ray diffraction (TF-XRD) measurements, respectively. The immunofluorescence staining of vinculin revealed that the apatite/gelatin nanocomposite deposited titanium substrate was favorable for cell adhesion. More importantly, bone marrow stromal cells cultured onto the apatite/gelatin nanocomposite deposited titanium substrates displayed significantly higher (p < 0.05 or p < 0.01) proliferation and differentiation levels of alkaline phosphatase, mRNA expressions of osteocalcin (OC), osteopontin (OPN), and collagen type I (Col I), and OC content after culture for 7, 14, and 21 days, respectively, which was also revealed by the immunofluorescence analysis of OC and OPN expression. The deposition of apatite/gelatin nanocomposite improved bone density (p < 0.05) and bone-implant contact rate (p < 0.05), which was reflected by microcomputed tomography analysis and histological evaluation in vivo using a rabbit model. This work provides an approach to fabricate high-performance titanium-based implants with enhanced bone osseointegration.

Regulation of the differentiation of mesenchymal stem cells in vitro and osteogenesis in vivo by microenvironmental modification of titanium alloy surfaces.

To mimic the extracellular microenvironment of bone, a bioactive multilayered structure of gelatin/chitosan pair, containing bone morphogenetic protein 2(BMP2) and fibronectin (FN), was constructed onto Ti6Al4V surface via a layer-by-layer assembly technique. The successful fabrication of multilayered structure was confirmed by contact angle measurement, field emission scanning electron microscopy (FE-SEM) and confocal laser scanning microscopy (CLSM), respectively. Bioactive BMP2 released in a sustained manner along with the degradation of multilayered structure. MSCs grown onto the multilayer coated TC4 substrates displayed significantly higher (p < 0.01 or p < 0.05) production levels of alkaline phosphatase (ALP), mineralization and genes expressions of runt related transcription factor 2 (Runx2), osterix, osteocalcin (OC), osteopontin (OPN), ALP and collagen type Ⅰ(ColⅠ) compared to the controls after culture for 7 days and 21 days, respectively. More importantly, MicroCT analysis and histological observations demonstrated that the multilayer coated Ti6Al4V implants in vivo promoted the bone density and new bone formation around them after implantation for 4 weeks and 12 weeks, respectively. The results indicated that Ti6Al4V coated with biofunctional multilayers was beneficial for osteogenesis and integration of implant/bone. The study therefore presents an alternative to fabricate bio-functionalized Ti6Al4V-based implants for potential application in orthopedics field.