Determination of pepsin by capillary electrophoresis using mixed polymer coated capillary with switchable properties toward protein adsorption/desorption.

In this work, a simple online preconcentration method for quantitative detection of pepsin was realized by using the binary mixed polymer brushes coated capillary with switchable properties toward protein adsorption. Firstly, the binary mixed polymer brushes were prepared by grafting poly(2-methyl-2-oxazoline) and poly(4-vinylpyridine) onto the inner wall of the capillary through a polydopamine anchor. Then the coatings were characterized by X-ray photoelectron spectrometer and electroosmotic flow measurement. The results indicated that the composition of coating could be controlled by varying the feed ratio of poly(2-methyl-2-oxazoline) to poly(4-vinylpyridine) and the inner surface charge could be tuned toward the change of pH and ionic strength. The results showed that when the poly(2-methyl-2-oxazoline)/poly(4-vinylpyridine) mass ratio was 80/20, the highest online preconcentration effect was obtained and the sensitivity enhancement factor was 6.3. Moreover, satisfactory sensitivity (limit of detection: 7.5 ng/mL) and good repeatability were obtained with the online preconcentration method. The polymer-coated capillary was still stable for online preconcentration and detection of pepsin after 50 consecutive runs. Last, the proposed method was used successfully to online preconcentrate pepsin in the saliva matrix.

Online preconcentration of lysozyme in hen egg white using responsive polymer coating in CE.

A mixed polymer brushes material based on poly (2-methyl-2-oxazoline)- and poly (acrylic acid)-coated capillary with switchable protein adsorption/desorption properties was applied for online preconcentration of lysozyme in hen egg white during capillary electrophoresis performance. First, lysozyme in simulated egg white was successfully online preconcentrated and the detection signal of lysozyme was amplified. Ovalbumin, ovomucoid, and conalbumin in egg white were verified show negligible interference on the online preconcentration of lysozyme according to the study on electroosmotic flow mobility. Second, a series validation procedure was carried out to evaluate the proposed method performance. There was a good linearity behavior range from 0.1 to 5.0 ng/mL, limit of detection was 20 pg/mL, and limit of quantity was 50 pg/mL, the accuracy and robustness of this method were also excellent. Last, the proposed method has been successfully used to detect and analyze lysozyme in hen egg white, the determined amounts of lysozyme in hen egg white were consistent with reported normal levels and recoveries were in the range of 96.0-99.2%. After 75 consecutive runs, this prepared capillary was still stable for online preconcentration and determination of lysozyme in hen egg white without being affected by complex matrix.

On-line preconcentration and determination of sulfadiazine in food samples using surface molecularly imprinted polymer coating by capillary electrophoresis.

In this study, on-line preconcentration and selective determination of the trace sulfadiazine (SDZ) existing in milk and hen egg white samples were realized by the capillary electrophoresis using molecularly imprinted polymer (MIP) coated capillary. The capillary coated with MIP was firstly prepared through the surface imprinted techniques, using SDZ as template molecule and dopamine as function monomer and crosslinker, and then amine-terminated poly(2-methyl-2-oxazoline) (PMOXA-NH2) was introduced onto polydopamine layer to reduce the non-specific adsorption. Successful preparation of SDZ-MIP-PMOXA coating was verified by zeta potential, as well as water contact angle. The SDZ-MIP-PMOXA coated capillary performed well on-line preconcentration of SDZ and the obtained peak area of SDZ was 46 times higher than that one obtained in bare capillary using the same procedure. Then the proposed on-line preconcentration method was fully validated and displayed good linear behavior in the concentration from 5.0 to 100.0 ng/mL, with the limit of detection was low to 1.5 ng/mL; and this method presented excellent accuracy and robustness. The prepared SDZ-MIP-PMOXA coated capillary also showed high selectivity with the imprinting factor of 5.85 and good repeatability during five consecutive runs with the relative standard deviation value of peak area was 1.6%. At last, the application of the prepared SDZ-MIP-PMOXA coated capillary in the detection of SDZ in spiked food samples was investigated, and good recoveries of 98.7-109.3% were obtained.

Chitin nanowhisker-supported sulfonated poly(ether sulfone) proton exchange for fuel cell applications.

To balance the relationship among proton conductivity and mechanic strength of sulfonated poly(ether sulfone) (SPES) membrane, chitin nanowhisker-supported nanocomposite membranes were prepared by incorporating whiskers into SPES. The as-prepared chitin whiskers were prepared by 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) mediated oxidation of α-chitin from crab shells. The structure and properties of the composite membranes were examined as proton exchange membrane (PEM). Results showed that chitin nanowhiskers were dispersed incompactly in the SPES matrix. Thermal stability, mechanical properties, water uptake and proton conductivity of the nanocomposite films were improved from those of the pure SPES film with increasing whisker content, which ascribed to strong interactions between whiskers and between SPES molecules and chitin whiskers via hydrogen bonding. These indicated that composition of filler and matrix got good properties and whisker-supported membranes are promising materials for PEM.