The effects of land use types on microplastics in river water: A case study on the mainstream of the Wei River, China.

Microplastics are widely found in rivers and their sediments, which will cause harm to the water ecological environment. The Wei River is a first-class tributary of the Yellow River, the fifth largest river in the world, and has vulnerable ecological environment and most sediment in the world. However, understanding how anthropogenic activities and environmental factors affect the microplastics distribution in this river is not clear. Based on this, the spatiotemporal distribution of microplastics in the Wei River were investigated. The abundance of microplastics ranged from 1033 to 8333 items/m3 and from 120 to 840 items/kg in the water and in the sediment, respectively. Fibers and fragments were the main shapes of Wei River, microplastics less than 500 µm were the main sizes, and black and white/transparent were the main colors. In Wei River, the abundance of microplastics in urban areas was higher than that in agricultural areas and mountainous areas. Furthermore, the correlation analysis revealed that microplastic abundance in the water was related to anthropogenic activities (population density, per capita GDP and distance) and environmental factors (water temperature, NH3-N, ORP), while in the sediments was correlated with anthropogenic activities (per capita GDP) and environmental factors (water temperature and NH3-N). This study reveals new patterns in microplastic pollution in the Wei River, underscoring the need for targeted environmental strategies. Our findings provide novel insights into the characteristics and distribution of microplastics, significantly adding to the current understanding of riverine microplastic pollution.

Polysaccharide Nanofiber-Stabilized Pickering Emulsion Microparticles Induce Pyroptotic Cell Death in Hepatocytes and Kupffer Cells.

The intracellular uptake and interaction behavior of emulsion microparticles in liver cells critical to host defense and inflammation is significant to understanding their potential cytotoxicity and biomedical applications. In this study, the cell death responses of fibroblastic, hepatocyte, and Kupffer cells (KCs) induced by four types of emulsion particles that are stabilized by polysaccharide nanofibers (cellulose or chitin), an inorganic nanoparticle (ß-tricalcium phosphate), or surfactants are compared. Pickering emulsion (PE) microparticles stabilized by polysaccharide nanofibers or inorganic nanoparticles have a droplet size of 1-3 µm, while the surfactant-stabilized emulsion has a diameter of ≈190 nm. Polysaccharide nanofiber-stabilized PEs (PPEs) markedly induce lactate dehydrogenase release in all cell types. Additionally, characteristic pyroptotic cell death, which is accompanied by cell swelling, membrane blebbing, and caspase-1 activation, occurs in hepatocytes and KCs. These PE microparticles are co-cultured with lipopolysaccharide-primed KCs associated with cytokine interleukin-1ß release, and the PPEs demonstrate biological activity as a mediator of the inflammation response. Well-designed PPE microparticles induce pyroptosis of liver cells, which may provide new insight into regulating inflammation-related diseases for designing potent anticancer drugs and vaccine adjuvants.

Morphotropic Phase Boundary in Polarized Organic Piezoelectric Materials.

Designing the morphotropic phase boundary (MPB) has been the most sought-after approach to achieve high piezoelectric performance of piezoelectric materials. However, MPB has not yet been found in the polarized organic piezoelectric materials. Here, we discover MPB with biphasic competition of ß and 3/1-helical phases in the polarized piezoelectric polymer alloys (PVTC-PVT) and demonstrate a mechanism to induce MPB using the compositionally tailored intermolecular interaction. Consequently, PVTC-PVT exhibits a giant quasistatic piezoelectric coefficient of >32 pC/N while maintaining a low Young's modulus of 182 MPa, with a record-high figure of merit of piezoelectricity modulus of about 176 pC/(N·GPa) among all piezoelectric materials.

Role of PLGA Variability in Controlled Drug Release from Dexamethasone Intravitreal Implants.

Long-acting injectable formulations based on poly(lactide-co-glycolide) (PLGA) have been commercialized for over 30 years in at least 20 FDA-approved products. These formulations offer several advantages, including reduced dosing frequency, improved patient compliance, and maintenance of therapeutic levels of drug. Despite extensive studies, the inherent complexity of the PLGA copolymer still poses significant challenges associated with the development of generic formulations having drug release profiles equivalent to those of the reference listed drugs. In addition, small changes to PLGA physicochemical properties or the drug product manufacturing process can have a major impact on the drug release profile of these long-acting formulations. This work seeks to better understand how variability in the physicochemical properties of similar PLGAs affects drug release from PLGA solid implants using Ozurdex (dexamethasone intravitreal implant) as the model system. Four 50:50, acid-terminated PLGAs of similar molecular weights were used to prepare four dexamethasone intravitreal implants structurally equivalent to Ozurdex. The PLGAs were extensively characterized by using a variety of analytical techniques prior to implant manufacture using a continuous, hot-melt extrusion process. In vitro release testing of the four structurally equivalent implants was performed in both normal saline and phosphate-buffered saline (PBS), yielding drastically different results between the two methods. In normal saline, no differences in the release profiles were observed. In PBS, the drug release profiles were sensitive to small changes in the residual monomer content, carboxylic acid end group content, and blockiness of the polymers. This finding further underscores the need for a physiologically relevant in vitro release testing method as part of a robust quality control strategy for PLGA-based solid implant formulations.

Clinical investigation of gingival papilla recession after orthodontic treatment in adults.

OBJECTIVE: To investigate the incidence, severity, susceptibility sites of gingival papillary recession (GPR) in adults after orthodontic treatment and the clinical impact of tooth extraction on GPR. METHODS: A total of 82 adult patients were recruited and then divided into extraction and non-extraction groups according to whether the orthodontic teeth were extracted (teeth that needed to be extracted when performing orthodontic treatment). The gingival conditions of the two groups of patients before and after treatment were recorded using intraoral photos, and the incidence, severity and predilection sites of GPR after correction were investigated. RESULTS: The results indicated that GPR occurred in 29 patients after correction, with an incidence rate of 35.4%. A total of 1648 gingival papillae were recorded among the 82 patients after correction, of which 67 exhibited atrophy, with an incidence of 4.1%. All occurrences of GPR were classified as papilla presence index 2 (PPI 2) (mild). The condition is most likely to occur in the anterior tooth area, especially in the lower incisor area. The results indicated that the incidence of GPR was substantially higher in the extraction group than in the non-extraction group, with the difference statistically significant. CONCLUSION: Following orthodontic treatment, adult patients will have a certain proportion of mild GPR, which is more common in the anterior tooth area, especially the lower anterior tooth area.

A Dielectric Polymer/Metal Oxide Nanowire Composite for Self-Adaptive Charge Release.

Electrostatic discharge is a fatal threat to a variety of electronic products. Here we report on a polymer nanocomposite composed of a dielectric polymer embedded with aligned core-shell structured nanowires for highly efficient distributed electrostatic discharge protection. The dielectric nanocomposite is capable of self-adaptive charge release, stemming from the nonlinear interface built in the Bi/Co oxide coated ZnO nanowires that leads to a "hand-in-hand" double-Schottky barrier. The ultralow filler concentration (e.g., 0.5 vol %) endows the nanocomposite with low permittivity (close to the pristine polymer matrix) and high optical transmittance (75%) in the visible light wavelength range, which is desirable in packaging materials and display coatings for portable electronics. The effectiveness for electrostatic discharge protection was validated with an organic light-emitting diode screen protected by the nanocomposite that survived multiple rounds of electrostatic discharge.

Effect of multiple firings on the marginal fit of monolithic zirconia crowns: An in vitro study.

STATEMENT OF PROBLEM: Speed sintering was introduced to save chair time and produce monolithic zirconia restorations in a single visit. Multiple firings are usually required clinically for both speed-sintered and conventionally sintered monolithic zirconia crowns. However, the effects of multiple firings on the marginal fit of speed-sintered and conventionally sintered monolithic zirconia crowns are unknown. PURPOSE: The purpose of this in vitro study was to investigate the effect of multiple firings on the marginal fit of speed-sintered and conventionally sintered monolithic zirconia crowns. MATERIAL AND METHODS: Twenty conventionally sintered and 20 speed-sintered monolithic zirconia crowns were milled, sintered, and repeatedly fired by using conventional sintering and speed sintering furnaces. The absolute marginal discrepancy of the crowns was measured with a measuring microscope at ×100 magnification after sintering (T0) and after the first (T1), second (T2), and third firings (T3). Two-way repeated-measures ANOVA was used to detect the impact of multiple firings on the absolute marginal discrepancy of conventionally sintered and speed-sintered monolithic zirconia crowns and the differences between the 2 materials (α=.05). RESULTS: Multiple firings improved the absolute marginal discrepancy of conventionally sintered and speed-sintered monolithic zirconia crowns (P<.001). The absolute marginal discrepancy of conventionally sintered monolithic zirconia crowns at T2 and T3 was significantly smaller than that at T1 (P=.008 and 0.016, respectively), and the absolute marginal discrepancy of speed-sintered monolithic zirconia crowns at T2 was significantly smaller than that at T1 (P=.015). The speed-sintered monolithic zirconia crowns had a better marginal fit than conventionally sintered monolithic zirconia crowns (P=.008). No significant interaction was found between the multiple firings and material types on the absolute marginal discrepancy of monolithic zirconia crowns (P=.914). CONCLUSIONS: Multiple firing cycles can significantly improve the marginal fit of conventionally sintered and speed-sintered monolithic zirconia crowns. The speed-sintered monolithic zirconia crowns have a better marginal fit (both vertically and horizontally) than the conventionally sintered monolithic zirconia crowns.

Analgesic Effects and Adverse Reactions of Lidocaine for Patient-Controlled Intravenous Analgesia on Patients Undergoing Open Hepatectomy: A Retrospective Analysis.

PURPOSE: The aim of this study was to investigate the effect of lidocaine for patient controlled intravenous analgesia (PCIA) in patients who underwent open hepatectomy. DESIGN: A retrospective analysis. METHODS: A total of 281 patients who underwent open hepatectomy from July 2018 to December 2018 were included. All patients were assigned into two groups: the lidocaine group (PCIA consisted of lidocaine, sufentanil, tramadol and granisetron) and the control group (PCIA consisted of sufentanil, tramadol and granisetron). The postoperative visual analogue scale (VAS) and complications (including respiratory depression, hypotension, nausea and vomiting, pruritus, numbness of the corners of the mouth, dizziness) between the groups were compared. FINDINGS: There were no significant differences between the characteristics, duration of surgery and anesthesia, and recovery of postoperative activity between the two groups. In the first 3 days after the operation, the postoperative VAS score of the lidocaine group was lower than that of the control group at resting state, while after activity, the postoperative VAS contrast results were completely opposite. In particularly, the resting state at 48 hours (h) (1.05 ± 1.25 vs 1.57 ± 1.54) after surgery and the activity state at 72 h (3.02 ± 1.51 vs 2.2 ± 1.66) after surgery (P < 0.05). The incidence of mouth numbness and dizziness were significantly increased in the lidocaine group (P < 0.05). CONCLUSION: The addition of lidocaine in PCIA was not beneficial to improve the pain during activities and increased the incidence of perioral numbness and dizziness.

Flexible Recyclable Cellulose Paper Templated Cu-Doped Polydopamine Membranes with Dual Enzyme-Like Activity.

The development of high-efficiency enzyme mimics is of great significance in the field of biocatalysis. However, it remains challenging to design novel enzyme mimics with multiple enzyme-like activities, excellent stability, and good reusability. Herein, a facile molecular assembly strategy to construct dialdehyde cellulose (DAC) templated Cu-doped polydopamine (DAC@PDA/Cu) membrane with dual enzyme-like activities is presented. The Schiff base bonds formed between polydopamine (PDA) and DAC can not only accelerate the adhesion of PDA thin layer but also contribute to Cu-loading and high stability of DAC@PDA/Cu membrane. Importantly, the assembled DAC@PDA/Cu membrane exhibits a remarkable catalytic activity that is superior to the natural laccase along with high stability and excellent reusability. Moreover, the DAC@PDA/Cu membrane also demonstrates peroxidase-like activity, and it is successfully applied in the sensitive detection of ascorbic acid (AA). This work will provide a new paradigm methodology for rational design and practical applications of enzyme mimics based on bioinspired molecular assemblies.

Controlling Solution-State Aggregation and Solid-State Microstructures of Conjugated Polymers by Tuning Backbone Conformation.

Molecular ordering of conjugated polymers both in solution-state aggregates and in solid-state microstructures is a determining factor of the charge transport properties in optoelectronic devices. However, the effect of backbone conformation in conjugated polymers on assembly structures is still unclear. Herein, to understand such backbone conformation effect, three novel chlorinated benzodifurandionge-based oligo(p-phenylene vinylene) (BDOPV) polymers are systematically developed. These BDOPV-based polymers exhibit significantly twisted backbone conformation (near 90° interunit torsion angle) between conjugated units, which can prevent polymer chains from forming ordered assembly structures by increasing conformational energy penalty in closely packed chains. A higher rotational barrier of the torsion angle would further prevent polymer chains from assembling, finally resulting in nonaggregated chains in solution and highly disordered solid-state packing structures. This work will deepen the understanding of the relationship between polymer backbone conformation and assembly structures, contributing to the exploration of the structure-property relationship of polymers.

Influence of sleep bruxism on QTc interval and QT variability in patients with OSA: A pilot study.

BACKGROUND: Obstructive sleep apnea (OSA) is associated with increases in QT interval corrected for heart rate (QTc interval) and QT variability index (QTVI) and sleep bruxism (SB) is prevalent in OSA patients. OBJECTIVES: To examine whether QTc interval and QT variability were changed during episodes of rhythmic masticatory muscle activities (RMMAs)/SB in SB patients with and without OSA. METHODS: The RR and QTc intervals, and QTVI during RMMAs with or without accompanied limb movements (RMMAs/LMs) in 10 normal controls and 10 SB patients without OSA and during apneic and recovery periods of OSA in 10 SB patients with OSA were analysed. RESULTS: In the SB patients without OSA and controls, QTc intervals and QTVI were significantly increased during RMMAs/LMs compared with those during the 10 s periods (from 10th to 20th s) before the onset and after the offset of RMMAs/LMs, and significantly increased during RMMAs/LMs with awakenings compared with those with microarousals and no arousals. In addition, QTc interval and QTVI were positively correlated with the duration of RMMAs/LMs. Moreover, in the SB patients with OSA, QTc interval and QTVI during the recovery period of OSA events were significantly longer and higher than those during the apneic period regardless of accompanied RMMAs/LMs, and QTc interval and QTVI during the apneic and recovery periods accompanied with RMMAs/LMs were significantly longer and higher than those without accompanied RMMAs/LMs. CONCLUSION: OSA and RMMAs/LMs events were associated with longer QTc intervals and higher QTVI, and RMMAs/LMs might contribute to these changes associated with OSA events accompanied with RMMAs/LMs.

Implications of Virtual CBCT-Based Immediate Implant Planning for Maxillary and Mandibular First Molars.

The purpose of his study was to investigate the projected ridge-implant dimensions derived from virtual superimposition of implants on intact first molars mimicking immediate implantation in the mandible (Md1) and maxilla (Mx1) using cone-beam computed tomography (CBCT). The CBCT records of 41 patients (19 males and 22 females) with Md1 or Mx1 were collected. Ten-millimeter-long cylindrical implants with different diameters were virtually positioned at prosthetically ideal angles into interradicular septum using CBCT software. Radiographic alveolar ridge height (ARH), alveolar ridge width (ARW), gap distance, and vertical distance from the implant platform to the alveolar crest were measured. Twenty Mx1s (48.8%) and 21 Md1s (51.2%) were included. The mean ARH values were 7.13 ± 4.32 and 15.64 ± 1.80 mm for Mx1 and Md1, respectively; 87.8% of mesiobuccal sites had gap distance of >2 mm when 6-mm-diameter implants were used. Increasing implant diameter from 6 to 9 mm decreased the percentage of sites with ARW > 2 mm from 80.5% to 41.5% buccally and from 86.4% to 26.8% lingually. The mean vertical distance from the implant platform to the alveolar crest was 1.41 ± 1.09 mm buccally and 1.11 ± 1.10 mm lingually. Immediate implant placement of first molars, especially in the maxilla, requires stringent presurgical evaluation. Implants no wider than 6 mm placed into the interradicular septum may meet acceptable running room and alveolar plate thickness criteria if the jumping distance is grafted. Further clinical trials are needed to confirm these findings in this virtual study.

The crystal structure of Arabidopsis BON1 provides insights into the copine protein family.

The Arabidopsis thaliana BON1 gene product is a member of the evolutionary conserved eukaryotic calcium-dependent membrane-binding protein family. The copine protein is composed of two C2 domains (C2A and C2B) followed by a vWA domain. The BON1 protein is localized on the plasma membrane, and is known to suppress the expression of immune receptor genes and to positively regulate stomatal closure. The first structure of this protein family has been determined to 2.5-Å resolution and shows the structural features of the three conserved domains C2A, C2B and vWA. The structure reveals the third Ca2+ -binding region in C2A domain is longer than classical C2 domains and a novel Ca2+ binding site in the vWA domain. The structure of BON1 bound to Mn2+ is also presented. The binding of the C2 domains to phospholipid (PSF) has been modeled and provides an insight into the lipid-binding mechanism of the copine proteins. Furthermore, the selectivity of the separate C2A and C2B domains and intact BON1 to bind to different phospholipids has been investigated, and we demonstrated that BON1 could mediate aggregation of liposomes in response to Ca2+ . These studies have formed the basis of further investigations into the important role that the copine proteins play in vivo.

The functional motions and related key residues behind the uncoating of coxsackievirus A16.

The coxsackievirus A16 (CVA16) is a highly contagious virus that causes the hand, foot, and mouth disease, which seriously threatens the health of children. At present, there are still no available antiviral drugs or effective treatments against the infection of CVA16, and thus it is of great significance to develop anti-CVA16 vaccines. However, the intrinsic uncoating property of the capsid may destroy the neutralizing epitopes and influence its immunogenicity, which hinders the vaccine developments. In the present work, the functional-quantity-based elastic network model analysis method developed by our group was extended to combine with group theory to investigate the uncoating motions of the CVA16 capsid, and then the functionally key residues controlling the uncoating motions were identified by our functional-quantity-based perturbation method. Several motion modes encoded in the topological structure of the capsid were revealed to be responsible for the uncoating of CVA16 particle. These modes predominantly contribute to the fluctuation of the gyration radius of the capsid. Then, by using the perturbation method, four clusters of key sites involved in the uncoating motions were identified, whose perturbations induce significant changes in the fluctuation of the gyration radius. These key residues are mainly located at the 2-fold channels, the quasi 3-fold channels, the bottom of the canyons, and the inter-subunit interfaces around the 3-fold axes. Our studies are helpful for better understanding the uncoating mechanism of the CVA16 capsid and provide potential target sites to prevent the uncoating motions, which is valuable for the vaccine design against CVA16.

Single and combined effects of microplastics and lead on the freshwater algae Microcystis aeruginosa.

Recently, the pollution of microplastics (MPs) in the global freshwater environment has become increasingly problematic, but there are few studies on the freshwater environment risks of MPs. The present study, therefore, has investigated the single and combined effects of MPs and lead (Pb) on the freshwater algal Microcystis aeruginosa. Results showed that Pb-only (>0.05 mg·L-1) promoted the growth of algal cells, while MPs-only (1 mg L-1) resulted in growth inhibition. However, compared with the corresponding concentration of Pb-only groups, the growth of algal cells was promoted in MPs + Pb treatments. MPs-only and Pb-only (0.5 mg L-1) both reduced the content of photosynthetic pigments and affected algal photosynthesis. The MPs-only treatment and MPs + Pb2+ (no pretreatment, 0.5 mg L-1 Pb2+) treatments showed significant cell aggregation. At the same time, MPs-only caused a significant increase in bound extracellular polysaccharides (bEPS), while 0.5 mg L-1 Pb reduced bEPS. Furthermore, under high Pb stress (0.5 mg L-1), the effects of combined MPs and Pb on chlorophyll content, antioxidant enzyme activity (peroxidase (POD), catalase (CAT)), and damage to algal cells were less compared to individual effects, and the combination of MPs and Pb had a synergistic effect on promoting aggregations of M. aeruginosa. These results demonstrate that single and combined effects of MPs and Pb can induce differential responses in the freshwater algal M. aeruginosa, which can have a significant impact on aquatic ecosystems.

Towards Accurate, Cost-Effective, Ultra-Low-Power and Non-Invasive Respiration Monitoring: A Reusable Wireless Wearable Sensor for an Off-the-Shelf KN95 Mask.

Respiratory rate is a critical vital sign that indicates health condition, sleep quality, and exercise intensity. This paper presents a non-invasive, ultra-low-power, and cost-effective wireless wearable sensor, which is installed on an off-the-shelf KN95 mask to facilitate respiration monitoring. The sensing principle is based on the periodic airflow temperature variations caused by exhaled hot air and inhaled cool air in respiratory cycles. By measuring the periodic temperature variations at the exhalation valve of mask, the respiratory parameters can be accurately and reliably detected, regardless of body movements and breathing pathways through nose or mouth. Specifically, we propose a voltage divider with controllable resistors and corresponding selection criteria to improve the sensitivity of temperature measurement, a peak detection algorithm with spline interpolation to increase sampling period without reducing the detection accuracy, and effective low-power optimization measures to prolong the battery life. The experimental results have demonstrated the effectiveness of the proposed sensor, showing a small mean absolute error (MAE) of 0.449 bpm and a very low power consumption of 131.4 µW. As a high accuracy, low cost, low power, and reusable miniature wearing device for convenient respiration monitoring in daily life, the proposed sensor holds promise in real-world feasibility.

A novel alginate localization molding technique for cross-sectional area measurement of human tendon to access biomechanical properties.

Accurate determination of the biomedical properties of connective tissue such as tendons and ligaments is dependent on the accurate measurement of their cross-sectional area (CSA). To date, techniques for determining cross-sectional areas of ligaments and tendons have been less than ideal due to their complex geometries and their deformations under external load. A novel non-destructive technique has been developed for determining the cross-sectional area of tendon by locating the tendon rupture, in which aqueous rapid curing alginate dental molding materials, digital photography and computerized image analysis are utilized. This technique marks tendons and alginate molds at 1 cm interval and then tendons are taken out for tensile test. Real-time video is recorded to locate the position of tendon rupture. The corresponding alginate slice is found and then analysis through computer image processing software to obtain a more accurate CSA at tendon rupture, which can be used to calculate the stress and young's modulus of tendon. The accuracy of this technique has been investigated and comparisons have been made with the alginate un-localization molding technique and ellipse estimation technique. Results show this technique can provide accurate CSA values (within 2%) and great reproducibility (coefficient of variation = 0.8%). The technique is non-destructive, can obtain morphological information of soft tissue and can detect cavities.

Morphologic analysis of alveolar bone in maxillary and mandibular incisors on sagittal views.

PURPOSE: The aim of this study was to analyze the morphologic features of alveolus in relatively healthy maxillary and mandibular incisors using cone-beam-computed tomography (CBCT). METHODS: CBCT images of 318 patients were retrospectively acquired. Alveolar bone in incisive area was divided into: type 1 (thick), type 2 (relatively thick with mono-plate concavity), type 3 (thin with double-plate concavities), and type 4 (vulnerably thin). Alveolus prevalence and widths were analyzed statistically relative to age, gender, and molar relationship. RESULTS: Prevalence of type 1 alveolus was 78.9% in maxillary central incisors, 15.1% in maxillary lateral incisors, 24.1% in mandibular central incisors, and 5.0% in mandibular lateral incisors. Type 2 alveolus was commonly observed in the maxillary lateral incisors (82.2%), mandibular central incisors (66.2%), and mandibular lateral incisors (87.9%). Prevalence of type 3 and 4 alveoli ranged from 0.0 to 9.4%. As for maxillary central incisors, type 1 was the widest both at the alveolar crest (7.77 ± 0.58 mm) and apical area (9.05 ± 1.86 mm), while type 3 had the lowest width at the apical region (4.08 ± 0.51 mm). Among maxillary central incisors, prevalence of type 1 tended to decrease with age. At all maxillary and mandibular incisor sites, alveolus widths were significantly thicker in males than in females. At maxillary lateral incisor and mandibular incisor sites, prevalence of alveolus type was significantly different among three molar relationships. CONCLUSION: A 4-type classification system was suggested for alveolus morphology in incisive region. Identification of alveolus type might aid in the corresponding treatment.

Optimization of n-butanol synthesis in Lactobacillus brevis via the functional expression of thl, hbd, crt and ter.

N-butanol is an important chemical and can be naturally synthesized by Clostridium species; however, the poor n-butanol tolerance of Clostridium impedes the further improvement in titer. In this study, Lactobacillus brevis, which possesses a higher butanol tolerance, was selected as host for heterologous butanol production. The Clostridium acetobutylicum genes thl, hbd, and crt which encode thiolase, ß-hydroxybutyryl-CoA dehydrogenase, and crotonase, and the Treponema denticola gene ter, which encodes trans-enoyl-CoA reductase were cloned into a single plasmid to express the butanol synthesis pathway in L. brevis. A titer of 40 mg/L n-butanol was initially achieved with plasmid pLY15-opt, in which all pathway genes are codon-optimized. A titer of 450 mg/L of n-butanol was then synthesized when ter was further overexpressed in this pathway. The role of metabolic flux was reinforced with pLY15, in which only the ter gene was codon-optimized, which greatly increased the n-butanol titer to 817 mg/L. Our strategy significantly improved n-butanol synthesis in L. brevis and the final titer is the highest achieved amongst butanol-tolerant lactic acid bacteria.

Preparation and Anti-Mold Properties of Nano-ZnO/Poly(N-isopropylacrylamide) Composite Hydrogels.

The aim of this study was to overcome drawbacks of the inhomogeneous dispersion and facile agglomeration of nano-ZnO/poly(N-isopropylacrylamide) composite hydrogels (nano-ZnO/PNIPAm composite hydrogels) during synthesis and improve the anti-mold property of the nano-ZnO/PNIPAm composite hydrogels. Here, nano-ZnO/PNIPAm composite hydrogels were prepared by the radical polymerization method. Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), differential scanning calorimeter (DSC), and dynamic light scattering (DLS) were used to characterize the effects of different dispersants on the particle sizes, dispersions, and phase transition characteristics of the nano-ZnO/PNIPAm composite hydrogels. The anti-mold properties of nano-ZnO/PNIPAm composite hydrogels were studied. Results revealed that the nano-ZnO/PNIPAm composite hydrogel prepared by the addition of nano-ZnO dispersion liquid exhibited the smallest particle size, the most homogeneous dispersion, and the highest stability. The addition of the dispersant did not change the phase transition characteristics of nano-ZnO/PNIPAm, and the nano-ZnO/PNIPAm composite hydrogels (Pf) exhibited good anti-mold properties to the bamboo mold.