Etiological Mechanisms and Genetic/Biological Modulation Related to PTH1R in Primary Failure of Tooth Eruption.

Primary failure of eruption (PFE) is a rare disorder that is characterized by the inability of a molar tooth/teeth to erupt to the occlusal plane or to normally react to orthodontic force. This condition is related to hereditary factors and has been extensively researched over many years. However, the etiological mechanisms of pathogenesis are still not fully understood. Evidence from studies on PFE cases has shown that PFE patients may carry parathyroid hormone 1 receptor (PTH1R) gene mutations, and genetic detection can be used to diagnose PFE at an early stage. PTH1R variants can lead to altered protein structure, impaired protein function, and abnormal biological activities of the cells, which may ultimately impact the behavior of teeth, as observed in PFE. Dental follicle cells play a critical role in tooth eruption and root development and are regulated by parathyroid hormone-related peptide (PTHrP)-PTH1R signaling in their differentiation and other activities. PTHrP-PTH1R signaling also regulates the activity of osteoblasts, osteoclasts and odontoclasts during tooth development and eruption. When interference occurs in the PTHrP-PTH1R signaling pathway, the normal function of dental follicles and bone remodeling are impaired. This review provides an overview of PTH1R variants and their correlation with PFE, and highlights that a disruption of PTHrP-PTH1R signaling impairs the normal process of tooth development and eruption, thus providing insight into the underlying mechanisms related to PTH1R and its role in driving PFE.

Polymer Microspheres Copolymerized with Deep Red Fluorescent Molecules as a Label for Lateral Flow Immunochromatography.

The development of fluorescently labeled microspheres is a critical aspect of advancing the technology of lateral flow immunochromatography (LFIA) for biological detection. Nevertheless, potential interference posed by the background fluorescence originating from the nitrocellulose (NC) membrane would significantly impact the sensitivity and accuracy of microsphere-based detection in LFIA. In this work, an attempt was made to extend the π-conjugated system and asymmetric structure of rhodamine fluorophore, resulting in the synthesis of dye molecules (RB2) incorporating double bonds, which can reach an absolute photoluminescence quantum yield (PLQY) of 30.01% in EtOH. Subsequently, carboxyl group functionalized fluorescent microspheres were prepared in a two-step copolymerization via soap-free emulsion polymerization. The obtained microspheres were characterized by scanning electron microscopy, transmission electron microscopy, DLS, Fourier transform infrared spectroscopy, ultraviolet spectrophotometry, and fluorescence spectrophotometry. The results showed that RB2 was successfully copolymerized into the microspheres, and the resulting microspheres had good dispersion and stability with high red fluorescence intensity (λabs ∼ 610 nm, λem ∼ 660 nm). Utilizing these microspheres, the resulting lateral flow immunoassay was successfully found to detect SARS-CoV-2 N protein with a detection limit of 2.5 pg/mL and the linear concentration spanning from 2.5 pg/mL to 10 ng/mL. The results confirm the effectiveness of the synthetic fluorescent microspheres as the label for LFIA.

A nature-inspired multifunctional adhesive for cartilage tissue-biomaterial integration.

Surgical adhesives play a crucial role in tissue integration and repair, yet their application in wet conditions has been severely limited by inadequate adhesive strength and subpar biocompatibility. Furthermore, tissue adhesives have rarely been reported in cartilage tissue repair. In this study, a three-armed dopamine-modified hyaluronic acid derivative adhesive was prepared to function as a bio-inspired adhesive in moist environments. To meet the clinical requirements for cartilage tissue adhesion, we studied its chemical structure, including microscopic morphology, adhesion properties with materials and tissues, in vivo degradation rules, and biological evaluation. The OGMHA8-DOPA adhesive with the optimal aldehyde substitution degree and dopamine-grafting rate was determined by analyzing the experimental conditions. SEM results revealed that the cartilage tissue adhered to a porous interconnected structure. The excellent biocompatibility of the material not only facilitated chondrocyte adhesion but also supported their proliferation on its surface. Animal experiments have demonstrated that this material has no observable inflammatory response or incidence of fibrous capsule formation. The degradation timeline of the material extends beyond the duration of two weeks. The dopamine-modified adhesive exhibited a tight interfacial binding force between the biomaterial and cartilage tissue and excellent biocompatibility in watery tissue, revealing its potential for application in cartilage tissue repair and minimally invasive surgery.

Unveiling the Roles of Alloyed Boron in Hexavalent Chromium Removal Using Borohydride-Synthesized Nanoscale Zerovalent Iron: Electron Donor and Antipassivator.

Nanoscale zerovalent iron synthesized using borohydride (B-NZVI) has been widely applied in environmental remediation in recent decades. However, the contribution of boron in enhancing the inherent reactivity of B-NZVI and its effectiveness in removing hexavalent chromium [Cr(VI)] have not been well recognized and quantified. To the best of our knowledge, herein, a core-shell structure of B-NZVI featuring an Fe-B alloy shell beneath the iron oxide shell is demonstrated for the first time. Alloyed boron can reduce H+, contributing to more than 35.6% of H2 generation during acid digestion of B-NZVIs. In addition, alloyed B provides electrons for Fe3+ reduction during Cr(VI) removal, preventing in situ passivation of the reactive particle surface. Meanwhile, the amorphous oxide shell of B-NZVI exhibits an increased defect density, promoting the release of Fe2+ outside the shell to reduce Cr(VI), forming layer-structured precipitates and intense Fe-O bonds. Consequently, the surface-area-normalized capacity and surface reaction rate of B-NZVI are 6.5 and 6.9 times higher than those of crystalline NZVI, respectively. This study reveals the importance of alloyed B in Cr(VI) removal using B-NZVI and presents a comprehensive approach for investigating electron pathways and mechanisms involved in B-NZVIs for contaminant removal.

Identification of Additives in Disposable Face Masks and Evaluation of Their Toxicity Using Marine Medaka (Oryzias melastigma).

The COVID-19 pandemic has resulted in huge amounts of face masks worldwide. However, there is a lack of awareness on the additives and their potential risk to aquatic ecosystems of face masks. To address this issue, the additives and their toxicity in 13 face masks (e.g., polypropylene, polyethylene, and polylactic acid) were determined using nontarget analysis and bioassays. A total of 826 organic additives including intermediates (14.8%), surfactants (9.3%), plasticizers (8.2%), and antioxidants (6.1%) were tentatively identified, with 213 compounds being assigned confidence levels of 1 and 2. Interestingly, polylactic acid masks contained more additives than most polypropylene or polyethylene masks. Among these additives, the concentration of tris(2-ethylhexyl) phosphate in masks was 9.4-978.2 ng/g with a 100% detection frequency. Furthermore, 13 metals such as zinc (up to 202.0 µg/g), copper (32.5 µg/g), and chromium (up to 5.7 µg/g) were detected in the face masks. The methanol extracts of the masks showed the developmental toxicity, swimming behavior, and/or endocrine disruption in embryos/larvae of Oryzias melastigma. The findings demonstrate that face masks contain various toxic additives to marine medaka, which deserves close attention to pollution by face masks.

Discovery of a highly selective fluorescent probe for hydrogen peroxide and its biocompatibility evaluation and bioimaging applications in cells and zebrafish.

As one of the most widely distributed reactive oxygen species in vivo, hydrogen peroxide plays divergent and important roles in cell growth, differentiation and aging. When the level of hydrogen peroxide in the body is abnormal, it will lead to genome mutation and induce irreversible oxidative modification of proteins, lipids and polysaccharides, resulting in cell death or even disease. Therefore, it is significant to develop a sensitive and specific probe for real-time detection of hydrogen peroxide in vivo. In this study, the response mechanism between hydrogen peroxide and probe QH was investigated by means of HRMS and the probe showed good optical properties and high selectivity to hydrogen peroxide. Note that the evaluating of probe biocompatibility resulted from cytotoxicity test, behavioral test, hepatotoxicity test, cardiotoxicity test, blood vessel toxicity test, immunotoxicity test and neurotoxicity test using cell and transgenic zebrafish models with more than 20 toxic indices. Furthermore, the detection performance of the probe for hydrogen peroxide was evaluated by multiple biological models and the probe was proved to be much essential for the monitoring of hydrogen peroxide in vivo.

Chiral MoS2@BC fibrous membranes selectively promote peripheral nerve regeneration.

BACKGROUND: Molybdenum disulfide (MoS2) has excellent physical and chemical properties. Further, chiral MoS2 (CMS) exhibits excellent chiroptical and enantioselective effects, and the enantioselective properties of CMS have been studied for the treatment of neurodegenerative diseases. Intriguingly, left- and right-handed materials have different effects on promoting the differentiation of neural stem cells into neurons. However, the effect of the enantioselectivity of chiral materials on peripheral nerve regeneration remains unclear. METHODS: In this study, CMS@bacterial cellulose (BC) scaffolds were fabricated using a hydrothermal approach. The CMS@BC films synthesized with L-2-amino-3-phenyl-1-propanol was defined as L-CMS. The CMS@BC films synthesized with D-2-amino-3-phenyl-1-propanol was defined as D-CMS. The biocompatibility of CMS@BC scaffolds and their effect on Schwann cells (SCs) were validated by cellular experiments. In addition, these scaffolds were implanted in rat sciatic nerve defect sites for three months. RESULTS: These chiral scaffolds displayed high hydrophilicity, good mechanical properties, and low cytotoxicity. Further, we found that the L-CMS scaffolds were superior to the D-CMS scaffolds in promoting SCs proliferation. After three months, the scaffolds showed good biocompatibility in vivo, and the nerve conducting velocities of the L-CMS and D-CMS scaffolds were 51.2 m/s and 26.8 m/s, respectively. The L-CMS scaffolds showed a better regenerative effect than the D-CMS scaffolds. Similarly, the sciatic nerve function index and effects on the motor and electrophysiological functions were higher for the L-CMS scaffolds than the D-CMS scaffolds. Finally, the axon diameter and myelin sheath thickness of the regenerated nerves were improved in the L-CMS group. CONCLUSION: We found that the CMS@BC can promote peripheral nerve regeneration, and in general, the L-CMS group exhibited superior repair performance. Overall, the findings of this study reveal that CMS@BC can be used as a chiral nanomaterial nerve scaffold for peripheral nerve repair.

Peptide nucleic acid-dependent artifact can lead to false-positive triplex gene editing signals.

Triplex gene editing relies on binding a stable peptide nucleic acid (PNA) sequence to a chromosomal target, which alters the helical structure of DNA to stimulate site-specific recombination with a single-strand DNA (ssDNA) donor template and elicits gene correction. Here, we assessed whether the codelivery of PNA and donor template encapsulated in Poly Lactic-co-Glycolic Acid (PLGA)-based nanoparticles can correct sickle cell disease and x-linked severe combined immunodeficiency. However, through this process we have identified a false-positive PCR artifact due to the intrinsic capability of PNAs to aggregate with ssDNA donor templates. Here, we show that the combination of PNA and donor templates but not either agent alone results in different degrees of aggregation that result in varying but highly reproducible levels of false-positive signal. We have identified this phenomenon in vitro and confirmed that the PNA sequences producing the highest supposed correction in vitro are not active in vivo in both disease models, which highlights the importance of interrogating and eliminating carryover of ssDNA donor templates in assessing various gene editing technologies such as PNA-mediated gene editing.

Effects of combined microplastic and cadmium pollution on sorghum growth, Cd accumulation, and rhizosphere microbial functions.

The interaction between microplastics (MPs) and cadmium (Cd) poses a threat to agricultural soil environments, and their effects on plant growth and rhizosphere microbial community functions are not yet clear. In this study, energy sorghum was used as a test plant to investigate the effects of two types of MPs, polystyrene (PS) and polyethylene (PE), at different particle sizes (13 µm, 550 µm) and concentrations (0.1%, 1% w/w), and Cd, as well as their interactions, on the growth of sorghum in a soil-cultivation pot experiment. The results showed that the combined effects of MP and Cd pollution on the dry weight and Cd accumulation rate in sorghum varied depending on the type, concentration, and particle size of the MPs, with an overall trend of increasing stress from combined pollution with increasing Cd content and accumulation. High-throughput sequencing analysis revealed that combined MP and Cd pollution increased bacterial diversity, and the most significant increase was observed in the abundance-based coverage estimator (ACE), Shannon, and Sobs indices in the 13 µm 1% PS+Cd treatment group. Metagenomic analysis based on the Kyoto Encyclopedia of Genes and Genomes (KEGG) metabolic pathways revealed that 19 groups of metabolic pathways, including microbial metabolism and methane metabolism, differed significantly under combined MP and Cd pollution. Hierarchical clustering results indicated that Cd treatment and combined MP and Cd treatment affected the abundances of sorghum rhizosphere soil nitrogen (N) and phosphorus (P) cycling genes and that the type of MP present was an important factor affecting N and P cycling genes. The results of this study provide a basis for exploring the toxic effects of combined MP and Cd pollution and for conducting soil environmental risk assessments.

Maternal periodontitis may cause lower birth weight in children: genetic evidence from a comprehensive Mendelian randomization study on periodontitis and pregnancy.

OBJECTIVES: This study aims to comprehensively investigate the potential genetic link between periodontitis and adverse pregnancy outcomes using a two-sample Mendelian Randomization approach. MATERIALS AND METHODS: We employed robust genetic instruments for chronic periodontitis as exposure data from the FinnGen database. Data encompassing various pregnancy stage outcomes, including pre-pregnancy conditions (irregular menstruation, endometriosis, abnormal reproductive bleeding, and female infertility), pregnancy complications (hemorrhage, spontaneous miscarriage, and abnormalities in products), and post-pregnancy factors (single spontaneous delivery, labor duration, and birth weight of the child), were obtained from the UK Biobank. The random-effects inverse-variance weighted (IVW) method was utilized to compute primary estimates while diligently assessing potential directional pleiotropy and heterogeneity. RESULTS: Our findings indicate a negative association between periodontitis and labor duration (odds ratio [OR] = 0.999; 95% confidence interval [CI]: 0.999 to 1.000; P = 0.017). Individuals with periodontitis are more likely to deliver lower-weight infants (OR = 0.983; 95% CI: 0.972 to 0.995; P = 0.005). We found no evidence of pleiotropy or heterogeneity in aforementioned two associations. We did not observe casual links with pre-pregnancy conditions and pregnancy complications. CONCLUSIONS: This Mendelian Randomization study underscores the genetic influence of periodontitis on specific adverse pregnancy outcomes, particularly concerning labor duration and lower birth weight deliveries. CLINICAL RELEVANCE: Our study emphasizes the critical importance of maintaining periodontal health during pregnancy and offers genetic evidence supporting these associations. Further investigation is required to delve deeper into the specific underlying mechanisms.

Assessment Methods and Intervention Strategies for Cleft-Related Lateral Misarticulation in Chinese-Speaking Children.

The aim of this study was to analyze the characteristics and error speech features of cleft-related lateral misarticulation and provide a basis for clinical evaluation and rational intervention. Participants who were diagnosed with lateral misarticulation after cleft palate repairment were 126 children aged 4, 6 to 16, and 11, and they had complete palatopharyngeal closure, no abnormalities in their speech organs and occlusion, and no hearing or intellectual impairments. The Chinese standard pronunciation clarity word list, the American KAY CSL4500, the Beijing Yangchen YF-16 computer speech analysis workstation, soundproof rooms, Wechsler scales of intelligence-fourth edition, and audiometers were used to evaluate the cleft-related lateral misarticulation. Statistical analysis was performed on the age, gender, error rate, corner of the mouth deviation direction, comorbidity, duration of intervention, period of treatment, and therapeutic effect of concentrated or normal intervention group in different patients. Our results showed that 2 to 3 straight stripes were visible at the onset of consonants /ti:/ /t'i:/, and 3 clear straight lines were visible in /tʂ/, indicating that the lateralized sound had 2 or 3 bursts and lasted for 1 to 2 ms. The onset age of lateralized sound was mostly below 12 years old. Chinese lateralized sound mainly occurred in vowel /i:/, and the occurrence rate of consonants with tongue surface /tɕ]/ /tɕ'/ /ɕ/ was the highest. In addition, the corner of the mouth deviation was also an indicator of lateralization sound, and other types of speech disorders mostly accompanied it. There was a significant difference in the improvement of speech clarity between the concentrated intervention group and the normal group before and after treatment. The 2 groups' average duration and course of treatment were not significantly different. Still, the period of concentrated intervention was shortened considerably, and the speech clarity of both groups of children after treatment exceeded 96%, reaching a normal level.

[Development and Challenges of Additive Manufactured Customized Implant].

Additive manufacturing (3D printing) technology aligns with the direction of precision and customization in future medicine, presenting a significant opportunity for innovative development in high-end medical devices. Currently, research and industrialization of 3D printed medical devices mainly focus on nondegradable implants and degradable implants. Primary areas including metallic orthopaedic implants, polyether-ether-ketone (PEEK) bone implants, and biodegradable implants have been developed for clinical and industrial application. Recent research achievements in these areas are reviewed, with a discussion on the additive manufacturing technologies and applications for customized implants. Challenges faced by different types of implants are analyzed from technological, application, and regulatory perspectives. Furthermore, prospects and suggestions for future development are outlined.

HMGN2 represses gene transcription via interaction with transcription factors Lef-1 and Pitx2 during amelogenesis.

The chromatin-associated high mobility group protein N2 (HMGN2) cofactor regulates transcription factor activity through both chromatin and protein interactions. Hmgn2 expression is known to be developmentally regulated, but the post-transcriptional mechanisms that regulate Hmgn2 expression and its precise roles in tooth development remain unclear. Here, we demonstrate that HMGN2 inhibits the activity of multiple transcription factors as a general mechanism to regulate early development. Bimolecular fluorescence complementation, pull-down, and coimmunoprecipitation assays show that HMGN2 interacts with the transcription factor Lef-1 through its HMG-box domain as well as with other early development transcription factors, Dlx2, FoxJ1, and Pitx2. Furthermore, EMSAs demonstrate that HMGN2 binding to Lef-1 inhibits its DNA-binding activity. We found that Pitx2 and Hmgn2 associate with H4K5ac and H3K4me2 chromatin marks in the proximal Dlx2 promoter, demonstrating Hmgn2 association with open chromatin. In addition, we demonstrate that microRNAs (miRs) mir-23a and miR-23b directly target Hmgn2, promoting transcriptional activation at several gene promoters, including the amelogenin promoter. In vivo, we found that decreased Hmgn2 expression correlates with increased miR-23 expression in craniofacial tissues as the murine embryo develops. Finally, we show that ablation of Hmgn2 in mice results in increased amelogenin expression because of increased Pitx2, Dlx2, Lef-1, and FoxJ1 transcriptional activity. Taken together, our results demonstrate both post-transcriptional regulation of Hmgn2 by miR-23a/b and post-translational regulation of gene expression by Hmgn2-transcription factor interactions. We conclude that HMGN2 regulates tooth development through its interaction with multiple transcription factors.

A label-free electrochemical aptasensor based on Bi-Sb alloy materials for potential POCT of HER-2.

As a prognostic biomarker for breast cancer, human epidermal growth factor receptor 2 (HER-2) is of crucial diagnostic value. Here, a label-free electrochemical aptasensor was established for the ultrasensitive detection of HER-2 using a modified electrode of Bi-Sb alloy materials (Bi-Sb AMs). The performance of the aptasensor was enhanced greatly due to the introduction of Bi-Sb alloy materials (Bi-Sb AMs) with high conductivity. Furthermore, by integrating the aptasensor with the Sensit Smart U-disk electrochemical analyzer, the point-of-care testing (POCT) for HER-2 was realized. Under the optimal experimental parameters, the POCT analyzer showed a wide linear response from 0.01 pg mL-1 to 100 ng mL-1, with a low detection limit (LOD) of 5.96 fg mL-1 for the detection of HER-2. The presented POCT analyzer exhibited good specificity, stability, and reproducibility. Benefiting from the simple operation and rapid testing, the developed analyzer will have potential application in the prognostic diagnosis and treatment of breast cancer.

Establishment and validation of a sensitive LC-MS/MS method for the quantification of KRASG12C protein PROTAC molecule LC-2 in rat plasma and its application to in vivo pharmacokinetic studies of LC-2 PEGylated liposomes.

LC-2, is a molecule of proteolysis targeting chimeras (PROTACs), with a large molecular weight, poor water solubility and low system bioavailability, which was designed to degrade KRASG12C protein. In this study, LC-2 PEGylated liposomes were developed and characterized. Moreover, a rapid and sensitive liquid chromatography-tandem mass spectrometry (LC-MS/MS) method in rat plasma was established and effectively utilized for an in vivo pharmacokinetic investigation. LC-2 PEGylated liposomes with better properties were prepared by an improved ethanol injection method. The chromatographic separation was achieved on an Agilent Eclipse XDB-CN column (100 × 2.1 mm, 3.5 µm) with acetonitrile-ammonium deionized water (5 mm; 80:20, v/v) at a flow rate of 0.5 ml/min. The mass spectra of LC-2 and the IS (gefitinib) were obtained at m/z 1132.5 → 626.4 and 447.1 → 128.2, respectively. The pharmacokinetic study was carried out by analyzing plasma concentrations of LC-2 solution or produced LC-2 PEGylated liposomes in rats using the developed and validated method. The pharmacokinetic results indicate that PEGylated liposome-encapsulation protected LC-2 from the influence of endogenous protein binding, improved insolubility, prolonged half-life and increased system bioavailability. This study provides a feasible solution for future preclinical and clinical studies of LC-2 and/or other PROTACs.

Analysis of Online Recruitment Intention Among 543 Hospitals: A Comprehensive Investigation of Influencing Factors and Current Situation.

Objective: The primary objective of this study was to investigate the current state of online recruitment intention among hospitals and identify its key influencing factors. This research aims to provide valuable insights that can guide the development of recruitment and employment strategies for hospital departments and student management. Methods: This study employed a cross-sectional survey approach involving 543 hospitals. Data collection utilized both convenient offline recruitment methods and online recruitment information platforms. A total of 543 questionnaires were distributed, resulting in the collection of 543 valid responses. The participating hospitals comprised 225 tertiary hospitals and 318 secondary hospitals. Additionally, the sample included 430 general hospitals, 113 psychiatric hospitals, dental hospitals, and 406 specialized hospitals. Geographically, 137 hospitals were located in urban counties or towns. Furthermore, 333 hospitals targeted undergraduate graduates, while 210 focused on graduate students. Results: The analysis of the data revealed several significant findings. Among the included hospitals in the sample, 19.71% expressed online recruitment intention for candidates with neurasthenia. Factors contributing to a higher online recruitment intention among hospitals included a preference for recruiting undergraduates (P = .011), the belief that online recruitment is suitable for clinical positions (P = .002), challenges in assessing candidates' expertise online (P = .002), concerns about dishonesty in online recruitment (P = .028), and the perception that online recruitment requires less technical expertise for hospitals (P < .001). Conclusions: This study highlights the multifaceted nature of online recruitment intention within hospitals. The identified influential factors emphasize the need for customized strategies in recruitment and employment. Medical university recruitment and employment departments should adopt tailored measures that align with the unique dynamics of online recruitment to address these factors effectively. In this way, hospitals can enhance their recruitment processes and ensure the selection of candidates that meet their specific requirements.

Complications and Treatments of Pseudomonas aeruginosa Infection After Rhinoplasty With Implants: A Clinical Study.

BACKGROUND: Pseudomonas aeruginosa is an opportunistic pathogen, and because of its specificity, its treatments appear tricky in postrhinoplasty infections with internal implants. This study summarizes the clinical characteristics and treatment of this type of infections to provide some reference for clinical work. METHODS: We retrospectively analyzed 10 patients who were diagnosed with a nasal infection of P. aeruginosa after implant nasal augmentation. The results of the bacterial culture and drug sensitivity test of the patients' wound secretions were summarized and analyzed. We summarized the characteristics of the patients' infection and the treatments, and we also summarized the patients' prognosis. RESULTS: In these 10 cases, their implants included rib cartilage and ear cartilage alone, as well as their own cartilage combined with expanded polytetrafluoroethylene and silicone. All patients developed wound infections within 1 month after rhinoplasty, with bacterial cultures of P. aeruginosa . Prolonged use of sensitive antibiotics, as well as wound dressing changes, failed to keep the infection well under control. Patients whose implant was removed and thoroughly debrided within 1 week of infection did not experience any serious complications. In patients who were infected for >1 week before surgery to remove the implants, complications such as nasal column necrosis and nasal contracture occurred, and later the nasal repair was performed after multiple surgeries. CONCLUSIONS: For bacterial infections in postrhinoplasty wounds with implants, we recommend early bacterial culture. If the infection is clearly P. aeruginosa , the implant should be removed and thoroughly debrided as soon as possible to avoid serious complications. LEVEL OF EVIDENCE: Level IV.

A technique for improved gingival esthetics on complete arch implant-supported acrylic resin prototype prosthesis.

An important step during the workflow of complete arch fixed implant-supported prostheses is the fabrication of an acrylic resin prototype prosthesis so that the patient can visualize the definitive treatment outcome or to be used as an interim prosthesis. The prototype prosthesis is typically designed digitally as a single file and is produced by milling from a solid block of white-colored prepolymerized acrylic resin. A common challenge in fabricating a resin-based prototype prosthesis is reproducing the natural appearance of the gingival architecture in gingiva-colored material. Current methods, including multicolored resin blocks, gingiva-colored stain, and layering with gingiva-colored composite resin, can be costly, time-consuming, and labor-intensive. This article describes a straightforward chairside technique that allows clinicians to fabricate an acrylic resin prototype prosthesis with appropriate gingival esthetics.

Clinical outcomes of implant-supported monolithic zirconia crowns and fixed partial dentures: A systematic review.

PURPOSE: To determine the survival rates of implant-supported monolithic zirconia crowns and fixed partial dentures (FPD). MATERIAL AND METHODS: An electronic search for articles in the English language literature published from January 1, 2001 to September 17, 2021 was performed using PubMed, Scopus, and CENTRAL search engines. After applying predetermined inclusion and exclusion criteria, the definitive list of selected articles was used for calculating the interval survival rate (ISR) and cumulative survival rate (CSR). Restoration failure in this study was defined as the fracture or compromise of any part of the ceramic restoration that required the removal or remake of the implant-supported restoration. RESULTS: The electronic search resulted in 457 titles. The systematic application of inclusion and exclusion criteria resulted in 14 clinical studies that addressed the clinical outcomes of implant-supported monolithic zirconia crowns and fixed partial dentures. Of these, 3 were randomized controlled trials, 5 were prospective studies, and 6 were retrospective studies. Follow-up periods ranged from 1 to 5 years. Of the 644 implant-supported monolithic zirconia restorations computed in this systematic review, there was only 1 reported failure of the monolithic zirconia restorative material over a follow-up period of up to 5 years, for a cumulative survival rate of 99.84%. At the maximum follow-up interval of 5 years, the cumulative survival rate for monolithic zirconia single crowns was 100% and the cumulative survival rate for monolithic zirconia fixed partial dentures was 99.60%. CONCLUSIONS: Implant-supported monolithic zirconia single crowns and fixed partial dentures have excellent short-term (<5 years) survival rates but the evidence for medium-term survival (>5 years) and beyond is lacking.

[Pathways and Mechanisms of Periodontitis Contributing to Adverse Pregnancy Outcomes].

Periodontitis is a chronic oral inflammatory disease with a high incidence in the global population. Periodontal pathogens can colonize and infect multiple human tissues and organs through blood transmission, which is an important risk factor of many systemic diseases. Recently, the correlation between periodontitis and adverse pregnancy outcomes (APOs) has attracted growing research interest. Herein, we systematically reviewed the research progress in the relationship between periodontitis and APOs and summarized reported findings on the pathways and mechanisms by which periodontitis contributes to APOs. We also clarified that intrauterine infection caused by oral pathogens transmitted through blood is an important pathway by which periodontitis interferes with pregnancy. In addition, further research focused on the discovery of more APOs-related oral pathogenic bacteria and their virulence factors, analysis of the interaction between pathogenic bacteria and placental tissue, and pathogenic pathways of oral bacterial invasion of the fetus will promote thorough analysis of the specific molecular mechanism of how periodontitis affects APOs. Furthermore, the validation of the results of human population-based studies through animal/cell experiments and the translation into effective intervention strategies are of great clinical significance to the prevention and control of the occurrence and development of APOs.