The Influence of pH Value on the Microstructure and Properties of Strontium Phosphate Chemical Conversion Coatings on Titanium.

Strontium (Sr) is a trace element in the human body that can promote bone formation and inhibit bone absorption. A conversion coating of strontium phosphate (Sr-P) on the surface of titanium (Ti) can improve its biological properties and has many potential applications in the fields of dentistry and orthopedics. In the present study, Sr-P coatings with SrHPO4 and Sr3(PO4)2 crystals on Ti are prepared by a phosphate chemical conversion (PCC) treatment and the effect of pH values on the properties of the Sr-P coatings is researched. The results prove that the phase composition, morphology, and corrosion resistance of the coated Ti vary according to the pH values of the PCC solution. The morphology of the conversion deposition on Ti changes from plat-like to cluster-like and then to homogeneous microcrystals as the pH value changes from 2.50 to 3.25. Only discrete SrHPO4 crystals are generated on the substrate at lower pH values, while relatively stable Sr3(PO4)2 and SrHPO4 crystals grow and subsequently form an integrated coating on the Ti as the pH exceeds 2.50. The cross-sectional morphologies and bonding strength of different coatings are also researched. The corrosion resistance of coated Ti improves compared with that of bare Ti because of the Sr-P coatings with a Sr3(PO4)2 phase. In addition, it is indicated that the Sr-P coatings on Ti can improve the adhesion and differentiation of BMSCs.

Effect of Reaction Temperature on the Microstructure and Properties of Magnesium Phosphate Chemical Conversion Coatings on Titanium.

Magnesium phosphate (MgP) has garnered growing interest in hard tissue replacement processes due to having similar biological characteristics to calcium phosphate (CaP). In this study, an MgP coating with the newberyite (MgHPO4·3H2O) was prepared on the surface of pure titanium (Ti) using the phosphate chemical conversion (PCC) method. The influence of reaction temperature on the phase composition, microstructure, and properties of coatings was systematically researched with the use of an X-ray diffractometer (XRD), a scanning electron microscope (SEM), a laser scanning confocal microscope (LSCM), a contact angle goniometer, and a tensile testing machine. The formation mechanism of MgP coating on Ti was also explored. In addition, the corrosion resistance of the coatings on Ti was researched by assessing the electrochemical behavior in 0.9% NaCl solution using an electrochemical workstation. The results showed that temperature did not obviously affect the phase composition of the MgP coatings, but affected the growth and nucleation of newberyite crystals. In addition, an increase in reaction temperature had a great impact on properties including surface roughness, thickness, bonding strength, and corrosion resistance. Higher reaction temperatures resulted in more continuous MgP, larger grain size, higher density, and better corrosion resistance.

Effect of Substrates Performance on the Microstructure and Properties of Phosphate Chemical Conversion Coatings on Metal Surfaces.

Phosphate chemical conversion (PCC) technology has attracted extensive attention for its ability to regulate the surface properties of biomedical metals. However, titanium (Ti)-based alloys exhibit inertia because of the native passive layer, whereas zinc (Zn)-based alloys show high activity in acidic PCC solutions. The substrate performance affects the chemical reaction in the phosphating solution, which further leads to diversity in coating properties. In this work, the zinc-phosphate (ZnP) coatings are prepared on Ti alloy (TA) and Zn alloy (ZA) substrates using the PCC method, respectively. The coatings prepared herein are detected by a scanning electron microscope (SEM), X-ray diffractometer (XRD), laser scanning confocal microscope (LSCM), universal testing machine, contact angle goniometer, and electrochemical workstation system. The results show that the substrate performance has little effect on the phase composition but can significantly affect the crystal microstructure, thickness, and bonding strength of the coatings. In addition, the ZnP coatings improve the surface roughness of the substrates and show good hydrophilicity and electrochemical corrosion resistance. The formation mechanism of the ZnP coating is revealed using potential-time curves, indicating that the metal-solution interfacial reaction plays a dominant role in the deposition process.

Enhanced oral bioavailability of 10-hydroxycamptothecin through the use of poly (n-butyl cyanoacrylate) nanospheres.

The article describes the preparation, physicochemical characterization, drug release, and in vivo behavior of 10-hydroxycamptothecin-loaded poly (n-butyl cyanoacrylate) (PBCA) nanospheres (HCPT-PBCA-NSs). HCPT-PBCA-NSs were successfully prepared via emulsion polymerization of n-butyl cyanoacrylate (BCA) monomer in acidic medium with the aid of two colloidal stabilizers (Poloxamer 188 and Dextran 70). The influence of pH, the time of polymerization, and the dosage of the drug on particle size and encapsulation efficiency (EE) were studied. HCPT-PBCA-NSs were of spherical shape and uniformly dispersed with a particle size of 135.7 nm, and zeta potential of -18.18 mV. EE, drug loading (DL), and yield of HCPT-PBCA-NSs were 51.52, 0.63, and 88.25%, respectively. FTIR, 1H NMR, and DSC showed complete polymerization of BCA monomer and HCPT existed in the form of molecular or amorphous in NSs. In vitro release of the drug from HCPT-PBCA-NSs exhibited sustained-release behavior with an initial burst release and about 60% of HCPT was released from the formulation within 24 h of dialysis. The pharmacokinetic study in healthy rats after oral administration showed that encapsulation of HCPT into PBCA-NSs increased the Cmax about 3.84 times and increased AUC0-t about 5.40 times compared with that of HCPT suspension. It was concluded that PBCA-NSs could be a promising drug carrier to load HCPT for oral drug delivery if efforts are made in the future to improve its poor DL capacity.

Construction of Magnesium Phosphate Chemical Conversion Coatings with Different Microstructures on Titanium to Enhance Osteogenesis and Angiogenesis.

Titanium (Ti) and its alloys are widely used as hard tissue substitutes in dentistry and orthopedics, but their low bioactivity leads to undesirable osseointegration defects in the early osteogenic phase. Surface modification is an important approach to overcome these problems. In the present study, novel magnesium phosphate (MgP) coatings with controllable structures were fabricated on the surface of Ti using the phosphate chemical conversion (PCC) method. The effects of the microstructure on the physicochemical and biological properties of the coatings on Ti were researched. The results indicated that accelerators in PCC solution were important factors affecting the microstructure and properties of the MgP coatings. In addition, the coated Ti exhibited excellent hydrophilicity, high bonding strength, and good corrosion resistance. Moreover, the biological results showed that the MgP coatings could improve the spread, proliferation, and osteogenic differentiation of mouse osteoblast cells (MC3T3-E1) and vascular differentiation of human umbilical vein endothelial cells (HUVECs), indicating that the coated Ti samples had a great effect on promoting osteogenesis and angiogenesis. Overall, this study provided a new research idea for the surface modification of conventional Ti to enhance osteogenesis and angiogenesis in different bone types for potential biomedical applications.

Effect of the magnitude of condylar head displacement on the TMJ function in skeletal class II patients undergoing different degrees of mandibular advancement: A retrospective comparative study.

PURPOSE: This study aimed to compare the condylar head displacement (CHD) after bilateral sagittal split ramus osteotomy (BSSO) between different degrees of mandibular advancement in skeletal class II patients and to evaluate whether the temporomandibular joint (TMJ) function would be affected. PATIENTS AND METHODS: Fifty-nine patients (118 condyles) were included in this retrospective study and were divided into three groups based on the distance of mandibular advancement. The CHD in three directions, x (sagittal direction), y (coronal direction), and z (axial direction), was measured before operation (T0), immediately after operation (T1), and at least 6 months after operation (T2), and the TMJ function of patients was followed up and scored using the Helkimo index system. All the abovementioned data were statistically analyzed, and p < 0.05 was considered the statistical difference standard. RESULT: During the BSSO surgery, the condyle was predominantly displaced in a lateral, posterior, and superior direction whenever in T1 and T2, even though the degree of CHD was different. Regarding the amount of CHD, the large advancement group was higher than the other two groups in T1 and T2 (p＜0.01). The Helkimo index scores of the three groups were evaluated, and there was no significant statistical difference between the Ai and Di index of the three groups. CONCLUSION: In our center, CHD occurred in lateral, posterior, and superior directions following mandibular advancement in skeletal class II patients, with a positive correlation between the CHD and the mandibular advancement; however, the TMJ function of the three groups did not show significant differences.

Calcium-Zinc Phosphate Chemical Conversion Coating Facilitates the Osteointegration of Biodegradable Zinc Alloy Implants by Orchestrating Macrophage Phenotype.

Zinc (Zn) alloys provide a new generation for orthopedic applications due to their essential physiological effects and promising degradation properties. However, excessive release of Zn ions (Zn2+ ) during degradation and the severe inflammatory microenvironment are not conducive to osseointegration, which is determined by the characteristics of the implant surface. Therefore, it is essential to modulate the release rate of Zn alloys by surface modification technology and endow them with anti-inflammatory and osteogenic effects. In this study, two kinds of phosphate chemical conversion (PCC) coatings with different compositions and morphological structures are prepared, namely Zn-P (with disk-like crystals) and Ca-Zn-P (with lamellar crystals). Although all the PCC-coated Zn implants have low cytotoxicity, Ca-Zn-P show better osteoimmunomodulation effects in several aspects: the induction of the M2-phenotype macrophage polarization and thus promotion of osteogenesis in vitro; the regulation of the bone immune microenvironment which is conducive to tissue regeneration and osseointegration in vivo; and the release of ions (through PI3K/AKT and Wnt signaling pathways) and the morphological structures (through RhoGTPase signaling pathways) act as possible mechanisms of M2 polarization. The Ca-Zn-P coating can be considered to provide new insights into bone immunomodulation and osseointegration.

Rice straw pretreatment using cow breeding wastewater for methane production.

The aim of this study was to investigate the pretreatment of rice straw using cow breeding wastewater. The effects of filtering cow breeding wastewater through rice straw and microaerobic treatment on the pretreatment characteristics and methane production of rice straw were investigated. Generally, the filtration improved the pretreatment effect by adsorbing ammonium nitrogen and achieved higher solids loading for pretreatment. Although airtight treatment was optimal, the lignin removal and methane production of semi-sealed rice straw were only slightly lower than those of sealed rice straw. However, the results of open treatment were similar to those of the control. The maximum lignin removal and methane production reached 68.08% and 292.62 L/kg volatile solids (VS), respectively, for the filtered rice straw soaked in cow breeding wastewater again during pretreatment, and 61.26% and 274.18 L/kg VS, respectively, for the filtered rice straw pretreated directly without soaking.

Nanoparticles based on chitosan hydrochloride/hyaluronic acid/PEG containing curcumin: In vitro evaluation and pharmacokinetics in rats.

Nanoparticles based on chitosan hydrochloride (CSH)-hyaluronic acid (HA)-PEG were prepared for delivering curcumin (CUR) (CUR-PNPs) to brain tumor. CUR-PNPs of 245.9nm and spherical morphology were obtained at optimized CSH/HA/PEG20000/CUR ratios with negative charge of about -27.2mV and EE of approximately 93.3%. Cytotoxicity studies showed that CUR-PNPs improved drug's anticancer activity in rat glioma cells (C6). The cellular uptake mechanism study showed active targeting of CUR-PNPs into C6 cells by HA mediated endocytosis. Clathrin-coated pit mediated endocytosis, clathrin-mediated endocytosis and macropincytosis were also identified as the entry pathways of PNPs into C6 cells. Pharmacokinetics of preparations in rats after i.v. administration further proved the superiority of CUR-PNPs (3.98 times greater than the area under the curve of CUR solution). In conclusion, CUR-PNPs might be a promising carrier for the therapy of brain tumors.