Toxic effects of polystyrene nanoplastics and polybrominated diphenyl ethers to zebrafish (Danio rerio).

Nanoplastics (NPs) are good carriers of persistent organic pollutants (POPs) such as polybrominated diphenyl ethers (PBDEs), and can alter their bioavailability and toxic impacts to aquatic organisms. This study highlights the single and combined toxic effects of polystyrene nanoplastics (PS-NPs) and 2,2',4,4'-tetrabromodiphenyl ether (BDE-47, one of the dominant congeners of PBDEs) on zebrafish embryos after an exposure duration of up to 120 hpf. Results showed that PS-NPs and BDE-47 co-exposure exacerbated the morphological deformities in terms of pericardial edema, yolk sac edema and curved tail in zebrafish larvae. Compared to BDE-47 single exposure, the combined exposure caused lower survival rates, shorter body lengths, and accelerated spontaneous movements. Further, PS-NPs were quickly aggregated on the surface of the embryonic chorions covered almost the entire membrane at 12 and 48 hpf, and concentration dependent accumulation was also found in the brain, mouth, trunk, gills, heart, liver and gastrointestinal tract at the larval stages. During the recovery period (7 days), PS-NPs were released from all the organs, with the highest elimination from the gastrointestinal tract. Histopathological examination revealed that co-exposure caused greater damage to retinal structures, muscle fibers and cartilage tissues. Responses of hypothalamic-pituitary-thyroid axis (CRH, TSHß, NIS, TTR, Dio2, TG, TRα and TRß) and reproduction (Esr2 and Vtg1) related genes were also investigated, and results showed that the co-exposure induced more significant upregulated expressions of TSHß, TG, Doi 2, and TRß, compared to BDE-47 single exposure. In conclusion, co-exposure to NPs and BDE-47 exacerbated developmental and thyroid toxicity in zebrafish, generally elucidating the toxicological effects mediated by complex chemical interactions between NPs with POPs in the freshwater environment.

Improving Hydrophilicity and Inducing Bone-Like Apatite Formation on PPBES by Polydopamine Coating for Biomedical Application.

Copoly(phthalazinone biphenyl ether sulfone) (PPBES) as a commercially available polyarylether is a promising orthopaedic implant material because its mechanical properties are similar to bone. However, the bioinert surface of polyarylether causes some clinical problems after implantation, which limits its application as an implant material. In this study, the surface of PPBES was modified by a biomineralization method of polydopamine-assisted hydroxyapatite formation (pHAF) to enhance its cytocompatibility. Polydopamine (PDA) coating, inspired by the adhesion mechanism of mussels, can readily endow PPBES with high hydrophilicity and the ability to integrate via the bone-like apatite coating. PPBES and PDA-coated PPBES were evaluated by scanning electronic microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and contact angle measurement. The water contact angles were reduced significantly after coating with PDA. PDA was successfully synthesized on PPBES and more PDA was obtained by increasing the temperature. Bone-like apatite on PPBES (apatite-coated PPBES) was confirmed by SEM and transmission electron microscopy (TEM). The cytotoxicity of pristine PPBES and apatite-coated PPBES were characterized by culturing of NIH-3T3 cells. Bone-like apatite synthesized by pHAF could further enhance cytocompatibility in vitro. This study provides a promising alternative for biofunctionalized PPBES with improved cytocompatibility for bone implant application.

Stabilization of Apatite Coatings on PPENK Surfaces by Mechanical Interlocking to Promote Bioactivity and Osseointegration In Vivo.

Apatite coatings with high stability can effectively improve the surface bioactivity and osteogenic activity of implant materials. In clinical practice, the ability of apatite coatings to bond with the substrate is critical to the effect of implants. Here, we propose a strategy to construct a three-dimensional (3D) nanoporous structure on the surface of a poly(phthalazinone ether nitrile ketone) (PPENK) substrate and introduce a polydopamine (PDA) coating with grafted phosphonate groups to enhance the overall deposition of a bone-like apatite coating in the 3D nanoporous structure during mineralization. This method leads to a mechanical interlocking between the apatite coating and the substrate, which increases the stability of the apatite coating. The apatite coating confers a better bioactive surface to PPENK and also promotes osteogenic differentiation and adhesion of MC3T3-E1 osteoblasts in vitro. The samples are then implanted into rat femurs to characterize in vivo osseointegration. Micro-CT data and histological staining of tissue sections reveal that PPENK with a stable apatite coating induces less fibrous capsule formation and no inflammatory response and promotes osteogenic differentiation and bone-bonding strength. This enhances the long-term use of PPENK implant materials and shows great potential for clinical application as orthopedic implants.

Effects of micro(nano)plastics on higher plants and the rhizosphere environment.

Microplastic/nanoplastic (MP/NP) pollution has emerged as one of the world's most serious environmental issues, with the potential for grave consequences for ecosystems and human health. This review summarizes the current literature on the impacts of MPs/NPs on higher plants to reveal their phytotoxicity. MPs/NPs can be absorbed into plant roots and then enter and translocate to other tissues by transpirational pull. The interaction between plastic particles and plants not only causes oxidative stress but also induces adverse impacts on photosynthesis, metabolism, genetic expression, and other growth parameters. Furthermore, the combination of MP/NP pollution with other contaminants makes the joint effect more complex. The phytotoxicity of MPs/NPs depends on the characteristics of the plastic particles (exposure dose, size, shape, type, age, and surface charge) and of the plants (species, tissues, and growth stage). The ecotoxicity of MPs/NPs in plant species' surrounding habitats is also discussed. MPs/NPs can alter soil characteristics such as soil structure, water holding capacity, and pH in the rhizosphere. In addition, the rhizosphere microbial community composition and diversity were observed to change in the presence of MPs/NPs. Therefore, MPs/NPs can indirectly affect plant growth by changing the soil properties and the microbial community. In addition, suggestions for future study directions were also given. In summary, this review highlights the potential effects of MPs/NPs on higher plants and the surrounding environment and calls for additional studies to be carried out on the impact of plastic particles on the ecosystem and human health.

A novel BiOX photocatalyst for the "green" degradation of polymers used in oilfields.

The wastes from functional polymers (polyanionic cellulose, polyacrylamide, potassium polyacrylamide, and hydroxyethyl cellulose) generated during oil and gas exploration and development are harmful to biodiversity and human health. However, most traditional treatments are inefficient in degradation and cause secondary pollution. In this paper, BiOBr0.5Cl0.5 a 3D flower-like solid solution with in-situ deposition of elementary substance Bi and surface oxygen vacancies was synthesized by the hydrolysis and the redox methods. The chemical compositions, the morphologies, and the UV-visible absorption properties of Bi/BiOBr0.5Cl0.5 were characterized. Moreover, the photocatalytic activity of Bi/BiOBr0.5Cl0.5 and the kinetic behavior of the RhB photocatalytic degradation were investigated. The photocatalytic degradation of RhB followed a pseudo-first-order kinetic reaction, and Bi/BiOBr0.5Cl0.5-0.3 demonstrated the highest photocatalytic activity: The RhB degradation efficiency of Bi/BiOBr0.5Cl0.5-0.3 was 85%, and the COD removal rate of the functional polymers conducted by Bi/BiOBr0.5Cl0.5-0.3 was greater than 80%. The exciton photocatalytic processes of Bi/BiOBr0.5Cl0.5 was found through the electron spin resonance (ESR) and the active-species trapping analyses of the photocatalytic degradations of RhB by Bi/BiOBr0.5Cl0.5. In summary, in this paper, the synthesis methods of Bi/BiOBr0.5Cl0.5 photocatalyst and the photocatalytic activity of the Bi/BiOBr0.5Cl0.5 on the degradations of polymers used in oilfields were reported, addressing the shortcomings of the existing treatments for polymer waste fluids that are incorporated into the oil and gas exploration and development process.

Occurrence and ecological impact of microplastics in aquaculture ecosystems.

Extensive applications of plastic in human life has caused substantial microplastic pollution in the global environment, which, due to plastic's ubiquitous nature and everlasting ecological impact, has caused worldwide concern. In aquatic ecosystems, microplastics are ingested by aquatic animals, affecting their growth and development and resulting in trophic transfer to higher organisms in the food chain. Therefore, consumption of aquatic products is a main primary source of human exposure to microplastics. Recently, aquaculture production has experienced tremendous growth and will exceed production from fish catch soon. Because they constitute an important source of protein in the human food supply, aquaculture products contaminated with microplastics directly affect food quality and safety. The present review summarizes documented studies regarding the occurrence and distribution of microplastics in various aquaculture systems and species and compares microplastic pollution in aquaculture species and captured species. Microplastics in aquaculture environments mainly come from exogenous imports, such as plastic waste and debris from the land, tourism, shipping transportation and atmospheric deposition. In addition, the use of plastic gear and equipment, aquaculture feed and health products, and special aquaculture environments contribute to a higher accumulation of microplastics. We also discuss the adverse effects of microplastics in aquaculture species and the potential health risks of microplastics to humans through the food chain. In summary, this review highlights the effects of microplastic pollution in aquaculture, particularly the ecological impacts on aquaculture species and associated human health implications, and calls for restricted control of microplastics in aquaculture ecosystems.

Microplastics Environmental Effect and Risk Assessment on the Aquaculture Systems from South China.

The small size of microplastics and their wide distribution in water environments have attracted worldwide attention and heated discussion, because of their ingestion by aquatic organisms. At present, there are few studies on microplastics pollution in freshwater aquaculture ponds, especially shrimp ponds. In this study, the aquaculture ponds in the Pearl River Estuary were investigated. The abundance and composition of microplastics in different environmental media were studied to explore the potential sources and risk levels of microplastics, so as to provide basic data for the study of microplastics pollution in aquaculture ponds. Microplastics were observed in water and sediment samples at all sampling sites, with the abundance of 6.6 × 103-263.6 × 103 items/m3 (surface water) and 566.67-2500 items/kg (sediment), respectively. Thirty-seven individuals collected in six ponds belong to four species. Microplastics were observed in the gastrointestinal tract (GIT) of all fishes and shrimps, with the abundance ranging from 3-92 items/individual (fish) and 4-21 items/individual (shrimp). Among all samples, microplastics with the size range of <1 mm and fiber shape were the most common. The main microplastic components were cellulose, polypropylene (PP), and polyethylene (PE). The results of potential risk assessment showed that the pollution investigation of microplastics should not only consider the abundance. Low abundance does not mean low risk. Taking the toxicity score and abundance of microplastics as evaluation indexes to reflect the pollution status of microplastics may make the results more reliable.

Enhancing Tissue Adhesion and Osteoblastic Differentiation of MC3T3-E1 Cells on Poly(aryl ether ketone) by Chemically Anchored Hydroxyapatite Nanocomposite Hydrogel Coating.

Tissue adhesion to bone implant and osteoblastic differentiation are the key factors to achieve poly(aryl ether ketone) (PAEK) implant osseointegration. However, physical interaction of implant with tissue and hydroxyapatite coating suffers from slow implant tissue integration and lack of long-term stability. In this study, a novel poly(phthalazinone ether sulfone ketone) containing allyl groups (APPBAESK) is coated onto PPBESK sheet for reacting with the allyl groups of the hydrogel coating to enhance its stability. N-Succinimidyl (NHS)-ester activated group and nano-hydroxyapatite (nano-HA) are introduced into the hydrogel synthesized from gelatin methacrylate (GelMA) and acrylic acid to construct a nanocomposite hydrogel coating on PPBESK which is a promising PAEK implant material. The hydrophilicity of the PPBESK sheet is improved by the hydrogel coating. The chemical components of the nanocomposite hydrogel coating are confirmed by X-ray photoelectron spectroscope, Attenuated total reflection infrared, and X-ray powder diffraction. The tissue shear adhesion strength of the hydrogel coating toward pig skin is enhanced due to the synergism of NHS-ester activated group and nano-HA. The osteogenic differentiation of MC3T3-E1 preosteoblasts is promoted by nano-HA in nanocomposite hydrogel coating. Therefore, the bifunctional nanocomposite hydrogel coating provides a great application prospect in the surface modification of PAEK implants in bone tissue engineering.