Polypyrrole-Stabilized Polypeptide for Eco-Friendly Supercapacitors.

As an energy storage technology, supercapacitors (SCs) have become an important part of many electronic systems because of their high-power density, long cycle life, and maintenance-free characteristics. However, the widespread development and use of electronics, including SCs, have led to the generation of a large amount of e-waste. In addition, achieving compatibility between stability and biodegradability has been a prominent challenge for implantable electronics. Therefore, environmentally friendly SCs based on polypyrrole (PPy)-stabilized polypeptide (FF) are demonstrated in this study. The fully degradable SC has a layer-by-layer structure, including polylactic acid/chitosan (PLA-C) support layers, current collectors (Mg), FF/PPy composite layers, and a polyvinyl alcohol/phosphate buffer solution (PVA/PBS) hydrogel. It has the advantages of being light, thin, flexible, and biocompatible. After 5000 cycles in air, the capacitance retention remains at up to 94.7%. The device could stably operate for 7 days in a liquid environment and completely degrade in vitro within 90 days without any adverse effect on the environment. This work has important implications for eco-friendly electronics and will have a significant impact on the implantable biomedical electronics.

Enhanced Antibacterial Ability of Electrospun PCL Scaffolds Incorporating ZnO Nanowires.

The infection of implanted biomaterial scaffolds presents a major challenge. Existing therapeutic solutions, such as antibiotic treatment and silver nanoparticle-containing scaffolds are becoming increasingly impractical because of the growth of antibiotic resistance and the toxicity of silver nanoparticles. We present here a novel concept to overcome these limitations, an electrospun polycaprolactone (PCL) scaffold functionalised with zinc oxide nanowires (ZnO NWs). This study assessed the antibacterial capabilities and biocompatibility of PCL/ZnO scaffolds. The fabricated scaffolds were characterised by SEM and EDX, which showed that the ZnO NWs were successfully incorporated and distributed in the electrospun PCL scaffolds. The antibacterial properties were investigated by co-culturing PCL/ZnO scaffolds with Staphylococcus aureus. Bacterial colonisation was reduced to 51.3% compared to a PCL-only scaffold. The biocompatibility of the PCL/ZnO scaffolds was assessed by culturing them with HaCaT cells. The PCL scaffolds exhibited no changes in cell metabolic activity with the addition of the ZnO nanowires. The antibacterial and biocompatibility properties make PCL/ZnO a good choice for implanted scaffolds, and this work lays a foundation for ZnO NWs-infused PCL scaffolds in the potential clinical application of tissue engineering.

A Phase-Changing Polymer Film for Broadband Smart Window Applications.

Smart windows (SWs) with tunable opacity are sought to regulate solar-irradiation and privacy protection. A new smart window material based on a phase-changing polymer that can be reversibly switched between a semicrystalline, opaque state and an amorphous, transparent state is introduced. The polymer film is a network of the phase-changing poly(stearyl acrylate) crosslinked with a poly(ethylene oxide) oligomer. The two constituent polymers show strong phase separation. The transmission switching of the resulting copolymer film is resulted from the combination of three different mechanisms: reversible phase changing of the poly(stearyl acrylate) component, phase separation between the two distinct constituent polymers, and a large change of refractive index of the phase-changing polymer during the amorphous-to-semicrystalline transition. The opaqueness switching can be reversed and repeated for more than 500 cycles of heating and cooling. A silver nanowire (AgNW)-based transparent heater is combined with the SW film to control the semicrystalline-to-amorphous phase transition. The resulting smart window exhibits a high infrared transmittance modulation (ΔTIR ) of 80.4% and solar transmittance modulation (ΔTsolar ) of 70.2%, which significantly outperform existing thermochromic smart windows.

A Gold Nanoclusters Film Supported on Polydopamine for Fluorescent Sensing of Free Bilirubin.

Serum bilirubin is an important biomarker for the diagnosis of various types of liver diseases and blood disorders. A polydopamine/gold nanoclusters composite film was fabricated for the fluorescent sensing of free bilirubin. Bovine serum albumin (BSA)-stabilized gold nanoclusters (AuNCs) were used as probes for biorecognition. The polydopamine film was utilized as an adhesion layer for immobilization of AuNCs. When the composite film was exposed to free bilirubin, due to the complex that was formed between BSA and free bilirubin, the fluorescence intensity of the composite film was gradually weakened as the bilirubin concentration increased. The fluorescence quenching ratio (F0/F) was linearly proportional to free bilirubin over the concentration range of 0.8~50 µmol/L with a limit of detection of 0.61 ± 0.12 µmol/L (S/N = 3). The response was quick, the film was recyclable, and common ingredients in human serum did not interfere with the detection of free bilirubin.

Lipid nano-bubble combined with ultrasound for anti-keloids therapy.

Keloids were characterized by excessive growth of fibrous tissues, and shared several pathological characteristics with cancer. They did put physical and emotional stress on patients in that keloids could badly change appearance of patients. N-(4-hydroxyphenyl) retinamide (4HPR) showed cytotoxic activity on a wide variety of invasive-growth cells. Our work was aim to prepare N-(4-hydroxyphenyl) retinamide-loaded lipid microbubbles (4HPR-LM) combined with ultrasound for anti-keloid therapy. 4HPR-loaded liposomes (4HPR-L) were first prepared by film evaporation method, and then 4HPR-LM were manufactured by mixing 4HPR-L and perfluoropentane (PFP) with ultrasonic cavitation method. The mean particle size and entrapment efficiency 4HPR-LM were 113 nm and 95%, respectively. The anti-keloids activity of 4HPR-LM was assessed with BALB/c nude mice bearing subcutaneous xenograft keloids model. 4HPR-LM, combined with ultrasound, could significantly induce apoptosis of keloid fibroblasts in vitro and inhibited growth of keloids in vivo. Thus, 4HPR-LM could be considered as a promising agent for anti-keloids therapy.

Optimization and evaluation of pluronic lecithin organogels as a transdermal delivery vehicle for sinomenine.

The purpose of the present study was to prepare and optimize sinomenine (SIN) pluronic lecithin organogels system (PLO), and to evaluate the permeability of the optimized PLO in vitro and in vivo. Box-Behnken design was used to optimize the PLO and the optimized formulation was pluronic F127 of 19.61%, lecithin of 3.60% and SIN of 1.27%. The formulation was evaluated its skin permeation and drug deposition both in vitro and in vivo compared with gel. Permeation and deposition studies of PLO were carried out with Franz diffusion cells in vitro and with microdialysis in vivo. In vitro studies, permeation rate (Jss) of SIN from PLO was 146.55 ± 2.93 µg/cm(2)/h, significantly higher than that of gel (120.39 µg/cm(2)/h) and the amount of SIN deposited in skin from the PLO was 10.08 ± 0.86 µg/cm(2), significantly larger than that from gel (6.01 ± 0.04 µg/cm(2)). In vivo skin microdialysis studies showed that the maximum concentration (Cmax) of SIN from PLO in "permeation study" and "drug-deposition study" were 150.27 ± 20.85 µg/ml and 67.95 µg/ml, respectively, both significantly higher than that of SIN from gel (29.66 and 6.73 µg/ml). The results recommend that PLO can be used as an advantageous transdermal delivery vehicle to enhance the permeation and skin deposition of SIN.

Polyamidoamine dendrimer liposome-mediated survivin antisense oligonucleotide inhibits hepatic cancer cell proliferation by inducing apoptosis.

Polyamidoamine dendrimer (PAMAM) is a new nanometer material, which can transfer the target genes to cells with high efficiency and lower toxicity. This study aims to evaluate antitumor effects of survivin antisense oligonucleotide (survivin-asODN) (carried by polyamidoamine dendrimer liposome) on hepatic cancer in nude mice. Hepatic cancer model was established by injecting SMMC-7721 cells subcutaneously into flanks of nude mice. Polyamidoamine dendrimer and liposome were mixed with survivin-asODN, respectively. The shape and size of complex were observed by transmission electron microscope, and zeta potential was measured by an analytical tool. Encapsulation efficiency and DNA loading level were determined by an ultraviolet spectrophotometer in centrifuging method. Expression of survivin in transplant tumor was measured by Western blotting. No significant difference appeared for diameter and envelopment ratio between PAMAM liposome-survivin-asODN and PAMAM-survivin-asODN (P > 0.05). Both zeta potential and transfection efficiency in PAMAM liposome-survivin-asODN were higher than that in PAMAM-survivin-asODN complex (P < 0.05). Expression of survivin protein and weight of tumors in transplanted tumors in PAMAM liposome-survivin-asODN group was less than that in PAMAM-survivin-asODN group (P < 0.05). Cell apoptosis rate in PAMAM liposome-survivin-asODN group was higher than that of PAMAM-survivin-asODN group (P < 0.05). In conclusion, polyamidoamine dendrimer liposome can deliver survivin-asODN into hepatic transplanted tumor cells effectively. Ployamidoamine dendrimer liposome-mediated survivin-asODN can inhibit hepatic cell proliferation by inducing apoptosis.

MXene/ZnS/chitosan-cellulose composite with Schottky heterostructure for efficient removal of anionic dyes by synergistic effect of adsorption and photocatalytic degradation.

Nowadays, dye water pollution is becoming increasingly severe. Composite of MXene, ZnS, and chitosan-cellulose material (MX/ZnS/CC) was developed to remove anionic dyes through the synergistic effect of adsorption and photocatalytic degradation. MXene was introduced as the cocatalyst to form Schottky heterostructure with ZnS for improving the separation efficiency of photocarriers and photocatalytic performance. Chitosan-cellulose material mainly served as the dye adsorbent, while also could improve material stability and assist in generation of free radicals for dye degradation. The physics and chemistry properties of MX/ZnS/CC composite were systematically inspected through various characterizations. MX/ZnS/CC composite exhibited good adsorption ability to anionic dyes with adsorption capacity up to 1.29 g/g, and excellent synergistic effects of adsorption and photodegradation with synergistic removal capacity up to 5.63 g/g. MX/ZnS/CC composite performed higher synergistic removal ability and better optical and electrical properties than pure MXene, ZnS, chitosan-cellulose material, and MXene/ZnS. After compounding, the synergistic removal percentage of dyes increased by a maximum of 309 %. MX/ZnS/CC composite mainly adsorbs anionic dyes through electrostatic interactions and catalyzes the generation of •O2-, h+, and •OH to degrade dyes, which has been successfully used to remove anionic dyes from environmental water, achieving a 100 % removal of 50 mg/L dye.

High Signal to Noise Ratio Piezoelectric Thin Film Sensor Based on Elastomer Amplification for Ambulatory Blood Pressure Monitoring.

Continuous pulse wave detection can be used for monitoring and diagnosing cardiovascular diseases, and research on pulse sensing based on piezoelectric thin films is one of the hot spots. Usually, piezoelectric thin films do not come into direct contact with the skin and need to be connected through a layer of an elastic medium. Most views think that the main function of this layer of elastic medium is to increase the adhesion between the sensor component and the skin, but there is little discussion about the impact of the elastic medium on pulse vibration transmission. Here, we conducted a detailed study on the effects of Young's modulus and the thickness of elastic media on pulse sensing signals. The results show that the waveform amplitude of the piezoelectric sensing signal decreases with the increase of Young's modulus and thickness of the elastic medium. Then, we constructed a theoretical model of the influence of elastic media on pulse wave propagation. The amplitude of the pulse wave signal detected by the optimized sensor was increased to 480%. Our research shows that by regulating Young's modulus and thickness of elastic media, pulse wave signals can undergo a similar amplification effect, which has an important theoretical reference value for achieving ambulatory blood pressure monitoring based on high-quality pulse waves.

Piezocatalytically-induced controllable mineralization scaffold with bone-like microenvironment to achieve endogenous bone regeneration.

Orderly hierarchical structure with balanced mechanical, chemical, and electrical properties is the basis of the natural bone microenvironment. Inspired by nature, we developed a piezocatalytically-induced controlled mineralization strategy using piezoelectric polymer poly-L-lactic acid (PLLA) fibers with ordered micro-nano structures to prepare biomimetic tissue engineering scaffolds with a bone-like microenvironment (pcm-PLLA), in which PLLA-mediated piezoelectric catalysis promoted the in-situ polymerization of dopamine and subsequently regulated the controllable growth of hydroxyapatite crystals on the fiber surface. PLLA fibers, as analogs of mineralized collagen fibers, were arranged in an oriented manner, and ultimately formed a bone-like interconnected pore structure; in addition, they also provided bone-like piezoelectric properties. The uniformly sized HA nanocrystals formed by controlled mineralization provided a bone-like mechanical strength and chemical environment. The pcm-PLLA scaffold could rapidly recruit endogenous stem cells, and promote their osteogenic differentiation by activating cell membrane calcium channels and PI3K signaling pathways through ultrasound-responsive piezoelectric signals. In addition, the scaffold also provided a suitable microenvironment to promote macrophage M2 polarization and angiogenesis, thereby enhancing bone regeneration in skull defects of rats. The proposed piezocatalytically-induced controllable mineralization strategy provides a new idea for the development of tissue engineering scaffolds that can be implemented for multimodal physical stimulation therapy.

A Controlled Biodegradable Triboelectric Nanogenerator Based on PEGDA/Laponite Hydrogels.

Implantable and wearable transient electronics based on nanogenerators have been applied in self-powered sensing, electrical-stimulation therapy, and other fields. However, the existing devices have a poor ability to match with the shapes of human tissues, and the degradation processes cannot meet individual needs. In this work, a PEGDA/Lap nanocomposite hydrogel was prepared that was based on biocompatible polyglycol diacrylate (PEGDA) and laponite, and a biodegradable single-electrode triboelectric nanogenerator (BS-TENG) was built. The PEGDA/Lap hydrogel has enhanced flexibility and mechanical and electrical performance. Its strain was 1001.8%, and the resistance was 10.8. The composite hydrogel had a good biocompatibility and could effectively promote the adhesion of cells. The BS-TENG could be used as a self-powered device to light an LED and serve as an active sensor for real-time monitoring of breath and various human movements. More importantly, the device could be degraded controllably without any harm. Therefore, BS-TENGs will be mainstream in diagnosis and treatment and play an important role in biomedical science.

AI Aided Analysis on Saliva Crystallization of Pregnant Women for Accurate Estimation of Delivery Date and Fetal Status.

Saliva contains similar molecular components to serum. Analysis of saliva can provide important diagnostic information about the body. Here we report an artificial intelligence (AI) aided home-based method that can let pregnant women perform daily monitoring on their pregnant status and accurate prediction on their delivery date by the pattern analysis of their salivary crystals. The method was developed based on the information obtained from our investigation on the saliva samples of 170 pregnant women about the correlation of the salivary crystal pattern with pregnant age and fetal status. It demonstrated that the patterns of salivary crystallization could act as indicators of the pregnant age, fetal state, and some medical conditions of pregnant women. On this basis, with the aid of AI recognition and analysis of the fractal dimension and some characteristic crystals in the salivary crystallization, we performed estimation on the delivery date in both quantitative and qualitative manners. The accuracy of the prediction on 15 pregnant women was satisfactory: 100% delivering in the predicted week, 93.3% within the estimated three days, and 86.7% on the day as the prediction. We also developed a simple smartphone-based AI-aided salivary crystal imaging and analysis device as an auxiliary means to let pregnant women monitor their fetal status daily at home and predict their delivery date with adequate accuracy.

Conductive Microneedle Patch with Electricity-Triggered Drug Release Performance for Atopic Dermatitis Treatment.

Atopic dermatitis (AD) is a chronic inflammatory skin disease that seriously affects the life quality of patients. Topical administration of glucocorticoids is considered to be the most effective anti-inflammatory treatment. However, due to the barrier function of skin, only less than 20% of topical drug molecules could diffuse into the skin. Therefore, it is of great importance to develop an effective strategy to improve AD therapy. In this study, we reported a two-electrode microneedle patch (t-EMNP) composed of a polylactic acid-platinum (PLA-Pt) MN array and polylactic acid-platinum-polypyrrole (PLA-Pt-PPy) MN array for improving the transdermal drug delivery efficacy. The drug loading capability of MNs could be altered by employing different polymerization times and drug concentrations. The drug release rate of MNs could be changed by applying different voltages. We further developed a controlled transdermal drug delivery system (c-TDDS) based on this two-electrode microneedle patch (t-EMNP), exhibiting the remarkable performance of the electricity-triggered drug release profile. The drugs could be released with electrical stimulation, while there was almost no drug release without electrical stimulation. For AD treatment in vivo, this MN patch with electricity-triggered drug release performance could effectively deliver more drugs into the skin compared with other controls such as dexamethasone cream, which efficiently alleviate AD. In sum, this work not only developed a smart patch for improving AD treatment but also provided a promising approach of transdermal drug delivery on demand.

Dynamic cylindrical assembly of triblock copolymers by a hierarchical process of covalent and supramolecular interactions.

We have developed a hierarchical process that combines linear triblock copolymers into concentric globular subunits through strong chemical bonds and is followed by their supramolecular assembly via weak noncovalent interactions to afford one-dimensionally assembled, dynamic cylindrical nanostructures. The molecular brush architecture forces triblock copolymers to adopt intramolecular interactions within confined frameworks and then drives their intermolecular interactions in the mixtures of organic solvent and water. In contrast, the triblock copolymers, when not preconnected into the molecular brush architectures, organize only into globular assemblies.

A Bioresorbable Dynamic Pressure Sensor for Cardiovascular Postoperative Care.

Bioresorbable electronics that can be absorbed and become part of the organism after their service life are a new trend to avoid secondary invasive surgery. However, the material limitation is a significant challenge. There are fewer biodegradable materials with pressure-sensitive properties. Here, a pressure sensor based on the triboelectric effect between bioabsorbable materials is reported. This effect is available in almost all materials. The bioresorbable triboelectric sensor (BTS) can directly convert ambient pressure changes into electrical signals. This device successfully identifies abnormal vascular occlusion events in large animals (dogs). The service life of the BTS reaches 5 days with a high service efficiency (5.95%). The BTS offers excellent sensitivity (11 mV mmHg-1 ), linearity (R2  = 0.993), and good durability (450 000 cycles). The antibacterial bioresorbable materials (poly(lactic acid)-(chitosan 4%)) for the BTS can achieve 99% sterilization. Triboelectric devices are expected to be applied in postoperative care as bioresorbable electronics.

Electrospun Scaffolds Containing Silver-Doped Hydroxyapatite with Antimicrobial Properties for Applications in Orthopedic and Dental Bone Surgery.

Preventing the development of osteomyelitis while enhancing bone regeneration is challenging, with relatively little progress to date in translating promising technologies to the clinic. Nanoscale hydroxyapatite (nHA) has been employed as a bone graft substitute, and recent work has shown that it may be modified with silver to introduce antimicrobial activity against known pathogens. The aim of this study was to incorporate silver-doped nHA into electrospun scaffolds for applications in bone repair. Silver-doped nHA was produced using a modified, rapid mixing, wet precipitation method at 2, 5, 10 mol.% silver. The silver-doped nHA was added at 20 wt.% to a polycaprolactone solution for electrospinning. Bacteria studies demonstrated reduced bacterial presence, with Escherichia coli and Staphylococcus aureus undetectable after 96 h of exposure. Mesenchymal stem cells (MSCs) were used to study both toxicity and osteogenicity of the scaffolds using PrestoBlue® and alkaline phosphatase (ALP) assays. Innovative silver nHA scaffolds significantly reduced E. coli and S. aureus bacterial populations while maintaining cytocompatibility with mammalian cells and enhancing the differentiation of MSCs into osteoblasts. It was concluded that silver-doped nHA containing scaffolds have the potential to act as an antimicrobial device while supporting bone tissue healing for applications in orthopedic and dental bone surgery.

High-Throughput and Self-Powered Electroporation System for Drug Delivery Assisted by Microfoam Electrode.

Electroporation is an effective approach for drug and gene delivery, but it is still limited by its low-throughput and severe cell damage. Herein, with a self-powered triboelectric nanogenerator as the power source, we demonstrated a high-throughput electroporation system based on the design of biocompatible and flexible polypyrrole microfoam as the electrode within the flow channel. In particular, to lower the imposed voltage, one-dimensional (1D) Ag nanowires were modified on the microfoam electrode to build up a locally enhanced electric field and reduce cell damage. The self-powered electroporation system realized a successful delivery of small and large biomolecules into different cell lines with efficiency up to 86% and cell viability over 88%. The handle throughput achieved as high as 105 cells min-1 on continuously flowed cells. The high-throughput and self-powered electroporation system is expected to have potential applications in the fields of high-throughput drug and gene delivery for in vitro isolated cells.

Novel porous Ti35Zr28Nb scaffolds fabricated by powder metallurgy with excellent osteointegration ability for bone-tissue engineering applications.

Titanium (Ti) based porous alloys have been widely used as orthopedic implants. However, the successful applications of these porous Ti alloys need to have the ability to mimic the mechanical properties of natural bone. Novel porous Ti35Zr28Nb scaffolds were fabricated via powder metallurgy (PM), and the fabricated scaffold with 61.1% porosity exhibited favorable mechanical properties with a compression yield strength of 132.5 ±â€¯3.5 MPa and an elastic modulus of 2.9 ±â€¯0.4 GPa, which are desired mechanical properties for bone implant material applications. The extracts of the porous Ti35Zr28Nb scaffolds showed no toxic effect on cell proliferation in vitro and their cytotoxicity grade was at level 0, similar to that of as-cast pure Ti and Ti-6Al-4 V alloy. Additionally, the extracellular alkaline phosphatase (ALP) level of MC3T3-E1 indicated that the bone matrix synthesis on the porous Ti35Zr28Nb scaffolds was slightly higher than that of as-cast Ti-6Al-4 V and pure Ti alloys. After implantation in rat distal femurs for 8 weeks, the porous Ti35Zr28Nb scaffolds were surrounded by new bone tissue, and the numbers of red blood cells, white blood cells, immunocyte cells, and neutrophil cells returned to the normal levels, which indicate that the porous Ti35Zr28Nb scaffolds possess good in vivo osteointegration ability and hemocompatibility. It hence can be concluded that the PM-fabricated Ti35Zr28Nb scaffolds, which have desired mechanical properties and excellent biocompatibility and osteointegration, are a promising candidate alloy for bone-tissue engineering applications in orthopedics.

Symbiotic cardiac pacemaker.

Self-powered implantable medical electronic devices that harvest biomechanical energy from cardiac motion, respiratory movement and blood flow are part of a paradigm shift that is on the horizon. Here, we demonstrate a fully implanted symbiotic pacemaker based on an implantable triboelectric nanogenerator, which achieves energy harvesting and storage as well as cardiac pacing on a large-animal scale. The symbiotic pacemaker successfully corrects sinus arrhythmia and prevents deterioration. The open circuit voltage of an implantable triboelectric nanogenerator reaches up to 65.2 V. The energy harvested from each cardiac motion cycle is 0.495 µJ, which is higher than the required endocardial pacing threshold energy (0.377 µJ). Implantable triboelectric nanogenerators for implantable medical devices offer advantages of excellent output performance, high power density, and good durability, and are expected to find application in fields of treatment and diagnosis as in vivo symbiotic bioelectronics.

A bionic stretchable nanogenerator for underwater sensing and energy harvesting.

Soft wearable electronics for underwater applications are of interest, but depend on the development of a waterproof, long-term sustainable power source. In this work, we report a bionic stretchable nanogenerator for underwater energy harvesting that mimics the structure of ion channels on the cytomembrane of electrocyte in an electric eel. Combining the effects of triboelectrification caused by flowing liquid and principles of electrostatic induction, the bionic stretchable nanogenerator can harvest mechanical energy from human motion underwater and output an open-circuit voltage over 10 V. Underwater applications of a bionic stretchable nanogenerator have also been demonstrated, such as human body multi-position motion monitoring and an undersea rescue system. The advantages of excellent flexibility, stretchability, outstanding tensile fatigue resistance (over 50,000 times) and underwater performance make the bionic stretchable nanogenerator a promising sustainable power source for the soft wearable electronics used underwater.