A composite oral hygiene score and the risk of oral cancer and its subtypes: a large-scale propensity score-based study.

OBJECTIVE: This study aimed to investigate the potential relationship between oral hygiene and the risk of oral cancer and its subtypes after controlling the effects of several confounding factors. MATERIALS AND METHODS: A large-scale case-control study was conducted from January 2010 to August 2019, recruiting a total of 1,288 oral cancer cases with newly diagnosed and 4,234 healthy controls. Propensity score matching (PSM) and inverse probability of treatment weighting (IPTW) were utilized to minimize confounding effects. Conditional logistic regression was used to evaluate the effects of oral hygiene indicators on oral cancer. RESULTS: A composite oral hygiene score was developed based on five indicators selected based on PSM and IPTW analysis (including tooth loss, dentures wearing, the frequency of tooth brushing, regular dental visits, and recurrent dental ulcer). Participants with a higher score, compared with their lower counterparts, showed a 49% increased risk (the odds ratio (OR) was 1.49 (95% confidence interval (CI): 1.26-1.75). A similar association pattern was found following IPTW analyses (OR = 1.32; 95% CI: 1.22-1.42). Of note, the adverse effects of poor oral hygiene were more evident among the sites of gingival and buccal (PSM analysis: 2.03-fold and 2.68-fold increased risk; IPTW analysis: 1.57-fold and 2.07-fold increased risk, respectively). Additionally, a greater positive association was observed between poor oral hygiene and oral squamous cell carcinoma, compared with other pathological types. CONCLUSION: This study establishes a composite oral hygiene score and provides supportive evidence of poor oral hygiene associated with a higher risk of oral cancer, particularly in the gingival and buccal mucosa sites and in the squamous cell carcinoma. CLINICAL RELEVANCE: The data highlights the importance of improving poor oral hygiene habits, which has public health implications for the prevention of oral cancer.

Facial tremor in patients with Parkinson's disease: prevalence, determinants and impacts on disease progression.

BACKGROUND: Facial (lip and jaw) tremor (FT) is associated with Parkinson's disease (PD) but few studies have been conducted to explore its clinical profile. We performed this study to investigate the prevalence and clinical correlates of FT in PD, and further to evaluate its effect on disease progression. METHODS: A retrospective, cross-sectional (n = 2224) and longitudinal (n = 674) study was conducted. The presence of FT was based on a ≥ 1 score in the United PD Rating Scale (UPDRS) item 20A. Group comparisons were conducted, followed by a forward binary logistic regression analysis. Inverse probability of treatment weighting (IPTW) based on the propensity score and weighted or unweighted Cox regression models were used to explore the impact of FT on five clinical milestones including death, UPDRS III 11-point increase, Hoehn and Yahr (H&Y) stage reaching 3, dyskinesia development, and Montreal Cognitive Assessment 3-point decrease. RESULTS: FT was presented in 403 patients (18.1%), which showed increasing trends with disease duration and H&Y score. Age (P < 0.001), female (P < 0.001), disease duration (P = 0.001), speech (P = 0.011), rigidity (P = 0.026), rest tremor on limbs (P < 0.001), kinetic tremor on hands (P < 0.001), and axial symptoms (P = 0.013) were independent factors associated with FT. Both unweighted and weighted Cox regression models indicated that baseline FT and FT as the initial symptom were not associated with the five outcomes. CONCLUSIONS: Our study suggested that FT was not uncommon and provided a deeper insight into the characteristics of FT in PD. The predict value of FT on long-term progronis of PD may need future longer follwe-up study.

Clival screw and plate fixation by the transoral approach for the craniovertebral junction: a CT-based feasibility study.

PURPOSE: A clivus screw and plate was invented and proved to strengthen the stability of the craniovertebral junction (CVJ). However, it is unclear whether the clivus screw and plate could be placed onto the CVJ by transoral approach. Therefore, the present study aims to evaluate the feasibility of clivus screw and plate placement by transoral approach and investigate its relative anatomic parameters. METHODS: A total of 80 normal adults (40 males/40 females) with an average age of 60.4 ± 11.6 years old were enrolled in this study. All parameters were measured in a supposed maximums mouth-opening status on computed tomography images, where the vertex of lower incisor was defined as Point A. The vertical intersection from Point A to extracranial clivus was defined as Point B, and its distance to the bottom of clivus was measured as B length. Point B was considered as ideal screw entry point. All the cases were divided into three types based on the location of Point B: above the top portion (Type 1), between the top and bottom portion (Type 2), and below the bottom portion (Type 3) of extracranial clivus. The B Length was defined as a minus value if the case belonged to Type 3. The anterior skull base angle, the angles between tangent of extracranial clivus and the lines from Point A to different parts of clivus, and distances between Point A and clivus and C1-3 vertebra were also measured. RESULTS: One in eighty cases (1.2%) belonged to Type 1 with a B Length of 32.12 mm. Most cases (61.3%) were Type 2 with a B Length of 8.7 mm, while Type 3's was - 9.7 mm occupying for 37.5%. Significant statistic differences were found in anterior skull base angle between these three types (128.9°, 122.7° and 118.5° for Type 1, 2 and 3, respectively). The distances from Point A to the top and bottom portion of the clivus and the pharyngeal tubercle were 97.5, 96.0 and 96.8 mm, respectively. The angles between the tangent of the clivus and the lines from Point A to the above three structures were 75.7°, 92.3° and 84.0°, respectively. The distances from Point A to the middle point of anterior margin of C1 anterior tubercle, C2 vertebra and C3 vertebra were 79.1, 73.4 and 61.5 mm, respectively. CONCLUSION: The clivus screw and plate placement could be accomplished with optimal screw angle by transoral approach in most of patients. Mandibular splitting would be needed in patients with greater anterior skull angle. These slides can be retrieved under Electronic Supplementary Material.

Anterior Transarticular Crossing Screw Fixation for Atlantoaxial Joint Instability: A Biomechanical Study.

OBJECTIVE: To evaluate the biomechanical stability of anterior transarticular crossing screw (ATCS) and compare it with anterior transarticular screw (ATS) which may provide basic evidence for clinical application. METHODS: Eight human fresh cadaveric specimens (occiput-C4) were tested with 5 conditions including the intact status, the injury status (type II odontoid fracture), the injury+ATS fixation status (traditional bilateral ATS fixation); the injury+unilateral ATCS fixation status; and the injury+bilateral ATCS fixation status. Specimens were applied to a pure moment of 1.5 Nm in flexion-extension, lateral bending, and axial rotation, respectively. The range of motions (ROMs) and the neutral zones (NZs) of C1 to C2 segment were calculated and compared between 5 status. RESULTS: ATS and ATCS fixations significantly reduced the motions in all directions when compared with the intact and injury statues (p < 0.05). In flexion-extension, the ROMs of ATS, unilateral ATCS, and bilateral ATCS were 4.7° ± 2.5°, 4.1° ± 1.9°, and 3.2° ± 1.2°, respectively. Bilateral ATCS resulted in a significant decrease in ROM in flexion-extension when compared with ATS and unilateral ATCS (p = 0.035 and p = 0.023). In lateral bending and axial rotation, there was no significant difference in ROM between the 3 fixations (p > 0.05). Three fixations resulted in similar NZs in all directions (p > 0.05). CONCLUSION: ATCS is a biomechanically effective alternative or supplemental method for atlantoaxial instability.

Feasibility of Anterior Fixation with Single Screw for Odontoid Fractures in Pediatrics: A Computed Tomographic Study.

OBJECTIVE: Although it is an effective fixation technique for an unstable odontoid, anterior fixation remains challenging in pediatric populations. Our study measures the anatomical parameters of the odontoid to identify the feasibility of anterior fixation with a single screw for children. METHODS: We retrospectively collected data from 112 normal male and female children (aged between 2 and 18) in our institute from January 1, 2022 to December 31, 2022. Subjects were divided into a youth group (2-6 years old), a juvenile group (7-12 years old), and an adolescent group (13-18 years old). Sagittal and coronal computed tomography images of the upper cervical spine were used to measure the screw length, angle, and inner and outer diameters of the odontoid. One-way analysis of variance with the Tukey test was used to analyze the parameters among the groups, while the t-test was used to analyze gender differences. Correlations between parameters and age were assessed using Pearson's test. RESULTS: There were significant differences between male and female subjects in screw length and inner and outer diameters (of both sagittal and coronal views) but not in screw angle. The narrowest diameter of the odontoid was 4.0 ± 1.5 mm in the youth group, 5.5 ± 1.5 mm in the juvenile group, and 5.6 ± 1.1 mm in the adolescent group, respectively. There were significant differences among the three groups in screw length (p < 0.0001). The screw angle of the adolescent group was significantly smaller than that of the youth and juvenile groups. More than 90% of children aged 7-18 years old had an odontoid diameter greater than 4 mm, while only half of the youth group had an odontoid with diameter >4 mm. Screw length and inner and outer diameters in lateral view were positively correlated with age, and screw angle was negatively correlated with age. CONCLUSION: It is feasible to insert a standard single screw (Φ 3.5 mm) into the odontoid of children aged 7-18 years old but not those aged 2-6 years old. How the anatomical parameters of the odontoid change with age, especially the narrowest diameters, is worthy of attention.

Anterior Transarticular Crossing Screw Placement for Atlantoaxial Instability in Children: Computed Tomography-Based Study.

OBJECTIVE: The feasibility of anterior transarticular crossing screw (ATCS) fixation for atlantoaxial instability was confirmed in adults. However, atlantoaxial instability is more common in children. Therefore this study was aimed to ascertain the pediatric morphometric characteristics of ATCS in C1-2. METHODS: Morphometric analysis was conducted on computed tomography scan in 87 pediatric patients who were divided into groups based on ages (1-6 years, 7-10 years, and 11-16 years). Measurements were taken in sagittal and axial planes of computed tomography imaging to determine the range of screw lateral angles, incline angles, and screw lengths. RESULTS: The overall screw lengths were relatively longer in males than females. For those aged 1-6 years, the screw lengths were 25.5-32.8 mm in males and 24.2-31.3 mm in females, respectively. The screw lengths showed no difference in the 7- to 10-year group between sexes, while the incline angle was larger in females than males. And the screw lengths were 33.5-43.2 mm in males and 31.2-40.4 mm in females in the 11- to 16-year group. The screw lengths were increased with age, yet the lateral angles were decreased. We also found that the epiphyseal closure of odontoid reached 93.6% when the age was older than 7 years old. Therefore ATCS was recommended for children older than 7 years. CONCLUSIONS: The overall screw lengths and lateral angles of ATCS were larger in male children than those in females, but the incline angles were larger in females. ATCS is feasible in children, particularly those aged 7 years or older.