Product Selection Toward High-Value Hydrogen and Bamboo-Shaped Carbon Nanotubes from Plastic Waste by Catalytic Microwave Processing.

The escalating levels of plastic waste and energy crises underscore the urgent need for effective waste-to-energy strategies. This study focused on converting polypropylene wastes into high-value products employing various iron-based catalysts and microwave radiative thermal processing. The Al-Fe catalysts exhibited exceptional performance, achieving a hydrogen utilization efficiency of 97.65% and a yield of 44.07 mmol/g PP. The gas yields increased from 19.99 to 94.21 wt % compared to noncatalytic experiments. Furthermore, this catalytic system produced high-value bamboo-shaped carbon nanotubes that were absent in other catalysts. The mechanism analysis on catalytic properties and product yields highlighted the significance of oxygen vacancies in selecting high-value products through two adsorption pathways. Moreover, the investigation examined the variations in product distribution mechanisms between conventional and microwave pyrolysis, in which microwave conditions resulted in 4 times higher hydrogen yields. The technoeconomic assessment and Monte Carlo risk analysis further compared the disparity. The microwave technique had a remarkable internal rate of return (IRR) of 39%, leading to an income of $577/t of plastic with a short payback period of 2.5 years. This research offered sustainable solutions for the plastic crisis, validating the potential applicability of commercializing the research outcomes in real-world scenarios.

Gingipains may be one of the key virulence factors of Porphyromonas gingivalis to impair cognition and enhance blood-brain barrier permeability: An animal study.

AIM: Blood-brain barrier (BBB) disorder is one of the early findings in cognitive impairments. We have recently found that Porphyromonas gingivalis bacteraemia can cause cognitive impairment and increased BBB permeability. This study aimed to find out the possible key virulence factors of P. gingivalis contributing to the pathological process. MATERIALS AND METHODS: C57/BL6 mice were infected with P. gingivalis or gingipains or P. gingivalis lipopolysaccharide (P. gingivalis LPS group) by tail vein injection for 8 weeks. The cognitive behaviour changes in mice, the histopathological changes in the hippocampus and cerebral cortex, the alternations of BBB permeability, and the changes in Mfsd2a and Cav-1 levels were measured. The mechanisms of Ddx3x-induced regulation on Mfsd2a by arginine-specific gingipain A (RgpA) in BMECs were explored. RESULTS: P. gingivalis and gingipains significantly promoted mice cognitive impairment, pathological changes in the hippocampus and cerebral cortex, increased BBB permeability, inhibited Mfsd2a expression and up-regulated Cav-1 expression. After RgpA stimulation, the permeability of the BBB model in vitro increased, and the Ddx3x/Mfsd2a/Cav-1 regulatory axis was activated. CONCLUSIONS: Gingipains may be one of the key virulence factors of P. gingivalis to impair cognition and enhance BBB permeability by the Ddx3x/Mfsd2a/Cav-1 axis.

US/PA/MR multimodal imaging-guided multifunctional genetically engineered bio-targeted synergistic agent for tumor therapy.

Focused ultrasound ablation surgery (FUAS) is a minimally invasive treatment option that has been utilized in various tumors. However, its clinical advancement has been hindered by issues such as low safety and efficiency, single image guidance mode, and postoperative tumor residue. To address these limitations, this study aimed to develop a novel multi-functional gas-producing engineering bacteria biological targeting cooperative system. Pulse-focused ultrasound (PFUS) could adjust the ratio of thermal effect to non-thermal effect by adjusting the duty cycle, and improve the safety and effectiveness of treatment.The genetic modification of Escherichia coli (E.coli) involved the insertion of an acoustic reporter gene to encode gas vesicles (GVs), resulting in gas-producing E.coli (GVs-E.coli) capable of targeting tumor anoxia. GVs-E.coli colonized and proliferated within the tumor while the GVs facilitated ultrasound imaging and cooperative PFUS. Additionally, multifunctional cationic polyethyleneimine (PEI)-poly (lactic-co-glycolic acid) (PLGA) nanoparticles (PEI-PLGA/EPI/PFH@Fe3O4) containing superparamagnetic iron oxide (SPIO, Fe3O4), perfluorohexane (PFH), and epirubicin (EPI) were developed. These nanoparticles offered synergistic PFUS, supplementary chemotherapy, and multimodal imaging capabilities.GVs-E.coli effectively directed the PEI-PLGA/EPI/PFH@Fe3O4 to accumulate within the tumor target area by means of electrostatic adsorption, resulting in a synergistic therapeutic impact on tumor eradication.In conclusion, GVs-E.coli-mediated multi-functional nanoparticles can synergize with PFUS and chemotherapy to effectively treat tumors, overcoming the limitations of current FUAS therapy and improving safety and efficacy. This approach presents a promising new strategy for tumor therapy.

Effects of glutaraldehyde and povidone-iodine on apoptosis of grass carp liver and hepatocytes.

Since disinfectants are used all over the world to treat illnesses in people and other animals, they pose a major risk to human health. The comprehensive effects of disinfectant treatments on fish liver, especially the impacts on oxidative stress, toxicological effects, transcriptome profiles, and apoptosis, have not yet been fully analyzed. In the current investigation, healthy grass carp were exposed to 80 µg/L glutaraldehyde or 50 µg/L povidone-iodine for 30 days. First, the findings of enzyme activity tests demonstrated that the administration of glutaraldehyde could considerably increase oxidative stress by lowering T-SOD, CAT, and GPx and raising MDA. Furthermore, KEGG research revealed that exposure to glutaraldehyde and povidone-iodine stimulated the PPAR signal pathway. To further elucidate the transcriptome results, the relative expressions of related DEGs in the PPAR signal pathway were verified. Glutaraldehyde induced apoptosis in liver tissue of grass carp; however, it activated cytotoxicity and apoptosis in grass carp hepatocytes when exposed to glutaraldehyde or povidone-iodine. According to the current study, disinfectants can cause the impairment of the immune system, oxidative stress, and attenuation of the PPAR signal pathway in the liver of grass carp, making them detrimental as dietary supplements for grass carp, particularly in the aquaculture sector.

Automated Preoperative Planning Algorithm for Mandibular Angle Osteotomy Based on Anatomical Landmarks Detection: A Retrospective Study.

OBJECTIVE: The aim of the study was to develop and evaluate an automated preoperative planning algorithm based on anatomical landmark point recognition for enhancing the efficiency and intelligence of preoperative planning for mandibular angle osteotomy. METHODS: A retrospective cohort of 34 patients underwent preoperative planning with this algorithm. The present algorithm was developed using a method based on anatomical marker point recognition. The efficiency, symmetry, and safety of the automated preoperative planning and esthetics were statistically analyzed by paired t test and χ2 test. RESULTS: The results showed that the automated planning algorithm was able to achieve a great improvement in preoperative planning efficiency as well as safety and symmetry. A prospective case report of 2 patients is then reported, illustrating the safety and esthetics of the algorithm with 1-year postoperative follow-up and postoperative esthetic scores. CONCLUSION: This algorithm can help to improve the efficiency of preoperative planning for surgeons while ensuring safety and esthetics and can be further applied to other craniomaxillofacial personalized design surgeries in the preoperative design in the future.

Automated Preoperative Planning Algorithm for Mandibular Angle Osteotomy Based on Anatomical Landmarks Detection: A Retrospective Study.

OBJECTIVE: The aim of the study was to develop and evaluate an automated preoperative planning algorithm based on anatomical landmark point recognition for enhancing the efficiency and intelligence of preoperative planning for mandibular angle osteotomy. METHODS: A retrospective cohort of 34 patients underwent preoperative planning with this algorithm. The present algorithm was developed using a method based on anatomical marker point recognition. The efficiency, symmetry, and safety of the automated preoperative planning and esthetics were statistically analyzed by paired t test and χ2 test. RESULTS: The results showed that the automated planning algorithm was able to achieve a great improvement in preoperative planning efficiency as well as safety and symmetry. A prospective case report of 2 patients is then reported, illustrating the safety and esthetics of the algorithm with 1-year postoperative follow-up and postoperative esthetic scores. CONCLUSION: This algorithm can help to improve the efficiency of preoperative planning for surgeons while ensuring safety and esthetics and can be further applied to other craniomaxillofacial personalized design surgeries in the preoperative design in the future.

Dual peptides-modified cationic liposomes for enhanced Lung cancer gene therapy by a gap junction regulating strategy.

BACKGROUND: Gene therapy for lung cancer has emerged as a novel tumor-combating strategy for its superior tumor specificity, low systematical toxicity and huge clinical translation potential. Especially, the applications of microRNA shed led on effective tumor ablation by directly interfering with the crucial gene expression, making it one of the most promising gene therapy agents. However, for lung cancer therapy, the microRNA treatment confronted three bottlenecks, the poor tumor tissue penetration effect, the insufficient lung drug accumulation and unsatisfied gene transfection efficiency. To address these issues, an inhalable RGD-TAT dual peptides-modified cationic liposomes loaded with microRNA miR-34a and gap junction (GJ) regulation agent all-trans retinoic acid (ATRA) was proposed, which was further engineered into dry powder inhalers (DPIs). RESULTS: Equipped with a rough particle surface and appropriate aerodynamic size, the proposed RGD-TAT-CLPs/ARTA@miR-34a DPIs were expected to deposit into the deep lung and reach lung tumor lesions guided by targeting peptide RGD. Assisted by cellular transmembrane peptides TAT, the RGD-TAT-CLPs/ARTA@miR-34a was proven to be effectively internalized by cancer cells, enhancing gene transfection efficiency. Then, the GJ between tumor cells was upregulated by ARTA, facilitating the intercellular transport of miR-34a and boosting the gene expression in the deep tumor. CONCLUSION: Overall, the proposed RGD-TAT-CLPs/ARTA@miR-34a DPIs could enhance tumor tissue penetration, elevate lung drug accumulation and boost gene transfection efficiency, breaking the three bottlenecks to enhancing tumor elimination in vitro and in vivo. We believe that the proposed RGD-TAT-CLPs/ARTA@miR-34a DPIs could serve as a promising pulmonary gene delivery platform for multiple lung local disease treatments.

The Feasibility of Electromagnetic Navigation Technique to Achieve Preoperative Plan in Mandibular Angle Osteotomy.

BACKGROUND: In contrast to the most commonly used optical navigation system, electromagnetic navigation has huge potential in operations with a narrow field. The purpose of this experiment was to test and confirm whether the electromagnetic navigation method the authors developed for mandibular angle osteotomy (MAO) met clinical requirements. METHODS: Using a dental splint that could be repeatedly mounted on teeth, registration between surgical plan and actual field was performed automatically. RESULTS: Navigation of MAO was first performed on 10 mandibular models. The position precision measured using a coordinate measuring machine was 1.30±0.61 mm. Then, a navigation experiment was performed on 4 patients. Accuracy in actual operation measured by the NDI pointing sensor was 1.89±0.76 mm. Our noninvasive automatic registration process reduced the surgical exposure time and eliminated the bias of the manual selection of registration points. CONCLUSIONS: This preliminary study confirmed the feasibility of the electromagnetic navigation technique in terms of both applicability and accuracy in MAO surgery.

Three-dimensional Printing Technologies in Craniofacial Plastic Surgery: An Institutional Experience.

Rapid developments in 3-dimensional(3D) printing technologies in craniofacial plastic surgery have provided a new treatment modality for patients. In this article, we intend to share our institution's experience using 3D printing in 3 modes-namely, 3-dimensional printing for manufacturing contour models, guides, and implants. Fifty-nine patients were enrolled in our study between September 2009 and September 2021. Among the 3D printing-assisted technologies, 41 cases were used for congenital malformations, 82 for trauma repair, and 112 for cosmetic surgery. Preoperative design and postoperative data were compared and analyzed based on imaging data. In craniofacial plastic surgery, all patients had excellent postoperative objective bone measurements close to the preoperative design and improved esthetic appearance. Our survey of postoperative satisfaction showed that patients were quite satisfied with the surgery, especially concerning congenital deformities. Rapid prototyping 3-dimensional printing technology provides a practical and anatomically accurate means to produce patient-specific and disease-specific translational tools. These models can be used for surgical planning, simulation, and clinical evaluation. Expanding this technology in craniofacial plastic surgery will provide adequate assistance to practitioners and patients.

Radiomics and Artificial Intelligence Study of Masseter Muscle Segmentation in Patients With Hemifacial Microsomia.

BACKGROUND: Hemifacial microsomia (HFM) is one of the most common congenital craniofacial condition often accompanied by masseter muscle involvement. U-Net neural convolution network for masseter segmentation is expected to achieve an efficient evaluation of masseter muscle. METHODS: A database was established with 108 patients with HFM from June 2012 to June 2019 in our center. Demographic data, OMENS classification, and 1-mm layer thick 3-dimensional computed tomography were included. Two radiologists manually segmented masseter muscles in a consensus reading as the ground truth. A test set of 20 cases was duplicated into 2 groups: an experimental group with the intelligent algorithm and a control group with manual segmentation. The U-net follows the design of 3D RoI-Aware U-Net with overlapping window strategy and references to our previous study of masseter segmentation in a healthy population system. Sorensen dice-similarity coefficient (DSC) muscle volume, average surface distance, recall, and time were used to validate compared with the ground truth. RESULTS: The mean DSC value of 0.794±0.028 for the experiment group was compared with the manual segmentation (0.885±0.118) with α=0.05 and a noninferiority margin of 15%. In addition, higher DSC was reported in patients with milder mandible deformity ( r =0.824, P <0.05). Moreover, intelligent automatic segmentation takes only 6.4 seconds showing great efficiency. CONCLUSIONS: We first proposed a U-net neural convolutional network and achieved automatic segmentation of masseter muscles in patients with HFM. It is a great attempt at intelligent diagnosis and evaluation of craniofacial diseases.

Feasibility of a Robot-Assisted Surgical Navigation System for Mandibular Distraction Osteogenesis in Hemifacial Microsomia: A Model Experiment.

This study aimed to investigate the feasibility and accuracy of osteotomy and distractor placement using a robotic navigation system in a model surgical experiment of mandibular distraction osteogenesis for hemifacial microsomia. Imaging data from 5 patients with Pruzansky-Kaban type II (IIa: 4; IIb: 1) mandibular deformities were used to print 3D models for simulated mandibular distraction osteogenesis. In the experimental group, a robot-assisted surgical navigation system was used to perform the surgery under robotic guidance following registration, according to the preoperative design. Conventional surgery was performed in the control group, in which the operation was based on intraoperative estimations of the preoperative design by experienced surgeons. The accuracies of the osteotomy and distractor placement were assessed based on distance and angular error. Osteotomy accuracy was higher in the experimental group than in the control group, and the distance error ( t =9.311, P <0.001) and angular error ( t =5.385, P =0.001) were significantly reduced. The accuracy of distractor placement was also significantly higher in the experimental group, while the distance error ( t =3.048, P =0.016) and angular error ( t =3.524, P =0.024) were significantly reduced. The present results highlight the feasibility of robot-assisted distraction osteogenesis combined with electromagnetic navigation for improved surgical precision in clinical settings.

Transcriptome analysis of the muscle of fast- and slow-growing phoenix barb (Spinibarbus denticulatus denticulatus).

Growth rate is a commercial trait in aquaculture that is influenced by multiple factors, among which genetic composition plays a fundamental role in the growth rate of species. The phoenix barb (Spinibarbus denticulatus denticulatus) is a widely distributed freshwater fish species in South China. Although S. d. denticulatus is reared in South China, the molecular mechanisms underlying the growth rate of the species remain unclear. Here, the authors performed transcriptome analysis of muscle tissues from fast-growing (FG) and slow-growing (SG) S. d. denticulatus at 90, 150, and 300 days after hatch (DAH) to elucidate its growth mechanism. Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis revealed that differentially expressed genes (DEGs) between the two groups were enriched in pathways related to muscle growth, glycolysis, and energy and lipid metabolism. Nonetheless, a higher number of DEGs were identified in the FG vs. SG groups at 90 and 300 DAH compared with 150 DAH. DEGs identified at 90 DAH were mainly enriched in the GH/IGF axis, PI3K-Akt signalling pathway, AMPK signalling pathway and lipid metabolism highly expressed in FG individuals. DEGs identified at 300 DAH were mainly enriched in PI3K-Akt signalling pathway, glycolysis/gluconeogenesis, gene translation and lipid metabolism. In addition, some genes were expressed during the early growth stage in FG individuals but expressed during the late stage in SG individuals, indicating considerable variations in the expression profiles of growth-related genes at different developmental stages. Overall, these findings contribute to the understanding of the growth mechanism of S. d. denticulatus, which would be useful for the propagation of fast-growing breeds.

Dimensional changes of complete dentures fabricated by milled and printed techniques: An in vitro study.

STATEMENT OF PROBLEM: Information on the dimensional changes in maxillary and mandibular dentures made by using computer-aided design and computer-aided manufacturing (CAD-CAM) techniques under uniform testing conditions is lacking. PURPOSE: The purpose of this in vitro study was to evaluate the dimensional changes and reproducibility of maxillary and mandibular dentures by using CAD-CAM-milled and 3D-printed techniques. MATERIAL AND METHODS: Maxillary and mandibular edentulous models with wax occlusal rims were scanned, and dentures were designed by using a CAD software program and fabricated by using 2 techniques and materials: CAD-CAM-milled (CCM) and 3D-printed (3DP). The 3DP fabrications included 4 subgroups: dentures printed with a 90-degree build angle with UV light polymerization on the reference model (3DP 90M), dentures printed with a 90-degree build angle and light polymerization without the reference model (3DP 90), dentures printed with a 45-degree build angle with light polymerization on the reference model (3DP 45M), and dentures printed with a 45-degree build angle and light polymerization without the reference model (3DP 45). The preprocessing and postprocessing scan files of each denture produced by CCM and 3DP were superimposed by using a surface matching software program. Ten points each on maxillary and mandibular dentures were measured for deviations after processing. Additionally, for each denture, the widths were measured between the canines and molars, the anteroposterior plane from cusp tips between the canines and molars, and the vertical plane from the cusp tip of the canines to the marginal gingiva. They were then compared with those in the denture design CAD cast. The Kruskal-Wallis analysis of variance test was used for statistical analyses (α=.05). RESULTS: According to digital superimposition, CCM had the smallest values of deviation with no statistical difference (P>.05), indicating more uniform results from measurement points in both maxillary and mandibular dentures, followed by 3DP 90M, 3DP 90, 3DP 45M, and 3DP 45. Regarding the width measurements, CCM had the smallest values of deviation (P<.05). In 3DP, smaller deviation values were observed at the vertical plane from the tip of the canine to the marginal gingiva, and larger values were observed in the intermolar width (P<.05). CONCLUSIONS: CCM exhibited smaller dimensional changes and better reproducibility among the tested techniques. In 3DP, the build angle and methods of light postprocessing influenced the dimensional stability. The 90-degree build angle with additional light polymerization on the cast improved the dimensional deviations.

Distribution and influencing factors on residual pockets of the teeth in patients with periodontitis following non-surgical periodontal treatment: a retrospective observational study.

BACKGROUND: Periodontitis is a chronic and multi-factorial infectious disease. A notable difference exists in the prognosis of patients with severe periodontitis after non-surgical periodontal treatment. Thus, a retrospective study was conducted to identify common and specific factors that impact the prognosis of patients with periodontitis stage III-IV following non-surgical periodontal treatment at different tooth sites. METHODS: A total of 977 teeth were included in the study, comprising 266 patients diagnosed with periodontitis stage III-IV. This sample included 330 anterior teeth, 362 maxillary posterior teeth, and 285 mandibular posterior teeth. Following treatment, the teeth were categorized into two groups based on residual pocket depth [probing depth (PD) ≥ 5 mm] at 3 months post-treatment. The prognosis of periodontitis stage III-IV was assessed through multivariate analysis employing logistic regression to determine the association of various risk factors. RESULTS: The PD values of each site and the deepest PD values of each tooth significantly decreased at 3 months post-treatment. Residual pockets were predominantly found in the mesio/disto-buccal and mesio/disto-lingual regions. Multivariate analysis revealed that gender, PD, sulcus bleeding index (SBI) and plaque index (PLI) at baseline, and crown-root ratio in anterior teeth had a significant influence on periodontitis stage III-IV (P < 0.05). Smoking, PD, PLI and furcation involvement (FI) at baseline, PLI at 3 months post-treatment, grades of periodontitis, and crown-root ratio were prediction factors for maxillary posterior teeth. Factors such as PD, PLI and FI at baseline, PLI at 3 months post-treatment, and crown-root were significant in mandibular posterior teeth. CONCLUSIONS: The outcome of non-surgical treatment varies depending on the tooth positions for patients with periodontitis stage III-IV. Dentists must accurately identify the affected teeth that have periodontal pockets of more than 5 mm, taking into consideration the positions of the affected teeth, as well as various local and systemic factors. This comprehensive assessment will enable dentists to develop a customized and effective treatment plan.

Drug-loaded nanoparticles conjugated with genetically engineered bacteria for cancer therapy.

Drug-loaded nanoparticles have been widely used as synergists in high-intensity focused ultrasound (HIFU) tumor ablation therapy. However, these synergists have certain limitations, such as poor tumor targeting and low accumulation at the tumor site, that restrict the therapeutic efficacy of HIFU. In this study, we utilized drug-loaded nanoparticles conjugated with genetically engineered bacteria which can selectively colonize the hypoxic areas of tumor to facilitate HIFU ablation. Genetically modified Escherichia coli carrying gas vesicles (GVs-E. coli), which were gas-filled protein nanostructures, had a negatively charged surface and could specifically target into the tumor. In contrast, paclitaxel (PTX) and perfluorohexane (PFH) co-loaded cationic lipid nanoparticles (PTX-CLs) had a positively charged surface, hence, GVs-E. coli was used as a vehicle by conjugating with PTX-CLs via electrostatic adsorption and subsequently attracting more PTX-CLs to the tumor site. To improve the therapeutic efficiency of HIFU, the GVs in GVs-E. coli and PFH encapsulated in PTX-CLs could act as cavitation nuclei to enhance the HIFU cavitation effect, while PTX entrapped in PTX-CLs was released at the tumor site under HIFU irradiation, enhancing the therapeutic efficacy of HIFU and chemo-synergistic therapy. This novel combination strategy has great potential for cancer treatment.

Role of PG0192 and PG0193 in the modulation of pro-inflammatory cytokines in macrophages in response to Porphyromonas gingivalis.

Porphyromonas gingivalis is the main pathogen of chronic periodontitis. However, the specific mechanisms through which P. gingivalis induces immune and inflammatory responses in periodontitis have not been completely elucidated. In this study, we investigated the effects of the P. gingivalis outer membrane protein OmpH (encoded by PG0192 and PG0193) on interleukin-6 (IL-6) and tumor necrosis factor-α (TNF-α) expression in macrophages to assess the pro-inflammatory cytokine responses. A PG0192-PG0193 deletion mutant strain and a com△PG0192-0193 strain were constructed. Furthermore, rOmpH-1 and rOmpH-2 encoded by PG0192 and PG0193, respectively, were cloned, expressed, and purified for subsequent experiments. Notably, the expression of IL-6 and TNF-α at mRNA and protein levels was downregulated upon treatment of macrophages with the PG0192-PG0193 deletion mutant strain, whereas treatment of macrophages with P. gingivalis W83 co-incubated with rOmpH-1 or rOmpH-2 upregulated IL-6 and TNF-α mRNA levels. The addition of C5aR antagonist blocked this induction. Overall, our findings provided important insights into the roles of PG0192 and PG0193 for promoting IL-6 and TNF-α expression in macrophages exposed to P. gingivalis and revealed the involvement of C5aR in the pro-inflammatory response.

Effect of butyrate, a bacterial by-product, on the viability and ICAM-1 expression/production of human vascular endothelial cells: Role in infectious pulpal/periapical diseases.

AIM: To investigate the effects of butyric acid (BA), a metabolic product generated by pulp and root canal pathogens, on the viability and intercellular adhesion molecule-1 (ICAM-1) production of endothelial cells, which are crucial to angiogenesis and pulpal/periapical wound healing. METHODOLOGY: Endothelial cells were exposed to butyrate with/without inhibitors. Cell viability, apoptosis and reactive oxygen species (ROS) were evaluated using an MTT assay, PI/annexin V and DCF fluorescence flow cytometry respectively. RNA and protein expression was determined using a polymerase chain reaction assay and Western blotting or immunofluorescent staining. Soluble ICAM-1 (sICAM-1) was measured using an enzyme-linked immunosorbent assay. The quantitative results were expressed as mean ± standard error (SE) of the mean. The data were analysed using a paired Student's t-test where necessary. A p-value ≤0.05 was considered to indicate a statistically significant difference between groups. RESULTS: Butyrate (>4 mM) inhibited cell viability and induced cellular apoptosis and necrosis. It inhibited cyclin B1 but stimulated p21 and p27 expression. Butyrate stimulated ROS production and hemeoxygenase-1 (HO-1) expression as well as activated the Ac-H3, p-ATM, p-ATR, p-Chk1, p-Chk2, p-p38 and p-Akt expression of endothelial cells. Butyrate stimulated ICAM-1 mRNA/protein expression and significant sICAM-1 production (p < .05). Superoxide dismutase, 5z-7oxozeaenol, SB203580 and compound C (p <  .05), but not ZnPP, CGK733, AZD7762 or LY294002, attenuated butyrate cytotoxicity to endothelial cells. Notably, little effect on butyrate-stimulated sICAM-1 secretion was found. Valproic acid, phenylbutyrate and trichostatin (three histone deacetylase inhibitors) significantly induced sICAM-1 production (p < .05). CONCLUSION: Butyric acid inhibited proliferation, induced apoptosis, stimulated ROS and HO-1 production and increased ICAM-1 mRNA expression and protein synthesis in endothelial cells. Cell viability affected by BA was diminished by some inhibitors; however, the increased sICAM-1 secretion by BA was not affected by any of the tested inhibitors. These results facilitate understanding of the pathogenesis, prevention and treatment of pulpal/periapical diseases.

Hybrid robot-assisted gait training for motor function in subacute stroke: a single-blind randomized controlled trial.

BACKGROUND: Robot-assisted gait training (RAGT) is a practical treatment that can complement conventional rehabilitation by providing high-intensity repetitive training for patients with stroke. RAGT systems are usually either of the end-effector or exoskeleton types. We developed a novel hybrid RAGT system that leverages the advantages of both types. OBJECTIVE: This single-blind randomized controlled trial evaluated the beneficial effects of the novel RAGT system both immediately after the intervention and at the 3-month follow-up in nonambulatory patients with subacute stroke. METHODS: We recruited 40 patients with subacute stroke who were equally randomized to receive conventional rehabilitation either alone or with the addition of 15 RAGT sessions. We assessed lower-extremity motor function, balance, and gait performance by using the following tools: active range of motion (AROM), manual muscle test (MMT), the Fugl-Meyer Assessment (FMA) lower-extremity subscale (FMA-LE) and total (FMA-total), Postural Assessment Scale for Stroke (PASS), Berg Balance Scale (BBS), Tinetti Performance-Oriented Mobility Assessment (POMA) balance and gait subscores, and the 3-m and 6-m walking speed and Timed Up and Go (TUG) tests. These measurements were performed before and after the intervention and at the 3-month follow-up. RESULTS: Both groups demonstrated significant within-group changes in the AROM, MMT, FMA-LE, FMA-total, PASS, BBS, POMA, TUG, and 3-m and 6-m walking speed tests before and after intervention and at the 3-month follow-up (p < 0.05). The RAGT group significantly outperformed the control group only in the FMA-LE (p = 0.014) and total (p = 0.002) assessments. CONCLUSION: Although the novel hybrid RAGT is effective, strong evidence supporting its clinical effectiveness relative to controls in those with substantial leg dysfunction after stroke remains elusive. Trial registration The study was registered with an International Standard Randomized Controlled Trial Number, ISRCTN, ISRCTN15088682. Registered retrospectively on September 16, 2016, at https://www.isrctn.com/ISRCTN15088682.

Assessment of an Artificial Intelligence Mandibular Osteotomy Design System: A Retrospective Study.

BACKGROUND: In this study, an AI osteotomy software was developed to design the presurgical plan of mandibular angle osteotomy, which is followed by the comparison between the software-designed presurgical plan and the traditional manual presurgical plan, thus assessing the practicability of applying the AI osteotomy software in clinical practices. METHODS: (1) Develop an AI osteotomy software: design an algorithm based on convolutional neural networks capable of learning feature point and processing clustering segmentation; then, select 2296 cases of successful 3D mandibular angle osteotomy presurgical plans, followed by using those 2296 cases to train the deep learning algorithm; (2) compare the osteotomy presurgical plan of AI osteotomy software and that of manual: first step: randomly selecting 80 cases of typical female head 3D CTs, and designing those 80 cases by means of AI osteotomy software designing (group A) and manually designing (group B), respectively; second step: comparing several indexes of group A and those of group B, including the efficiency index (time from input original CT data to osteotomy presurgical plan output), the safety index (the minimum distance from the osteotomy plane to the mandibular canal), the symmetry indexes (bilateral difference of mandibular angle, mandibular ramus height and mandibular valgus angle) and aesthetic indexes (width ratio between middle and lower faces (M/L), mandibular angle and mandibular valgus angle). RESULTS: The efficiency index: the design time of group A is 1.768 ± 0.768 min and that of group B is 26.108 ± 1.137 min, with P = 0.000; the safety index: The minimum distances from the osteotomy plane to the mandibular canal are 3.908 ± 0.361mm and 3.651 ± 0.437mm, p = 0.117 in groups A and B, respectively; The symmetry indexes: Bilateral differences of mandibular angle are 1.824 ± 1.834° and 1.567 ± 1.059° in groups A and B, respectively, with P = 0.278; bilateral differences of mandibular ramus height are 2.083 ± 1.263 and 2.965 ± 1.433, respectively, with P = 0.119 in groups A and B; Aesthetic indexes: M/L in groups A and B is 1.364 ± 0.074 and 1.371 ± 0.067, respectively, with P = 0.793; mandibular angles in groups A and B are 127.724 ± 5.800° and 127.242 ± 5.545°, respectively, with P = 0.681; Valgus angles in groups A and B are 11.474 ± 5.380 and 9.743 ± 4.620, respectively, with P = 0.273. CONCLUSIONS: With high efficiency, as well as safety, symmetry and aesthetics equivalent to those of a manual design, the AI osteotomy software designing can be used as an alternative method for manual osteotomy designing. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.

Assessment of Robot-Assisted Mandibular Contouring Surgery in Comparison With Traditional Surgery: A Prospective, Single-Center, Randomized Controlled Trial.

BACKGROUND: Few clinical studies on robot-assisted surgery (RAS) for mandibular contouring have been reported. OBJECTIVES: The aim of this study was to follow the long-term effectiveness and safety of RAS for craniofacial bone surgery. METHODS: This small-sample, early-phase, prospective, randomized controlled study included patients diagnosed with mandibular deformity requiring mandibular contouring surgery. Patients of both genders aged 18 to 30 years without complicated craniofacial repair defects were enrolled and randomly assigned in a 1:1 ratio by a permuted-block randomized assignments list generated by the study statistician. The primary outcomes were the positioning accuracy and accuracy of the osteotomy plane angle 1 week after surgery. Surgical auxiliary measurement index, patient satisfaction scale, surgical pain scale, perioperative period, and complications at 1 week, 1 month, and 6 months after surgery were also analyzed. RESULTS: One patient was lost to follow-up, resulting in a total of 14 patients in the traditional surgery group and 15 in the robot-assisted group (mean [standard deviation] age, 22.65 [3.60] years). Among the primary outcomes, there was a significant difference in the positioning accuracy (2.91 mm vs 1.65 mm; P < 0.01) and angle accuracy (13.26º vs 4.85º; P < 0.01) between the 2 groups. Secondary outcomes did not significantly differ. CONCLUSIONS: Compared to traditional surgery, robot-assisted mandibular contouring surgery showed improved precision in bone shaving, as well as higher safety.