Polydopamine-Induced Multilevel Engineering of Regenerated Silk Fibroin Fiber for Photothermal Conversion.

Solid photothermal materials with favorable biocompatibility and modifiable mechanical properties demonstrate obvious superiority and growing demand. In this work, polydopamine (PDA) induced functionalization of regenerated silk fibroin (RSF) fibers has satisfactory photothermal conversion ability and flexibility. Based on multilevel engineering, RSF solution containing PDA nanoparticles is wet spun to PDA-incorporating RSF (PDA@RSF) fibers, and then the fibers are coated with PDA via oxidative self-polymerization of dopamine to form PDA@RSF-PDA (PRP) fibers. During the wet spinning process, PDA is to adjust the mechanical properties of RSF by affecting its hierarchical structure. Meanwhile, coated PDA gives the PRP fibers extensive absorption of near-infrared light and sunlight, which is further fabricated into PRP fibrous membranes. The temperature of PRP fibrous membranes can be adjusted and increases to about 50 °C within 360 s under 808 nm laser irradiation with a power density of 0.6 W cm-2 , and PRP fibrous membranes exhibit effective photothermal cytotoxicity both in vitro and in vivo. Under the simulated sunlight, the temperature of PRP fiber increases to more than 200 °C from room temperature and the material can generate 4.5 V voltage when assembled with a differential thermal battery, which means that the material also has the potential for flexible wearable electronic devices.

From Molecular Reconstruction of Mesoscopic Functional Conductive Silk Fibrous Materials to Remote Respiration Monitoring.

Turning insulating silk fibroin materials into conductive ones turns out to be the essential step toward achieving active silk flexible electronics. This work aims to acquire electrically conductive biocompatible fibers of regenerated Bombyx mori silk fibroin (SF) materials based on carbon nanotubes (CNTs) templated nucleation reconstruction of silk fibroin networks. The electronical conductivity of the reconstructed mesoscopic functional fibers can be tuned by the density of the incorporated CNTs. It follows that the hybrid fibers experience an abrupt increase in conductivity when exceeding the percolation threshold of CNTs >35 wt%, which leads to the highest conductivity of 638.9 S m-1 among organic-carbon-based hybrid fibers, and 8 times higher than the best available materials of the similar types. In addition, the silk-CNT mesoscopic hybrid materials achieve some new functionalities, i.e., humidity-responsive conductivity, which is attributed to the coupling of the humidity inducing cyclic contraction of SFs and the conductivity of CNTs. The silk-CNT materials, as a type of biocompatible electronic functional fibrous material for pressure and electric response humidity sensing, are further fabricated into a smart facial mask to implement respiration condition monitoring for remote diagnosis and medication.

Engineering of fluorescent emission of silk fibroin composite materials by material assembly.

This novel materials assembly technology endows the designated materials with additional/enhanced performance by fixing "functional components" into the materials. Such functional components are molecularly recognized and accommodated by the designated materials. In this regard, two-photon fluorescence (TPF) organic molecules and CdTe quantum dots (QDs) are adopted as functional components to functionalize silk fibers and films. TPF organic molecules, such as, 2,7-bis[2-(4-nitrophenyl) ethenyl]-9,9-dibutylfluorene (NM), exhibit TPF emission quenching because of the molecular stacking that leads to aggregation in the solid form. The specific recognition between -NO2 in the annealed fluorescent molecules and the -NH groups in the silk fibroin molecules decouples the aggregated molecules. This gives rise to a significant increase in the TPF quantum yields of the silk fibers. Similarly, as another type of functional components, CdTe quantum dots (QDs) with different sizes were also adopted in the silk functionalization method. Compared to QDs in solution the fluorescence properties of functionalized silk materials display a long stability at room temperature. As the functional materials are well dispersed at high quantum yields in the biocompatible silk a TPF microscope can be used to pursue 3D high-resolution imaging in real time of the TPF-silk scaffold.

A Matrix-Metalloproteinase-Responsive Hydrogel System for Modulating the Immune Microenvironment in Myocardial Infarction.

Injectable hydrogels carrying therapeutic factors to modulate the infarct immune microenvironment show great potential in the treatment of myocardial infarction (MI). However, conventional injectable hydrogels release therapeutic factors in an uncontrolled manner, which leads to poor treatment efficacy and acute side effects on normal tissues. In this work, a matrix metalloproteinase (MMP)2/9-responsive hydrogel system (MPGC4) is developed, considering the characteristics of the post-MI microenvironment. MPGC4 consists of tetra-poly(ethylene glycol) (PEG) hydrogels and a composite gene nanocarrier (CTL4) that is composed of carbon dots (CDots) coupled with interleukin-4 plasmid DNA via electrostatic interactions. MPGC4 can be automatically triggered to release CTL4 on demand after MI to regulate the infarct immune microenvironment. In addition, due to the photoluminescence properties of CDots, a large amount of viscoelastic MPGC4 is found to be retained in situ after injection into the infarct region without leakage. The in vitro results demonstrate that CTL4 promotes proinflammatory M1 macrophage polarization to the anti-inflammatory M2 subtype and contributes to cardiomyocyte survival through macrophage transition. In a rat model of MI, MPGC4 clears MMPs and precisely targets CTL4 to the infarcted region. In particular, MPGC4 improves cardiac function by modulating macrophage transition to reduce early inflammatory responses and proangiogenic activity.

Biomimetic Salinity Power Generation Based on Silk Fibroin Ion-Exchange Membranes.

Powering implanted medical devices (IMDs) is a long-term challenge since their use in biological environments requires a long-term and stable supply of power and a biocompatible and biodegradable battery system. Here, silk fibroin-based ion-exchange membranes are developed using bionics principles for reverse electrodialysis devices (REDs). Silk fibroin nanofibril (SNF) membranes are negatively and positively modified, resulting in strong cation and anion selectivity that regulates ion diffusion to generate electric power. These oppositely charged SNF membranes are assembled with Ag/AgCl electrodes into a multicompartment RED. By filling them with 10 and 0.001 mM NaCl solutions, a maximum output power density of 0.59 mW/m2 at an external loading resistance of 66 kΩ is obtained. In addition, 10 pairs of SNF membranes produce a considerable voltage of 1.58 V. This work is a proof of concept that key components of battery systems can be fabricated with protein materials. Combined with the emergence of water-based battery technologies, the findings in this study provide insights for the construction of tissue-integrated batteries for the next generation of IMDs.

Subcutaneous Energy/Signal Transmission Based on Silk Fibroin Up-Conversion Photonic Amplification.

Transmission of energy and signals through human skin is critically important for implantable devices. Because near-infrared (NIR) light can easily penetrate through human skin/tissue, in this study we report on silk fibroin (SF) up-conversion photonic amplifiers (SFUCPAs) integrated into optoelectronic devices, which provide a practical approach for subcutaneous charging and communication via NIR lasers. SFUCPAs achieve a 4 times higher fluorescence than the control, which gives rise to a 47.3 time increase in subcutaneous NIR energy conversion efficiency of a single fibrous dye-sensitized solar cell compared with the control. Moreover, the hybrid printed electrodes exhibited reversible switching to NIR exposure with a response time of ∼1.06/1.63 s for a 3 s ON/OFF switch. Owing to the flexible, biocompatible, and cost-efficient design NIR-driven optoelectronic performance, the SFUCPAs are promising for use in applications of subcutaneous medical electronics for charging, storing information, and controlling implanted devices.