A modified Prussian blue biosensor with improved stability based on the use of self-assembled monolayers and polydopamine for quantitative L-glutamate detection.

A miniature L-glutamate (L-Glu) biosensor is described based on Prussian blue (PB) modification with improved stability by using self-assembled monolayers (SAMs) technology and polydopamine (PDA). A gold microelectrode (AuME) was immersed in NH2(CH2)6SH-ethanol solution, forming well-defined SAMs via thiol-gold bonding chemistry which increased the number of deposited Prussian blue nanoparticles (PBNPs) and confined them tightly on the AuME surface. Then, dopamine solution was dropped onto the PBNPs surface and self-polymerized into PDA to protect the PB structure from destruction. The PDA/PB/SAMs/AuME showed improved stability through CV measurements in comparison with PB/AuME, PB/SAMs/AuME, and PDA/PB/AuME. The constructed biosensor achieved a high sensitivity of 70.683 nA µM-1 cm-2 in the concentration range 1-476 µM L-Glu with a low LOD of 0.329 µM and performed well in terms of selectivity, reproducibility, and stability. In addition, the developed biosensor was successfully applied to the determination of L-Glu in tomato juice, and the results were in good agreement with that of high-performance liquid chromatography (HPLC). Due to its excellent sensitivity, improved stability, and miniature volume, the developed biosensor not only has a promising potential for application in food sample analysis but also provides a good candidate for monitoring L-Glu level in food production.

Quantitative analysis of the color in six CAD-CAM dental materials of varied thickness and surface roughness: An in vitro study.

STATEMENT OF PROBLEM: Computer-aided design and computer-aided manufacturing (CAD-CAM) monochromatic restorative materials are gaining popularity because of their convenience and efficiency. However, studies that quantitatively analyzed color change associated with thickness and surface roughness are sparse. PURPOSE: The purpose of this in vitro study was to quantitatively evaluate the color of 6 CAD-CAM monochromatic materials of different thickness and surface roughness using the CIELab color system. MATERIAL AND METHODS: A total of 150 12×12-mm square specimens of 6 different CAD-CAM monochromatic materials (VITA Enamic HT [VE], IPS e.max CAD HT [LS], LAVA Ultimate HT [LU], Telio CAD HT [TE], VITA Suprinity HT [VS], and Celtra Duo HT [CD]) in shade A2 and 5 different thicknesses (from 0.5 mm to 2.5 mm, with 0.5-mm increments) were fabricated (n=5). After 3 different surface treatments (polished, roughened by SiC P800-grit, and P300-grit), CIELab color parameters (L*, a* and b*) were measured using a spectrophotometer (VITA Easyshade V), and surface roughness was measured with a profilometer (VK-X200). Color variation was quantified by ΔE00 and 50:50% acceptability and perceptibly thresholds. Data analyses were performed using MANOVA, 2-way ANOVA, post hoc Tukey-Kramer test, and the 1-sample t test (α=.05). RESULTS: The L*, a*, and b* of the monochromatic specimens were significantly influenced by material type, thickness, and surface roughness (P<.001). An overall increase in the L* (from 61.90 to 82.2), a* (from -4.22 to 1.16), and b* (from 5.48 to 43.22) of the specimens was observed with increased thickness. The roughened specimens exhibited lower L* and higher a* and b* than the polished ones (P<.001). The use of P300-grit for roughening resulted in greater ΔE00 compared with P800-grit (P<.001). As thickness decreased or surface roughness increased, the ΔE00 increased and exceeded the acceptability and perceptibly thresholds for color difference. CONCLUSIONS: Material type, thickness, and surface roughness were major factors affecting the color of CAD-CAM monochromatic materials. Variations in thickness of 0.5 mm or more, as well as roughening treatments, may lead to clinically unacceptable color changes.

Digital registration versus cone-beam computed tomography for evaluating implant position: a prospective cohort study.

BACKGROUND: Postoperative cone-beam computed tomography (CBCT) examination is considered a reliable method for clinicians to assess the positions of implants. Nevertheless, CBCT has drawbacks involving radiation exposure and high costs. Moreover, the image quality can be affected by artifacts. Recently, some literature has mentioned a digital registration method (DRM) as an alternative to CBCT for evaluating implant positions. The aim of this clinical study was to verify the accuracy of the DRM compared to CBCT scans in postoperative implant positioning. MATERIALS AND METHODS: A total of 36 patients who received anterior maxillary implants were included in this clinical study, involving a total of 48 implants. The study included 24 patients in the single implant group and 12 patients in the dual implant group. The postoperative three-dimensional (3D) positions of implants were obtained using both CBCT and DRM. The DRM included three main steps. Firstly, the postoperative 3D data of the dentition and intraoral scan body (ISB) was obtained through the intraoral scan (IOS). Secondly, a virtual model named registration unit which comprised an implant replica and a matching ISB was created with the help of a lab scanner and reverse engineering software. Thirdly, by superimposing the registration unit and IOS data, the postoperative position of the implant was determined. The accuracy of DRM was evaluated by calculating the Root Mean Square (RMS) values after superimposing the implant positions obtained from DRM with those from postoperative CBCT. The accuracy of DRM was compared between the single implant group and the dual implant group using independent sample t-tests. The superimposition deviations of CBCT and IOS were also evaluated. RESULTS: The overall mean RMS was 0.29 ± 0.05 mm. The mean RMS was 0.30 ± 0.03 mm in the single implant group and 0.29 ± 0.06 mm in the dual implant group, with no significant difference (p = 0.27). The overall registration accuracy of the IOS and CBCT data ranged from 0.14 ± 0.05 mm to 0.21 ± 0.08 mm. CONCLUSION: In comparison with the 3D implant positions obtained by CBCT, the implant positions located by the DRM showed clinically acceptable deviation ranges. This method can be used in single and dual implant treatments to assess the implant positions.

Crown adjustment and chairside efficiency of single-unit restorations fabricated from immediate and staged impressions using a digital workflow for posterior implants.

PURPOSE: This is a clinical study to compare immediate and staged impression methods in a complete digital workflow for single-unit implants in the posterior area. MATERIALS AND METHODS: Sixty patients requiring single-unit implant crowns were enrolled. Forty patients were assigned to the test group, immediate digital impression after implant surgery with crown delivery 4 months later. The remaining 20 patients were assigned to the control group, staged digital impressions 4 months after implant surgery, and crown delivery 1 month later. Both workflows involved free-model CAD-CAM crown fabrications. The crowns were scanned before and after clinical adjustment using an intraoral scanner (TRIOS Color; 3Shape). Two 3D digital models were trimmed and superimposed to evaluate the dimensional changes using Geomagic Control software. Chairside times for the entire workflow were recorded. Kruskal-Wallis was performed to compare crown adjustments between two groups, while One-way ANOVA was used to compare chairside time durations between the test and control groups. RESULTS: All crowns were delivered without refabrication. The average maximum occlusion adjustment of crowns was -353.2 ± 207.1 µm in the test group and -212.7 ± 150.5 µm in the control group (p = 0.02). The average area of occlusal adjustment, measured as an area of deviation larger than 100 µm, was 14.8 ± 15.3 and 8.4 ± 8.1 mm2 in the test and control groups, respectively (p = 0.056). There were no significant differences in the mesial and distal contact adjustment amounts, or the maximum deviations of the proximal area, between the two groups. The mean chair-side time was 50.25 ± 13.48 and 51.20 ± 5.34 min in the test and control groups, respectively (p = 0.763). CONCLUSIONS: The immediate impression method in the digital workflow for single-unit implants required more occlusal adjustments of crowns but showed similar chairside times compared to the staged impression method.

Screw-retained ceramic-veneered/monolithic zirconia partial implant-supported fixed dental prostheses: A 5 to 10-year retrospective study on survival and complications.

PURPOSE: To assess the clinical performance of screw-retained, ceramic-veneered, monolithic zirconia partial implant-supported fixed dental prostheses (ISFDP) over 5-10 years and to evaluate implant- and prosthesis-related factors influencing treatment failure and complications. MATERIALS AND METHODS: Partially edentulous patients treated with screw-retained all-ceramic ISFDPs with 2-4 prosthetic units with a documented follow-up of ≥5 years after implant loading were included in this retrospective study. The outcomes analyzed included implant/prosthesis failure and biological/technical complications. Possible risk factors were identified using the mixed effects Cox regression analysis. RESULTS: A screened sample of 171 participants with 208 prostheses (95% of the restorations were splinted crowns without a pontic) supported by 451 dental implants were enrolled in this study. The mean follow-up duration after prosthesis delivery was 82.4 ±17.2 months. By the end of the follow-up period, 431 (95.57%) of the 451 implants remained functional at the implant level. At the prosthesis level, 185 (88.94%) of the 208 partial ISFDPs remained functional. Biological complications were observed in 67 implants (14.86%), and technical complications were observed in 62 ISFDPs (29.81%). Analysis revealed only emergence profiles (over-contoured) as a significant risk factor for implant failure (P<0.001) and biological complications (P<0.001). Full-coverage ceramic-veneered zirconia prostheses had a significantly greater chance of chipping (P<0.001) compared with buccal-ceramic-veneered or monolithic zirconia prostheses. CONCLUSIONS: Screw-retained ceramic-veneered, monolithic partial ISFDPs have a favorable long-term survival rate. Over-contoured emergence profile is a significant risk factor associated with implant failure and biological complications. Buccal-ceramic-veneered and monolithic zirconia partial ISFDPs lower the initial prevalence of chipping compared with a full-coverage veneered design.

Impact of vertical alveoloplasty on changes in keratinized mucosa width following full-arch immediate implant placement and rehabilitations: A prospective case series.

PURPOSE: This prospective case series aimed to investigate the effect of vertical alveoloplasty on the changes in keratinized mucosa width (KMW) following full-arch immediate implant placement and rehabilitation. MATERIALS AND METHODS: A total of 17 potential edentulous patients were enrolled and received implant placement and full-arch implant-supported immediate rehabilitations. The main outcome was to analyze the effect of vertical alveoloplasty on the changes in KMW. The amount of vertical alveoloplasty during implant surgery as well as the changes in KMW at buccal aspects from the day of surgery to 6 months post-surgery were recorded on the implant-level using a periodontal probe. The secondary outcome was to analyze the other possible factors that affected the changes in KMW. The included factors were the initial KMW, the distribution of implants in the maxilla and mandible, the distribution of implants in the anterior and posterior regions, the distribution of implants in extraction sockets and healed ridges, and gender. Mann-Whitney non-parametric tests and multiple linear regression adjusted by generalized estimating equations (GEE) were used to statistically analyze the data. RESULTS: A total of 121 implant positions were analyzed. The KMW was 4.1± 2.0 mm on the day of the surgery and 4.1± 1.7 mm 6 months post-surgery. The mean changes in KMW following 6 months were -0.1± 1.6 mm (p = 0.824). From the results of GEE, the vertical amount of alveoloplasty had no significant effect on changes in KMW. Both initial KMW and the distribution of implants in the anterior and posterior regions had significant impacts on the changes in KMW (p < 0.0001). CONCLUSION: The amount of vertical alveoloplasty during implant surgery has no significant impact on the KMW. The KMW remained stable from baseline to 6 months after alveoloplasty, implant placement, and immediate rehabilitations in potential edentulous arches. The initial KMW and the distribution of implants in the anterior and posterior regions were the possible factors affecting changes in KMW.

Clinical evaluation and quantitative occlusal change analysis of posterior implant-supported all-ceramic crowns: A 3-year randomized controlled clinical trial.

OBJECTIVES: To compare the survival and complication rates of posterior screw-retained monolithic lithium disilicate (LS2 )/veneered zirconia (ZrO2 ) single implant crowns (SICs), as well as analyze the occlusal changes observed during a 3-year follow-up period. MATERIALS AND METHODS: Thirty-three patients were included and randomly divided into two groups. The test group consisted of 17 patients who received monolithic-LS2 -SIC, while the control group consisted of 16 patients who received veneered-ZrO2 -SIC. Implant/prosthesis survival rates, technical complications, peri-implant soft tissue conditions, and quantitative occlusal changes of SIC (obtained by the intra-oral scanner and analyzed in reverse software Geomagic Control 2015) were assessed at 1- and 3-year follow-ups. Bone loss and Functional Implant Prosthodontic Score (FIPS) were evaluated at a 3-year follow-up. RESULTS: After a 3-year follow-up period, one patient dropped out of the follow-up. No implant loss was observed. One crown was fractured, resulting in prosthesis survival rates of 93.75% for the monolithic group and 100% for the veneered group. A technical complication rate of 25% (4/16) was observed in the veneered group (p = .333). No significant differences in the marginal bone loss were observed at the 3-year follow-up (0.00 (-0.22, 0.17) mm versus 0.00 (-0.12, 0.12) mm, p = .956). The total FIPS scores for the test group were 9.0 (9.0, 9.0), while the control group received scores of 9.0 (8.0, 10.0) (p = .953). The changes in mean occlusal clearance were 0.022 ± 0.083 mm for the test and 0.034 ± 0.077 mm for the control group (at 3 years, p = .497). The changes in occlusal contact area were 1.075 ± 2.575 mm2 for the test and 1.676 ± 2.551 mm2 for the control group (at 3 years, p = .873). CONCLUSION: After a 3-year follow-up, screw-retained monolithic LS2 and veneered ZrO2 SIC demonstrated similar survival rates. The occlusal performance of implant prostheses needs to be closely examined during follow-up, and appropriate occlusal adjustments need to be considered.

Plaque accumulation on the fitting surface of full-arch implant-supported fixed prostheses with contact or noncontact pontics: A split mouth randomized controlled trial.

OBJECTIVE: To explore the differences in plaque accumulation on the fitting surface of full-arch implant-supported fixed prostheses with contact or noncontact pontics. MATERIALS AND METHODS: Nineteen patients (20 prostheses, 7 in the maxilla, and 13 in the mandible) intending to undergo full-arch implant-supported immediate function prostheses were recruited. During immediate restoration and using the midline as the boundary, one side was restored as a pontic and mucosa noncontact type (the test group), and the opposite side was restored as a pontic and mucosa contact type (the control group). In a follow-up 6 months after the surgery, the cleanliness of the fitting surface of the immediate prosthesis was evaluated by plaque staining and debris index determination. Patient satisfaction was investigated by questionnaire. RESULTS: Twenty prostheses from 19 patients included in the randomized controlled trial were followed up. Among the 20 prostheses, the percentage of area covered with plaque was significantly lower in the test group compared with that in the control group (31.5 ± 15.8% vs. 43.7 ± 15.3%; p < 0.001). The debris index in the test group was lower than that in the control group, although the difference was not statistically significant (2.77 ± 0.73 vs. 3.15 ± 0.90; p > 0.05). In the patient satisfaction survey, most of the patients were satisfied with most aspects of the prostheses, however, nearly half of the patients were not satisfied with the cleaning. CONCLUSIONS: The pontic and mucosa noncontact prosthetic design reduces plaque accumulation on the fitting surface, which is beneficial for maintaining oral cleanliness. However, the majority of study samples were mandible and conclusions may not be fully applicable to maxilla. TRIAL REGISTRATION: www.chictr.org.cn (ChiCTR1900028576). CLINICAL SIGNIFICANCE: The noncontact design in full-arch implant-supported fixed prostheses may be an effective measure of improving oral hygiene promotion. There is need for more research that can further improve oral hygiene of patients with full-arch implant-supported prostheses.

Effects of thickness and polishing treatment on the translucency and opalescence of six dental CAD-CAM monolithic restorative materials: an in vitro study.

BACKGROUND: Computer-aided design and computer-aided manufacturing (CAD-CAM) materials for prosthetic is gaining popularity in dentistry. However, limited information exists regarding the impact of thickness and roughening treatment on the optical properties of contemporary CAD-CAM restorative materials. This study aimed to quantitatively evaluate the translucency and opalescence of six dental CAD-CAM materials in response to different thicknesses and roughening treatments. METHODS: Six dental CAD-CAM materials, lithium disilicate glass-ceramic (IPS e.max CAD, LS), polymer-infiltrated ceramic (VITA Enamic, VE), resin-nano ceramic glass-ceramic (LAVA Ultimate, LU), polymethyl methacrylate (Telio CAD, TE), and two zirconia reinforced lithium silicate (VITA Suprinity, VS, and Celtra Duo, CD), in shade A2 were prepared as 12 × 12mm2 specimens of four thicknesses (0.5mm, 1.0mm, 1.5mm, and 2.0mm) (N = 240, n = 10). After three different treatments (polished, roughened by SiC P800-grit, and SiC P300-grit), the translucency parameter (TP00) and opalescence parameter (OP) were measured with a spectrophotometer (VITA Easyshade V). The surface roughness was analyzed with a shape measurement laser microscope. The data were analyzed using a MANOVA, post hoc Tukey-Kramer test, the t test, and regression analysis (α = .05). RESULTS: The TP00 and OP were significantly influenced by material type, thickness and roughening treatment (P < .05). TP00 showed a continues decline with increasing thicknesses, while the variations of OP were material-dependent. TP00 ranged from 37.80 (LS in 0.5mm) to 5.66 (VS in 2.0mm), and OP ranged from 5.66 (LU in 0.5mm) to 9.55 (VS in 0.5mm). The variations in TP00 of all materials between adjacent thicknesses ranged from 2.10 to 15.29, exceeding the acceptable translucency threshold except for LU. Quadratic and logarithmic regression curves exhibited the best fit for TP00 among the materials. Compared to polished specimens, rougher specimens exhibited lower TP00 and higher OP in all materials except for LS (P < 0.05). Roughening with P300-grit decreased TP00 and OP by an average of 2.59 and 0.43 for 0.5mm specimens, and 1.26 and 0.25 for 2.0mm specimens, respectively. CONCLUSIONS: Variations in translucency caused by thickness and roughening treatment were perceptible and may be clinically unacceptable. Careful consideration should be given to the selection of CAD-CAM materials based on their distinct optical properties.

Accuracy assessment of implant placement with versus without a CAD/CAM surgical guide by novices versus specialists via the digital registration method: an in vitro randomized crossover study.

BACKGROUND: Many studies demonstrated that surgical guides might reduce discrepancies compared with freehand implant placement. This randomized crossover study aimed to assess the effects of approaches, practitioners' experience and learning sequences on the accuracy of single tooth implantation via digital registration method. No similar study was found. METHODS: This in vitro randomized crossover study enrolled 60 novice students (Group S) and 10 experienced instructors (Group I). Sixty students were randomly and evenly assigned to two groups (Group SA and SB). In Group SA, 30 students first performed single molar implant on a simulation model freehand (Group SAFH), and then with a CAD/CAM surgical guide (Group SASG). In Group SB, another 30 students first performed guided (Group SBSG) and then freehand (Group SBFH). Ten instructors were also divided into Group IAFH/IASG (n = 5) and IBSG/IBFH (n = 5) following the same rules. The accuracy of implant placement was assessed by the coronal and apical distance (mm) and angular (°) deviations using the digital registration method. T tests and nonparametric tests were used to compare the results among different groups of approaches, experience and sequences. RESULTS: For students, the coronal and apical distance and the angular deviations were significantly lower in surgical guide group than freehand group in total and in learning freehand first subgroup, but for learning surgical guide first subgroup the apical distance deviation showed no significant difference between two approaches. For students, the angular deviation of freehand group was significantly lower in learning surgical guide first group than learning freehand first group. For instructors, the coronal and apical distance and angular deviations showed no significant difference between two approaches and two sequences. For freehand approach, the coronal and apical distance and the angular deviations were significantly higher in student group than instructor group, while not significantly different between two groups for surgical guide approach. CONCLUSIONS: For novices, using a surgical guide for the first implant placement may reduce the potential deviations compared with freehand surgery, and may reach a comparable accuracy with that of specialists. For simple single molar implantation, the surgical guide may not be significantly helpful for experienced specialists.

Finite element analysis of stress in oral mucosa and titanium mesh interface.

BACKGROUND: The stiffness of titanium mesh is a double-blade sword to repair larger alveolar ridges defect with excellent space maintenance ability, while invade the surrounding soft tissue and lead to higher mesh exposure rates. Understanding the mechanical of oral mucosa/titanium mesh/bone interface is clinically meaningful. In this study, the above relationship was analyzed by finite elements and verified by setting different keratinized tissue width in oral mucosa. METHODS: Two three-dimensional finite element models were constructed with 5 mm keratinized tissue in labial mucosa (KM cases) and 0 mm keratinized tissue in labial mucosa (LM cases). Each model was composed of titanium mesh, titanium screws, graft materials, bone, teeth and oral mucosa. After that, a vertical (30 N) loadings were applied from both alveolar ridges direction and labial mucosa direction to stimulate the force from masticatory system. The displacements and von Mises stress of each element at the interfaces were analyzed. RESULTS: Little displacements were found for titanium mesh, titanium screws, graft materials, bone and teeth in both LM and KM cases under different loading conditions. The maximum von Mises stress was found around the lingual titanium screw insertion place for those elements in all cases. The keratinized tissue decreased the displacement of oral mucosa, decreased the maximum von Mises stress generated by an alveolar ridges direction load, while increased those stress from labial mucosa direction load. Only the von Mises stress of the KM cases was all lower than the tensile strength of the oral mucosa. CONCLUSION: The mucosa was vulnerable under the increasing stress generated by the force from masticatory system. The adequate buccal keratinized mucosa width are critical factors in reducing the stress beyond the titanium mesh, which might reduce the titanium exposure rate.

Accuracy of impressions for multiple implants: A comparative study of digital and conventional techniques.

STATEMENT OF PROBLEM: Intraoral scanning has benefits over conventional impression making, but whether scanning is sufficiently accurate for multiple implants is unclear. PURPOSE: The purpose of this in vitro study was to compare the trueness of digital scans acquired by using intraoral scanners from a small range to a complete arch with the conventional impression technique and to determine the influence of 2 different evaluation methods (best-fit algorithm versus absolute linear deviation) on the outcomes of accuracy assessment. MATERIAL AND METHODS: A mandibular model with 8 implants (A-H) around an edentulous arch was used as the master model. Open-format standard tessellation language (STL) data sets (1 reference file from a highly accurate dental laboratory scanner, 10 files from an intraoral scanner, and 10 files from digitized conventional impressions at room temperature) were imported to a metrology software program, and 5 groups of scanning ranges (AB, FGH, CDEF, BCDEFG, and ABCDEFGH) were identified simulating different clinical situations. Two evaluation methods-root mean square values calculated from the best-fit algorithm and average value of linear discrepancies from absolute linear deviation-were used to describe the trueness values. The impacts of different scanning or impression methods, ranges, and evaluation methods were tested by using a 3-way ANOVA. The effect of the scanning range on accuracy was further identified with 1-way ANOVA. The paired-sample t test was used to determine the differences of trueness values between the 2 methods in different groups. RESULTS: The trueness values of the implant impressions were significantly affected by different scanning or impression methods (P<.001), evaluation methods (P<.001), and scanning ranges (P<.001) as independent variables. With use of the best-fit algorithm, deviations from the digital scans were significantly greater than those from the conventional impressions in cross-arch situations (groups CDEF, BCDEFG, and ABCDEFGH). With use of the absolute linear deviation method, statistically significant lower accuracy was found when larger areas were encountered (groups BCDEFG and ABCDEFGH). Use of the absolute linear deviation method resulted in a higher mean score of inaccuracy than that from the best-fit algorithm method in most situations. CONCLUSIONS: Scanning or impression methods, ranges, and evaluation methods affected the dimensional accuracy (trueness) of scans or impressions with multiple implants. Digital scans had worse trueness values compared with those made with the conventional splinting open-tray technique when cross-arch implant impressions were acquired.

Quantitative analysis of color accuracy and bias in 4 dental CAD-CAM monolithic restorative materials with different thicknesses: An in vitro study.

STATEMENT OF PROBLEM: Computer-aided design and computer-aided manufacturing (CAD-CAM) monolithic restorative materials have become a popular option because of advantages such as convenience and efficiency. However, studies that quantitatively analyzed their color accuracy and bias are lacking. PURPOSE: The purpose of this in vitro study was to evaluate the color accuracy and bias of 4 CAD-CAM monolithic restorative materials with different thicknesses by using the CIELab color space. MATERIAL AND METHODS: Four types of dental CAD-CAM monolithic restorative materials in shade A2, lithium disilicate glass-ceramic (IPS e.max CAD), infiltrated ceramic (VITA Enamic), resin-nano ceramic (LAVA Ultimate), and polymethyl methacrylate (Telio CAD), were prepared as 12×12-mm specimens of 10 different thicknesses (from 0.5 to 5.0 mm) (N=200, n=5). After polishing with SiC P1500-grit, CIELab color coordinate parameters of the specimens were measured with a spectrophotometer (VITA Easyshade V). The color accuracy and bias were described by ΔE00, ΔL∗, Δa∗, and Δb∗ in the CIELab color space, and the data were analyzed by using a 2-way ANOVA, post hoc Tukey-Kramer test, and the t test (α=.05). RESULTS: The ΔE00, ΔL∗, Δa∗, and Δb∗ were significantly influenced by material type and thickness (P<.001). Specimens at a thickness of 0.5 mm represented the maximum ΔE00. The minimum ΔE00 was observed at a thickness of 2.0 mm for LAVA Ultimate, 1.5 mm for VITA Enamic and Telio CAD, and 4.0 mm for IPS e.max CAD. The ΔE00 of all specimens significantly exceeded the 50:50% acceptability threshold (1.8 unit) (P<.001). LU exhibited higher ΔE00, Δa∗, and Δb∗ than the other 3 materials in all thickness expect for 0.5 mm. For color bias, the ΔE00 was more influenced by Δb∗ and ΔL∗ than Δa∗. CONCLUSIONS: The color accuracy and bias were significantly affected by material type and thickness. The color inaccuracy of the tested materials was statistically significant and clinically perceptible. Improved clinical outcomes may be expected from the 1.5-mm- to 2.0-mm-thick restorations.

Crown Accuracy and Time Efficiency of Cement-Retained Implant-Supported Restorations in a Complete Digital Workflow: A Randomized Control Trial.

PURPOSE: This is a clinical study to compare complete digital workflows generated using intraoral scanning and the split-file technique with a conventional workflow for cement-retained implant-supported restorations. MATERIALS AND METHODS: Forty patients requiring posterior single-unit implant restorations were included. Twenty patients were randomly assigned to the complete digital workflow group, involving intraoral scanning and manufacture of cement-retained crowns using the split-file technique (test group). The remaining 20 patients were assigned to the hybrid workflow group (control group), involving conventional impressions and CAD-CAM fabricated crowns based on stone casts. Scanning of the crowns was performed before and after clinical adjustment using an intraoral scanner (TRIOS Color; 3Shape). Two 3D digital models were trimmed and superimposed to evaluate changes in dimensions using Geomagic Control 2014 software. Chair-side and laboratory times for the entire workflow were recorded. Independent-sample t tests were used for the statistical analysis. RESULTS: All crowns were inserted without refabrication. The average maximum occlusal adjustment of the crowns, measured as maximum deviation of occlusal area in superimposed pre and post scans, was -212.7 ± 150.5 and -330.7 ± 192.5 µm in the test and control groups, respectively (p = 0.037). The average area of occlusal adjustment, measured as area of deviation larger than 100 µm, was 8.4 ± 8.1 and 17.1 ± 12.3 mm2 in the test and control groups, respectively (p = 0.012). The mesial and distal contact adjustment amounts, maximum deviations of proximal area, were -33.0 ± 96.2 and -48.6 ± 70.5 µm in the test group, and -3.7 ± 66.7 µm and -11.4 ± 106.7 µm in the control group, respectively. The mean chair-side time was 20.20 ± 3.00 and 26.65 ± 4.53 minutes in the test and control groups, respectively (p < 0.001). The mean laboratory time was 43.70 ± 5.56 and 84.55 ± 5.81 minutes in the test and control groups, respectively (p < 0.001). CONCLUSIONS: Single-unit cement-retained crowns with complete digital workflows required fewer crown adjustments and had shorter clinical and laboratory times compared to conventional impressions and hybrid workflows. Digital impressions and the split-file technique provided customized abutments and cement-retained crowns, thus broadening the indications for digital workflows for implants.

A modified implant abutment holder fabricated with fused deposition modeling to improve the transfer process for implant-supported restorations.

Ingestion or aspiration of an implant abutment can occur in patients during the process of abutment transfer for implant-supported restorations, especially in the posterior region. A technique of fabricating an abutment holder is described to prevent ingestion or aspiration by computer-aided design (CAD) and fused deposition modeling (FDM). The modified abutment holder has a serrated handle for a firm grip and a barrel-shaped fixed portion that firmly secures the abutment. The modified holder is more secure than the conventional hexagon screwdriver. Furthermore, abutment holders can be easily manufactured by using 3D printers and repeatedly used for multiple implants restoration without substitution.

Morphometry and displacement analysis of the upper lips following maxillary full-arch implant-supported fixed prostheses: a 3D morphometric study.

BACKGROUND: With the emergence of three-dimensional (3D) integration technology, analysis of soft tissue displacement and morphological changes after maxillary full-arch implant-supported fixed prostheses can be performed. The aim of this study was to verify the feasibility of the 3D integration method for constructing the relative position of the prostheses and facial soft tissue, evaluate the displacement and morphological variation of the upper lips after maxillary full-arch implant-supported fixed prostheses. METHODS: Twenty-five maxillary edentulous patients were recruited in this study. At the time of final prosthesis delivery, the 3D prostheses data and three 3D facial profiles were integrated. After method validation, the 3D position changes of seven soft tissue landmarks were used to reflect the 25 upper lips. The variation of four morphological distances were analyzed to reflect the morphological alteration of the upper lips. Two pairs of dentofacial landmarks were used to analyze the sagittal relative position of the prostheses and soft tissue. The included patients were also grouped to determine the impact of sex, upper lip thickness, and length on lip support changes. RESULTS: The average distance of the two matched relative reliable forehead regions was only 0.32 mm. The sagittal shifts of labrale superius (LS), stomion (STO), crista philtri left (CPHL) and crista philtri right (CPHR) were 3.44 ± 1.39 mm, 2.52 ± 1.38 mm, 3.04 ± 1.18 mm, and 3.12 ± 1.21 mm, respectively. With the exception of the decrease in the length of subnasale (SN)-LS, the length of cheilion right (CHR)-cheilion left (CHL), CPHR-CPHL, and LS-STO significantly increased. The two pairs of dentofacial landmarks had strong positive movement correlations along the sagittal direction. Patients with thinner and longer lips showed more lip support than those with thicker and shorter lips by a clinically insignificant amount. CONCLUSIONS: The integration method of 3D facial and dental data showed high repeatability in constructing the dentofacial relative position. The linear equations reflecting dentofacial relative position could aid clinicians in evaluating the restoration effect and estimate the upper lip variation.

Hard and soft tissue alterations during the healing stage of immediate implant placement and provisionalization with or without connective tissue graft: A randomized clinical trial.

AIMS: To evaluate the hard and soft tissue alterations of immediately placed and provisionalized implants with or without connective tissue graft (CTG). MATERIALS AND METHODS: Single unsalvageable maxillary incisors were replaced with immediately placed and provisionalized implants in 42 participants. The patients were randomly assigned to receive simultaneous CTG (test group) and not receive CTG (control group). Digital impression and cone-beam computed tomography images were obtained before extraction and after 6 months. Mid-facial gingival margin migrations, soft tissue contour changes and hard tissue remodelling were analysed and compared between the two groups using three-dimensional superimposition method. RESULTS: Forty participants completed the study. The test group showed significantly less buccal tissue collapse in the area 2-5 mm apical to the gingival margin. In both groups, the mid-facial gingival margin migrated in an apico-palatal direction and the socket void, except for a triangular space in the bucco-coronal region, demonstrated radiographic new bone formation without statistically significant differences. CONCLUSIONS: The CTG used with immediate implant placement and provisionalization could compensate for the facial tissue collapse, but it did not benefit maintenance of the mid-facial gingival margin position during the 6-month follow-up. New bone formation observed radiographically can be expected in most areas of the socket void, regardless of CTG use (ChiCTR-1900028494).

Assessing Patient Experience and Healthcare Quality of Dental Care Using Patient Online Reviews in the United States: Mixed Methods Study.

BACKGROUND: Over the last two decades, patient review websites have emerged as an essential online platform for doctor ratings and reviews. Recent studies suggested the significance of such websites as a data source for patients to choose doctors for healthcare providers to learn and improve from patient feedback and to foster a culture of trust and transparency between patients and healthcare providers. However, as compared to other medical specialties, studies of online patient reviews that focus on dentists in the United States remain absent. OBJECTIVE: This study sought to understand to what extent online patient reviews can provide performance feedbacks that reflect dental care quality and patient experience. METHODS: Using mixed informatics methods incorporating statistics, natural language processing, and domain expert evaluation, we analyzed the online patient reviews of 204,751 dentists extracted from HealthGrades with two specific aims. First, we examined the associations between patient ratings and a variety of dentist characteristics. Second, we identified topics from patient reviews that can be mapped to the national assessment of dental patient experience measured by the Patient Experience Measures from the Consumer Assessment of Healthcare Providers and Systems (CAHPS) Dental Plan Survey. RESULTS: Higher ratings were associated with female dentists (t71881=2.45, P<.01, g=0.01), dentists at a younger age (F7, 107128=246.97, P<.001, g=0.11), and those whose patients experienced a short wait time (F4, 150055=10417.77, P<0.001, g=0.18). We also identified several topics that corresponded to CAHPS measures, including discomfort (eg, painful/painless root canal or deep cleaning), and ethics (eg, high-pressure sales, and unnecessary dental work). CONCLUSIONS: These findings suggest that online patient reviews could be used as a data source for understanding the patient experience and healthcare quality in dentistry.

Absorbable Microplate Externally Suspending Bronchomalacia in Congenital Heart Disease Infant.

To evaluate the feasibility and efficacy of external suspension with absorbable poly-l-lactic acid material shaping microplates for infants with severe bronchomalacia and congenital heart disease. From November 2017 to January 2019, 11 continual patients with severe bronchomalacia and congenital heart disease underwent bronchial membrane external suspension together with cardiovascular surgery. An absorbable plate made with poly-l-lactic acid material was used as the shaping fixation material in all patients. Data included the details of the operation, and clinical results were collected. The mean age was 1.2 ± 1.0 years, and the mean weight was 7.7 ± 2.9 kg. The patients with cardiac malformations were operated on under low-temperature cardiopulmonary bypass (CPB) through median sternotomy. There were no in-hospital deaths. The CPB time, mechanical ventilation time, and length of intensive care unit stay were 123.9 ± 36.9 min, 20.7 ± 19.4 h, and 71.6 ± 54.9 h, respectively. Two patients underwent surgery through a left posterolateral incision without CPB. One was a double aortic arch repair, and the other was only bronchial membrane external suspension with prior IAA repair. No patients needed ECMO support. The mean follow-up time was 12.1 ± 5.6 months, and no patients were lost to follow-up. No cases of late death were noted, and no patients needed reoperation. According to the CT scans, no patients had bronchial restenosis. External bronchial membrane suspension with an absorbable poly-l-lactic acid material shaping plate, which had better histocompatibility, for infants with severe bronchomalacia and congenital heart disease was a safe and feasible procedure.

Evaluation of intraoral digital impressions for obtaining gingival contour in the esthetic zone: accuracy outcomes.

OBJECTIVES: To assess the accuracy of intraoral digital impressions for gingival contour captured in the esthetic zone in vivo. MATERIAL AND METHODS: Five participants with full upper dentition were recruited. For each participant, three scans were taken using two intraoral scanning (IOS) systems (3Shape TRIOS Color, TRC; CEREC Omnicam, OC) respectively; three conventional impressions (CIs) were taken using vinyl polysiloxane materials. The CIs of all participants were casted and then digitized with a model scanner (IScan D103i, Imetric). Precision was evaluated by superimposing three repeated STL datasets per participant within each group and calculating the (90th-10th)percentile/2 values. The CIs were the reference for evaluating the level of system error of the two IOS systems from the true value. Digital models from CI and each IOS group were superimposed and (mean positive deviation-mean negative deviation)/2[mean negative deviation, mean positive deviation] were calculated to assess trueness level of the two IOS systems. RESULTS: For the soft tissue acquisition, precision results of each group were 45.10 ± 12.54 µm in TRC, 66.04 ± 13.46 µm in OC, and 63.66 ± 17.19 in CI (TRC vs OC, p < 0.001; TRC vs CI, p = 0.001; OC vs CI, p = 0.66). Trueness results were 80.12 ± 8.69[- 112.10 ± 9.88, 48.13 ± 13.79] µm in TRC and 82.70 ± 8.85[- 121.41 ± 15.40, 43.98 ± 11.86] µm (p > 0.05). CONCLUSIONS: In dentate situations, the two tested IOS systems achieved a clinically satisfying accuracy for capturing gingival contour in anterior maxilla, with a comparable or superior precision to the CI. TRC achieved a similar trueness and a higher precision level compared with OC. CLINICAL RELEVANCE: Intraoral digital impressions could be a recommended method for recording 3-dimensional gingival contour in the esthetic zone.