Glycopolymer Grafted Silica Gel as Chromatographic Packing Materials.

The modification of the surface of silica gel to prepare hydrophilic chromatographic fillers has recently become a research interest. Most researchers have grafted natural sugar-containing polymers onto chromatographic surfaces. The disadvantage of this approach is that the packing structure is singular and the application scope is limited. In this paper, we explore the innovative technique of grafting a sugar-containing polymer, 2-gluconamidoethyl methacrylamide (GAEMA), onto the surface of silica gel by atom transfer radical polymerization (ATRP). The SiO2-g-GAEMA with ATRP reaction time was characterized by Fourier infrared analysis, Thermogravimetric analysis (TGA), and elemental analysis. As the reaction time lengthened, the amount of GAEMA grafted on the surface of the silica gel gradually increased. The GAEMA is rich in amide bonds and hydroxyl groups and is a typical hydrophilic chromatography filler. Finally, SiO2-g-GAEMA (reaction time = 24 h) was chosen as the stationary phase of the chromatographic packing and evaluated with four polar compounds (uracil, cytosine, guanosine, and cytidine). Compared with unmodified silica gel, modified silica gel produces sharper peaks and better separation efficiency. This novel packing material may have a potential for application with highly isomerized sugar mixtures.

Imidazolium-based ionic liquids for cellulose pretreatment: recent progresses and future perspectives.

As the most abundant biomass in nature, cellulose is considered to be an excellent feedstock to produce renewable fuels and fine chemicals. Due to its hydrogen-bonded supramolecular structure, cellulose is hardly soluble in water and most conventional organic solvents, limiting its further applications. The emergence of ionic liquids (ILs) provides an environmentally friendly, biodegradable solvent system to dissolve cellulose. This review summarizes recent advances concerning imidazolium-based ILs for cellulose pretreatment. The structure of cations and anions which has an influence on the solubility is emphasized. Methods to assist cellulose pretreatment with ILs are discussed. The state of art of the recovery, regeneration, and reuse aspects of ILs is also presented in this work. The current challenges and development directions of cellulose dissolution in ILs are put forward. Although further studies are still much required, commercialization of IL-based processes has made great progress in recent years.

High-specificity synthesis of novel monomers by remodeled alcohol hydroxylase.

BACKGROUND: Diols are important monomers for the production of plastics and polyurethanes, which are widely used in our daily life. The medium-chain diols with one hydroxyl group at its subterminal end are able to confer more flexibility upon the synthesized materials. But unfortunately, this type of diols has not been synthesized so far. The strong need for advanced materials impelled us to develop a new strategy for the production of these novel diols. In this study, we use the remodeled P450BM3 for high-specificity production of 1,7-decanediol. RESULTS: The native P450BM3 was capable of converting medium-chain alcohols into corresponding α, ω1-, α, ω2- and α, ω3-diols, with each of them accounting for about one third of the total diols, but it exhibited a little or no activity on the short-chain alcohols. Greatly improved regiospecificity of alcohol hydroxylation was obtained by laboratory evolution of P450BM3. After substitution of 12 amino acid residues (J2-F87A), the ratio of 1,7-decanediol (ω-3 hydroxylation) to total decanediols increased to 86.8 % from 34.0 %. Structure modeling and site-directed mutagenesis demonstrated that the heme end residues such as Ala(78), Phe(87) and Arg(255) play a key role in controlling the regioselectivity of the alcohol hydroxylation, while the residues at the mouth of substrate binding site is not responsible for the regioselectivity. CONCLUSIONS: Herein we employ an engineered P450BM3 for the first time to enable the high-specificity biosynthesis of 1,7-decanediol, which is a promising monomer for the development of advanced materials. Several key amino acid residues that control the regioselectivity of alcohol hydroxylation were identified, providing some new insights into how to improve the regiospecificity of alcohol hydroxylation. This report not only provides a good strategy for the biosynthesis of 1,7-decanediol, but also gives a promising approach for the production of other useful diols.

Facile and scalable synthesis of functionalized hierarchical porous polymers for efficient uranium adsorption.

Efficient uranium capture from wastewater holds great importance for the environmental remediation and sustainable development of nuclear energy, but it is a tremendous challenge. Herein, a facile and scalable approach is reported to fabricate functionalized hierarchical porous polymers (PPN-3) decorated with high density of phosphate groups for uranium adsorption. The as-constructed hierarchical porous structure could allow rapid diffusion of uranyl ions, while abundant phosphate groups that serve as adsorption sites could provide the high affinity for uranyl. Consequently, PPN-3 shows a high uranium adsorption uptake of 923.06 mg g-1 and reaches adsorption equilibrium within simply 10 min in uranium-spiked aqueous solution. Moreover, PPN-3 affords selective adsorption of uranyl over multiple metal ions and possesses a rapid and high removal rate of U(VI) in real water systems. Furthermore, this study offers direct polymerization strategy for the cost-effective fabrication of phosphate-functionalized porous organic polymers, which may provide promising application potential for uranium extraction.

Structural elucidation and targeted valorization of untractable lignin from pre-hydrolysis liquor of xylose production via a simple and robust separation approach.

Effective separation of lignin macromolecules from the xylose pre-hydrolysates (XPH) during the xylose production, thus optimizing the separation and purification process of xylose, is of great significance for reducing the production costs, achieving the high value-added utilization of lignin and increasing the industrial revenue. In this study, a simple and robust method (pH adjustment) for the separation of lignin from XPH was proposed and systematically compared with the conventional acid-promoted lignin precipitation method. The results showed that the lignin removal ratio (up to 60.34 %) of this simple method was higher than that of the conventional method, and the proposed method eliminated the necessity of heating and specialized equipment, which greatly reduced the separation cost. Meanwhile, this simple method does not destroy the components in XPH (especially xylose), ensuring the yield of the target product. On the other hand, the obtained lignin was nano-scale with less condensed structures, which also possessed small molecular weights with narrow distribution, excellent antioxidant activity (8-14 times higher than commercial antioxidants) and UV protection properties. In conclusion, the proposed simple separation method could effectively separate lignin from XPH at low cost, and the obtained lignin had potential commercial applications, which would further enhance the overall profitability of industrial production.

Interaction between PEO-PPO-PEO copolymers and a hexapeptide in aqueous solutions.

Interaction between PEO-PPO-PEO copolymers and a hexapeptide, growth hormone releasing peptide-6 (GHRP-6), was investigated by NMR to study the potential use of the copolymers in peptide drug delivery. (1)H NMR and nuclear Overhauser effect spectroscopy (NOESY) measurements determined that PO methyl protons interacted with methyl protons of the Ala moiety, aromatic protons of the Trp moiety, and some of the Phe aromatic protons. The Lys moiety and part of the Phe moiety entered the hydrophilic EO environment via hydrogen bonding. PEO-PPO-PEO copolymers and the peptide formed a complex in 1:1 stoichiometry. Binding constants between copolymers and GHRP-6 were determined, and it was indicated that the copolymers containing more EO and PO units will lead to greater affinity with the peptide. Isothermal titration calorimetry (ITC) measurements confirmed the results of NMR experiments. This study indicates that PEO-PPO-PEO copolymers have great potential in delivering peptide drugs.

Spontaneous vesicle formation of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer.

A novel method has been developed to prepare vesicles from aqueous solutions of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer, by adding anionic surfactant sodium dodecyl sulfate (SDS) and inorganic salt NaF. As determined by TEM and dynamic light scattering (DLS) measurements, the average diameter of vesicles is about 800 nm having 50 nm outer shell thickness. Identifying hydrophobic interactions between the block copolymers and the microenvironments around the vesicles using FTIR, 1H NMR, and fluorescence spectroscopy techniques revealed the vesicle formation mechanism. The spontaneously formed vesicles were further cross-linked by converting the terminal hydroxyl groups of block copolymers into aldehydes, and then chemically bridging the polymer chains by the reaction between aldehydes and diamine compounds. The cross-linked vesicles are proved much more stable than free vesicles even at higher dilutions. The obtained vesicles with good stability and biocompatibility are promising candidates for widespread applications.

Enzymatic hydrolysis of penicillin for 6-APA production in three-liquid-phase system.

A dodecane/thermosensitive polymer/water three-liquid-phase system was introduced for enzymatic hydrolysis of penicillin G (Pen G) for 6-aminopenicillanic acid (6-APA). The enzyme was covalently attached to the terminal of PEO-PPO-PEO polymer (L63), which would be transferred into a polymer coacervate phase at high temperature above its "cloud point". 6-APA was primarily resided in the aqueous phase due to its zwitterionic nature. More than 70% phenylacetic acid (PAA) was transferred into the organic phase using trioctylmethylammonium hydroxide and trihexyl-(tetradecyl)phosphonium bis 2,4,4-trimethylpentylphosphinate ionic liquids (Cyphos IL-104) mixture at pH 5.5, while most of Pen G resided in water. As a result, high operational pH was permitted in three-liquid-phase system, which leads to higher enzymatic activity (120 IU at 40 degrees C) and stability (enzymatic half-time up to 55 h at 60 degrees C) in comparison with the value in butyl acetate/water two-phase system. On the other hand, two products in three-liquid-phase system might be automatically separated from the enzyme sphere into different phases at the same time, which facilitated the reaction equilibrium towards the product's side with 6-APA productivity of 80% at 42 degrees C, pH 5.5.

Analysis of glycyrrhizic acid and liquiritin in liquorice root with microwave-assisted micellar extraction and pre-concentration.

The feasibility of employing a non-ionic surfactant (Triton X-100) as an alternative and effective solvent for the microwave-assisted extraction of glycyrrhizic acid and liquiritin from liquorice root has been demonstrated. When compared with commonly used solvents, 5% Triton X-100 yielded higher extraction efficiency than aqueous solutions of ethanol or methanol. Under optimal conditions, i.e. 5% Triton X-100 (v/v) and microwave-assisted extraction for 3-5 min at 100 degrees C, the percentage extraction of active ingredients reached the highest value. The pre-concentration factor for the glycyrrhizic acid and liquiritin was about 13, and the cloud-point extraction recoveries for the two ingredients were 98.4 and 96.1%, respectively. The results showed that the coupling of microwave-assisted extraction and cloud-point extraction could be employed as a new and effective approach for the rapid extraction and pre-concentration of pharmacologically active ingredients from liquorice root without disturbing the subsequent chromatographic analysis.

Temperature-dependent aggregation and disaggregation of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymer in aqueous solution.

Aggregation and disaggregation of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers, Pluronics P103 and P104, in aqueous solutions during a heating and cooling cycle were investigated by dynamic laser scattering (DLS) and 1H NMR spectroscopy. Temperature hysteresis was observed by DLS when cooling the copolymer aqueous solutions because larger aggregates existed at temperatures lower than critical micellization temperature (CMT), but no temperature differences were observed by NMR. This phenomenon was explained as the forming of water-swollen micelles at temperatures lower than CMT during the cooling process.

Probing paeonol-pluronic polymer interactions by 1H NMR spectroscopy.

By using a combination of 1H NMR spectroscopy, two-dimensional heteronuclear single-quantum coherence-resolved (1)H{(13)C} and homonuclear rotating-frame Overhauser enhancement NMR correlation experiments with diffusion ordered spectroscopy (DOSY), the location and distribution of a hydrophobic drug, paeonol, have been established with respect to the methyl groups of the poly(ethylene oxide)-poly(propylene oxide) -poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymer. The interaction between them is adjustable according to the different temperature-dependent hydrophilicities or hydrophobicities of the triblock copolymer components. On the other hand, such interactions influence the self-assembly properties of the block copolymer amphiphiles in solution. The amount of anhydrous methyl groups of PPO segments shows an increase with increasing paeonol concentration. It was also demonstrated that the shell-crosslinking of the Pluronic polymer has an effect in increasing the amount of anhydrous methyl groups and thus increasing the hydrophobicity of Pluronic micelles. This might be the deeper reason underlying the increase in drug-loading capacity and prolongation in release time of Pluronic micelles for drug delivery after the shell-crosslinking. Changes in self-diffusion coefficients of paeonol with varying copolymer concentrations and types were also determined by the diffusion-based NMR DOSY technique, and values of K(a), DeltaG, and n were calculated.

Effect of ionic liquids on the aggregation behavior of PEO-PPO-PEO block copolymers in aqueous solution.

Effect of 1-butyl-3-methyl-imidazolium bromide (BmimBr) on the aggregation behavior of PEO-PPO-PEO Pluronic P104 aqueous solution was studied by Fourier transform infrared (FTIR) spectroscopy, freeze fracture transmission electron microscopy (FF-TEM), dynamic light scattering (DLS), and NMR spectroscopy. When the BmimBr concentration was below 1.232 mol/L, the critical micelle temperature (CMT) of Pluronic P104 remained constant, while the size of micelles increased with increasing the BmimBr concentration; above this concentration, the CMT of Pluronic P104 decreased abruptly, and bigger clusters of BmimBr were formed. The selective nuclear Overhauser effect (NOE) spectrum indicates that the PO block of the P104 interacts with the butyl group of the Bmim+ cation by hydrophobic interaction. It suggests that when the concentration of BmimBr is below 1.232 mol/L, there are P104 micelles in the aqueous solution with BmimBr embedding to the micellar core, while above this concentration, P104 micelles and BmimBr clusters coexist in the system.

Interaction of urea with pluronic block copolymers by 1H NMR spectroscopy.

Solution 1H NMR techniques were used to characterize the interaction of urea with poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers. The urea was established to interact selectively with the PEO blocks of the block copolymer, and the interaction sites were found not to change with increasing temperature. Such interactions influence the self-assembly properties of the block copolymer in solution by increasing the hydration of the block copolymers and stabilizing the gauche conformation of the PPO chain. Therefore, urea increases the critical micellization temperature (CMT) values of PEO-PPO-PEO copolymers, and the effect of urea on the CMT is more pronounced for copolymers with higher PEO contents and lower for those with increased contents of PPO segments.

Oil-induced aggregation of block copolymer in aqueous solution.

The oil-induced aggregation behavior of PEO-PPO-PEO Pluronic P84 [(EO)19(PO)39(EO)19] in aqueous solutions has been systematically investigated by 1H NMR spectroscopy, freeze-fracture transmission electron microscopy (FF-TEM), and dynamic light scattering (DLS). The critical micellization temperature (CMT) for P84 in the presence of oils decreases with increasing oil concentration. The effectiveness of various oils in decreasing the CMT of block copolymer follows the order m-xylene (C(8)H(10)) > toluene (C(7)H(8)) > benzene (C(6)H(6)) > n-octane (C(8)H(18)) > n-hexane (C(6)H(14)) approximately cyclohexane (C(6)H(12)). It was found that the amount of anhydrous PO methyl groups increases whereas the amount of hydrated PO methyl groups decreases upon the addition of oils. At low oil concentration, the oil molecules are entrapped by the micellar core, but as the oil concentration increases above a certain value, the micellar core swells significantly as a result of the penetrated oil molecules, and much larger aggregates are formed. Intermolecular rotating-frame nuclear Overhauser effect (ROE) measurements between P84 and benzene were performed at 10 and 40 degrees C. The specific interaction between benzene and the methyl groups of PPO was determined, and it was observed that the interaction site remained unchanged as the temperature was increased.

Micellization in aqueous solution of an ethylene oxide-propylene oxide triblock copolymer, investigated with 1H NMR spectroscopy, pulsed-field gradient NMR, and NMR relaxation.

(1)H nuclear magnetic resonance (NMR) spectroscopy has been applied to study the temperature and concentration-induced micellization of a poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) triblock copolymer, Pluronic P105, in D(2)O solutions in the temperature range from 5 to 45 degrees C and the concentration range from 0.01 to 15% (w/v). The intrinsic probes, the chemical shift, and the half-height width of the PO CH(3) signal are very sensitive to the local environment and can be used to characterize the temperature and concentration-dependent aggregation process. When the temperature approaches the critical micellization temperature or the polymer concentration reaches the critical micellization concentration, the chemical shift of the PO CH(3) signal moves toward lower ppm values and the half-height width of the PO CH(3) signal shows a sudden increase. It indicates that the methyl groups are experiencing a progressively less polar environment and transferring from water to the hydrophobic micellar core. The hydrodynamic radius of the unimers and the micelles are determined as be 1.8 and 5.0 nm by means of pulsed-field gradient spin-echo (PGSE) NMR. They were independent of temperature and concentration. The drastic shortening of spin-lattice relaxation time T(1) for the PO CH(3)/CH(2) protons in the transition region suggested that the PPO blocks are located in a "liquid-like" micellar core, whereas the exponential increase of T(1) for the PEO CH(2) protons implied that the PEO blocks are still keeping in contact with surrounding water. Thermodynamics analysis according to a closed association model shows that the micellization process is entropy-driven and has an endothermic micellization enthalpy.

A novel autolysis system controlled by magnesium and its application to poly (3-hydroxypropionate) production in engineered Escherichia coli.

The release of intracellular products, especially polyhydroxyalkanoates, is still a great challenge in industry. To solve this bottleneck, a novel autolysis system strictly controlled with magnesium was constructed and applied to poly(3-hydroxypropionate) production in engineered Escherichia coli. The autolysis system was constructed by inserting the 5'untranslated region (5'UTR) behind promoter PmgtA with lysis genes (S, R, and Rz, from E. coli) overexpressed. The autolysis system functioned well (lysis efficiency of more than 90%) in the P3HP producer with double plasmids containing lysis genes and P3HP biosynthesis genes, whereas the P3HP production was reduced due to plasmid losses. After the autolysis genes and P3HP biosynthesis genes were integrated into one plasmid, the P3HP content of 72.7% (2.4 times of the control) and the plasmid stability of 79.8 ± 3.1% were achieved in strain Q2646 with promoter PmgtA-UTR. However, the strain Q2647 with promoter PmgtA could not accumulate P3HP because of rapid cell lysis. The novel autolysis system activated in Mg2+-depleted conditions proves to be feasible for polyhydroxyalkanoates production, which may have great application potential for other intracellular products.

Enhanced poly(3-hydroxypropionate) production via ß-alanine pathway in recombinant Escherichia coli.

Poly(3-hydroxypropionate) (P3HP) is a thermoplastic with great compostability and biocompatibility, and can be produced through several biosynthetic pathways, in which the glycerol pathway achieved the highest P3HP production. However, exogenous supply of vitamin B12 was required to maintain the activity of glycerol dehydratase, resulting in high production cost. To avoid the addition of VB12, we have previously constructed a P3HP biosynthetic route with ß-alanine as intermediate, and the present study aimed to improve the P3HP production of this pathway. L-aspartate decarboxylase PanD was found to be the rate-limiting enzyme in the ß-alanine pathway firstly. To improve the pathway efficiency, PanD was screened from four different sources (Escherichia coli, Bacillus subtilis, Pseudomonas fluorescens, and Corynebacterium glutamicum). And PanD from C. glutamicum was found to have the highest activity, the P3HP production was improved in flask cultivation with this enzyme. To further improve the production, the host strain was screened and the culture condition was optimized. Under optimal conditions, production and content of P3HP reached to 10.2 g/L and 39.1% (wt/wt [cell dry weight]) in an aerobic fed-batch fermentation. To date, this is the highest P3HP production without VB12.

Effect of acid on the aggregation of poly(ethylene xide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers.

The acid effect on the aggregation of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers EO(20)PO(70)EO(20) has been investigated by transmission electron microscopy (TEM), particle size analyzer (PSA), Fourier transformed infrared, and fluorescence spectroscopy. The critical micellization temperature for Pluronic P123 in different HCl aqueous solutions increases with the increase of acid concentration. Additionally, the hydrolysis degradation of PEO blocks is observed in strong acid concentrations at higher temperatures. When the acid concentration is low, TEM and PSA show the increase of the micelle mean diameter and the decrease of the micelle polydispersity at room temperature, which demonstrate the extension of EO corona and tendency of uniform micelle size because of the charge repulsion. When under strong acid conditions, the aggregation of micelles through the protonated water bridges was observed.

An ecological new approach for treating Cr(VI)-containing industrial wastewater: Photochemical reduction.

An ecological new approach for photochemical reduction of Cr(VI) in aqueous solution by adding into water-soluble copolymer, polyethylene glycol (PEG), was investigated. Various influences including light intensity, initial solution pH value, PEG molecular weight and initial concentration ratio of PEG to Cr(VI) on photochemical reduction of Cr(VI) were discussed, and a possible reaction mechanism was proposed. Experimental results revealed that Cr(VI) could be reduced to Cr(III) by PEG under sunlight irradiation. The photo-reduction rate of Cr(VI) increased with the decrease of solution pH and PEG molecular weight, but increased with the light intensity. The reduction percentage of Cr(VI) increased with the initial concentration ratio of PEG to Cr(VI). When the initial solution pH value was below 3.0, almost all of Cr(VI) was completely reduced to Cr(III) within 20 min of 50 × 10(3) lux solar irradiation in the presence of PEG. After photo-reduction, PEG and Cr(III) in aqueous solutions could be recovered by adding into a high-concentrated Na2SO4 aqueous solution to induce the formation of a stable PEG-based aqueous biphasic system. By doing so, Na2SO4 in aqueous solution could also be removed. The present work highlights a promising new route for treating the industrial wastewater containing toxic Cr(VI) ions by adding into environmental-friendly PEG for photo-reduction of Cr(VI) to Cr(III), and then salting-out recovery of PEG and removal of Cr(III) in wastewater by adding into another high-salt wastewater, so that the high-salt wastewater could also be treated.

Aptamer and PNIPAAm co-conjugated nanoparticles regulate activity of enzyme with different temperature.

In this paper, we described a temperature responsive nano-system that can regulate activity of enzyme with different temperature. Temperature responsive polymer poly(N-isopropylacrylamide) (PNIPAAm), with low critical solution temperature of 32°C, was synthesized with thiol modification. PNIPAAm and thrombin aptamer were co-functionalized on the surface of gold nanoparticles for effective regulation of thrombin activity with different temperature. On the one hand, we studied the thermal responsive properties of this inhibitor via UV-visible spectroscopy. On the other hand, we investigated the regulation of thrombin activity by this platform with different temperature. The PNIPAAm chains could extend and shrink with different temperature, which suggested that PNIPAAm on the surface of gold nanoparticles could regulate interaction between thrombin and aptamer according to temperature changing. At 25°C, PNIPAAm was hydrophilic extended state, which blocked the interaction between thrombin and aptamer on the surface of gold nanoparticles, therefore thrombin activity had no change. On the contrary, at 37°C, PNIPAAm transformed from hydrophilic extended state to hydrophobic shrank state, allowing the aptamer to capture thrombin, inhibiting the activity of thrombin. More interestingly, this regulation was reverse to normal condition, where 37°C was always the optimum reaction temperature for most of human enzymes. This system we prepared was opposite, which was capable of inhibiting the thrombin activity at 37°C. Furthermore, this was the first report of regulation of thrombin activity using this temperature responsive platform.