Injectable and Self-Healing Nanocomposite Hydrogels with Ultrasensitive pH-Responsiveness and Tunable Mechanical Properties: Implications for Controlled Drug Delivery.

Injectable, self-healing, and pH-responsive hydrogels are great intelligent drug delivery systems for controlled and localized therapeutic release. Hydrogels that show pH-sensitive behaviors in the mildly acidic range are ideal to be used for the treatment of regions showing local acidosis like tumors, wounds and infections. In this work, we present a facile preparation of an injectable, self-healing, and supersensitive pH-responsive nanocomposite hydrogel based on Schiff base reactions between aldehyde-functionalized polymers and amine-modified silica nanoparticles. The hydrogel shows fast gelation within 10 s, injectability, and rapid self-healing capability. Moreover, the hydrogel demonstrates excellent stability under neutral physiological conditions, while a sharp gel-sol transition is observed, induced by a faintly acidic environment, which is desirable for controlled drug delivery. The pH-responsiveness of the hydrogel is ultrasensitive, where the mechanical properties, hydrolytic degradation, and drug release behaviors can alter significantly when subjected to a slight pH change of 0.2. Additionally, the hydrogel's mechanical and pH-responsive properties can be readily tuned by its composition. Its excellent biocompatibility is confirmed by cytotoxicity tests toward human dermal fibroblast cells (HDFa). The novel injectable, self-healing, and sensitive pH-responsive hydrogel serves as a promising candidate as a localized drug carrier with controlled delivery capability, triggered by acidosis, holding great promise for cancer therapy, wound healing, and infection treatment.

Biomimetic Lubrication and Surface Interactions of Dopamine-Assisted Zwitterionic Polyelectrolyte Coatings.

A bioinspired zwitterionic polyelectrolyte coating with excellent hydration ability has been regarded as a promising lubricating candidate for modifying artificial joint cartilage surface. In physiological fluids, the ubiquitous proteins play an important role in achieving outstanding boundary lubrication; however, a comprehensive understanding of the hydration lubrication between polyelectrolyte coatings and proteins still remains unclear. In this work, a facile fabrication of ultrasmooth polyelectrolyte coatings was developed via codeposition of synthesized poly(dopamine methacrylamide- co-2-methacryloyloxyethyl phosphorylcholine) (P(DMA- co-MPC)) and dopamine (DA) in a mild condition. Upon optimization of the feeding ratio of P(DMA- co-MPC) and DA, the as-fabricated PDA/P(DMA- co-MPC) coatings exhibit excellent lubricating properties when sliding with each other (friction coefficient µ = 0.036 ± 0.002, ∼2.8 MPa), as well as sliding with a model protein (bovine serum albumin (BSA)) layer (µ = 0.041 ± 0.005, ∼4.8 MPa) in phosphate-buffered saline (PBS, pH 7.4). Intriguingly, the lubrication in both systems shows Amontons-like behaviors: the friction is directly proportional to the applied load but independent of the shear velocity. Moreover, the PDA/P(DMA- co-MPC) coatings could resist the protein fouling (i.e., BSA) in PBS, which is crucial to prevent the surfaces from being contaminated when applied in biological media, thus maintaining their lubricating properties. Our results provide a versatile approach for facilely fabricating polyelectrolyte coatings with superior lubrication properties to both polyelectrolyte coatings and protein surfaces, with useful implications into the development of novel lubricating coatings for bioengineering applications (e.g., artificial joints).

Bioinspired engineered proteins enable universal anchoring strategy for surface functionalization.

HYPOTHESIS: Conventional coating strategies and materials for bio-applications with protective, diagnostic, and therapeutic functions are commonly limited by their arduous preparation processes and lack of on-demand functionalities. Herein, inspired by the 'root-leaf' structure of grass, a series of novel polyacrylate-conjugated proteins can be engineered with sticky bovine serum albumin (BSA) protein as a 'root' anchoring layer and a multifunctional polyacrylate as a 'leaf' functional layer for the facile coating procedure and versatile surface functionalities. EXPERIMENTS: The engineered proteins were synthesized based on click chemistry, where the 'root' layer can universally anchor onto both organic and inorganic substrates through a facile dip/spraying method with excellent stability in harsh solution conditions, thanks to its multiple adaptive molecular interactions with substrates that further elucidated by molecular force measurements between the 'root' BSA protein and substrates. The 'leaf' conjugated-polyacrylates imparted coatings with versatile on-demand functionalities, such as resistance to over 99% biofouling in complex biofluids, pH-responsive performance, and robust adhesion with various nanomaterials. FINDINGS: By synergistically leveraging the universal anchoring capabilities of BSA with the versatile physicochemical properties of polyacrylates, this study introduces a promising and facile strategy for imparting novel functionalities to a myriad of surfaces through engineering natural proteins and biomaterials for biotechnical and nanotechnical applications.

A pH and Temperature Dual-Responsive Microgel-Embedded, Adhesive, and Tough Hydrogel for Drug Delivery and Wound Healing.

Stimuli-responsive hydrogels have attracted much attention over the past decade for potential bioengineering applications such as wound dressing and drug delivery. In this work, a pH and temperature dual-responsive microgel-embedded hydrogel has been fabricated by incorporating poly(N-isopropylacrylamide-co-acrylic acid) (PNIPAAm-co-AAc) based microgel particles into polyacrylamide (PAAm)/chitosan (CS) semi-interpenetrating polymer network (semi-IPN), denoted as microgel@PAM/CS. The resultant hydrogel possesses excellent mechanical properties including stretchability, compressibility, and elasticity. In addition, the microgel@PAM/CS hydrogels can tightly adhere to the surfaces of a variety of tissues such as porcine skin, kidney, intestine, liver, and heart. Moreover, it shows controlled dual-drug release profile of both bovine serum albumin (BSA) (as a model protein) and sulfamethoxazole (SMZ), an antibiotic. Excellent antimicrobial properties are obtained for SMZ-loaded microgel@PAM/CS hydrogels. Compared with traditional drug administration methods such as by mouth, injection, and inhalation, the microgel@PAM/CS hydrogels possess advantages such as higher drug loading efficiency (by more than 80%) and controllable and sustained (over 48 h) release. The microgel@PAM/CS hydrogels can significantly enhance the wound healing process. This work provides a facile approach for the fabrication of multifunctional stimuli-responsive microparticle-embedded hydrogels with semi-IPN structures, and the as-prepared microgel@PAM/CS hydrogels have great potential for applications as smart wound dressing materials in biomedical engineering.

Cancer theranostic platforms based on injectable polymer hydrogels.

Theranostic platforms that combine therapy with diagnosis not only prevent the undesirable biological responses that may occur when these processes are conducted separately, but also allow individualized therapies for patients. Polymer hydrogels have been employed to provide well-controlled drug release and targeted therapy in theranostics, where injectable hydrogels enable non-invasive treatment and monitoring with a single injection, offering greater patient comfort and efficient therapy. Efforts have been focused on applying injectable polymer hydrogels in theranostic research and clinical use. This review highlights recent progress in the design of injectable polymer hydrogels for cancer theranostics, particularly focusing on the elements/components of theranostic hydrogels, and their cross-linking strategies, structures, and performance with regard to drug delivery/tracking. Therapeutic agents and tracking modalities that are essential components of the theranostic platforms are introduced, and the design strategies, properties and applications of the injectable hydrogels developed via two approaches, namely chemical bonds and physical interactions, are described. The theranostic functions of the platforms are highly dependent on the architecture and components employed for the construction of hydrogels. Challenges currently presented by theranostic platforms based on injectable hydrogels are identified, and prospects of acquiring more comfortable and personalized therapies are proposed.

Coacervate-Based Instant and Repeatable Underwater Adhesive with Anticancer and Antibacterial Properties.

Underwater adhesion is a great challenge for the development of adhesives as the attractive interfacial intermolecular interactions are usually weakened by the surface hydration layer. The coacervation process of sessile organisms like marine mussels and sandcastle worms has inspired substantial research interest in the fabrication of long-lasting underwater adhesives, but they generally suffer from time-consuming curing triggered by surrounding environmental changes and cannot reserve the adhesiveness once damaged. Herein, an instant and repeatable underwater adhesive was developed based on the coacervation of tannic acid (TA) and poly(ethylene glycol)77-b-poly(propylene glycol)29-b-poly(ethylene glycol)77 (PEG-PPG-PEG, F68), which was driven by hydrogen-bonding interaction, and the hydrophobic cores of F68 micelles offered an additional cross-linking to enhance the mechanical properties. The TA-F68 coacervates could be facilely painted on different substrates, exhibiting robust and instant underwater adhesion (with adhesion strength up to 1.1 MPa on porcine skin) and excellent repeatability (at least 1000 cycles), superior to the previously reported coacervates. Due to the biological activities of TA, the underwater adhesive displayed innate anticancer and antibacterial properties against different types of cancer cells and bacteria, showing great potential for diverse biomedical applications, such as injectable drug carriers, tissue glues, and wound dressings.

A Nanomechanical Study on Deciphering the Stickiness of SARS-CoV-2 on Inanimate Surfaces.

The SARS-CoV-2 virus that causes the COVID-19 epidemic can be transmitted via respiratory droplet-contaminated surfaces or fomites, which urgently requires a fundamental understanding of intermolecular interactions of the coronavirus with various surfaces. The corona-like component of the outer surface of the SARS-CoV-2 virion, named spike protein, is a key target for the adsorption and persistence of SARS-CoV-2 on various surfaces. However, a lack of knowledge in intermolecular interactions between spike protein and different substrate surfaces has resulted in ineffective preventive measures and inaccurate information. Herein, we quantified the surface interaction and adhesion energy of SARS-CoV-2 spike protein with a series of inanimate surfaces via atomic force microscopy under a simulated respiratory droplet environment. Among four target surfaces, polystyrene was found to exhibit the strongest adhesion, followed by stainless steel (SS), gold, and glass. The environmental factors (e.g., pH and temperature) played a role in mediating the spike protein binding. According to systematic quantification on a series of inanimate surfaces, the adhesion energy of spike protein was found to be (i) 0-1 mJ/m2 for hydrophilic inorganics (e.g., silica and glass) due to the lack of hydrogen bonding, (ii) 2-9 mJ/m2 for metals (e.g., alumina, SS, and copper) due to the variation of their binding capacity, and (iii) 6-11 mJ/m2 for hydrophobic polymers (e.g., medical masks, safety glass, and nitrile gloves) due to stronger hydrophobic interactions. The quantitative analysis of the nanomechanics of spike proteins will enable a protein-surface model database for SARS-CoV-2 to help generate effective preventive strategies to tackle the epidemic.