Polymer-Tethered Nanoparticles: From Surface Engineering to Directional Self-Assembly.

Current interest in nanoparticle ensembles is motivated by their collective synergetic properties that are distinct from or better than those of individual nanoparticles and their bulk counterparts. These new advanced optical, electronic, magnetic, and catalytic properties can find applications in advanced nanomaterials and functional devices, if control is achieved over nanoparticle organization. Self-assembly offers a cost-efficient approach to produce ensembles of nanoparticles with well-defined and predictable structures. Nanoparticles functionalized with polymer molecules are promising building blocks for self-assembled nanostructures, due to the comparable dimensions of macromolecules and nanoparticles, the ability to synthesize polymers with various compositions, degrees of polymerization, and structures, and the ability of polymers to self-assemble in their own right. Moreover, polymer ligands can endow additional functionalities to nanoparticle assemblies, thus broadening the range of their applications.In this Account, we describe recent progress of our research groups in the development of new strategies for the self-assembly of nanoparticles tethered to macromolecules. At the beginning of our journey, we developed a new approach to patchy nanoparticles and their self-assembly. In a thermodynamically driven strategy, we used poor solvency conditions to induce homopolymer surface segregation in pinned micelles (patches). Patchy nanoparticles underwent self-assembly in a well-defined and controlled manner. Following this work, we overcame the limitation of low yield of the generation of patchy nanoparticles, by using block copolymer ligands. For block copolymer-capped nanoparticles, patch formation and self-assembly were "staged" by using distinct stimuli for each process. We expanded this work to the generation of patchy nanoparticles via dynamic exchange of block copolymer molecules between the nanoparticle surface and micelles in the solution. The scope of our work was further extended to a series of strategies that utilized the change in the configuration of block copolymer ligands during nanoparticle interactions. To this end, we explored the amphiphilicity of block copolymer-tethered nanoparticles and complementary interactions between reactive block copolymer ligands. Both approaches enabled exquisite control over directional and self-limiting self-assembly of complex hierarchical nanostructures. Next, we focused on the self-assembly of chiral nanostructures. To enable this goal, we attached chiral molecules to the surface of nanoparticles and organized these hybrid building blocks in ensembles with excellent chiroptical properties. In summary, our work enables surface engineering of polymer-capped nanoparticles and their controllable and predictable self-assembly. Future research in the field of nanoparticle self-assembly will include the development of effective characterization techniques, the synthesis of new functional polymers, and the development of environmentally responsive self-assembly of polymer-capped nanoparticles for the fabrication of nanomaterials with tailored functionalities.

First report of root rot caused by Fusarium commune on American ginseng (Panax quinquefolium L.) in China.

American ginseng (Panax quinquefolium L.) is one of the most valuable herb crops because of its unique pharmacological effects. In 2019, American ginseng plants withered and root rot with incidences of 20-45% were observed in about 70000m2 of ginseng production field located in mountainous valley of Benxi city (41º23'32" N, 124º04'27" E), Liaoning Province in China. Disease symptoms included chlorotic leaves with dark brown discoloration extending gradually from the basal to the apical part of the leaves. Water-soaked, irregular lesions appeared on the surface of roots and rotten at later stage. Twenty-five symptomatic roots were surface-sterilized by immersion in 2% sodium hypochlorite (NaOCl) for 3 min, followed by rinsing three times in sterilized water. The sections healthy tissues bordered rotten tissues, i.e. the leading edge, were cut into 4-5 mm pieces with a sterile scalpel and 4 pieces were placed on each PDA plate. After 5 days incubation at 26°C, total of 68 single spores were obtained from the colonies with an inoculation needle under stereomicroscope. Colonies from single conidia were white to greyish white, densely floccose to fluffy, and the reverse grayish yellow with dull violet pigmentation. Single-celled and ovoid microconidia in false heads were borne on aerial monophialidic or polyphialidic conidiophores on Carnation Leaf Agar (CLA) media, and measured 5.0 -14.5 × 3.0 -4.8 µm (n=25). Macroconidia were two to four septa, slightly curved, apical and basal cells were also curved, and they measured 22.5 - 45.5 × 4.5 - 6.3 µm (n=25). Chlamydospores were singly or in pairs, circular or subcircular, smooth, and measuring 5 - 10.5 µm (n=25) in diameter. Morphologically, the isolates were identified as Fusarium commune (Skovgaard et al. 2003; Leslie and Summerell 2006 ). To confirm the identity, the rDNA partial translation elongation factor1 alpha (TEF-a) gene and the internal transcribed spacer (ITS) region of ten isolates were amplified and sequenced (O'Donnell et al. 2015; White et al. 1990). Identical sequences were obtained, and one representative sequence of isolate BGL68 was submitted to GenBank. BLASTn analysis of both the TEF-α (MW589548) and the ITS (MW584396) sequences, revealed 100% and 99.46 % sequence identity to F. commune MZ416741 and KU341322, respectively. The pathogenicity test was conducted under greenhouse conditions. The surface of healthy 2-year-old American ginseng roots was washed and disinfested in 2% NaOCl for 3 min before rinsing in sterilized water. Twenty roots were wounded with a toothpick, resulting in tiny perforations (1.0 × 1.0×3.0 mm), 3 perforations were wounded on each root. Inoculums was prepared from the culture of isolate BGL68 incubate in potato dextrose broth (PD) for 5 days at 26°C,140 rpm. Ten wounded roots were immersed in a conidial suspension (2 × 105 conidia/ml) for four hours in a plastic bucket, and planted in five containers (two roots per container) filled with sterile soil. Another ten wounded roots were immersed in sterilized distilled water and planted in five containers as controls. The containers were incubated for four weeks in a greenhouse at temperature between 23°C and 26°C, under a 12-hr light and dark regime, and irrigate with sterile water every 4 days. Three weeks after inoculation, all inoculated plants exhibited chlorotic leaves, wilting and root rot. The taproot and the fibrous roots showed brown to black root rot and no symptoms in non-inoculated controls. The fungus was reisolated from the inoculated plants, but not from any of the control plants. The experiment was repeated two times with similar results. This is the first report of root rot caused by F. commune on American ginseng in China. The disease might bring a threat to this ginseng production and should be implemented effective control measures to reduce losses.

Excellent Dark/Light Dual-Mode Photoresponsive Activities Based on g-C3N4/CMCh/PVA Nanocomposite Hydrogel Using Electron Beam Radiation Method.

Photocatalytic technology for inactivating bacteria in water has received much attention. In this study, we reported a dark-light dual-mode sterilized g-C3N4/chitosan/poly (vinyl alcohol) hydrogel (g-CP) prepared through freeze-thaw cycling and an in situ electron-beam radiation method. The structures and morphologies of g-CP were confirmed using Fourier infrared spectroscopy (FTIR), X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), solid ultraviolet diffuse reflectance spectroscopy (UV-vis DRS), and Brunauer-Emmett-Teller (BET). Photocatalytic degradation experiments demonstrated that 1 wt% g-CP degraded rhodamine B (RhB) up to 65.92% in 60 min. At the same time, g-CP had good antimicrobial abilities for Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) within 4 h. The shapes of g-CP were adjustable (such as bar, cylinder, and cube) and had good mechanical properties and biocompatibility. The tensile and compressive modulus of 2 wt% g-CP were 0.093 MPa and 1.61 MPa, respectively. The Cell Counting Kit-8 (CCK-8) test and Hoechst33342/PI double staining were used to prove that g-CP had good biocompatibility. It is expected to be applied to environmental sewage treatment and wound dressing in the future.

Identification of the characteristics of infiltrating immune cells in pulpitis and its potential molecular regulation mechanism by bioinformatics method.

OBJECTIVE: The inflammation of dental pulp will also trigger an immune response. The purpose of this study is to demonstrate the immune cell's function and explore their regulatory molecules and signal pathways in pulpitis. METHOD: The CIBERSORTx method was used to quantitatively analyze 22 types of immune cells infiltrating in the GSE77459 dataset of dental pulp tissues. The immune-related differential genes (IR-DEGs) were further screened and enriched for the GO and KEGG pathways. Protein-protein interaction (PPI) networks were constructed and the hub IR-DEGs were screened. Finally, we constructed the regulatory network of hub genes. RESULTS: The GSE77459 dataset screened 166 IR-DEGs and was enriched for three signal pathways involved in pulpitis development: chemokine signaling, TNF signaling, and NF-κB signaling. Significant differences in immune cell infiltration were observed between normal and inflamed dental pulp. The proportions of M0 macrophages, neutrophils, and follicular helper T cells were significantly higher than that of the normal dental pulp, while the proportions of resting mast cells, resting dendritic cells, CD8 T cells, and monocytes were significantly lower. The random forest algorithm concluded that M0 macrophages and neutrophils were the two most important immune cells. We identified five immune-related hub genes IL-6, TNF-α, IL-1ß, CXCL8, and CCL2. In addition, IL-6, IL-1ß, and CXCL8 are highly correlated with M0 macrophages and neutrophils, and the five hub genes have many shared regulatory molecules: four miRNAs and two lncRNAs, three transcription factors. CONCLUSION: Immune cell infiltration plays an important role in pulpitis among which M0 macrophages and neutrophils are the most significant immune cells. IL-6, TNF-α, IL-1, CXCL8, and CCL2 may be essential molecule of the immune response regulation network in pulpitis. This will help us understand the immune regulatory network in pulpitis.

The impact of anti-COVID-19 nonpharmaceutical interventions on hand, foot, and mouth disease-A spatiotemporal perspective in Xi'an, northwestern China.

Growing evidence has shown that anti-COVID-19 nonpharmaceutical interventions (NPIs) can support prevention and control of various infectious diseases, including intestinal diseases. However, most studies focused on the short-term mitigating impact and neglected the dynamic impact over time. This study is aimed to investigate the dynamic impact of anti-COVID-19 NPIs on hand, foot, and mouth disease (HFMD) over time in Xi'an City, northwestern China. Based on the surveillance data of HFMD, meteorological and web search data, Bayesian Structural Time Series model and interrupted time series analysis were performed to quantitatively measure the impact of NPIs in sequent phases with different intensities and to predict the counterfactual number of HFMD cases. From 2013 to 2021, a total number of 172,898 HFMD cases were reported in Xi'an. In 2020, there appeared a significant decrease in HFMD incidence (-94.52%, 95% CI: -97.54% to -81.95%) in the first half of the year and the peak period shifted from June to October by a small margin of 6.74% compared to the previous years of 2013 to 2019. In 2021, the seasonality of HFMD incidence gradually returned to the bimodal temporal variation pattern with a significant average decline of 61.09%. In particular, the impact of NPIs on HFMD was more evident among young children (0-3 years), and the HFMD incidence reported in industrial areas had an unexpected increase of 51.71% in 2020 autumn and winter. Results suggested that both direct and indirect NPIs should be implemented as effective public health measures to reduce infectious disease and improve surveillance strategies, and HFMD incidence in Xi'an experienced a significant rebound to the previous seasonality after a prominent decline influenced by the anti-COVID-19 NPIs.

Low-Fouling Gold Nanorod Theranostic Agents Enabled by a Sulfoxide Polymer Coating.

Gold nanorods (GNRs) are widely used in various biomedical applications such as disease imaging and therapy due to their unique plasmonic properties. To improve their bioavailability, GNRs often need to be coated with hydrophilic polymers so as to impart stealth properties. Poly(ethylene glycol) (PEG) has been long used as such a coating material for GNRs. However, there is increasing acknowledgement that the amphiphilic nature of PEG facilitates its interaction with protein molecules, leading to immune recognition and consequent side effects. This has motivated the search for new classes of low-fouling polymers with high hydrophilicity as alternative low-fouling surface coating materials for GNRs. Herein, we report the synthesis, characterization, and application of GNRs coated with highly hydrophilic sulfoxide-containing polymers. We investigated the effect of the sulfoxide polymer coating on the cellular uptake and in vivo circulation time of the GNRs and compared these properties with pegylated GNR counterparts. The photothermal effect and photoacoustic imaging of these polymer-coated GNRs were also explored, and the results show that these GNRs are promising as nanotheranostic particles for the treatment of cancer.

Dopamine Functionalized Polyethylene Glycol for Improving Stability of Gold Nanoparticles against Reactive Oxygen Species in Serum.

PEGylation is the most effective antifouling method for the surface modification of gold nanoparticles (AuNPs). However, thiol-terminated polyethylene glycol (PEG) ligands tethered on the AuNPs are instable in serum and can detach from the AuNP surface, resulting in a significant reduce of their antifouling properties. Herein, it is reported that reactive oxygen species (ROS) is a major factor causing the detachment of PEG ligands from AuNP surfaces. By covalently backfilling dopamine-functionalized PEG on the AuNPs, the stability of PEG ligands on AuNP surface and the antifouling ability of AuNPs can be effectively improved. Tuning the balance between ROS and dopamine-functionalized PEG can be used as a new strategy to control the self-assembly of AuNPs and serum proteins.

Green Polymer Electrolytes Based on Polycaprolactones for Solid-State High-Voltage Lithium Metal Batteries.

Solid polymer electrolytes (SPEs) have attracted considerable attention for high energy solid-state lithium metal batteries (LMBs). In this work, potentially ecofriendly, solid-state poly(ε-caprolactone) (PCL)-based star polymer electrolytes with cross-linked structures (xBt-PCL) are introduced that robustly cycle against LiNi0.6 Mn0.2 Co0.2 O2 (NMC622) composite cathodes, affording long-term stability even at higher current densities. Their superior features allow for sufficient suppression of dendritic lithium deposits, as monitored by 7 Li solid-state NMR. Advantageous electrolyte|electrode interfacial properties derived from cathode impregnation with 1.5 wt% PCL enable decent cell performance until up to 500 cycles at rates of 1C (60 °C), illustrating the high potential of PCL-based SPEs for application in high-voltage LMBs.

Oxidative Elimination and Reductive Addition of Thiol-Terminated Polymer Ligands to Metal Nanoparticles.

Metal nanoparticles (NPs) stabilized with thiol- (HS-) terminated polymers have applications in medicine, optoelectronics, and catalysis. It is assumed that upon exposure to oxidants or even air, these NPs lose colloidal stability, due to the oxidation of the HS-end-group and elimination of polymer ligands from the NP surface, however, this mechanism does not explain the unsuccessful recovery of the NP stability by adding fresh HS-terminated polymers. Here we propose the oxidation of the surface metal atoms as a mechanism for the oxidative elimination of polymer from the NP surface. Based on this mechanism, we reversed NP aggregation by reducing the oxidized metal surface and re-attaching HS-terminated polymer ligands. This mechanism is general for various metal NPs and different HS-terminated polymers. We show that oxidative elimination and reductive addition reactions can improve the colloidal stability of polymer-capped metal NPs and control their redox stimuli-responsive self-assembly.

First report of root rot of Polygonatum odoratum caused by Fusarium acuminatum in China.

Polygonatum odoratum (Mill.) Druce is used in traditional Chinese medicine and also consumed as a vegetable. In July of 2020, a root rot was observed on P. odoratum in a commercial field located in Benxi city (41º23'32" N, 124º04'27" E), Liaoning province of China. About 35% diseased plants in the field exhibited poor vigor, were stunted, and had yellow or brown leaves. Affected plants wilted and died. Roots of the plants were poorly developed, had brown lesions, and later rotted. To determine the causal agent, symptomatic roots with typical lesions were cut into small pieces, surface sterilized in 2% sodium hypochlorite (NaOCl) for 3 min, rinsed three times in sterile water, and plated onto PDA medium. After 5 days of incubation at 26°C, whitish-pink to red colonies growing from the root samples were observed and transferred to carnation leaf agar (CLA). Ten single conidia isolates obtained from the colonies on CLA were incubated at 26°C for 10 days. Abundant macroconidia were formed in sporodochia on CLA. Macroconidia were falcate, slender, distinctively curved in the bottom half of the apical cell, had 3 to 5 septa, and 33.1 - 46.3 × 5.0 - 7.2 µm (n=50). Chlamydospores formed in chains or single, measuring 13.8 to 14.5 µm in diameter. Microconidia were not observed on CLA. Morphologically, the isolates were identified as Fusarium acuminatum (Leslie and Summerell, 2006). To confirm the species identity, the partial translation elongation factor 1 alpha (TEF1-α) gene and rDNA internal transcribed spacer (ITS) region of isolate YZ5-2 were amplified and sequenced (O'Donnell et al. 2015; White et al.1990). BLASTn analysis of both TEF sequence (MW423623) and ITS sequence (MW423626), revealed 100% (696/692 bp) and 99.64% (563/602 bp) sequence identity with F. acuminatum LC546967 and MF509746, respectively. Pathogenicity tests were carried out in the greenhouse. A conidial suspension (2 × 106 conidia per ml) of the isolate YZ5-2 was prepared from 7-day-old cultures grown in potato dextrose broth (PDB) o n a shaker (140 rpm) at 26±1°C. Five 12-liter pots were filled with sterilized field soil and each pot was drenched with 300ml of conidial suspension. Five control pots with sterilized field soil and 300 ml PDB were also included. Roots of 20 healthy P. odoratum plants were surface disinfected in 2% NaOCl for 3 min, and rinsed with sterilized water. Prior to planting, 2-3 pinholes (1.5× 1.0 mm) were made using a toothpick on the root surface of each plant, and they were then planted in each pot (2 plants per pot). All ten pots were maintained in a greenhouse at 22-26°C for 40 days. Plants grown in the pots inoculated with the conidial suspension were stunted, had yellowed leaves and were wilted. The roots of the affected plants were rotted. Disease symptoms were similar to those observed in field. Non-inoculated control plants had no symptoms. F. acuminatum was reisolated from inoculated plants and was identical to the original isolate. The experiment was repeated twice with similar results. To our knowledge, this is the first report of root rot of P. odoratum caused by F. acuminatum in China. The disease has since been observed on P. odoratum in fields in Liaoyang and Qingyuan city in Liaoning Province of China, and it has become an important threat to P. odoratum production in China.

Confined Microenvironments from Thermoresponsive Dendronized Polymers.

Confined microenvironments in biomacromolecules arising from molecular crowding account for their well-defined biofunctions and bioactivities. To mimick this, synthetic polymers to form confined structures or microenvironments are of key scientific value, which have received significant attention recently. To create synthetic confined microenvironments, molecular crowding effects and topological cooperative effects have been applied successfully, and the key is balance between self-association of structural units and self-repulsion from crowding-induced steric hindrance. In this article, formation of confined microenvironments from stimuli-responsive dendronized polymers carrying densely dendritic oligoethylene glycols (OEGs) moieties in their pendants is presented. These wormlike thick macromolecules exhibit characteristic thermoresponsive properties, which can provide constrained microenvironments to encapsulate effectively guest molecules including dyes, proteins, or nucleic acids to prevent their protonation or biodegradation. This efficient shielding effect can also mediate chemical reactions in aqueous phase, and even enhance chirality transferring efficiency. All of these can be switched off simply through the thermally-induced dehydration and collapse of OEG dendrons due to the amphiphilicity of OEG chains. Furthermore, the switchable encapsulation and release of guests can be greatly enhanced when these dendronized polymers are used as major constituents for fabricating bulk hydrogels or nanogels, which provide a higher-level confinement.

A Combination of Chitosan, Cellulose, and Seaweed Polysaccharide Inhibits Postoperative Intra-abdominal Adhesion in Rats.

Intra-abdominal adhesion is a common complication after laparotomy. Conventional therapeutic strategies still cannot safely and effectively prevent this disorder. In this study, a combination of chitosan, cellulose, and seaweed polysaccharide (thereafter referred as CCS) was developed to significantly alleviate the formation of postoperative adhesion in rats with abdominal trauma. Transforming growth factor ß1 (TGF-ß1, an important promoter of fibrosis) and its downstream factors-namely, alpha-smooth muscle actin and plasminogen activator inhibitor-1 (PAI-1)-were effectively suppressed by CCS in vivo, and as a result, the activation of tissue plasminogen activator (tPA, may generate plasmin that is a fibrinolytic factor capable of breaking down fibrin) was significantly promoted, presenting antifibrosis effects of CCS. In addition, the activity of kinases [e.g., transforming growth factor-activated kinase 1 (TAK1), c-Jun N-terminal kinase (JNK)/Stress-activated Protein Kinase (SAPK), and p38] in the mitogen-activated protein kinase (MAPK) inflammation signaling pathway was also significantly suppressed by CCS in vivo, demonstrating anti-inflammatory functions of CCS. The histologic studies further confirmed the role of CCS in the inhibition of fibrosis, collagen deposition, inflammation, and vascular proliferation. These results indicate the clinical potential of CCS in the treatment of postoperative intra-abdominal adhesion. CCS may induce both antifibrosis and anti-inflammatory effects, potentially inhibiting the postoperative intra-abdominal adhesion. For antifibrosis effects, the expression of PAI-1 (a key factor for the adhesion formation) can be regulated by different TGF-ß1-associated signaling pathways, such as the Smads/p53 pathway, metalloproteinase/tissue inhibitor of matrix metalloproteinases pathway, Mitogen-activated Extracellular signal-regulated Kinase (MEK)/extracellular regulated protein kinase (ERK) pathway, and Yes-associated protein/transcriptional coactivator with PDZ-binding motif pathway. Following the downregulation of PAI-1 achieved by CCS, the activation of tPA (which may generate plasmin that is a fibrinolytic factor capable of breaking down fibrin) is significantly promoted. For anti-inflammation effects, CCS may suppress the phosphorylation of classic kinases (e.g., TAK1, JNK, and p38) in the MAPK signaling pathway. In addition to the MAPK pathway, inflammatory pathways, such as Nuclear Factor-κ-gene Binding(NF-κB), MEK/ERK, and Ras homologue protein/Rho associated coiled coil forming protein, are associated with the formation of intra-abdominal adhesion. Therefore, the prevention mechanisms of CCS will be further investigated in the future, with a hope of fully understanding of antiadhesion effects.

Direct energy transfer from the major antenna to the photosystem II core complexes in the absence of minor antennae in liposomes.

Minor antennae of photosystem (PS) II, located between the PSII core complex and the major antenna (LHCII), are important components for the structural and functional integrity of PSII supercomplexes. In order to study the functional significance of minor antennae in the energetic coupling between LHCII and the PSII core, characteristics of PSII-LHCII proteoliposomes, with or without minor antennae, were investigated. Two types of PSII preparations containing different antenna compositions were isolated from pea: 1) the PSII preparation composed of the PSII core complex, all of the minor antennae, and a small amount of major antennae (MCC); and 2) the purified PSII dimeric core complexes without periphery antenna (CC). They were incorporated, together with LHCII, into liposomes composed of thylakoid membrane lipids. The spectroscopic and functional characteristics were measured. 77K fluorescence emission spectra revealed an increased spectral weight of fluorescence from PSII reaction center in the CC-LHCII proteoliposomes, implying energetic coupling between LHCII and CC in the proteoliposomes lacking minor antennae. This result was further confirmed by chlorophyll a fluorescence induction kinetics. The incorporation of LHCII together with CC markedly increased the antenna cross-section of the PSII core complex. The 2,6-dichlorophenolindophenol photoreduction measurement implied that the lack of minor antennae in PSII supercomplexes did not block the energy transfer from LHCII to the PSII core complex. In conclusion, it is possible, in liposomes, that LHCII transfer energy directly to the PSII core complex, in the absence of minor antennae.

Simultaneous refolding of denatured PsbS and reconstitution with LHCII into liposomes of thylakoid lipids.

The thylakoid membrane protein PsbS is critical for quenching excessive excitation energy in mechanisms that involve the light-harvesting complexes of photosystem II. Liposomes of thylakoid lipids have been shown to be a very good platform to study photosynthetic membrane proteins and their interactions. In this study, we simultaneously refolded and reconstituted functional pea PsbS into liposomes of thylakoid lipids starting from denatured expressed protein. Intrinsic fluorescence spectroscopy, trypsin digestion, and circular dichroism spectroscopy were used to characterize the native state of PsbS in the proteoliposomes. The functionality of refolded PsbS was further demonstrated by its effect on the fluorescence quenching of the major antenna system of photosystem II (LHCII) co-inserted into the liposomes. The fluorescence yield of native trimeric LHCII was lowered by PsbS by 50% at neutral pH and by a further 25% upon lowering the pH to 4.5. Furthermore, the acid-induced fluorescence reduction was completely reversed by addition of N,N'-dicyclohexylcarbodiimide, an inhibitor of protein protonation. These results indicate that reconstituted PsbS induces strong quenching of LHCII sensing changes in local pH via its protonation sites.

Synthesis of Copolymers by Living Carbanionic Alternating Copolymerization.

The synthesis and characterization of copolymers from styrene and 1,3-pentadiene (two isomers) are reported. Styrene/1,3-pentadiene (1:1) copolymerization with carbanion initiator yield living, well-defined, alternating (r1 = 0.037, r2 = 0.056), and highly stereoregular copolymers with 90%-100% trans-1,4 units, designed Mn s and low ÐM s (1.07-1.17). The first-order kinetic resolution and NMR spectra demonstrate that the copolymers obtained possess strictly alternating structure containing both 1,4- and 4,1-enchaiments. Also a series of copolymers with varying degrees of alternation are synthesized from para-alkyl substituted styrene derivatives and 1,3-pentadiene. The degree of alternation is strongly dependent on the polarity of solvent, reaction temperature, type of trans-cis isomer of 1,3-pentadiene and para-substituted group in styrene. The macro zwitterion forms (SPC) through the distribution of electronic charges from the donor (1,3-pentadiene) to the acceptor (styrenes) are proposed to interpret the carbanion alternating copolymerization mechanism. Owing to the versatility of the carbanion-initiating reaction, the present alternating strategy based on 1,3-pentadiene (especially cis isomer) can serve as a powerful tool for precise control of polymer chain microstructure, architecture, and functionalities in one-pot polymerization.

Atrazine molecular imprinted polymers: comparative analysis by far-infrared and ultraviolet induced polymerization.

Atrazine molecular imprinted polymers (MIPs) were comparatively synthesized using identical polymer formulation by far-infrared (FIR) radiation and ultraviolet (UV)-induced polymerization, respectively. Equilibrium binding experiments were carried out with the prepared MIPs; the results showed that MIP(uv) possessed specific binding to atrazine compared with their MIP(FIR) radiation counterparts. Scatchard plot's of both MIPs indicated that the affinities of the binding sites in MIPs are heterogeneous and can be approximated by two dissociation-constants corresponding to the high- and low-affinity binding sites. Moreover, several common pesticides including atrazine, cyromazine, metamitron, simazine, ametryn, terbutryn were tested to determine their specificity, similar imprinting factor (IF) and different selectivity index (SI) for both MIPs. Physical characterization of the polymers revealed that the different polymerization methods led to slight differences in polymer structures and performance by scanning electron microscope (SEM), Fourier transform infrared absorption (FT-IR), and mercury analyzer (MA). Finally, both MIPs were used as selective sorbents for solid phase extraction (SPE) of atrazine from lake water, followed by high performance liquid chromatography (HPLC) analysis. Compared with commercial C18 SPE sorbent (86.4%-94.8%), higher recoveries of atrazine in spiked lake water were obtained in the range of 90.1%-97.1% and 94.4%-101.9%, for both MIPs, respectively.

Copolymerization of metal nanoparticles: a route to colloidal plasmonic copolymers.

The resemblance between colloidal and molecular polymerization reactions is very useful in fundamental studies of polymerization reactions, as well as in the development of new nanoscale systems with desired properties. Future applications of colloidal polymers will require nanoparticle ensembles with a high degree of complexity that can be realized by hetero-assembly of NPs with different dimensions, shapes, and compositions. A method has been developed to apply strategies from molecular copolymerization to the co-assembly of gold nanorods with different dimensions into random and block copolymer structures (plasmonic copolymers). The approach was extended to the co-assembly of random copolymers of gold and palladium nanorods. A kinetic model validated and further expanded the kinetic theories developed for molecular copolymerization reactions.

An injectable hydrogel dressing for controlled release of hydrogen sulfide pleiotropically mediates the wound microenvironment.

The healing of scalded wounds faces many challenges such as chronic inflammation, oxidative stress, wound infection, and difficulties in vascular and nerve regeneration. Treating a single problem cannot effectively coordinate the complex regenerative microenvironment of scalded wounds, limiting the healing and functional recovery of the skin. Therefore, there is a need to develop a multi-effect treatment plan that can adaptively address the issues at each stage of wound healing. In this study, we propose a scheme for on-demand release of hydrogen sulfide (H2S) based on the concentration of reactive oxygen species (ROS) in the wound microenvironment. This is achieved by encapsulating peroxythiocarbamate (PTCM) in the ROS-responsive polymer poly(ethylene glycol)-poly(L-methionine) (PMet) to form nanoparticles, which are loaded into a thermosensitive injectable hydrogel, F127-poly(L-aspartic acid-N-hydroxysuccinimide) (F127-P(Asp-NHS)), to create a scald dressing. The H2S released by the hydrogel dressing on demand regulates the wound microenvironment by alleviating infection, reducing oxidative stress, and remodeling inflammation, thereby accelerating the healing of full-thickness scalded wounds. This hydrogel dressing for the adaptive release of H2S has great potential in addressing complex scalded wounds associated with infection and chronic inflammation.

Mineralised collagen regulated the secretion of adrenomedullin by macrophages to activate the PI3K/AKT signalling pathway to promote bone defect repair.

Biomaterials can affect the osteogenic process by regulating the function of macrophages and transforming the bone immune microenvironment. Mineralised collagen (MC) is an artificial bone that is highly consistent to the microstructure of the native osseous matrix. The studies have confirmed that MC can achieve effective regeneration of bone defects, but the potential mechanism of MC regulating osteogenesis is still unclear. This study confirmed that MC regulate the high expression of adrenomedullin (ADM) in macrophages and promote the osteogenic differentiation, proliferation and migration of BMSCs. Moreover, ADM activated the PI3K/Akt pathway, while the inhibition of PI3K/Akt hindered the proliferation, migration and osteogenic differentiation of BMSCs promoted by ADM. Additionally, the rat mandibular defect model confirmed that ADM promote the repair of mandibular defects, and the inhibition of PI3K/Akt pathway hinders the osteogenic effect of ADM. Our study suggests that MC regulates ADM secretion by macrophages, creates an ideal bone immune microenvironment, activates the PI3K/AKT signalling pathway, and promotes osteogenesis.