Layered nanocomposites by shear-flow-induced alignment of nanosheets.

Biological materials, such as bones, teeth and mollusc shells, are well known for their excellent strength, modulus and toughness1-3. Such properties are attributed to the elaborate layered microstructure of inorganic reinforcing nanofillers, especially two-dimensional nanosheets or nanoplatelets, within a ductile organic matrix4-6. Inspired by these biological structures, several assembly strategies-including layer-by-layer4,7,8, casting9,10, vacuum filtration11-13 and use of magnetic fields14,15-have been used to develop layered nanocomposites. However, how to produce ultrastrong layered nanocomposites in a universal, viable and scalable manner remains an open issue. Here we present a strategy to produce nanocomposites with highly ordered layered structures using shear-flow-induced alignment of two-dimensional nanosheets at an immiscible hydrogel/oil interface. For example, nanocomposites based on nanosheets of graphene oxide and clay exhibit a tensile strength of up to 1,215 ± 80 megapascals and a Young's modulus of 198.8 ± 6.5 gigapascals, which are 9.0 and 2.8 times higher, respectively, than those of natural nacre (mother of pearl). When nanosheets of clay are used, the toughness of the resulting nanocomposite can reach 36.7 ± 3.0 megajoules per cubic metre, which is 20.4 times higher than that of natural nacre; meanwhile, the tensile strength is 1,195 ± 60 megapascals. Quantitative analysis indicates that the well aligned nanosheets form a critical interphase, and this results in the observed mechanical properties. We consider that our strategy, which could be readily extended to align a variety of two-dimensional nanofillers, could be applied to a wide range of structural composites and lead to the development of high-performance composites.

Organohydrogels with High-Speed Lubrication by Confining Polymer Chain Mobility by an Interpenetrated Heteronetwork.

Hydrogels with pure hydrophilic network have received much attention due to their excellent low frictional behavior. However, the lubrication performance of hydrogels is not satisfied under high-speed condition due to the energy dissipation caused by adsorbed polymer chains as well as the failure of lubricating mechanisms accompanied by the transition of lubrication regime. In this work, interpenetrating double-network organohydrogels were constructed by combining hydrophilic and oleophilic polymer networks to modify the physiochemical properties of surface polymer chains, especially the chain mobility. The oleophilic polymer network spatially restricting the mobility of the swollen hydrophilic network in water, resulted in a low coefficient of friction (ca. 0.01) compared with conventional hydrogels at high speed (0.1 m s-1 ). Meanwhile, the organohydrogels had superior wear resistance, with almost no wear observed on the sliding track after 5 k cycles of rubbing at high speed. The design concept of organohydrogels can be extended to a variety of low-wear, highly-lubricating materials.

An anisotropic hydrogel with electrostatic repulsion between cofacially aligned nanosheets.

Machine technology frequently puts magnetic or electrostatic repulsive forces to practical use, as in maglev trains, vehicle suspensions or non-contact bearings. In contrast, materials design overwhelmingly focuses on attractive interactions, such as in the many advanced polymer-based composites, where inorganic fillers interact with a polymer matrix to improve mechanical properties. However, articular cartilage strikingly illustrates how electrostatic repulsion can be harnessed to achieve unparalleled functional efficiency: it permits virtually frictionless mechanical motion within joints, even under high compression. Here we describe a composite hydrogel with anisotropic mechanical properties dominated by electrostatic repulsion between negatively charged unilamellar titanate nanosheets embedded within it. Crucial to the behaviour of this hydrogel is the serendipitous discovery of cofacial nanosheet alignment in aqueous colloidal dispersions subjected to a strong magnetic field, which maximizes electrostatic repulsion and thereby induces a quasi-crystalline structural ordering over macroscopic length scales and with uniformly large face-to-face nanosheet separation. We fix this transiently induced structural order by transforming the dispersion into a hydrogel using light-triggered in situ vinyl polymerization. The resultant hydrogel, containing charged inorganic structures that align cofacially in a magnetic flux, deforms easily under shear forces applied parallel to the embedded nanosheets yet resists compressive forces applied orthogonally. We anticipate that the concept of embedding anisotropic repulsive electrostatics within a composite material, inspired by articular cartilage, will open up new possibilities for developing soft materials with unusual functions.

Self-Replenishable Anti-Waxing Organogel Materials.

Solid deposition, such as the formation of ice on outdoor facilities, the deposition of scale in water reservoirs, the sedimentation of fat, oil, and grease (FOG) in sewer systems, and the precipitation of wax in petroleum pipelines, cause a serious waste of resources and irreversible environmental pollution. Inspired by fish and pitcher plants, we present a self-replenishable organogel material which shows ultra-low adhesion to solidified paraffin wax and crude oil by absorption of low-molar-mass oil from its crude-oil environment. Adhesion of wax on the organogel surface was over 500 times lower than adhesion to conventional material surfaces and the wax was found to slide off under the force of gravity. This design concept of a gel with decreased adhesion to wax and oil can be extended to deal with other solid deposition problems.

Tough, Antifreezing, and Piezoelectric Organohydrogel as a Flexible Wearable Sensor for Human-Machine Interaction.

Piezoelectric hydrogel sensors are becoming increasingly popular for wearable sensing applications due to their high sensitivity, self-powered performance, and simple preparation process. However, conventional piezoelectric hydrogels lack antifreezing properties and are thus confronted with the liability of rupture in low temperatures owing to the use of water as the dispersion medium. Herein, a kind of piezoelectric organohydrogel that integrates piezoelectricity, low-temperature tolerance, mechanical robustness, and stable electrical performance is reported by using poly(vinylidene fluoride) (PVDF), acrylonitrile (AN), acrylamide (AAm), p-styrenesulfonate (NaSS), glycerol, and zinc chloride. In detail, the dipolar interaction of the PVDF chain with the PAN chain facilitates the crystal phase transition of PVDF from the α to ß phase, which endows the organohydrogels with a high piezoelectric constant d33 of 35 pC/N. In addition, the organohydrogels are highly ductile and can withstand significant tensile and compressive forces through the synergy of the dipolar interaction and amide hydrogen bonding. Besides, by incorporating glycerol and zinc chloride, the growth of ice crystals is inhibited, allowing the organohydrogels to maintain stable flexibility and sensitivity even at -20 °C. The real-time monitoring of the pulse signal for up to 2 min indicates that the gel sensor has stable sensitivity. It is believed that our organohydrogels will have good prospects in future wearable electronics.

Imparting Functionality to the Hydrogel by Magnetic-Field-Induced Nano-assembly and Macro-response.

Hydrogels are composed of 3D hydrophilic networks with an abundance of water; they are analogous to biological soft tissues. Their unique physico-chemical properties endow hydrogels with great potential in many fields, including tissue engineering and flexible sensing. However, inadequate functionality, such as lack of rapid responsiveness, severely limits practical applications in many areas. Therefore, imparting functionality to the hydrogel is a hot research topic. The magnetic field, as an important physical field, provides a new strategy with a variety of advantages. Magnetic-field-induced ordered nano-assembly brought anisotropic properties and novel performance. Furthermore, the magnetic responsiveness of hydrogels with magnetic nanoparticles can lead to the generation of functionality under magnetic fields. Thus, we aim to systematically describe the significant effect of magnetic fields on the functionality of the hydrogel. In this review, magnetic-field-induced assembly of nanomaterials with different dimensions and resulting functional performance are introduced. The functionalities of hydrogels based on magnetic-field-induced macroscopic responses are also summarized. We believe this review will motivate more exploration of the application of magnetic fields to develop functional hydrogel materials.

Antiplatelet and thermally responsive poly(N-isopropylacrylamide) surface with nanoscale topography.

Nanoscale topography was constructed on a thermally responsive poly(N-isopropylacrylamide) (PNIPAAm) surface by grafting the polymer from silicon nanowire arrays via surface-initiated atom transfer radical polymerization. The as-prepared surface showed largely reduced platelet adhesion in vitro both below and above the lower critical solution temperature (LCST) of PNIPAAm ( approximately 32 degrees C), while a smooth PNIPAAm surface exhibited antiadhesion to platelets only below the LCST. Contact angle and adhesive force measurements on oil droplets (1,2-dichloroethane) in water demonstrated that the nanoscale topography kept a relatively high ratio of water content on the as-prepared surface and played a key role in largely reducing the adhesion of platelets; however, this effect did not exist on the smooth PNIPAAm surface. The results can be used to extend the applications of PNIPAAm in the fields of biomaterials and biomedicine under human physiological temperature and provide a new strategy for fabricating other blood-compatible materials.

Water-Repellent Properties of Superhydrophobic and Lubricant-Infused "Slippery" Surfaces: A Brief Study on the Functions and Applications.

Bioinspired water-repellent materials offer a wealth of opportunities to solve scientific and technological issues. Lotus-leaf and pitcher plants represent two types of antiwetting surfaces, i.e., superhydrophobic and lubricant-infused "slippery" surfaces. Here we investigate the functions and applications of those two types of interfacial materials. The superhydrophobic surface was fabricated on the basis of a hydrophobic fumed silica nanoparticle/poly(dimethylsiloxane) composite layer, and the lubricant-infused "slippery" surface was prepared on the basis of silicone oil infusion. The fabrication, characteristics, and functions of both substrates were studied, including the wettability, transparency, adhesive force, dynamic droplet impact, antifogging, self-cleaning ability, etc. The advantages and disadvantages of the surfaces were briefly discussed, indicating the most suitable applications of the antiwetting materials. This contribution is aimed at providing meaningful information on how to select water-repellent substrates to solve the scientific and practical issues, which can also stimulate new thinking for the development of antiwetting interfacial materials.

Anisotropically luminescent hydrogels containing magnetically-aligned MWCNTs-Eu(III) hybrids.

The anisotropic emission properties of an Eu(III)-MWCNTs-based nanocomposite PNIPAAm hydrogel is induced upon application of a 10 T magnetic field, the latter dictating the alignment of the carbon nanotubes. This structuration creates directional highways for light to be preferentially absorbed, giving rise to orientation-dependent light emission intensity. Thermal control of the transparency of the aqueous matrix also allowed a stimulus-induced switching of the materials' emission properties.

Carbyne from first principles: chain of C atoms, a nanorod or a nanorope.

We report an extensive study of the properties of carbyne using first-principles calculations. We investigate carbyne's mechanical response to tension, bending, and torsion deformations. Under tension, carbyne is about twice as stiff as the stiffest known materials and has an unrivaled specific strength of up to 7.5 × 10(7) N·m/kg, requiring a force of ∼10 nN to break a single atomic chain. Carbyne has a fairly large room-temperature persistence length of about 14 nm. Surprisingly, the torsional stiffness of carbyne can be zero but can be "switched on" by appropriate functional groups at the ends. Further, under appropriate termination, carbyne can be switched into a magnetic semiconductor state by mechanical twisting. We reconstruct the equivalent continuum elasticity representation, providing the full set of elastic moduli for carbyne, showing its extreme mechanical performance (e.g., a nominal Young's modulus of 32.7 TPa with an effective mechanical thickness of 0.772 Å). We also find an interesting coupling between strain and band gap of carbyne, which is strongly increased under tension, from 2.6 to 4.7 eV under a 10% strain. Finally, we study the performance of carbyne as a nanoscale electrical cable and estimate its chemical stability against self-aggregation, finding an activation barrier of 0.6 eV for the carbyne-carbyne cross-linking reaction and an equilibrium cross-link density for two parallel carbyne chains of 1 cross-link per 17 C atoms (2.2 nm).

Expression and purification of a functional human hepatitis B virus polymerase.

AIM: To identify a method for efficient large-scale purification of functional hepatitis B virus polymerase (HBV-Pol) without addition of cellular factors. METHODS: Full-length HBV-Pol (843 amino acids) tagged with 5' end Polyhistidine was expressed at a high level in an Escherichia coli (E. coli) system. Sodium dodecyl sulfate lysis buffer was utilized to dissolve insoluble HBV-Pol, and Ni-NTA resin affinity chromatography was utilized for HBV-Pol purification. Most recombinant HBV-Pol was eluted with 100 mmol/L imidazole in the presence of NP-40, a weak detergent that keeps HBV-Pol in solution. A reducing agent was utilized throughout the purification steps to keep soluble HBV-Pol from redundant disulfide bond formation. RESULTS: The large-scale production of functional intact human HBV-Pol was achieved in an E. coli expression system. Purified HBV-Pol showed stable reverse transcriptase activity and DNA polymerase activity. The purified protein was of high purity and had stable reverse transcriptase activity. CONCLUSION: Large-scale production of HBV-Pol in pure form should facilitate crystallization and detailed analysis of the structure and mechanism of HBV-Pol. Ability of this purification approach to obtain human HBV-Pol in an enzymatically active form should be helpful for development of drugs for treatment of chronic hepatitis B.