Quantitative Analysis of Nanoplastics in Single Cells by Subcellular Chromatography.

The accumulation and spatial distribution of intracellular nanoplastic particles provide useful information about their spatiotemporal toxicological effects mediated by the physicochemical parameters of nanoplastics in living cells. In this study, a sample injection-transfer method was designed with an accuracy of up to femtoliters to attoliters to match the volume required for ultranarrow-bore open-tubular liquid chromatography. The separation and concentration quantification of mixed polystyrenes in different regions in living cells were achieved by directly transferring picoliter/femtoliter volumes of intracellular cytoplasm to an ultranarrow-bore open-tubular chromatographic column. The measurement of pollutant concentration in different areas of a small-volume target (single cell) was realized. This method is expected to be used in the qualitative and quantitative analyses of complex, mixed, and label-free nanoplastics (a few nm in size) in the subregions of living cells.

Analysis of energy recovery and microbial community in an amalgamated CSTR-UASBs reactor for a three-stage anaerobic fermentation process of cornstalks.

In this study, a continuous stirred-tank reactor (CSTR) coupled with up-flow anaerobic sludge beds (UASBs) reactor was successfully developed for enhancing methane production and carbon recovery rate from cornstalks. Acetic acid production was higher in regions A than in B and C. The methane percentage achieved at 75.98% of total gas and methane production of cornstalks was up to 520.07 mL/g, during the stable operation period. The carbon of recovery rate, represented substrates converted to methane gas, reached 69.32% in stable stage. Microbial community structure analysis revealed that Paludibacter, Prevotella/Clostridium sensu stricto, and Caldisericum were the dominant bacteria for the degradation of cellulose, lignin, and other refractory macromolecules in regions A, B, and C, respectively. Methanobacterium and Methanolinea were the two major genera, accounting for methanogenesis generation.

Oral health knowledge, attitudes, and practices and oral health-related quality of life among stroke inpatients: a cross-sectional study.

BACKGROUND: Stroke patients have poor oral hygiene, experience oral dysfunction due to disease factors, and have impaired oral health-related quality of life (OHRQoL). This study aimed to determine the oral health knowledge, attitudes, and practices of stroke inpatients, assess the OHRQoL of these patients, and identify their correlates. METHODS: In this cross-sectional study, 281 stroke inpatients aged between 22 and 88 years (57.94 ± 10.94) were conveniently selected from three hospitals in Guangzhou, China. OHRQoL was measured among these stroke patients using a Chinese version of the Oral Health Impact Profile-14 (OHIP-14). SPSS 26.0 was used for statistical analysis. Mean scores, standard deviations, and frequency distributions were obtained. The Mann-Whitney U test, Kruskal‒Wallis H test, Spearman's correlation, and multiple linear regression were used in the analysis. RESULTS: The mean score of the patients' OHRQoL was 8.37 ± 6.67, with the highest score in the pain or discomfort of the mouth dimension (3.11 ± 2.13) and pain being the most common negative effect (13.5%). In multiple linear regression analysis, significant differences were found between patients only in age (P = 0.008), toothache (P < 0.001), self-rated oral health (P < 0.001), time since last dentist visit (P = 0.037) and reason for not having visited a dentist in the past year (P < 0.001). CONCLUSION: The OHRQoL of patients hospitalised with stroke was moderate, and oral conditions still need to be improved. Increasing age, toothache, a longer time since the last dental visit and the reason for not visiting a dentist in the past year had a negative effect on OHRQoL, and better self-rated oral health had a positive effect. Therefore, in clinical work, greater attention should be given to elderly stroke patients, patients with poor oral status and poor oral health behaviours, timely assessment of patients' swallowing function, nutritional function, and self-care ability, and early and targeted oral health interventions and guidance.

Light-triggered OVA release based on CuS@poly(lactide-co-glycolide acid) nanoparticles for synergistic photothermal-immunotherapy of tumor.

The immunotherapy played a vital role in the treatment of metastatic tumor. To further enhance the effect of the immunotherapy, the combination of photothermal effect can not only eradicate the tumor cells by hyperthermia, but also improved the antigen release in vivo to achieve enhanced immune responses. In this study, a core-shell structured nanocomplex was developed by loading of ovalbumin (OVA) and copper sulfide nanoparticles (CuS-NPs) into the poly(lactide-co-glycolide acid) nanoparticles (PLGA-NPs). The CuS-NPs exhibited favorable photothermal effect, which significantly kill the 4T1 tumor cells in vitro. The photothermal effect of the CuS-NPs accelerated the OVA release, which led to higher levels of IL-6, IL-12 and TNF-α, and activation of CD8+ T cells. Both of the OVA-PLGA-NPs and CuS-NPs with NIR light irradiation contributed inhibited primary tumor while the growth of the distant tumors was not hindered. The irradiated CuS@OVA-PLGA-NPs exhibited a minimal primary tumor because of the combined effect of photothermal therapy and immunotherapy. Moreover, the irradiated CuS@OVA-PLGA-NPs showed the most extensive distribution of CD8+ T cells in the primary and distant tumor, which blocked the rise of the distant tumor. In conclusion, the CuS@OVA-PLGA-NPs presented as a promising strategy for metastatic tumor therapy.

A paper-supported sandwich immunosensor based on upconversion luminescence resonance energy transfer for the visual and quantitative determination of a cancer biomarker in human serum.

In this paper, a paper-supported analytical device based on a sandwich immunoreaction and luminescence resonance energy transfer (LRET) was reported for the visual and quantitative determination of a cancer biomarker, in which upconversion nanoparticles (UCNPs) were located on the surface of the paper as energy donors and gold nanoparticles (AuNPs) were used as energy acceptors. Upon the recognition of the cancer biomarker by two rationally selected antibodies, the upconversion luminescence was quenched by the AuNPs in a biomarker concentration-dependent manner. As a model target, CEA was detected using this immunosensor, and a linear relationship within 0.5-30 ng mL-1 was obtained in buffer solution, with a detection limit of 0.21 ng mL-1. The immunosensor was also applicable in 20-fold diluted human serum with a linear range of 0.5-30 ng mL-1 and a detection limit of 0.36 ng mL-1. This technique also realized the qualitative judgment of the critical concentration of CEA in serum samples by the naked eye. This approach displays great application potential for point-of-care testing in clinical applications, as well as the potentiality to be extended to other kinds of disease-related biomolecules.

Poor performance of Enduron polyethylene liner in total hip arthroplasty: a minimum ten-year follow up and ultra-morphological analysis of wear particles.

PURPOSE: The aim of the present study was to investigate the long-term outcome and the wear characteristics of two distinct types of ultra-high molecular weight polyethylene (UHMWPE) liners in total hip arthroplasty (THA). METHODS: We conducted a retrospective clinical study on patients which were treated with total hip arthroplasty using either Enduron polyethylene (Enduron PE) or Trilogy polyethylene (Trilogy PE) liners based on a minimum of ten year follow up data. Morphological analyses of wear particles from tissue samples, which were harvested during revision surgeries, were also performed. RESULTS: A total of 79 THAs in the Enduron group and 55 THAs in the Trilogy group were available for analysis. Kaplan-Meier survival with revision for wear-related complications as the endpoint of the Enduron PE liners was lower than that of Trilogy PE liners at ten years (93.5 % and 100 %, P = 0.03). The Enduron group had higher mean linear wear rate than that of the Trilogy group (0.20 ± 0.09 and 0.09 ± 0.03 mm/year, P < 0.01). The incidence of osteolysis for the Enduron group was higher than that of the Trilogy group (33.3 % and 12 %, P = 0.04). Under transmission electron microscopy, the Enduron group had more than 82 % of the particles less than 1.0 µm in size and more than 57 % of the particles less than 0.5 µm. CONCLUSION: The long-term performance of Enduron liners was worse than that of Trilogy liners. Further clinical follow-up may be necessary in patients with Enduron PE liners in order to avoid catastrophic complications.

Ultrasensitive photoelectrochemical biosensing of multiple biomarkers on a single electrode by a light addressing strategy.

Ultrasensitive multiplexed detection of biomarkers on a single electrode is usually a great challenge for electrochemical sensors. Here, a light addressable photoelectrochemical sensor (LAPECS) for the sensitive detection of multiple DNA biomarkers on a single electrode was reported. The sensor was constructed through four steps: (1) immobilization of capture DNA (C-DNA) of different targets on different areas of a single large-sized gold film electrode, (2) recognition of each target DNA (T-DNA) and the corresponding biotin-labeled probe DNA (P-DNA) through hybridization, (3) reaction of the biotin-labeled probe DNA with a streptavidin-labeled all-carbon PEC bioprobe, and (4) PEC detection of multiple DNA targets one by one via a light addressing strategy. Through this principle, the LAPECS can achieve ultrasensitive detection of three DNA sequences related to hepatitis B (HBV), hepatitis C (HCV) and human immunodeficiency (HIV) viruses with a similar wide calibration range of 1.0 pM ∼ 0.01 µM and a low detection limit of 0.7 pM by using one kind of PEC bioprobe. Moreover, the detection throughput of LAPECS may be conveniently expanded by simply enlarging the size of the substrate electrode or reducing the size of the sensing arrays and the light beam. The present work thus demonstrates the promising applications of LAPECS in developing portable, sensitive, high-throughput, and cost-effective biosensing systems.

An immune sandwich assay of carcinoembryonic antigen based on the joint use of upconversion phosphors and magnetic beads.

We herein report a sensitive and selective immunosensor for carcinoembryonic antigen (CEA) based on the joint use of upconversion phosphors (UCPs) and magnetic beads (MBs). UCPs as the signal probe were designed with a core-shell structure which provided a 40-fold enhancement of the luminescence intensity. Poly(acrylic acid) (PAA)-modified UCPs were covalently conjugated with the anti-CEA antibody (coating), and streptavidin functionalized magnetic beads were combined with another biotin-tagged anti-CEA antibody. With the assistance of a magnet, the as-formed immune sandwich in the presence of CEA can be readily separated from the assay matrix. The immunosensor showed a linear dynamic range for CEA within 0.05-20 ng mL(-1) in a buffered aqueous solution, and 0.1-20 ng mL(-1) in a human serum sample. The sensor was highly specific to CEA. Our results have suggested the potential application of the UCP-MB based immunoassay for CEA in clinical analysis.

Upconversion fluorescence resonance energy transfer biosensor with aromatic polymer nanospheres as the lable-free energy acceptor.

We report a new upconversion fluorescence resonance energy transfer (UC-FRET) biosensor using poly-m-phenylenediamine (PMPD) nanospheres as the energy acceptor in this paper. A single-stranded DNA (ssDNA) tagged with a sulfydryl group at the 5'-terminus was covalently linked to poly(ethylenimine) (PEI) functionalized upconversion phosphors (UCPs, the energy donor). Because of the π-rich electronic structure of PMPD, self-assembly of the donor and the acceptor was achieved through the π-π stacking interaction between ssDNA and PMPD. The fluorescence of the donor was quenched by the acceptor in a PMPD-concentration-dependent manner. A maximum quenching degree of 90% was acquired, which was among the highest levels of all previous reports. Upon the formation of double-stranded DNA (dsDNA) between the target DNA and the probe DNA, the energy acceptor was separated from the donor due to the weakened interaction between dsDNA and PMPD. The fluorescence of UCPs was accordingly restored, and a linear response was obtained with the target concentration ranging from 0.1 to 6.0 nM. The limit of detection was calculated as 0.036 nM, which was a highly competitive sensitivity. The sensor also showed high precision, pronounced specificity, and the applicability to complicated sample matrix (human serum). The UCPs-PMPD FRET sensing platform takes advantages of both the optical merits of the upconversion donors and the superquenching ability and good water-solubility of the aromatic polymer nanoparticles. This study will open the opportunity to develop a new class of UC-FRET biosensors.

Circadian Clock Regulation via Biomaterials for Nucleus Pulposus.

Circadian clock disorder during tissue degeneration has been considered the potential pathogenesis for various chronic diseases, such as intervertebral disc degeneration (IVDD). In this study, circadian clock-regulating biomaterials (ClockMPs) that can effectively activate the intrinsic circadian clock of nucleus pulposus cells (NPCs) in IVDD and improve the physiological function of NPCs for disc regeneration are fabricated via air-microfluidic technique and the chemical cross-linking between polyvinyl alcohol and modified-phenylboronic acid. In vitro experiments verified that ClockMPs can scavenge reactive oxygen species to maintain a stable microenvironment for the circadian clock by promoting the binding of BMAL1 and CLOCK proteins. ClockMPs can regulate the expression of core circadian clock genes by activating the PI3K-AKT pathway in NPCs to remodel the intrinsic circadian clock and promote extracellular matrix synthesis. Furthermore, in vivo experiments of IVDD treated with ClockMPs proved that ClockMPs can promote disc regeneration by regulating the circadian clock of NPCs. In conclusion, ClockMPs provided a novel and promising strategy for circadian clock regulation during tissue regeneration.

Experiences of dental clinical trials management under COVID-19 in China.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is responsible for the ongoing coronavirus disease 2019 (COVID-19) pandemic. Despite progress in pandemic prevention and control, it has always been a difficult task for China to pursue a 'zero COVID-19' strategy. Given the aerosol transmission of COVID-19 and the strict nosocomial infection control in dental hospitals, the execution of clinical trials in oral, dental and craniofacial research have encountered heightened difficulties. During this wave of the pandemic, the Institute of Clinical Trials in our hospital has continuously organised experts to discuss how to improve the management of clinical trials and we have made improvements in their management with the following principles: subject protection being our priority, humanised service being our pursuit and the quality of clinical trials being the cornerstone. Here, we share our experiences and current practices in clinical trial management with our peers worldwide, aiming to promote the management of clinical trials and contribute to the development of stomatology under the constraints of COVID-19 waves.

Chitosan/silk fibroin biomimic scaffolds reinforced by cellulose acetate nanofibers for smooth muscle tissue engineering.

Reconstruction of multilayered and functional smooth muscle tissues remains a challenge nowadays. Cryogels possess great advantages in three-dimensional tissue regeneration owing to the interconnected macroporous structure, but their applications have been hindered because of limited mechanical properties. Inspired by the natural extracellular matrix, cellulose acetate electrospun nanofibers (NFs) were incorporated to chitosan/silk fibroin (CS/SF) cryogel scaffolds to address this problem in this work. Compared with pure CS/SF scaffolds, CS/SF/NFs composite scaffolds showed roughened surface and enlarged pore size (216.2 ± 65.3 µm vs. 263.1 ± 75.7 µm) allowing for cell adhesion and proliferation. Incorporation of nanofibers upgraded the mechanical properties of scaffolds with a six-fold increase in compressive modulus. The proliferation and infiltration of smooth muscle cells (SMCs) were remarkably improved with the existence of nanofibers. Besides, SMCs cultured on CS/SF/NFs scaffolds displayed higher expression of contraction-related genes, verifying their potential for smooth muscle tissue engineering.

Docetaxel-loaded pluronic p123 polymeric micelles: in vitro and in vivo evaluation.

In this work, novel docetaxel (DTX) -loaded Tween 80-free Pluronic P123 (P123) micelles with improved therapeutic effect were developed. The freeze-dried DTX-loaded P123 micelles (DTX-micelles) were analyzed by HPLC, TEM and DLS to determine the DTX loading, micelle morphology, size, respectively. The in vitro cytotoxic activity of DTX-micelles in HepG2, A549 and malignant melanoma B16 cells were evaluated by MTT assay. The corresponding in vivo antitumor efficacy was assessed in Kunming mice bearing B16 tumor after intravenous administration. The DTX-loading and efficiency into the micelles were 2.12 ± 0.09% and 86.34 ± 3.32%, respectively. The DTX-micelles were spherical with a mean particle size of 50.7 nm and size distribution from 22 to 84 nm, which suggested that they should be able to selectively accumulate in solid tumors by means of EPR effect, with a zeta potential of -12.45 ± 3.24 mV. The in vitro release behavior of DTX from DTX-micelles followed the Weibull equation. Compared with Duopafei(®), DTX-micelles showed higher cytotoxicity against HepG2 (P < 0.01), A549 (P < 0.05) and B16 (P < 0.01) cells. In addition, DTX-micelles exhibited remarkable antitumor activity and reduced toxicity on B16 tumor in vivo. The tumor inhibition rates (TIR) of DTX-micelles was 91.6% versus 76.3% of Duopafei(®) (P < 0.01). These results suggested that P123 micelles might be considered as an effective DTX delivery system.

Results of selective hip arthroplasty revision in isolated acetabular failure.

BACKGROUND: Controversy exists over whether to remove well-fixed components at the time of revision of a failed total hip arthroplasty (THA). The purpose of this study was to evaluate the results of selective acetabular revision after acetabular failure in which only the failed component was replaced. MATERIALS AND METHODS: Thirty-six isolated acetabular component revisions were performed and prospectively followed for a mean of 4.7 y (range, 2-9.3 y). The components had been in place for a mean of 10.8 y. All femoral components and some metal-backed acetabular shells were well fixed at the time of revision and left in place. Surgery involved cementation of an acetabular liner into a well-fixed acetabular shell in 16 cases, and acetabular revision in 20 cases. Morselized cancellous allograft was used to fill acetabular defects in 27 hips, and proximal femoral defects in 17 hips. Bulk allografts were used to reconstruct the proximal femur in two hips. RESULTS: The mean Harris hip score improved from 57.8 preoperatively to 89.1 at the final follow-up visit. The results were rated excellent in 24 patients, good in nine patients, and fair in three patients. The unrevised femoral components and acetabular shells remained well fixed, and final follow-up radiographs revealed no cases of osteolytic lesion progression around the femoral and acetabular components. CONCLUSIONS: Revision of only the failed acetabular component is recommended in cases of isolated acetabular failure, providing excellent results over the medium term, and allowing preservation of bone stock with lower surgical morbidity.

Biotinylated and fluorophore-incorporated polymeric mixed micelles for tumor cell-specific turn-on fluorescence imaging of Al3.

Excessive amounts of Al3+ in the human body can cause adverse effects on immune function and induce several neurodegenerative disorders. So far, most of the reported fluorescent probes for Al3+ present some common drawbacks, such as low sensitivity and poor water solubility. In addition, a number of traditional fluorescent probes failed to image Al3+ in tumor cells due to the lack of tumor cell targeting capacity and cell penetrating abilities. To overcome these shortcomings, we constructed tumor-targeting fluorescent mixed nano-micelles (mPEG-Dye-Biotin) with an average particle size of 21 nm from an amphiphilic polymer containing a Schiff-base fluorescent unit (mPEG-Dye) and another amphiphilic polymer containing a tumor cell recognition ligand (DSPE-PEG-Biotin), through the co-self-assembly of both amphiphilic polymers in water using the film rehydration method. The as-prepared nanoprobe showed a highly sensitive and selective turn-on fluorescence response to Al3+ in aqueous solution with a low detection limit. MTT assay revealed the negligible cytotoxicity of the mPEG-Dye-Biotin nanoprobe to both HeLa cells and COS-7 cells, indicating the safety of mPEG-Dye-Biotin for biological applications. More importantly, the biotinylated nanoprobe showed better ability to enter biotin receptor-positive HeLa cells than that of the non-biotinylated micelle mPEG-Dye, which made it more suitable for imaging Al3+ in biotin receptor-positive tumor cells. This work provides a simple and general strategy to design a highly sensitive and tumor cell-specific metal ion nanoprobe, which can not only be applied in Al3+ imaging, but can also be extended to other ions or biomolecules by changing the incorporated fluorescent unit in the amphiphilic polymer.

Membrane binding of the insertion sequence of Proteus vulgaris L-amino acid deaminase stabilizes protein structure and increases catalytic activity.

Proteus vulgaris L-amino acid deaminase (pvLAAD) belongs to a class of bacterial membrane-bound LAADs mainly express in genus Proteus, Providencia and Morganella. These LAADs employ a non-cleavable N-terminal twin-arginine translocation (Tat) peptide to transport across membrane and bind to bacterial surface. Recent studies revealed that a hydrophobic insertion sequence (INS) in these LAADs also interacts with bacterial membrane. However, the functional significance of INS-membrane interaction is not clear. In this study, we made site-directed mutagenesis on the surface-exposed hydrophobic residues of pvLAAD INS, and we found that these mutations impaired the INS-membrane interaction but did not affect pvLAAD activity in the solution. We further found that when cell membrane is present, the catalytic activity can be increased by 8~10 folds for wild-type but not INS-mutated pvLAAD, indicating that the INS-membrane interaction is necessary for increasing activity of pvLAAD. Molecular dynamic (MD) simulations suggested that INS is flexible in the solution, and its conformational dynamics could lead to substrate channel distortion. Circular dichroism (CD) spectroscopy experiments indicated that bacterial membrane was able to maintain the conformation of INS. Our study suggests the function of the membrane binding of INS is to stabilize pvLAAD structure and increase its catalytic activity.

Asparaginase-associated concurrence of hyperlipidemia, hyperglobulinemia, and thrombocytosis was successfully treated by centrifuge/membrane hybrid double-filtration plasmapheresis.

Asparaginase-associated concurrence of hyperlipidemia, hyperglobulinemia, and thrombocytosis is a rare complication requiring aggressive lipoprotein apheresis, but no one of currently available lipoprotein apheresis methods can simultaneously resolve the 3 abnormalities. Herein, we reported a construction of double-filtration plasmapheresis (DFPP) using a combination of centrifugal/membranous plasma separation techniques to successfully treat a patient with hyperlipidemia, hyperglobulinemia, and thrombocytosis. A male presented with severe hyperlipidemia, hyperglobulinemia, and thrombocytosis during asparaginase treatment for NK/T-cell lymphoblastic lymphoma and was scheduled to receive lipoprotein apheresis. To simultaneously remove lipoproteins, immunoglobulin, and deplete platelets from blood, a centrifuge/membrane hybrid DFPP was constructed as following steps: plasma and part of platelets were separated first from whole blood by centrifugal technique and then divided by a fraction plasma separator into 2 parts: platelets and plasma components with large size, which were discarded; and those containing albumin, which were returned to blood with a supplement of extrinsic albumin solution. DFPP lasted 240 minutes uneventfully, processing 5450-mL plasma. The concentrations of plasma components before DFPP were as follows: triglycerides 38.22 mmol/L, total cholesterols 22.98 mmol/L, immunoglobulin A (IgA) 15.7 g/L, IgG 12.7 g/L, and IgM 14.3 g/L; whereas after treatment were 5.69 mmol/L, 2.38 mmol/L, 2.5 g/L, 7.7 g/L, and 0.4 g/L, respectively. The respective reduction ratio was 85.1%, 89.6%, 83.9%, 39.4%, and 96.9%. Platelet count decreased by 40.4% (from 612 × 10(9)/L to 365 × 10(9)/L). Centrifuge/membrane hybrid DFPP can simultaneously remove lipoproteins, immunoglobulin, and deplete platelets, with a success in treatment of asparaginase treatment-induced hyperlipidemia, hyperglobulinemia, and thrombocytosis, and may be useful for patients requiring DFPP but with particular situations.

Computer-assisted designed "selenoxy-chinolin": a new catalytic mechanism of the GPx-like cycle and inhibition of metal-free and metal-associated Aß aggregation.

Using support from rational computer-assisted design, a novel series of hybrids (selenoxy-chinolin) designed by fusing the metal-chelating agent CQ and the antioxidant ebselen were synthesized and evaluated as multitarget-directed ligands. Most of the hybrids demonstrated significant ability to mimic GPx, which is highly consistent with the prediction results of DFT studies for the selenenyl sulfide intermediates in the computational design. Using (77)Se, (1)H and (13)C NMR spectroscopy and high-resolution mass spectroscopy (HRMS), a novel catalytic mechanism, including a new selenium quinone active species, was first demonstrated. 2D NMR studies indicated that the typical hybrid has an effective interaction with Aß. In addition, the optimal compound 12k was found to possess an excellent ability to scavenge peroxide and to inhibit self- and metal-induced Aß aggregation, and an ability to disassemble preformed self- and metal-induced Aß aggregates effectively. Furthermore, 12k was able to penetrate the central nervous system (CNS) and did not exhibit any acute toxicity in mice at doses up to 2000 mg kg(-1). Overall, we demonstrated that hybrid 12k, through rational structure-based computational design, shows a potential for development as a therapeutic agent in AD.

Preclinical studies of N3-O-toluyl-fluorouracil-loaded lipid-based nanosuspensions in H22-bearing mice.

PURPOSE: N3-O-toluyl-fluorouracil (TFU) is a potential antitumor prodrug of 5-fluorouracil (5-FU), but its poor solubility has limited its use in clinic. This study aimed to improve the bioavailability of TFU by preparing TFU-loaded lipid-based nanosuspensions (TFU-LNS) and perform a preclinical evaluation. METHODS: TFU-LNS were prepared through high-pressure homogenization and were lyophilized afterwards. For in vitro test, the physicochemical properties and cytotoxicity against HegG2 cells were conducted. For in vivo evaluation, the pharmacokinetics, tissue distribution, and antitumor efficacy were investigated in H22-bearing Kunming mice. RESULTS: TFU showed different degradability in four media; in particular, nearly all of it converted to an equimolar amount of 5-FU in blank plasma of Wistar rats. The lyophilized TFU-LNS had a mean particle size of 180.03±3.11 nm and zeta potential of -8.02±1.43 mV and showed no discernible changes after storage at 4°C for 3 months. In the in vivo antitumor study, the antitumor efficacy of TFU-LNS was consistent with that of 5-FU injection. Furthermore, TFU-LNS released a lower concentration of 5-FU in heart and kidney throughout the tissue distribution studies. CONCLUSION: TFU-LNS exhibited convincing antitumor activity and easy scale-up opportunity, which suggests that TFU-LNS might be a promising drug delivery system for cancer therapy.

Pluronic P123-docetaxel conjugate micelles: synthesis, characterization, and antitumor activity.

The purpose of this research is to develop and evaluate Pluronic P123 (P123)-docetaxel (DTX) conjugate that could form core-shell-type micelles in aqueous solution. DTX was covalently conjugated to P123 via ester bond after the activation of DTX by succinic anhydride. The structure of P123-DTX conjugate was confirmed by 1H-NMR. The self-assembly behavior of the P123-DTX conjugate in aqueous solution was characterized by the measurement of critical micelle concentration (CMC). The CMC of P123-DTX conjugate was (1.34 +/- 0.05) x 10(-5) mol/L, which was lower than that of P123 ((1.91 +/- 0.07) x 10(-5) mol/L). The DTX content in the conjugate could reach 13.69% (wt.%). TEM and DLS analysis showed that the conjugate formed approximately spherical micelles with mean particle size of 85.3 +/- 1.59 nm. In vitro release of DTX from the conjugate micelles showed pH dependence, being faster at lower pH value than that at pH 7.4. In vitro cytotoxicity of P123-DTX conjugate micelles was evaluated by MTT method against HepG2, MCF-7 and B16 cell lines and the result indicated that P123-DTX conjugate micelles showed lower cytotoxicity than the DTX injection-Duopafei. Compared with Duopafei, in vivo antitumor activity of P123-DTX conjugate micelles in Kunming mice bearing B16 tumor was more effective and less toxic. These results indicated that the P123-DTX conjugate micelles prepared in this study may be considered as an alternative and promising DTX delivery system.