Multivalent Phthalocyanine-Based Cationic Polymers with Enhanced Photodynamic Activity for the Bacterial Capture and Bacteria-Infected Wound Healing.

The solubility and photosensitive activity of phthalocyanine are crucial to photodynamic antibacterial performance. However, highly conjugated phthalocyanine with high singlet oxygen generation efficiency tends to aggregate in aqueous environments, leading to poor solubility and photodynamic antibacterial activity. Herein, we propose a novel photodynamic antibacterial therapeutic platform by a phthalocyanine-based polymeric photosensitizer for the efficient healing of a bacteria-infected wound. A prepared phthalocyanine-based chain-transfer agent and a tertiary amino group-containing monomer are applied in the reversible addition-fragmentation chain-transfer polymerization for the preparation of the polymeric photosensitizer, which is subsequently quaternized to obtain a positively charged surface. This water-soluble phthalocyanine-based polymer can strongly concentrate on bacterial membranes via electrostatic interaction. The formed singlet oxygen by the phthalocyanine-based polymer after 680 nm light irradiation plays an essential role in killing the Gram-positive and Gram-negative bacteria. The study of antibacterial action indicates that this nanocomposite can cause irreversible damage to the bacterial membranes, which can cause cytoplasm leakage and bacterial death. Moreover, this therapeutic platform has excellent biocompatibility and the capacity to heal the wounds of bacterial infections. Experimental results indicate that the design strategy of this phthalocyanine-based polymer can extend the application of the hydrophobic photosensitizer in the biomedical field.

ß-Cyclodextrin-Based Supramolecular Imprinted Fiber Array for Highly Selective Detection of Parabens.

A novel high-throughput array analytical platform based on derived ß-cyclodextrin supramolecular imprinted polymer (SMIP) fibers was constructed to achieve selective enrichment and removal of parabens. SMIP fiber arrays have abundant imprinting sites and introduce the host−guest inclusion effect of the derived ß-cyclodextrin, which is beneficial to significantly improve the adsorption ability of fiber for parabens. Upon combination with HPLC, a specific and sensitive recognition method was developed with a low limit of detection (0.003−0.02 µg/L, S/N = 3) for parabens analysis in environmental water. This method has a good linearity (R > 0.9994) in the linear range of 0.01−200 µg/L. The proposed SMIP fiber array with high-throughput adsorption capacity has great potential in monitoring water pollution, which also provides a reliable reference for the analysis of more categories of pharmaceutical and personal care product pollutants.

Identification of two novel pathogenic variants of PIBF1 by whole exome sequencing in a 2-year-old boy with Joubert syndrome.

BACKGROUND: Joubert syndrome (OMIM 213300) is an autosomal recessive disorder with gene heterogeneity. Causal genes and their variants have been identified by sequencing or other technologies for Joubert syndrome subtypes. CASE PRESENTATION: A two-year-old boy was diagnosed with Joubert syndrome by global development delay and molar tooth sign of mid-brain. Whole exome sequencing was performed to detect the causative gene variants in this individual, and the candidate pathogenic variants were verified by Sanger sequencing. We identified two pathogenic variants (NM_006346.2: c.1147delC and c.1054A > G) of PIBF1 in this Joubert syndrome individual, which is consistent with the mode of autosomal recessive inheritance. CONCLUSION: In this study, we identified two novel pathogenic variants in PIBF1 in a Joubert syndrome individual using whole exome sequencing, thereby expanding the PIBF1 pathogenic variant spectrum of Joubert syndrome.

Synthesis of folic acid functionalized gold nanoclusters for targeting folate receptor-positive cells.

We report on the synthesis of water-soluble gold nanoclusters capped with polyethylene glycol (PEG)-based ligands and further functionalized with folic acid for specific cellular uptake. The dihydrolipoic acid-PEG-based ligands terminated with -OMe, -NH2 and -COOH functional groups are produced and used for surface passivation of Au nanoclusters (NCs) with diameters <2 nm. The produced sub 2 nm Au NCs possess long-shelf life and are stable in physiologically relevant environments (temperature and pH), are paramagnetic and biocompatible. The paramagnetism of Au NCs in solution is also reported. The functional groups on the capping ligands are used for direct conjugation of targeting molecules onto Au NCs without the need for post synthesis modification. Folic acid (FA) is attached via an amide group and effectively target cells expressing the folate receptor. The combination of targeting ability, biocompatibility and paramagnetism in FA-functionalized Au NCs is of relevance for their exploitation in nanomedicine for targeted imaging.

RGD Peptides-Conjugated Pluronic Triblock Copolymers Encapsulated with AP-2α Expression Plasmid for Targeting Gastric Cancer Therapy in Vitro and in Vivo.

Gastric cancer, a high-risk malignancy, is a genetic disease developing from a cooperation of multiple gene mutations and a multistep process. Gene therapy is a novel treatment method for treating gastric cancer. Here, we developed a novel Arg-Gly-Asp (RGD) peptides conjugated copolymers nanoparticles-based gene delivery system in order to actively targeting inhibit the growth of gastric cancer cells. These transcription factor (AP-2α) expression plasmids were also encapsulated into pluronic triblock copolymers nanoparticles which was constituted of poly(ethylene glycol)-block-poly(propylene glycol)- block-poly(ethylene glycol) (PEO-block-PPO-block-PEO, P123). The size, morphology and composition of prepared nanocomposites were further characterized by nuclear magnetic resonance (NMR), transmission electron microscopy (TEM) and dynamic light scattering (DLS). In MTT (3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyltetrazolium bromide) analysis, these nanocomposites have minor effects on the proliferation of GES-1 cells but significantly decreased the viability of MGC-803, suggesting they own low cytotoxicity but good antitumor activity. The following in vivo evaluation experiments confirmed that these nanocomposites could prevent the growth of gastric cancer cells in the tumor xenograft mice model. In conclusion, these unique RGD peptides conjugated P123 encapsulated AP-2α nanocomposites could selectively and continually kill gastric cancer cells by over-expression of AP-2α in vitro and in vivo; this exhibits huge promising applications in clinical gastric cancer therapy.

Engineering of dual recognition functional aptamer-molecularly imprinted polymeric solid-phase microextraction for detecting of 17ß-estradiol in meat samples.

In this study, an enhanced selective recognition strategy was employed to construct a novel solid-phase microextraction fiber coating for the detection of 17ß-estradiol, characterized by the combination of aptamer biorecognition and molecularly imprinted polymer recognition. Benefiting from the combination of molecularly imprinted and aptamer, aptamer-molecularly imprinted (Apt-MIP) fiber coating had synergistic recognition effect. The effects of pH, ion concentration, extraction time, desorption time and desorption solvent on the adsorption capacity of Apt-MIP were investigated. The adsorption of 17ß-estradiol on Apt-MIP followed pseudo-second order kinetic model, and the Freundlich isotherm. The process was exothermic and thermodynamically spontaneous. Compared with polymers that only rely on imprinted recognition, non-imprinted recognition or aptamer affinity, Apt-MIP had the best recognition performance, which was 1.30-2.20 times that of these three materials. Furthermore, the adsorption capacity of Apt-MIP for 17ß-estradiol was 885.36-1487.52 times than that of polyacrylate and polydimethylsiloxane/divinylbenzone commercial fiber coatings. Apt-MIP fiber coating had good stability and could be reused for more than 15 times. Apt-MIP solid-phase microextraction coupled with high-performance liquid chromatography was successfully applied to the determination of 17ß-estradiol in pork, chicken, fish and shrimp samples, with satisfactory recoveries of 79.61 %-105.70 % and low limits of detection (0.03 µg/kg). This work provides new perspectives and strategies for sample pretreatment techniques based on molecular imprinting technology and improves analytical performance.

Magnetic hypercrosslinked polymer microspheres for the detection, spatial distribution, source identification and potential risks assessment of five polycyclic aromatic hydrocarbons in city river of plateau lake, Southwest China.

Polycyclic aromatic hydrocarbons (PAHs) have long been globally distributed, and almost worldwide people are exposed to varying degrees of PAHs. Aqueous medium is an important transmission route of PAHs, but the detection of PAHs in aqueous environment has been a challenge. Herein, a magnetic hypercrosslinked polymer microsphere (Fe3O4@SiO2-PS@HCP) was developed for the effective detection of PAHs. Under the effect of multiple factors (hydrophilicity, intermolecular force and molecular volume), Fe3O4@SiO2-PS@HCP shows excellent performance on the enrichment of five PAHs in aqueous environment. Fe3O4@SiO2-PS@HCP was used to capture PAHs in city river of plateau lake. In-depth data analysis showed that factory activities and traffic emissions are the main pollution sources of PAHs. Ecological, carcinogenic and non-carcinogenic risks are almost within the safe range. The carcinogenic and non-carcinogenic risks of PAHs in children are higher than adults, which needs to be taken seriously. This method breaks the dilemma that it is difficult to enrich weakly hydrophilic pollutants in aqueous media, and complements important pathways for tracing sources of pollutants and assessing associated risks. It brings methodological enlightenment into the development of environmental pollution and human health risk assessment methodology.

Degradation and potential metabolism pathway of polystyrene by bacteria from landfill site.

Microplastics pollution has garnered significant attention in recent years. The unique cross-linked structure of polystyrene microplastics makes them difficult to biodegrade. In this study, we investigated the microbial community in landfill soil that has the ability to degrade polystyrene, as well as two isolated strains, named Lysinibacillus sp. PS-L and Pseudomonas sp. PS-P. The maximum weight loss of polystyrene film and microplastic in 30 days is 2.25% and 6.99% respectively. The water contact angle of polystyrene film decreased by a maximum of 35.70% during biodegradation. The increase in hydrophilicity is attributed to the oxidation reaction and formation of hydroxyl groups during the degradation of polystyrene. The carbon and oxygen element contents of polystyrene decreased and increased by a maximum of 3.81% and 0.79% respectively. The peak intensity changes at wavelengths of 3285-3648 cm-1 and 1652 cm-1 in Fourier transform infrared spectroscopy confirmed the formation of hydroxyl and carbonyl groups. Furthermore, quantitative PCR revealed the gene expression levels of alkane monooxygenase and alcohol dehydrogenase were upregulated by 8.8-fold and 8.5-fold respectively in PS biodegradation. Additionally, genome annotation of Pseudomonas sp. PS-P identified nine genes associated with polystyrene metabolism. These findings highlight Pseudomonas sp. PS-P as a potential candidate strain for polystyrene degradation enzymes or genes. Thus, they lay the groundwork for understanding the potential metabolic mechanisms and pathways involved in polystyrene degradation.

Integrating automated machine learning and metabolic reprogramming for the identification of microplastic in soil: A case study on soybean.

The accumulation of polyethylene microplastic (PE-MPs) in soil can significantly impact plant quality and yield, as well as affect human health and food chain cycles. Therefore, developing rapid and effective detection methods is crucial. In this study, traditional machine learning (ML) and H2O automated machine learning (H2O AutoML) were utilized to offer a powerful framework for detecting PE-MPs (0.1 %, 1 %, and 2 % by dry soil weight) and the co-contamination of PE-MPs and fomesafen (a common herbicide) in soil. The development of the framework was based on the results of the metabolic reprogramming of soybean plants. Our study stated that traditional ML exhibits lower accuracy due to the challenges associated with optimizing complex parameters. H2O AutoML can accurately distinguish between clean soil and contaminated soil. Notably, H2O AutoML can detect PE-MPs as low as 0.1 % (with 100 % accuracy) and co-contamination of PE-MPs and fomesafen (with 90 % accuracy) in soil. The VIP and SHAP analyses of the H2O AutoML showed that PE-MPs and the co-contamination of PE-MPs and fomesafen significantly interfered with the antioxidant system and energy regulation of soybean. We hope this study can provide a reliable scientific basis for sustainable development of the environment.

Molecular imprinting-based Ru@SiO2-embedded covalent organic frameworks composite for electrochemiluminescence detection of cyanidin-3-O-glucoside.

Cyanidin-3-O-glucoside (C3G), a natural antioxidant, plays multiple physiological or pathological roles in maintaining human health; thereby, designing advanced sensors to achieve specific recognition and high-sensitivity detection of C3G is significant. Herein, an imprinted-type electrochemiluminescence (ECL) sensing platform was developed using core-shell Ru@SiO2-CMIPs, which were prepared by covalent organic framework (COF)-based molecularly imprinted polymers (CMIPs) embedded in luminescent Ru@SiO2 cores. The C3G-imprinted COF shell not only helps generate a steady-enhanced ECL signal, but also enables specific recognition of C3G. When C3G is bound to Ru@SiO2-CMIPs with abundant imprinted cavities, resonance energy transfer (RET) behavior is triggered, resulting in a quenched ECL response. The constructed Ru@SiO2-CMIPs nanoprobes exhibit ultra-high sensitivity, absolute specificity, and an ultra-low detection limit (0.15 pg mL-1) for analyzing C3G in food matrices. This study provides a means to construct an efficient and reliable molecular imprinting-based ECL sensor for food analysis.

A multi-site recognition molecularly imprinted solid-phase microextraction fiber for selective enrichment of three cross-class environmental endocrine disruptors.

Molecularly imprinted solid-phase microextraction fibers with multi-site recognition were prepared for the simultaneous enrichment of three cross-class environmental endocrine disruptors (EEDs) in environmental water. The surface morphology of the multi-site recognition molecularly imprinted fibers was characterized using scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy, and surface area and pore size analyzer. Under optimal extraction conditions, the molecularly imprinted fibers showed higher extraction capacity to bisphenol F, diethyl phthalate, and methyl paraben than non-imprinted polymer fibers and commercial fibers. Compared with commercial solid-phase microextraction fibers, the multi-site recognition molecularly imprinted fibers showed superior extraction performance at different concentrations of analytes. The selectivity study confirmed that the multi-site recognition molecularly imprinted solid-phase microextraction fibers were highly selective not only for specific template molecules but also for bisphenols, parabens, and phthalates. Furthermore, the method achieved a limit of detection of 0.003-0.02 µg L-1 for the three cross-class EEDs in environmental water samples with recoveries ranging from 75.76% to 112.69% and relative standard deviations below 11.46%. Thus, the novel MIP fibers with multi-site recognition prepared in this work have provided a promising approach in the field of specific adsorption and a strategy for the simultaneous and sensitive monitoring of multiple cross-class trace EEDs.

Post-imprinting modification of molecularly imprinted polymer for proteins detection: A review.

Inspired by protein post-translational modification (PTM), post-imprinting modification (PIM) has been proposed and developed to prepare novel molecularly imprinted polymers (MIPs), which are similar to functionalized biosynthetic proteins. The PIM involves site-directed modifications in the imprinted cavity of the MIP, such as introducing high-affinity binding sites and introducing fluorescent signal molecules. This modification makes the MIP further functionalized and improves the shortcomings of general molecular imprinting, such as single function, low selectivity, low sensitivity, and inability to fully restore the complex function of natural antibodies. This paper describes the characteristics of PIM strategies, reviews the latest research progress in the recognition and detection of protein biomarkers such as lysozyme, prostate-specific antigen, alpha-fetoprotein, human serum albumin, and peptides, and further discusses the importance, main challenges, and development prospects of PIM. The PIM technology has the potential to develop a new generation of biomimetic recognition materials beyond natural antibodies. It can be used in bioanalysis and other multitudinous fields for its unique features in molecule recognition.

Engineering green MOF-based superhydrophobic sponge for efficiently synchronous removal of microplastics and pesticides from high-salinity water.

Microplastics (MPs) and pesticides are becoming an intractable environmental issue due to their wide spreading and non-degradable nature, posing serious threat to ecosystem and human health. To settle such dilemma, this work reasonably designed a superhydrophobic MOF-based coated sponge (ODSOSS/TiO2/Ni-MOF/PDA@Sponge) through the combination of an environmentally friendly in-situ supersaturated coprecipitation and polysesiloxane modification method. Among them, (I) the introduction of polydopamine (PDA) not only improves the adhesion between coatings and sponge, but also enhances the growth of MOF structure through complexation. (II) The obtained Ni-MOF shows large-area microscale anthemy structure with multilayered flaky texture, forming heterogeneously hierarchical structure with the deposited TiO2 nanoparticles, which promotes photodegradation ability of TiO2 owing to great specific surface area of Ni-MOF. (III) The high specific large area Ni-MOF supplies sufficient action sites for linkage of PDA and polysesiloxane molecules with unique nanocage-like structure, thus further greatly increasing adsorption force for various pollutants. (IV) The superhydrophobicity protect the porous channels of MOF from contamination of various absorbed pollutants, while TiO2 nanoparticles effectively photodegrade the absorbed organic pollutants, endowing the sponge superior recyclability. The superhydrophobic sponge selectively rapidly and synchronously adsorbs various MPs (maintained almost 100% after 60 cycles) and pesticides (adsorption rates 71.6%-95.1%) from high-salinity water. The large-area sponge (9 cm × 6 cm × 1 cm) simultaneously removes almost 100% MPs (40 mg/L), Sudan Ⅲ (10 mg/L), kerosene (30 mL/L), and four pesticides (10 mg/L) within 1 min. Particularly, four pesticides are quickly photocatalytic degraded by the coated sponge. The free radical capture trials show that hydroxyl radicals (·OH) are the main active species of pesticide degradation. Furthermore, we reveal the negative centers where pesticide molecules are most vulnerable to ·OH attack, on basis of the charge distribution and molecular electrostatic potential (MEP) analysis. The adsorption mechanisms are carefully clarified through theoretical calculation and experimental data. This work not only provide an effective superhydrophobic candidate for MPs and pesticides removal in a broad applicable scope (especially in high-salinity wastewater), but also opens a new strategy for environmental remediation.

A molecularly imprinted fiber array solid-phase microextraction strategy for simultaneous detection of multiple estrogens.

A kind of selective enrichment material based on a homemade molecularly imprinted polymer (MIP) fiber array with high adsorption capacity was developed for the accurate analysis of estrogens in food samples. Here, the MIP with 17ß-estradiol as the template was obtained by in situ polymerization. The chemical composition, morphologies, surface area, and pore size of the polymer were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and Brunauer-Emmett-Teller theory. The extraction time, desorption solvent, desorption time, ionic strength, and the pH of solution were investigated to ascertain the best extraction conditions. Under the optimal extraction conditions, three fiber coatings of 17ß-estradiol MIP and commercial polyacrylate (PA) were bound to a homemade handle to assemble the fiber array, respectively. The findings showed that the three-fiber array of the MIP significantly improved the extraction capacity by 145 times compared to PA. The MIP fiber array showed high adsorption capacity for the template molecule 17ß-estradiol and its structural analogues estrone, bisphenol F, bisphenol B, and bisphenol A, with enrichment factors of 99.60-133.16. A molecularly imprinted polymer solid-phase microextraction fiber array (MIP-SPME fiber array) coupled with high-performance liquid chromatography-diode array detection was used for the analysis and detection of the five estrogens in milk and yogurt samples. Satisfactory recoveries were achieved ranging from 74.75-119.41% with <9.42% relative standard deviations. The developed method for the simultaneous determination of trace estrogens in food samples exhibited a limit of detection of 0.33 µg L-1. The MIP-SPME fiber array provided an available strategy for improving the selectivity and adsorption capacity of SPME for trace target component analysis in complex matrices and increasing the sensitivity of the analytical method.

Molecularly Imprinting-Aptamer Techniques and Their Applications in Molecular Recognition.

Molecular imprinting-aptamer techniques exhibit the advantages of molecular imprinting and aptamer technology. Hybrids of molecularly imprinted polymer-aptamer (MIP-aptamer) prepared by this technique have higher stability, binding affinity and superior selectivity than conventional molecularly imprinted polymers or aptamers. In recent years, molecular imprinting-aptamer technologies have attracted considerable interest for the selective recognition of target molecules in complex sample matrices and have been used in molecular recognition such as antibiotics, proteins, viruses and pesticides. This review introduced the development of molecular imprinting-aptamer-combining technologies and summarized the mechanism of MIP-aptamer formation. Meanwhile, we discussed the challenges in preparing MIP-aptamer. Finally, we summarized the application of MIP-aptamer to the molecular recognition in disease diagnosis, environmental analysis, food safety and other fields.

Paper-Based Molecular-Imprinting Technology and Its Application.

Paper-based analytical devices (PADs) are highly effective tools due to their low cost, portability, low reagent accumulation, and ease of use. Molecularly imprinted polymers (MIP) are also extensively used as biomimetic receptors and specific adsorption materials for capturing target analytes in various complex matrices due to their excellent recognition ability and structural stability. The integration of MIP and PADs (MIP-PADs) realizes the rapid, convenient, and low-cost application of molecular-imprinting analysis technology. This review introduces the characteristics of MIP-PAD technology and discusses its application in the fields of on-site environmental analysis, food-safety monitoring, point-of-care detection, biomarker detection, and exposure assessment. The problems and future development of MIP-PAD technology in practical application are also prospected.

Generic imprinted fiber array strategy for high-throughput and ultrasensitive simultaneous determination of multiple neonicotinoids.

Herein, a new generic fiber array based on molecular imprinting solid-phase microextraction (MIP-SPME) technology, was described to enrich trace multiple neonicotinoids with high flux from the food matrix. To begin with adsorption experiments coupled with theoretical calculations provided universal means for selecting the preferred template molecule clothianidin (CLT). Results demonstrated that the CLT-MIP fiber array exhibited significantly superior enrichment ability of 1189-2356-folds for six neonicotinoids compared with two kinds of commercial fiber arrays. Furthermore, the practicability of the CLT-MIP fiber array was verified by simultaneously determining multiple neonicotinoids in tea and honey samples. The CLT-MIP fiber array showed a limit of detection (LOD) of 0.03-0.58 µg/L for six neonicotinoids. The method also exhibited satisfactory recoveries ranging from 85.4% to 116.8% with RSD (n = 3) less than 8.8%. The imprinted fiber array has the advantages of high-throughput, predominant reproducibility, and accurate quantitation multi-component, and it may open up a new mean to efficiently enrich high-throughput and simultaneously detect multiple compounds from food samples.

Chiral molecularly imprinted polymeric stir bar sorptive extraction for naproxen enantiomer detection in PPCPs.

Chiral micropollutant analysis in pharmaceuticals and personal care products (PPCPs) is interesting but challenging. We firstly developed a series of chiral molecularly imprinted polymeric (CMIP) stir bar sorptive extraction coatings by combining a chiral template with chiral functional monomers via a click reaction for naproxen enantiomer analysis in PPCPs. Heterochiral selectivity was observed in the molecule recognition of the CMIP coatings, which demonstrated good adsorption capability for the chiral template and its structurally similar chiral compounds. The coatings also exhibited excellent enrichment capability for chiral analytes in an aqueous matrix. The surface morphology and pore structure of the CMIP coatings were characterized. The molecular interactions between the chiral template and chiral functional monomer were investigated through UV-vis spectroscopy and theoretical calculations to prove the effective interactions existing in the heterochiral MIPs. The CMIP coatings were used to enrich naproxen enantiomers in chiral drug and environmental water samples, and satisfactory recoveries (83.98 %-118.88 %) with a relative standard deviation of 3.49 %-13.08 % were achieved. The heterochiral imprinted coating-based method provided a sensitive, selective, and effective enrichment strategy for chiral micropollutant analysis in PPCPs. This technique is critical for chiral molecule recognition and enantiomer analysis in complex samples.

Whole exome sequencing reveals novel CEP104 mutations in a Chinese patient with Joubert syndrome.

BACKGROUND: Joubert syndrome (JS, OMIM: 213300) is a recessive developmental disorder characterized by cerebellar vermis hypoplasia and a distinctive mid-hindbrain malformation called the "molar tooth sign" on axial magnetic resonance imaging. To date, more than 35 ciliary genes have been identified as the causative genes of JS. METHODS: Whole exome sequencing was performed to detect the causative gene mutations in a Chinese patient with JS followed by Sanger sequencing. RT-PCR and Sanger sequencing were used to confirm the abnormal transcript of centrosomal protein 104 (CEP104, OMIM: 616690). RESULTS: We identified two novel heterozygous mutations of CEP104 in the proband, which were c.2364+1G>A and c.414delC (p.Asn138Lysfs*11) (GenBank: NM_014704.3) and consistent with the autosomal recessive inheritance mode. CONCLUSION: Our study reported the fourth case of JS patients with CEP104 mutations, which expands the mutation spectrum of CEP104 and elucidates the clinical heterogeneity of JS.

Synthesis of polyaniline nanofibrous networks with the aid of an amphiphilic ionic liquid.

In this work, polyaniline (PANI) nanofibrous networks were prepared using ionic liquid (IL), 1-hexadecyl-3-methylimidazolium chloride (C16MIMCl), as a template through oxidative polymerization of aniline with ammonium persulfate. The resulting PANI was characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis, and FTIR. It was indicated that the as-prepared PANI was in the emeraldine form and its morphology strongly depended on the molar ratio of aniline/C16MIMCI. A possible mechanism for the formation of PANI nanofibrous networks was that the ordered micro-domains of the IL acted as template to direct the growth of the nanostructures.