Biodegradable Piezoelectric Force Sensor.

Measuring vital physiological pressures is important for monitoring health status, preventing the buildup of dangerous internal forces in impaired organs, and enabling novel approaches of using mechanical stimulation for tissue regeneration. Pressure sensors are often required to be implanted and directly integrated with native soft biological systems. Therefore, the devices should be flexible and at the same time biodegradable to avoid invasive removal surgery that can damage directly interfaced tissues. Despite recent achievements in degradable electronic devices, there is still a tremendous need to develop a force sensor which only relies on safe medical materials and requires no complex fabrication process to provide accurate information on important biophysiological forces. Here, we present a strategy for material processing, electromechanical analysis, device fabrication, and assessment of a piezoelectric Poly-l-lactide (PLLA) polymer to create a biodegradable, biocompatible piezoelectric force sensor, which only employs medical materials used commonly in Food and Drug Administration-approved implants, for the monitoring of biological forces. We show the sensor can precisely measure pressures in a wide range of 0-18 kPa and sustain a reliable performance for a period of 4 d in an aqueous environment. We also demonstrate this PLLA piezoelectric sensor can be implanted inside the abdominal cavity of a mouse to monitor the pressure of diaphragmatic contraction. This piezoelectric sensor offers an appealing alternative to present biodegradable electronic devices for the monitoring of intraorgan pressures. The sensor can be integrated with tissues and organs, forming self-sensing bionic systems to enable many exciting applications in regenerative medicine, drug delivery, and medical devices.

Development of Targeted Nanoscale Drug Delivery System for Osteoarthritic Cartilage Tissue.

Osteoarthritis is a severe and debilitating joint disease, which is characterized as results from damage and degeneration of the articular cartilage of the joint surfaces. The incidence of osteoarthritis is growing increasingly high while current treatment methods remain suboptimal. The major issue for current osteoarthritic medications is that patients frequently experience adverse, nonspecific side effects that are not a direct result of the specific pharmacological action of the drug. The treatment processes could be made more effective, safe, and comfortable if it were possible to deliver the drugs specifically to cartilage tissue. Therefore, developing site-specific and controlled drug release delivery systems is needed for overcoming the aforementioned issues. We have developed a poly(lactic-co-glycolic acid) (PLGA)-based nanoscale drug delivery system based on a short cartilage-targeting peptide sequence: WYRGRL. Nanoparticles (NPs) made of methoxy-poly(ethylene glycol) (PEG)-PLGA and maleimide-PEG-PLGA were prepared using a water-in-oil-in-water double emulsion and solvent evaporation method. Fluorescein isothiocyanate (FITC)-tagged WYRGRL peptide was then linked to the surface of the nanoparticles through the alkylation reaction between the sulfhydryl groups at the N-terminal of the peptide and the C═C double bond of maleimide at one end of the polymer chain to form thioether bonds. The conjugation of FITC-tagged WYRGRL peptide to PLGA NPs was confirmed by NMR technique. We further demonstrated that the novel delivery system binds very specifically to cartilage tissue in vitro and ex vivo. Given that biodegradable PLGA-based NPs have shown promise for drug delivery, they could be used for a positive advancement for treatments of osteoarthritic patients by creating a more effective treatment process that achieves healing results faster and with fewer deleterious side effects. Taken together, these promising results indicated that this nanoscale targeting drug delivery system was able to bind to cartilage tissue and might have a great potential for treating osteoarthritis.

Small molecule delivery through nanofibrous scaffolds for musculoskeletal regenerative engineering.

Musculoskeletal regenerative engineering approach using small bioactive molecules in conjunction with advanced materials has emerged as a highly promising strategy for musculoskeletal repair and regeneration. Advanced biomaterials technologies have revealed nanofiber-based scaffolds for musculoskeletal tissue engineering as vehicles for the controlled delivery of small molecule drugs. This review article highlights recent advances in nanofiber-based delivery of small molecules for musculoskeletal regenerative engineering. The article concludes with perspectives on the challenges and future directions. FROM THE CLINICAL EDITOR: In this review, advances in nanofiber-based delivery of small molecules are discussed from the standpoint of their potential role in musculoskeletal regenerative engineering, highlighting both future directions and current challenges.

Osteo-inductive effect of piezoelectric stimulation from the poly(l-lactic acid) scaffolds.

Piezoelectric biomaterials can generate piezoelectrical charges in response to mechanical activation. These generated charges can directly stimulate bone regeneration by triggering signaling pathway that is important for regulating osteogenesis of cells seeded on the materials. On the other hand, mechanical forces applied to the biomaterials play an important role in bone regeneration through the process called mechanotransduction. While mechanical force and electrical charges are both important contributing factors to bone tissue regeneration, they operate through different underlying mechanisms. The utilizations of piezoelectric biomaterials have been explored to serve as self-charged scaffolds which can promote stem cell differentiation and the formation of functional bone tissues. However, it is still not clear how mechanical activation and electrical charge act together on such a scaffold and which factors play more important role in the piezoelectric stimulation to induce osteogenesis. In our study, we found Poly(l-lactic acid) (PLLA)-based piezoelectric scaffolds with higher piezoelectric charges had a more pronounced osteoinductive effect than those with lower charges. This provided a new mechanistic insight that the observed osteoinductive effect of the piezoelectric PLLA scaffolds is likely due to the piezoelectric stimulation they provide, rather than mechanical stimulation alone. Our findings provide a crucial guide for the optimization of piezoelectric material design and usage.

The roles of ions on bone regeneration.

Bone scientists are actively investigating a range of methods to promote skeletal tissue regeneration. A review of recent literature has revealed that several ions are uniquely capable of inducing stem cell differentiation down desired lineages. There exists enormous promise for these ions to be used in bone regenerative medicine. Given that these ions can be released from biodegradable polymeric materials, their long-term delivery can be achieved through a variety of controlled-release strategies compared with the relatively few options available for expensive and fragile polypeptide-based growth factors. In this review, we highlight the developments in using ions in conjunction with biomaterials for bone regeneration.

Short-term administration of small molecule phenamil induced a protracted osteogenic effect on osteoblast-like MC3T3-E1 cells.

Sustained administration (21-day treatment) of the small molecule phenamil has been proposed as an alternative osteogenic factor when used in conjunction with a biodegradable scaffold for in vitro osteogenesis. While promising, the major issue associated with small molecules is non-specific cytotoxicity. The aim of this study was to minimize the side-effects from small-molecule drugs by reducing the frequency of administration. Toward this goal, we investigated whether a shorter phenamil treatment is sufficient to induce in vitro osteogenesis. We compared the effects of short-term (12 h) and continuous treatments of phenamil on osteoblastic differentiation and mineralization. Alkaline phosphatase (ALP) and osteopontin (OPN) activity were used as markers for osteoblastic differentiation. Measurement of the calcium content of the extracellular matrix was used as the hallmark for in vitro bone formation after 21 days of culture. Our findings revealed that both short and continuous phenamil treatment triggers osteoblastic differentiation and mineralization of MC3T3-E1 cells on a biodegradable polymeric scaffold composed of polylactic-co-glycolic acid (PLAGA) at the same time points. In addition, in order to fabricate a phenamil-loaded PLAGA scaffold, the small molecule phenamil was physically absorbed onto the surface of scaffolds and the bioactivity of the loaded scaffolds was evaluated. Furthermore, biochemical analysis indicated that short phenamil treatment of cells was accompanied by upregulation in protein expression of integrin α5, p125(FAK) and phosphorylation of CREB. These effects may contribute to the downstream signalling cascade necessary for osteogenesis, and such responses may account for our observed protracted osteogenic differentiation in vitro. Copyright © 2013 John Wiley & Sons, Ltd.

Evaluating the feasibility of utilizing the small molecule phenamil as a novel biofactor for bone regenerative engineering.

Osteoblast cell adhesion and differentiation on biomaterials are important achievements necessary for implants to be useful in bone regenerative engineering. Recombinant bone morphogenetic proteins (BMPs) have been shown to be important for these processes; however, there are many challenges associated with the widespread use of these proteins. A recent report demonstrated that the small molecule phenamil, a diuretic derivative, was able to induce osteoblast differentiation and mineralization in vitro via the canonical BMP signalling cascade (Park et al., 2009). In this study, the feasibility of using phenamil as a novel biofactor in conjunction with a biodegradable poly(lactide-co-glycolide acid) (PLAGA) polymeric scaffold for engineering bone tissue was evaluated. The in vitro cellular behaviour of osteoblast-like MC3T3-E1 cells cultured on PLAGA scaffolds in the presence of phenamil at 10 µM were characterized with regard to initial cell adhesion, proliferation, alkaline phosphatase (ALP) activity and matrix mineralization. The results demonstrate that phenamil supported cell proliferation, promoted ALP activity and facilitated matrix mineralization of osteoblast-like MC3T3-E1 cells. Moreover, in this study, we found that phenamil promoted integrin-mediated cell adhesion on PLAGA scaffolds. It was also shown that phenamil encapsulated within porous, microsphere PLAGA scaffolds retained its osteogenic activity upon release. Based on these findings, the small molecule phenamil has the potential to serve as a novel biofactor for the repair and regeneration of bone tissues.

Poly aspartic acid peptide-linked PLGA based nanoscale particles: potential for bone-targeting drug delivery applications.

Delivering drugs specifically to bone tissue is very challenging due to the architecture and structure of bone tissue. Poly(lactic-co-glycolic acid) (PLGA)-based nanoparticles (NPs) hold great promise for the delivery of therapeutics to bone tissue. The goal of the present research was to formulate a PLGA-based NP drug delivery system for bone tissue exclusively. Since poly-aspartic acids (poly-Asp) peptide sequence has been shown to bind to hydroxyapatite (HA), and has been suggested as a molecular tool for bone-targeting applications, we fabricated PLGA-based NPs linked with poly-Asp peptide sequence. Nanoparticles made of methoxy - poly(ethylene glycol) (PEG)-PLGA and maleimide-PEG-PLGA were prepared using a water-in-oil-in-water double emulsion and solvent evaporation method. Fluorescein isothiocyanate (FITC)-tagged poly-Asp peptide was conjugated to the surface of the nanoparticles via the alkylation reaction between the sulfhydryl groups at the N-terminal of the peptide and the CC double bond of maleimide at one end of the polymer chain to form thioether bonds. The conjugation of FITC-tagged poly-Asp peptide to PLGA NPs was confirmed by NMR analysis and fluorescent microscopy. The developed nanoparticle system is highly aqueous dispersible with an average particle size of ∼80 nm. In vitro binding analyses demonstrated that FITC-poly-Asp NPs were able to bind to HA gel as well as to mineralized matrices produced by human mesenchymal stem cells and mouse bone marrow stromal cells. Using a confocal microscopy technique, an ex vivo binding study of mouse major organ ground sections revealed that the FITC-poly-Asp NPs were able to bind specifically to the bone tissue. In addition, proliferation studies indicated that our FITC-poly-Asp NPs did not induce cytotoxicity to human osteoblast-like MG63 cell lines. Altogether, these promising results indicated that this nanoscale targeting system was able to bind to bone tissue specifically and might have a great potential for bone disease therapy in clinical applications.

Simple signaling molecules for inductive bone regenerative engineering.

With greater than 500,000 orthopaedic procedures performed in the United States each year requiring a bone graft, the development of novel graft materials is necessary. We report that some porous polymer/ceramic composite scaffolds possess intrinsic osteoinductivity as shown through their capacity to induce in vivo host osteoid mineralization and in vitro stem cell osteogenesis making them attractive synthetic bone graft substitutes. It was discovered that certain low crystallinity ceramics partially dissociate into simple signaling molecules (i.e., calcium and phosphate ions) that induce stem cells to endogenously produce their own osteoinductive proteins. Review of the literature has uncovered a variety of simple signaling molecules (i.e., gases, ions, and redox reagents) capable of inducing other desirable stem cell differentiation through endogenous growth factor production. Inductive simple signaling molecules, which we have termed inducerons, represent a paradigm shift in the field of regenerative engineering where they can be utilized in place of recombinant protein growth factors.

The small molecule PKA-specific cyclic AMP analogue as an inducer of osteoblast-like cells differentiation and mineralization.

Osteoblastic differentiation is an important landmark for bone formation, bone repair and regeneration; however, it is a very complex process controlled by different signalling mechanisms. Several groups have reported that the cyclic adenosine monophosphate (cAMP) signalling system is responsible for regulating osteoblast cell differentiation. Nonetheless, to date, the principle role of the cAMP molecules related to this process remains controversial. Moreover, the underlying cAMP-dependent signalling cascade governing the osteoblastic differentiation has not been clarified. In this study we investigated the roles of the cAMP-dependent protein kinase A (PKA) signalling in proliferation, differentiation and mineralization of osteoblast-like MC3T3-E1 cells, using the PKA-specific small molecule cAMP analogue, 6-Bnz-cAMP, at 100 µM. Alkaline phosphatase (ALP) activity, runt transcription factor 2 (Runx2), osteopontin (OPN) and osteocalcin (OCN) protein expressions were used as osteoblast-specific markers to demonstrate osteoblastic differentiation. Further, calcium measurement of the extracellular matrix was employed as the hallmark of matrix mineralization or calcification. We report here that activation of PKA by the small molecule 6-Bnz-cAMP induces osteoblastic differentiation and matrix mineralization of osteoblast-like MC3T3-E1 cells. Moreover, 6-Bnz-cAMP does not induce cytotoxicity to the cells, as revealed by our cell proliferation studies. Therefore, based on these findings, we propose that the PKA-specific small molecule 6-Bnz-cAMP may serve as a novel bone-inducing growth factor for repairing and regenerating bone tissues during bone-regenerative engineering.