NAM-help or burden? Intercultural evaluation of parental stress caused by nasoalveolar molding: a retrospective multi-center study.

OBJECTIVES: Nasoalveolar molding (NAM) was developed to facilitate easier treatment and better outcomes for cleft lip and palate (CLP) patients. The aim of this study was to investigate the parental burden and possible intercultural differences of this treatment modality, which is often argued to burden parents to an extraordinary amount. MATERIALS AND METHODS: Standardized questionnaires (available in English, Mandarin, and German) with 15 non-specific and 14 NAM-specific items to be retrospectively answered by Likert scales by parents of unilateral CLP patients with completed NAM treatment. RESULTS: The parents of 117 patients from two treatment centers in Taiwan and Germany were included. A very high level of overall satisfaction was found in both countries with significant intercultural differences in prenatal parent information, feeding problems, dealing with 3rd party's perception, and experienced personal effort. CONCLUSION: NAM is an effective treatment tool for children's CLP deformities and their caregivers in overcoming the feeling of helplessness. Intercultural differences may be due to infrastructural reasons, cultural attitudes and habits, or different public medical education. CLINICAL RELEVANCE: In addition to facilitating easier surgical treatment, NAM can be seen as a powerful coping strategy for parents dealing with a CLP deformity of their child and does not seem to burden them extraordinarily.

A prospective longitudinal study of postnatal dentoalveolar and palatal growth: The anatomical basis for CAD/CAM-assisted production of cleft-lip-palate feeding plates.

This study describes the dentoalveolar and palatal growth during the first months of life. Knowledge concerning this development is essential to avoid unwanted events such as mucosal ulcerations or restriction of growth when cleft-lip and palate (CLP) patients are treated. The results involve the generation of CAD/CAM CLP-feeding plates. Intraoral impressions from 32 healthy newborns were taken monthly for 5 months, supplemented by measurements of body weight, length, and occipital-frontal head circumference. The casts were digitalized, and two observers manually selected defined anatomical landmarks on virtual 3-D models. The distances between these landmarks were evaluted. Statistical analysis included an inter-rater agreement analysis and the determination of growth. In total, 213 casts were analyzed, with 65 models excluded because of inaccuracies in impression-taking or cast production. Overall longitudinal growth was 20.3%, whereas transversal growth reached a maximum of 21.1%. Vertical growth was 32.4% at the tuberal level. On the basis of these results, a semiautomated series of feeding plates allowing for monthly expansion could be generated. The acquired data serve as a useful reference for other pediatric and orthofacial investigations and treatments. One such application is the automated, fully virtual manufacture of CLP-feeding plates based on only one impression-taking. Our data reveal when caution is needed to prevent ulceration. The series of plates generated can minimize the time-consuming impression-taking and the production of further plaster models. The method of measurement is suitable for documentary purposes. Clin. Anat. 30:846-854, 2017. © 2017 Wiley Periodicals, Inc.

Functional Outcome of CAD/CAM-Assisted versus Conventional Microvascular, Fibular Free Flap Reconstruction of the Mandible: A Retrospective Study of 30 Cases.

Background Different advantages of virtually planned and guided mandibular reconstructions have been described. Functional analyses and comparisons with conventionally reconstructed patients. Methods We retrospectively analyzed 30 cases of mandibular reconstructions that involved virtually planned or conventional microvascular, fibular free flaps that occurred between April 2011 and December 2014 at a single center. The results were also compared with a healthy cohort of 30 participants. Axiographic measurements were performed postoperatively, and uni- and multivariate regressions analyses were performed to determine the association between possible predictor variables on functional outcome. Results Operation time, hospital stay, number of osteotomies, incidence of postoperative temporomandibular joint pain, noise, and tension did not differ significantly between the conventional and computer-aided design/computer-aided manufacturing (CAD/CAM) groups (each p > 0.05). Mouth opening and protrusion and laterotrusion also did not differ significantly (each p > 0.05) but were significantly reduced compared with the healthy group. Univariate analysis showed a significant influence of postoperative irradiation on mouth opening and laterotrusion in the conventional group (p = 0.047 and p = 0.028). In addition, multivariate analysis showed a significant influence of indication and number of osteotomies on laterotrusion (p = 0.005 and p = 0.043). Uni and multivariate analyses revealed a significant influence of indication, preoperative irradiation, and number of osteotomies on protrusion and mouth opening in the CAD/CAM group (p = 0.016, p = 0.044, and p = 0.028). Conclusion CAD/CAM-assisted reconstructions of the mandible give comparable functional results with those of the conventional technique, but no functional superiority has been established. Nevertheless, the integration of virtual planning and guided surgery is definitely of significant value but should be indicated individually case by case.

Three-Dimensional Analyses of Postoperative Effects of Surgically Assisted Rapid Palatal Expansion (SARPE) on the Soft Tissue of the Midface Region and the Upper Airway Space Using Stereophotogrammetry and Cone Beam Computed Tomography (CBCT).

BACKGROUND: Surgically assisted rapid palatal expansion (SARPE) is an established method to treat transverse maxillary hypoplasia in skeletally mature adult patients. SARPE affects the surrounding soft tissue. In addition, effects on the airway and breathing have been described. Aim of this study was to assess the effects of SARPE on the nasal soft tissue and the upper airway by means of three-dimensional stereophotogrammetry and cone beam computed tomography (CBCT). METHODS: This retrospective study used preoperative and postoperative cone beam computed tomography (CBCT) scans and three-dimensional stereophotogrammetry. Ten skeletally adult patients (4 male, 6 female; mean age 27.68 years) with transverse maxillary hypoplasia were included. Patients had undergone SARPE procedure, performed by the same surgical team using the same technique. Nasal soft tissue changes were analyzed, using three-dimensional stereophotogrammetry records taken preoperatively (t0) and at the postoperative checkup appointment (t1). The upper airway was assessed using CBCT scans for surgical planning (t0) and the first scan taken after SARPE (t1). RESULTS: In stereophotogrammetry, it was shown that only a few soft tissue nasal parameters increased significantly and SARPE leads to mainly clinically irrelevant changes in nasal soft tissue. In CBCT, only a significant increase in nasopharyngeal airway volume was found. DISCUSSION: Results were in alignment with literature. The effects of SARPE on the nasal soft tissue are mostly statistically insignificant and clinically irrelevant. Airway volume significantly increased in the nasopharyngeal area. Further research on SARPE effects should be conducted to reinforce SARPE as a treatment option for sleep apnea patients.

PET-MRI fusion in head-and-neck oncology: current status and implications for hybrid PET/MRI.

PURPOSE: To review the current status and clinical effect of PET-MRI image fusion in the staging of head-and-neck cancer and to show its implications for imaging with future hybrid PET/MRI scanners. MATERIALS AND METHODS: We reviewed the current literature in order to provide an overview of the potential of the combination of the anatomic and functional imaging capabilities of magnetic resonance imaging (MRI) and of the potential for molecular and metabolic imaging with Positron emission tomography (PET). The research question was whether these image devices might be of synergistic value. RESULTS: PET with [18F]-fluorodeoxyglucose has shown promising results for the assessment of lymph node involvement in cancer, the identification of distant metastasis and synchronous and metachronous tumors, and the evaluation of tumor recurrence or carcinoma of an unknown primary. For morphologic imaging, MRI has several advantages compared with computed tomography in the head-and-neck area. This is mainly because of the superior soft tissue contrast and fewer artifacts from dental implants. Moreover, MRI allows functional imaging, such as the assessment of perfusion with dynamic contrast-enhanced MRI. The published data indicate that image fusion should be beneficial in the case of the recurrence of oromaxillofacial cancer and in the evaluation of potential metastatic lymph nodes. However, retrospective image fusion is technically demanding in the head-and-neck area, mainly because of the varied patient positions used for the various scanners and the anatomic complexity of this region. CONCLUSIONS: Combined PET/MRI scanners might overcome the above-named problems. Both sequential and fully integrated PET/MRI scanners are now available in selected departments, and future studies will show whether hybrid PET/MRI is of greater clinical value than PET/CT and retrospective image fusion techniques.

RapidNAM: Algorithm for the Semi-Automated Generation of Nasoalveolar Molding Device Designs for the Presurgical Treatment of Bilateral Cleft Lip and Palate.

OBJECTIVE: Nasoalveolar molding (NAM) is an accepted presurgical treatment modality for newborns with cleft lip and palate (CLP). However, the therapy is time-consuming and requires high expertise. To facilitate the treatment, we reveal an algorithm for the automated generation of patient individual NAM devices for neonates with bilateral cleft lip and palate (BCLP) and present results of software validation. METHODS: The algorithm was implemented utilizing Python 2.7 and Blender 2.78a based on 17 digitized (3D-scanning) impressions of maxillae with BCLP. The algorithm segments alveolar structures, bridges clefts, and generates a series of NAM device designs, destined for 3D-printing for subsequent treatment. The datasets were used for first software tests. For validation, a follow-up study was carried out using six new, independent maxilla models. The generated NAM plate designs were examined regarding their potential clinical usability. Furthermore, a deviation analysis was carried out, which measured the plate models' and upper jaw models' surface deviations. RESULTS: Series of NAM devices were generated automatically in 21 out of 23 cases. We calculated an average surface deviation of 0.140 mm (SD: 0.016 mm). Four out of six plate series (follow-up trials) were assessed as probably usable with minor adjustments. CONCLUSION: The algorithm generates 3D-printable series of NAM device designs reliably. We expect most of the series to be clinically usable and that the first plates of each series will fit the patients' maxillae. SIGNIFICANCE: The proposed algorithm has the potential to reduce the therapist's manual work and therefore time effort/costs related to NAM.

Reverse flow facial artery as recipient vessel for perforator flaps.

In perforator flaps, anastomosis between flap and recipient vessels in the neck area is often difficult due to small vessel diameter and short pedicle. The aim of this study was to investigate whether the retrograde flow of the distal, paramandibular part of the facial artery would provide sufficient pressure and size to perfuse perforator flaps. Before and after occlusion of the contralateral facial artery, retrograde and anterograde arterial pressure was measured on both sides of the facial artery in 50 patients. The values were compared with the mean systemic arterial pressure. Diameters of facial arteries in the paramandibular region and perforator flap vessels were evaluated by morphometry. Arterial pressure in the distal facial artery with retrograde flow was 76% of the systemic arterial pressure. The latter equaled approximately the anterograde arterial pressure in the proximal end of the facial artery. Mean arterial pressure of the facial arteries decreased after proximal occlusion of the contralateral facial artery, which was not significant (P = 0.09). Mean diameter of the distal facial arteries in the mandibular region was 1.6 mm (range 1.3-2.2 mm; standard deviation 0.3 mm; n = 50), that of the perforator flap arteries 1.3 mm (0.9-2.6 mm; 0.4 mm; n = 20). Facial arteries, based on reverse flow, successfully supported all 20 perforator flaps. Retrograde pulsatile flow in the distal facial artery sustains perforator flaps even if the contralateral facial artery is occluded. Proximity of the distal facial arteries to the defect compensates for short pedicles. Matching diameters of the arteries are ideal for end-to-end anastomosis.

Establishment of a finite element model of a neonate's skull to evaluate the stress pattern distribution resulting during nasoalveolar molding therapy of cleft lip and palate patients.

Nasoalveolar Molding (NAM) is associated with ambivalent acceptance regarding effectiveness and unknown long-term results. Our purpose was to analyze the stress distribution patterns within the viscero- and neurocranium of neonates during the first phase of NAM therapy. A finite element (FE) model of a healthy four-week-old neonate was generated, derived from a computed tomography scan allowing the implementation of a bone-density-dependent material model. The influence of dental germs with variable material properties, the cleft width and area of expected force application were analyzed in a worst-case scenario. The resulting stress distribution patterns for each situation were analyzed using the software Ansys APDL. The established FE model was verified with a convergence analysis. Overall, stress patterns at the age of four weeks showed von Mises stress values below 60.000 Pa in the viscero- and neurocranium. The influences of the allocation of material properties for the dental germs, the area of force application, and the cleft width were negligible. A workflow to simulate the stress distribution and deformation in neonates attributable to various areas of force application has been established. Further analyses of the skulls of younger and older neonates are needed to describe the stress distribution patterns during NAM therapy.

A semi-automated virtual workflow solution for the design and production of intraoral molding plates using additive manufacturing: the first clinical results of a pilot-study.

Computer-aided design and computer-aided manufacturing (CAD/CAM) technology has been implemented in the treatment of cleft lip and palates (CLP) by several research groups. This pilot study presents a technique that combines intraoral molding with a semi-automated plate generation and 3D-printing. The clinical results of two intraoral molding approaches are compared. This is the first clinical investigation of semi-automated intraoral molding. Our study included newborns with unilateral CLP. Plaster models were digitalized and measured by two independent observers. Two methods of CAD/CAM-assisted intraoral molding were compared: (i) stepwise manual design of molding plates (conventional CAD/CAM-intraoral molding) and (ii) a semi-automated approach with an automated detection of alveolar ridges (called RapidNAM) assisted by a graphical user interface (GUI). Both approaches significantly narrowed the clefts and resulted in a harmonic alveolar crest alignment. The GUI was easy to use and generated intraoral molding devices within minutes. The presented design solution is an efficient technical refinement with good clinical results. The semi-automated plate generation with a feasible GUI is fast but allows individual adaptations. This promising technique might facilitate and foster the more widespread use of CAD/CAM-technology in intraoral molding therapy.

RapidNAM: generative manufacturing approach of nasoalveolar molding devices for presurgical cleft lip and palate treatment.

Nasoalveolar molding (NAM) is an accepted treatment strategy in presurgical cleft therapy. The major drawbacks of the treatment listed in the literature relate to the time of the treatment and the coordination of the required interdisciplinary team of therapists, parents, and patients. To overcome these limitations, we present the automated RapidNAM concept that facilitates the design and manufacturing process of NAM devices, and that allows the virtual modification and subsequent manufacture of the devices in advance, with a growth prediction factor adapted to the patient's natural growth. The RapidNAM concept involves (i) the prediction of three trajectories that envelope the fragmented alveolar segments with the goal to mimic a harmonic arch, (ii) the extrusion from the larger toward the smaller alveolar segment along the envelope curves toward the harmonic upper alveolar arch, and (iii) the generation of the NAM device with a ventilation hole, fixation pin, and fixation points for the nasal stents. A feasibility study for a vector-based approach was successfully conducted for unilateral and bilateral cleft lip and palate (CLP) patients. A comparison of the modified target models with the reference target models showed similar results. For further improvement, the number of landmarks used to modify the models was increased by a curve-based approach.

Axiographic results of CAD/CAM-assisted microvascular, fibular free flap reconstruction of the mandible: A prospective study of 21 consecutive cases.

Virtual planning and guided reconstruction of the mandible following ablative surgery have become standard procedures in reconstructive surgery. Many advantages regarding operation time, morphology, bony fit, and consolidation have been described, but analyses of the functional outcome of virtually planned mandibular reconstructions are lacking. We prospectively analyzed 21 consecutive cases of mandibular reconstructions using CAD/CAM-assisted microvascular, fibular free flaps in operations between July 2014 and January 2016 at a single center. Axiographic measurements were performed preoperatively and at 10 days and 3 months postoperatively and were correlated with clinical findings. Uni- and multivariate regression analyses were performed to determine the association between possible predictor variables on functional outcomes. Overall, no statistical differences between the t1 and t3 measurements were seen in the analyzed variables. The univariate analysis showed a significant influence of indication and pre- and postoperative irradiation only on mouth opening (p = 0.018, p = 0.026, and p = 0.049). Timing, the number of osteotomies, and the incidence of wound healing disturbances had no significant influence on postoperative function (p = 0.753, p = 0.69 and p = 0.776). In particular, cases without malignancy or preoperative irradiation benefitted from the integration of the CAD/CAM technique and showed good functional outcomes.

Perioperative risk factors for postoperative pulmonary complications after major oral and maxillofacial surgery with microvascular reconstruction: A retrospective analysis of 648 cases.

BACKGROUND: Postoperative pulmonary complications (PPCs) are common and result in prolonged hospital stays, higher costs and increased mortality. However, data on the incidence and predictors of PPCs after major oral and maxillofacial surgery with microvascular reconstruction are rare. This retrospective analysis identifies perioperative risk factors for postoperative pulmonary complications (PPCs) after major oral and maxillofacial surgery with microvascular reconstruction. METHODS: Perioperative data and patient records of 648 subjects were analyzed in the period of June 2007 to May 2013. PPCs were defined as pneumonia, atelectasis, pleural effusions, pulmonary embolism, pulmonary oedema, pneumothorax or respiratory failure. RESULTS: 18.8% of all patients developed PPCs. Patient-related risk factors for PPCs were male sex, advanced age, smoking, alcohol abuse, a body mass index >30, American Society of Anaesthesiologists grade higher than 2, pre-existent pulmonary diseases and preoperative antihypertensive medication. Among the investigated procedure-related variables, the length of the operation, the amount of fluid administration and blood transfusion and an impaired oxygenation index during surgery were shown to be associated with the development of PPCs. Using a multivariable logistic regression model, we identified a body mass index >30, American Society of Anaesthesiologists grade higher than 2 and alcohol abuse as independent risk factors for PPCs. CONCLUSIONS: Several perioperative factors can be identified that are associated with the development of PPCs. Patients having one or more of these conditions should be subjected to intensified postoperative pulmonary care.

Microvascular anastomosis using modified micro-stents: a pilot in vivo study.

INTRODUCTION: Microvascular sutured anastomosis remains the gold standard in microvascular flap surgery but is technically challenging, time-consuming, and sometimes unreliable. The goal of our study has been to develop a microvascular stenting system that can be used for microvascular anastomosis, even without the use of a microscope. MATERIALS AND METHODS: Custom-made stainless-steel stents were used to re-establish vessel continuity after the severance of the abdominal aortic vessel in nine rats. At 30 min after re-opening the blood flow, Doppler flowmetry and indocyanine green (ICG) angiography were used to assess vessel patency, and vessels were inspected microscopically for signs of thrombosis. RESULTS: Eight of the nine animals survived the procedure. In one case, the abdominal aorta was torn during balloon dilation of the stent. Four out of the nine stent anastomoses showed an excellent fit. In the remaining four cases, a collagen membrane and fibrin glue were successfully used to stop vascular leakage. However, these additional steps might have had a negative impact on vessel patency, and thrombus formation impaired blood flow completely in one case. CONCLUSION: Microvascular stent anastomosis is feasible and might in some cases be superior to standard sutured anastomosis. However, a number of technical difficulties remain to be addressed, and long-term results are not yet available.

Quality of life after different oncologic interventions in head and neck cancer patients.

Patient reported outcomes following head and neck cancer are of great importance, given the functional, psychological, and social impacts of the disease and its treatment. In addition, not only is the number of publications on health-related quality of life (HRQOL) increasing in a variety of specialties, but there is also a growing awareness of the potential role of HRQOL in practice. Therefore, we aimed to investigate the HRQOL of head and neck cancer patients following different oncologic interventions, using an internationally established test. In this cross-sectional study, we included three different groups of 32 patients each. Participants had histologically confirmed invasive oral squamous cell carcinoma (OSCC) in the anterior floor of the mouth. Group allocation was based on treatment modality, as follows: only surgery (group 1), operation and adjuvant radiotherapy (XRT) (group 2), and the additional presence of osteoradionecrosis (ORN) (group 3). All patients were questioned about their HRQOL, using the standardized University of Washington Quality of Life Questionnaire (UW-QOL). Surveys for groups 1 and 2 were conducted at least 24 months after the end of tumor-related treatment, in cases of ORN (group 3) 12 months after completion of disease-related treatment. A total of 96 patients were included into this study. The mean age was 62.79 ± 8.93 years. The patients in groups 1 and 2 revealed a reduced quality of life, of a greater magnitude after radiation therapy. Patients felt that radiotherapy was much worse than surgery; however, half of the patients stated that they would repeat radiation therapy if necessary. The subjective evaluation of the HRQOL after surgery and radiotherapy was a valuable instrument for assessing the rehabilitation of patients in the context of their function and quality of life. Radiation therapy can be considered a trigger of functional limitations and emotional distress that contributes to decreased HRQOL in patients with head and neck cancer.

Impression technique for monitoring and virtual treatment planning in nasoalveolar moulding.

We describe our experience with various silicone materials for making one-step and two-step impressions of the cleft-lip-palate-nose complex during nasoalveolar moulding. Our technique is superior to common alginate-based impression techniques, as it provides precise reproduction of the complex anatomy of the cleft, and is compatible with the latest available methods of planning treatment with nasoalveolar moulding, such as computer-aided reverse engineering and rapid prototyping.

Repair of oronasal fistulae by interposition of multilayered amniotic membrane allograft.

BACKGROUND: Oronasal fistulas are a frequent complication after cleft palate surgery. Numerous repair methods have been described, but wound-healing problems occur often. The authors investigated, for the first time, the suitability of multilayered amniotic membrane allograft for fistula repair in a laboratory experiment (part A), a swine model (part B), and an initial patient series (part C). METHODS: In part A, one-, two-, and four-layer porcine and human amniotic membranes (n = 20 each) were fixed in a digital towing device and the force needed for rupture was determined. In part B, iatrogenic oronasal fistulas in 18 piglets were repaired with amniotic membrane allograft, autofetal amniotic membrane, or small intestinal submucosa (n = 6 each). Healing was evaluated by probing and visual inflammation control (no/moderate/strong) on postoperative days 3, 7, 10, and 76. Histological analysis was performed to visualize tissue architecture. In part C, four patients (two women and two men, ages 21 to 51 years) were treated with multilayered amniotic membrane allograft. RESULTS: In part A, forces needed for amniotic membrane rupture increased with additional layers (p < 0.001). Human amniotic membrane was stronger than porcine membrane (p < 0.001). In part B, fistula closure succeeded in all animals treated with amniotic membrane with less inflammation than in the small intestinal submucosa group. One fistula remained persistent in the small intestinal submucosa group. In part C, all fistulas healed completely without inflammation. CONCLUSIONS: Amniotic membrane is an easily available biomaterial and can be used successfully for oronasal fistula repair. The multilayer technique and protective plates should be utilized to prevent membrane ruptures. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, V.

Secondary correction of posttraumatic orbital wall adhesions by membranes laminated with amniotic membrane.

The objective of the study was to find out if human amniotic membrane could be used for corrective surgery after trauma to the orbital wall. Because of its proposed antiadhesive qualities, it seemed to be potentially suitable. We studied 8 men (mean age 37 (range 19-74) years) who had deficient ocular movement after fractures of the orbital floor. Five of them had already been operated on. Inclusion criteria were trauma dating back more than 4 months and a soft tissue stricture in the orbital floor diagnosed by magnetic resonance imaging. Patients were treated secondarily with lysis of adhesions and insertion of allogeneic human amniotic membrane laminated on to polyglactin 910/polydioxanone foil, which functioned as the carrier material. Patients were followed up for 3 months, by which time disorders of motility of the ocular bulb had disappeared completely in 5. Two patients had improved motility and a reduction in both their subjective and objective symptoms. One patient had no improvement. The considerable reduction in adhesions and scarring after insertion of the membrane confirms previous assumptions, according to which the epithelial side of the human amniotic membrane has an antiadhesive effect because of its smooth surface.

Simulation of a MR-PET protocol for staging of head-and-neck cancer including Dixon MR for attenuation correction.

PURPOSE: To simulate and optimize a MR protocol for squamous cell cancer of the head and neck (HNSCC) patients for potential future use in an integrated whole-body MR-PET scanner. MATERIALS AND METHODS: On a clinical 3T scanner, which is the basis for a recently introduced fully integrated whole-body MR-PET, 20 patients with untreated HNSCC routinely staged with 18F-FDG PET/CT underwent a dedicated MR protocol for the neck. Moreover, a whole-body Dixon MR-sequence was applied, which is used for attenuation correction on a recently introduced hybrid MR-PET scanner. In a subset of patients volume-interpolated-breathhold (VIBE) T1w-sequences for lungs and liver were added. Total imaging time was analyzed for both groups. The quality of the delineation of the primary tumor (scale 0-3) and the presence or absence of lymph node metastases (scale 1-5) was evaluated for CT, MR, PET/CT and a combination of MR and PET to ensure that the MR-PET fusion does not cause a loss of diagnostic capability. PET was used to identify distant metastases. The PET dataset for simulated MR/PET was based on a segmentation of the CT data into 4 classes according to the approach of the Dixon MR-sequence for MR-PET. Standard of reference was histopathology in 19 cases. In one case no histopathological confirmation of a primary tumor could be achieved. RESULTS: Mean imaging time was 35:17 min (range: 31:08-42:42 min) for the protocol including sequences for local staging and attenuation correction and 44:17 min (range: 35:44-54:58) for the extended protocol. Although not statistically significant a combination of MR and PET performed better in the delineation of the primary tumor (mean 2.20) compared to CT (mean 1.40), MR (1.95) and PET/CT (2.15) especially in patients with dental implants. PET/CT and combining MR and PET performed slightly better than CT and MR for the assessment of lymph node metastases. Two patients with distant metastases were only identified by PET. CONCLUSION: We established a potential MR-protocol to be used for HNSCC patients in a recently introduced MR-PET scanner. The proposed protocol can be performed in an acceptable time frame and did not lead to a loss of diagnostic capability compared to PET/CT.