Viscous, Hofmeister Effect-Enhanced Macromolecular Adhesives for Effective Bonding in Seawater.

Deployment of adhesives in natural seawater to in situ bonds is urgently needed in engineering fields. However, stable adhesion in natural seawater remains a challenge due to the turbulent environment and high ion concentration. Herein, we reported a viscous, macromolecular underwater adhesive enhanced by Hofmeister effect (EHUA) for practical application in dynamic seawater. EHUA was synthesized via a facile one-step copolymerization. After transferred into seawater, the solvent of EHUA was exchanged to seawater, and thereby hydrogen bonds inside the adhesive were activated and enhanced by Hofmeister effect. We demonstrated EHUA can adhere on the surface in turbulent seawater, and the adhesive strength could reach 1.691 MPa. In addition, the adhesives also exhibited long-term storage stability and convenient recyclability. These fascinating properties enable adhesives to seal leaky pipelines, repair damaged ships and construct buildings in turbulent seawater. This work may open an avenue for the design of adhesives for seawater environments.

Improved antifouling properties of photobioreactors by surface grafted sulfobetaine polymers.

To improve the antifouling (AF) properties of photobioreactors (PBR) for microalgal cultivation, using trihydroxymethyl aminomethane (tris) as the linking agent, a series of polyethylene (PE) films grafted with sulfobetaine (PE-SBMA) with grafting density ranging from 23.11 to 112 µg cm-2 were prepared through surface-initiated atom transfer radical polymerization (SI-ATRP). It was found that the contact angle of PE-SBMA films decreased with the increase in the grafting density. When the grafting density was 101.33 µg cm-2, it reached 67.27°. Compared with the PE film, the adsorption of protein on the PE-SBMA film decreased by 79.84% and the total weight of solid and absorbed microalgae decreased by 54.58 and 81.69%, respectively. Moreover, the transmittance of PE-SBMA film recovered to 86.03% of the initial value after cleaning, while that of the PE film recovered to only 47.27%. The results demonstrate that the AF properties of PE films were greatly improved on polySBMA-grafted surfaces.

Microstructure-united heterogeneous sodium alginate doped injectable hydrogel for stable hemostasis in dynamic mechanical environments.

Injectable hydrogels that can withstand compressive and tensile forces hold great promise for preventing rebleeding in dynamic mechanical environments after emergency hemostasis of wounds. However, current injectable hydrogels often lack sufficient compressive or tensile performance. Here, a microstructure-united heterogeneous injectable hydrogel (MH) was constructed. The heterogeneous structure endowed MH with a unique "microstructures consecutive transmission" feature, which allowed it to exhibit high compressive and tensile performance simultaneously. In this work, two types of sodium alginate doped hydrogels with different microstructures were physically smashed into microgels, respectively. By mixing the microgels, MH with one micro-pores featured microstructure and another nano-pores featured microstructure can be formed. The obtained MH can withstand both compressive and tensile forces and showed high mechanical performance (compressive modulus: 345.67 ± 10.12 kPa and tensile modulus: 245.19 ± 7.82 kPa). Furtherly, MH was proven to provide stable and sustained hemostasis in the dynamic mechanical environment. Overall, this work provided an effective strategy for constructing injectable hydrogel with high compressive and tensile performance for hemostasis in dynamic mechanical environments.

Hollow poly(MPC-g-PEG-b-PLA) graft copolymer microcapsule as a potential drug carrier.

In this article, an amphiphilic graft copolymer composed of poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) as the hydrophilic backbone, poly(L-lactic acid) (PLA) as the hydrophobic side-chains and polyethylene glycol (PEG) as the spacer was synthesized. Transmission electron microscopy revealed that the graft copolymer could self-assemble into hollow microcapsules when dialyzed in aqueous solution and particle sizes ranged from 200 to 300 nm, while the graft copolymer formed core-shell microspheres with the absence of PEG spacer. X-ray photoelectron microscope showed that MPC polymers were located at the surface of the microcapsules. The amounts of adsorbed bovine serum albumin and Fg on the microcapsules were significantly decreased than that on the conventional PLA particles (74% and 60%, respectively), well indicating the anti-adhesive property of the microcapsules. Paclitaxel was chosen as a prototype anticancer drug for the encapsulation and release studies, the results showed that the drug encapsulation efficiency was 89.3 ± 1.2% and the microcapsules exhibited controlled release behaviour.

Preparation of cellulose nanospheres via combining ZnCl2·3H2O pretreatment and p-toluenesulfonic hydrolysis as a two-step method.

Spherical nanocelluloses, also known as cellulose nanospheres (CNS), have controllable morphology and have shown advantages as green template material, emulsion stabilizer. Herein, CNS were prepared via a new two-step method, first pretreatment of microcrystalline cellulose (MCC) using ZnCl2·3H2O and then acid hydrolysis of regenerated cellulose (RC) via p-toluenesulfonic acid (p-TsOH). The shape, size, crystallinity of MCC were changed, and nubbly RC with smallest size (942 nm) was obtained after 2 h pretreatment by ZnCl2·3H2O. CNS with high 61.3% yield were produced after acid hydrolysis (67 wt% p-TsOH) of RC at 80 °C, 6 h. The analysis of Dynamic Light Scattering (DLS), Transmission Electron Microscopy (TEM) showed that CNS had an average diameter of 347 nm. CNS were present in precipitate after high-speed centrifugation, due to the high Zeta potential of -12 mV and large size. The structure of CNS was tested by Fourier Transfer Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Nuclear Magnetic Resonance (NMR), CNS had high crystallinity (cellulose II) of 61%. Thermal Gravimetric Analysis (TGA) indicated that CNS had high thermal stability (Tonset 303.3 °C, Tmax 332 °C). CNS showed poor re-dispersibility in water/ethanol/THF, 1 wt% CNS could be dissolved in ZnCl2·3H2O. 7.37% rod-like CNC were obtained after 6 h hydrolysis. FTIR proved that p-TsOH was recovered by re-crystallization. This study provided a novel, sustainable two-step method for the preparation of spherical CNS.

PMPC Modified PAMAM Dendrimer Enhances Brain Tumor-Targeted Drug Delivery.

The excellent biocompatibility drug delivery system for effective treatment of glioma is still greatly challenged by the existence of blood-brain barrier, blood-brain tumor barrier, and the tissue toxicity caused by chemotherapy drugs. In this study, poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) is used for the first time for modifying third-generation poly(amidoamine) (PAMAM) to enhance their brain tumor-targeted drug delivery ability as well as simultaneously reducing the toxicity of PAMAM dendrimers and the tissue toxicity of the loaded doxorubicin (DOX). The cytotoxicity, the therapeutic ability in vitro, and the brain tumor-targeted ability of the PMPC modified PAMAM nanoparticles are further studied. Results indicate that PMPC, as a dual-functional modifier, can significantly reduce the cytotoxicity of PAMAM dendrimers, while efficiently target the brain tumor. In addition, the therapeutic effect of DOX-loaded PAMAM-PMPC in mice inoculated with U-87 is also studied in vivo. In comparison with DOX solution, DOX-loaded PAMAM-PMPC alleviates weight loss of tumor-inoculated mice and reduces the cardiotoxicity of DOX. The tumor growth inhibition, in vivo, is significantly increased up to (80.76 ± 1.66)%. In conclusion, this strategy of PMPC dual-functional targeted nanocarrier provides a new method for the delivery of chemotherapeutic drugs to treat glioma.

Development of transferrin functionalized poly(ethylene glycol)/poly(lactic acid) amphiphilic block copolymeric micelles as a potential delivery system targeting brain glioma.

The aim of present study is to conceive a biodegradable poly(ethylene glycol)-polylactide (PEG-PLA) copolymer nanoparticle which can be surface biofunctionalized with ligands via biotin-avidin interactions and used as a potential drug delivery carrier targeting to brain glioma in vivo. For this aim, a new method was employed to synthesize biotinylated PEG-PLA copolymers, i.e., esterification of PEG with biotinyl chloride followed by copolymerization of hetero-biotinylated PEG with lactide. PEG-PLA nanoparticles bearing biotin groups on surface were prepared by nanoprecipitation technique and the functional protein transferrin (Tf) were coupled to the nanoparticles by taking advantage of the strong biotin-avidin complex formation. The flow cytometer measurement demonstrated the targeting ability of the nanoparticles to tumor cells in vitro, and the fluorescence microscopy observation of brain sections from C6 glioma tumor-bearing rat model gave the intuitive proof that Tf functionalized PEG-PLA nanoparticles could penetrate into tumor in vivo.

Star-branched amphiphilic PLA-b-PDMAEMA copolymers for co-delivery of miR-21 inhibitor and doxorubicin to treat glioma.

The combined treatment of chemotherapeutant and microRNA (miR) has been proven to be a viable strategy for enhancing chemosensitivity due to its synergistic effect for tumor therapy. However, the co-delivery of drugs and genes remains a major challenge as they lack efficient co-delivery carriers. In this study, three amphiphilic star-branched copolymers comprising polylactic acid (PLA) and polydimethylaminoethyl methacrylate (PDMAEMA) with AB3, (AB3)2,and (AB3)3 molecular architectures were synthesized respectively by a combination of ring-opening polymerization, atom transfer radical polymerization, and click chemistry via an "arm-first" approach. The star copolymers possessed a low critical micelle concentration (CMC) and formed nano-sized micelles with positive surface charges in water as well as exhibiting a much lower cytotoxicity than PEI 25 kDa. Nevertheless, their gene transfection efficiency and tumor inhibition ability showed a remarkable dependence on their molecular architecture. The (AB3)3 architecture micelle copolymer exhibited the highest transfection efficiency, about 2.5 times higher than PEI. In addition, after co-delivering DOX and miR-21 inhibitor (miR-21i) into LN229 glioma cells, the micelles could mediate escaping miR-21i from lysosome degradation and the release of DOX to the nucleus, which significantly decreased the miR-21 expression. Moreover, co-delivery of DOX and miR-21i surprisingly exhibited an anti-proliferative efficiency compared with DOX or the miR-21i treatment alone. These results demonstrated that amphiphilic star-branched copolymers are highly promising for their combinatorial delivery of genes and hydrophobic therapeutants.