A composite of AgNPs and lignin porous microspheres via in-situ reduction of Ag+ and its catalytic performance.

Despite the widespread utilization of nano silver composites in the domain of catalytic hydrogenation of aromatic pollutants in wastewater, certain challenges persist, including the excessive consumption of chemical reagents during the preparation process and the difficulty in recycling. In this study, silver ions were reduced in-situ by taking advantage of the adsorptive and reducing capacities of hydroxyls and amino groups on lignin porous microspheres (LPMs) under mild ultrasonic conditions, and lignin porous microspheres loaded with silver nanoparticles (Ag@LPMs) were conveniently prepared. Ag@LPMs had excellent catalytic and cycling performances for p-nitrophenol (4-NP), methylene blue (MB) and methyl orange (MO). The 4-NP could be completely reduced to 4-AP within 155 s under the catalysis of Ag@LPMs, with a pseudo-first-order kinetic constant of 1.28 min-1. Furthermore, Ag@LPMs could still complete the catalytic reduction of 4-NP within 10 min after five cycles. Ag@LPMs with the particle size ranging from 100 to 200 µm conferred ease of recycling, and the porous structure effectively resolved the issue of sluggish mass transfer encountered during the catalytic process. At the same time, the binding force of nano silver and LPMs obtained by ultrasonic was stronger than that of heating, so the materials prepared by ultrasonic had better cycling performance. Silver ions concentration and pH value in the preparation process affected the catalytic performance of Ag@LPMs, 50 mmol/L Ag+ and pH value of 7 turned out to be the optimization conditions.

Synthesis of temperature and pH responsive lignin-grafted sulfobetaine for efficiently recycling cellulase.

Recycling cellulase can reduce the cost of lignocellulosic enzymatic hydrolysis. Here, a lignin-grafted sulfobetaine (LSB) was first synthesized by grafting sulfobetaine (SB) on enzymatic hydrolysis lignin (EHL). LSB had a sensitive response of pH and temperature. LSB dissolved under the conditions of lignocellulosic enzymatic hydrolysis (pH 5.0, 50 °C). After hydrolysis, LSB co-precipitated with cellulase when lowering pH of the hydrolysate to 4.0 and cooling to 25 °C. When 3.0 g/L LSB-100 was added to the hydrolysis system of corncob residue (CCR), 70 % of amount of cellulase was saved. LSB had a remarkable response and stronger cellulase recovery capacity. This was attributed that carboxylate radical in LSB was protonated, and positive and negative ions of SB associated to form salt at 25 °C. This work provides a new idea for reducing the cost for preparing fermentable sugars from lignocellulose, and increasing the added value of EHL.

One-pot preparation of magnetic nitrogen-doped porous carbon from lignin for efficient and selective adsorption of organic pollutants.

Organic pollutants pose a serious threat to water environment, thus it is essential to develop high-performance adsorbent to remove them from wastewater. Herein, nitrogen-doped magnetic porous carbon (M-PLAC) with three-dimensional porous structure was synthesized from lignin to adsorb methylene blue (MB) and tetracycline (TC) in wastewater. The calculated equilibrium adsorption amount by M-PLAC for MB and TC was 645.52 and 1306.00 mg/g, respectively. The adsorption of MB and TC on M-PLAC conformed to the pseudo-second-order kinetic model. The removal of MB by M-PLAC showed fast and efficient characteristics and exhibited high selectivity for TC in a binary system. In addition, M-PLAC was suitable for a variety of complex water environments and had good regeneration performance, demonstrating potential advantages in practical wastewater treatment. The organic pollutant adsorption by M-PLAC was attributed to electrostatic interaction, hole filling effect, hydrogen bonding, and the π-π interaction.

Lignin-grafted quaternary ammonium phosphate with temperature and pH responsive behavior for improved enzymatic hydrolysis and cellulase recovery.

The cost of lignocellulosic enzymatic hydrolysis was reduced by enhancing enzymatic hydrolysis and recycling cellulase. Lignin-grafted quaternary ammonium phosphate (LQAP) with sensitive temperature and pH response, was obtained by grafting quaternary ammonium phosphate (QAP) onto enzymatic hydrolysis lignin (EHL). LQAP dissolved under the hydrolysis condition (pH 5.0, 50 °C) and enhanced the hydrolysis. After hydrolysis, LQAP and cellulase co-precipitated by the hydrophobic binding and electrostatic attraction, when lowering pH to 3.2, and cooling to 25 °C. LQAP had significant performances of pH-UCST response, enzymatic hydrolysis enhancement and cellulase recovery at the same time. When 3.0 g/L LQAP-100 was added to the system of corncob residue, SED@48 h increased from 62.6 % to 84.4 %, and 50 % of amount of cellulase was saved. Precipitation of LQAP at low temperature was mainly attributed to the salt formation of positive and negative ions in QAP; LQAP enhanced the hydrolysis for its ability to decrease the ineffective adsorption of cellulase by forming a hydration film on lignin and through the electrostatic repulsion. In this work, a lignin amphoteric surfactant with temperature response, was used to enhance hydrolysis and recover cellulase. This work will provide a new idea for reducing the cost of lignocellulose-based sugar platform technology, and high-value utilization of industrial lignin.

Synthesis of bifunctional thermal response promoters for improved high-solids enzymatic hydrolysis of corncob residues.

The enzymatic hydrolysis cost of lignocellulose can be reduced by improving enzymatic hydrolysis and recycling cellulase by adding additives. A series of copolymers P(SSS-co-SPE) (PSSPs) were synthesized using sodium p-styrene sulfonate (SSS) and sulfobetaine (SPE) as monomers. PSSP exhibited upper critical solution temperature response. PSSP with high molar ratio of SSS displayed more significant improved hydrolysis performance. When 10.0 g/L PSSP5 was added to the hydrolysis system of corncob residues, and substrate enzymatic digestibility at 72 h (SED@72 h) increased by 1.4 times. PSSP with high molecular weight and moderate molar ratio of SSS, had significant temperature response, enhanced hydrolysis, and recovering cellulase properties. For high-solids hydrolysis of corncob residues, SED@48 h increased by 1.2 times with adding 4.0 g/L of PSSP3. Meanwhile, 50% of cellulase amount was saved at the room temperature. This work provides a new idea for reducing the hydrolysis cost of lignocellulose-based sugar platform technology.

Unveiling the role of long-range and short-range forces in the non-productive adsorption between lignin and cellulases at different temperatures.

Quantitatively understanding of interaction mechanism between lignin and cellulases is essential for the efficient improvement of lignocellulose enzymatic hydrolysis. However, the individual contribution of multiple forces between lignin and cellulases to the non-productive adsorption of enzymes still remains deeply ambiguous, especially in situations of near enzymatic hydrolysis temperatures. Herein, atomic force microscopy (AFM) and computational simulations were utilized to quantitatively analyze the intermolecular forces between lignin and enzyme at 25 °C and 40 °C. Our results unveiled that an increase in temperature obviously improved adsorption capacity and total intermolecular forces between lignin and cellulases. This positive relationship mainly comes from the increase in the decay length of hydrophobic forces for lignin-cellulases when temperature increases. Different from the hydrophobic interaction which provides long-range part of attractions, van der Waals forces dominate the intermolecular force only at approaches < 2 nm. On the other hand, electrostatic forces exhibited repulsive effects, and its intensity and distance were limited due to the low surface potential of cellulases. Short-range forces including hydrogen bonding (main) and π-π stacking (minor) stabilize the non-specific binding of enzymes to lignin, but increasing temperature reduces hydrogen bond number. Therefore, the relative contribution of long-range forces increased markedly at higher temperatures, which benefits protein capture and brings lignin and cellulase close together. Finally, the structure-activity relationships between lignin physicochemical properties and its inhibitory effect to enzymes indicated that hydrophobic interactions, hydrogen bonding, and steric effects drive the final adsorption capacity and glucose yields. This work provides quantitative and basic insights into the mechanism of lignin-cellulase interfacial interactions and guides design of saccharification enhancement approaches.

Preparation, characterization, and adsorption performance of porous polyamine lignin microsphere.

In this study, a porous polyamine lignin microsphere (PPALM) was prepared through the inverse suspension polymerization combined with freeze-drying, during which sodium lignosulfonate and polyetheramine (PEA) were crosslinked with epichlorohydrin (ECH) as the cross-linker. By adjusting the amount of ECH and PEA, the optimized PPALM exhibited suitable crosslinking degree, ensuring a balance of framework flexibility and rigidity, thereby facilitating the formation of abundant and fine pores. PPALM demonstrated good mechanical properties comparable to commercial sulfonated polystyrene cationic resin, with a porosity of 61.12 % and an average pore size of 283.51 nm. The saturation adsorption capacity of PPALM for Pb2+ was measured to be 156.82 mg/g, and it remained above 120 mg/g after five cycles of regeneration. Particularly, the concentration of 50 mg/L Pb2+ solution could be reduced to 0.98 mg/L after flowing through the PPALM packed bed, indicating the great potential of PPALM for application in wastewater treatment.

Boosting Hydrolysis of Cellulose at High Temperature by ß-Glucosidase Induced Metal-Organic Framework In-Situ Co-Precipitation Encapsulation.

Due to the poor enzyme thermal stability, the efficient conversion of high crystallinity cellulose into glucose in aqueous phase over 50 °C is challenging. Herein, an enzyme-induced MOFs encapsulation of ß-glucosidase (ß-G) strategy was proposed for the first time. By using various methods, including SEM, XRD, XPS, NMR, FTIR and BET, the successful preparation of a porous channel-type flower-like enzyme complex (ß-G@MOFs) was confirmed. The prepared enzyme complex (ß-G@MOFs) materials showed improved thermal stability (from 50 °C to 100 °C in the aqueous phase) and excellent resistance to ionic liquids (the reaction temperature was as high as 110 °C) compared to the free enzyme (ß-G). Not only the catalytic hydrolysis of cellulose by single enzyme (ß-G) in ionic liquid was realized, but also the high-temperature continuous reaction performance of the enzyme was significantly improved. Benefiting from the significantly improved heat resistance, the ß-G@MOFs exhibited 32.1 times and 34.2 times higher enzymatic hydrolysis rate compared to ß-G for cellobiose and cellulose substrates, respectively. Besides, the catalytic activity of ß-G@MOFs was retained up to 86 % after five cycles at 110 °C. This was remarkable because the fixation of the enzyme by the MOFs ensured that the folded structure of the enzyme would not expand at high temperatures, allowing the native conformation of the encapsulated protein well-maintained. Furthermore, we believe that this structural stability was caused by the confinement of flower-like porous MOFs.

A fast-response biomimetic phototropic material built by a coordination-assisted photothermal domino strategy.

Fast-response artificial phototropic materials are a promising tool for solar energy utilisation, yet their preparation remains challenging. Herein, we report the so-called photothermal domino strategy for constructing fast-response artificial phototropic materials. In this strategy, photothermal generation, heat conduction and thermal actuation are sequentially optimised by a coordination effect. For the first time, lignin-based organic radicals boosted by this coordination effect are used to significantly enhance photothermal conversion. Interfacial coordination bonds between lignin and an elastomer matrix promote interfacial heat conduction. Light-stimulated thermal actuation is significantly improved by coordination-assisted mechanical training. The prepared biomimetic phototropic material exhibits excellent phototropic ability, with a 2.5 s light-tracking process, showing great application potential for efficient solar energy utilisation. This strategy shows great significance for fabricating high-performance intelligent phototropic materials using widely available, green raw materials.

Biomimetic high performance artificial muscle built on sacrificial coordination network and mechanical training process.

Artificial muscle materials promise incredible applications in actuators, robotics and medical apparatus, yet the ability to mimic the full characteristics of skeletal muscles into synthetic materials remains a huge challenge. Herein, inspired by the dynamic sacrificial bonds in biomaterials and the self-strengthening of skeletal muscles by physical exercise, high performance artificial muscle material is prepared by rearrangement of sacrificial coordination bonds in the polyolefin elastomer via a repetitive mechanical training process. Biomass lignin is incorporated as a green reinforcer for the construction of interfacial coordination bonds. The prepared artificial muscle material exhibits high actuation strain (>40%), high actuation stress (1.5 MPa) which can lift more than 10,000 times its own weight with 30% strain, characteristics of excellent self-strengthening by mechanical training, strain-adaptive stiffening, and heat/electric programmable actuation performance. In this work, we show a facile strategy for the fabrication of intelligent materials using easily available raw materials.

Effects of sacrificial coordination bonds on the mechanical performance of lignin-based thermoplastic elastomer composites.

In this work, the coordination-based energy sacrificial bonds have been constructed in the interphase between lignin and polyolefin elastomer to prepare high performance lignin-based thermoplastic elastomers (TPEs). The strength and toughness of lignin-based TPEs can be adjusted by choosing different nitrogen heterocyclic compounds as reactive assistants and Fe3+ or Zn2+ as metal coordination centers. It was demonstrated that 3-Amino-1,2,4-triazole with three nitrogen atoms in the heterocyclic ring and one nitrogen branch chain could form the most efficient coordination bond system and generate the best mechanical performance. The system with ferric iron as coordination center exhibited better enhancement effect than divalent zinc. By adjusting the nitrogen-containing reactive additives or metal salts as coordination centers, the mechanical performance of the lignin-based TPE can be regulated, which provides a method for making green bio-composites with good strength and toughness, and also promotes the high value utilization of lignin in polymer materials.

Direct Construction of Catechol Lignin for Engineering Long-Acting Conductive, Adhesive, and UV-Blocking Hydrogel Bioelectronics.

Long-active conductivity, adhesiveness, and environmental stability are essential in the applications of hydrogel electronics. Integrating different functional materials into one system suffers from compatibility and cost problems. Inspired by the unique o-methoxyl structure in polyphenol lignin and its binding role in plants, catechol lignin (DAL) is constructed by one-step demethylation, which endows the lignin with a mussel-like bioadhesion, good reducibility, as well as a high ultraviolet absorption. The DAL is then applied to reduced graphene oxide, and the products-the oxidized DAL and the reduced graphene oxide mixture (DAL/rGO) is added into a sodium alginate/polyacrylamide (SA/PAM) double network hydrogel. Based on the Schiff base reaction between the quinone of the oxidized DAL and the amino of the skin, the DAL/rGO incorporated hydrogels could stably adhere to the skin, and sensitively respond to physiological signals. In addition, the DAL could provide the hydrogels with long-active sunscreen property when applied to real skin. These DAL based hydrogels have potential for on-skin sensing and outdoor sport equipment.

Using highly recyclable sodium caseinate to enhance lignocellulosic hydrolysis and cellulase recovery.

Most additives that capable of enhancing enzymatic hydrolysis of lignocellulose are petroleum-based, which are not easy to recycle with poor biodegradability. In this work, highly recyclable and biodegradable sodium caseinate (SC) was used to enhance lignocellulosic hydrolysis with improved cellulase recyclability. When the pH decreased from 5.5 to 4.8, more than 96% SC could be precipitated from the solution and recovered. Adding SC increased enzymatic digestibility of dilute acid pretreated eucalyptus (Eu-DA) from 39.5% to 78.2% under Eu-DA loading of 10 wt% and pH = 5.5, and increase cellulase content in 72 h hydrolysate from only 15.2% of the original to 60.0%, which facilitated the recovery of cellulases through re-adsorption by fresh substrates. With multiple cycles of re-adsorption, application of SC not only increased the sugar yield of Eu-DA by 95.5%, but also reduced cellulase loading by 40%.

Effect of the isoelectric point of pH-responsive lignin-based amphoteric surfactant on the enzymatic hydrolysis of lignocellulose.

The isoelectric point (pI) of lignin-based surfactant is an important factor in the enhancement on the enzymatic hydrolysis of lignocellulose. In this work, lignin carboxylate (LC) and quaternary ammonium lignin carboxylates (LCQ-x, x%: the mass ratio of quaternizing agent to enzymatic hydrolysis lignin) with different isoelectric points were synthesized. LC or LCQ-x with pI significantly lower or higher than 4.8 reduced the non-productive adsorption of cellulase on lignin, but for the significant inhibitory effect on cellulase activity, their enhancements on the enzymatic hydrolysis of lignocellulose were not remarkable. However, LCQ-x with pI around 4.8 preserved the cellulase activity, and significantly reduced the non-productive adsorption of cellulase, therefore remarkably enhanced the enzymatic hydrolysis. 2 g/L LC, LCQ-40 (pI = 5.0) and LCQ-100 (pI = 9.2) increased the enzymatic digestibility of pretreated eucalyptus from 35.2% to 53.4%, 95.3% and 60.4% respectively. In addition, for the excellent pH-response performance, LCQ could be efficiently recovered after enzymatic saccharification.

Enhancement and Mechanism of a Lignin Amphoteric Surfactant on the Production of Cellulosic Ethanol from a High-Solid Corncob Residue.

A lignin amphoteric surfactant and betaine could enhance the enzymatic hydrolysis of lignocellulose and recover cellulase. The effects of lignosulfonate quaternary ammonium salt (SLQA) and dodecyl dimethyl betaine (BS12) on enzymatic hydrolysis digestibility, ethanol yield, yeast cell viability, and other properties of high-solid enzymatic hydrolysis and fermentation of a corncob residue were studied in this research. The results suggested that SLQA and 1 g/L BS12 effectively improved the ethanol yield through enhancing enzymatic hydrolysis. SLQA had no significant effect on the yeast cell membrane and glucose fermentation. However, 5 g/L BS12 reduced the ethanol yield as a result of the fact that 5 g/L BS12 damaged the yeast cell membrane and inhibited the conversion of glucose to ethanol. Our research also suggested that 1 g/L BS12 enhanced the ethanol yield of corncob residue fermentation, which was attributed to the fact that lignin in the corncob adsorbed BS12 and decreased its concentration in solution to a safe level for the yeast.

Effect of lignin-based amphiphilic polymers on the cellulase adsorption and enzymatic hydrolysis kinetics of cellulose.

The origin, amount, hydrophilicity, charge, molecular weight and its distribution of lignin have significant influences on the enzymatic hydrolysis of lignocellulose. The enzymatic hydrolysis of lignocellulose was essentially enhanced by lignin-based polyoxyethylene ether (EHL-PEG), whereafter followed by PEG4600 and lignosulfonate (LS). The effect of LS, EHL-PEG and PEG4600 on the adsorption and enzymatic hydrolysis kinetics of cellulase on the gold surface and cellulose film was investigated by Quartz Crystal Microbalance with dissipation monitoring (QCM-D). Results showed that the interaction of LS or EHL-PEG with cellulase was electrostatic attractive and hydrophobic effect, respectively, and formed hydrophilic cellulase aggregates. LS-Cellulase peeled off the cellulose film layer by layer, while the hydrophobic phenylpropane structure of EHL-PEG-Cellulase acted as a cellulose binding domain to hydrolysis cellulose through "Hollow" effect and made cellulose become more loose and swollen. At last, a strategy to enhance the enzymatic hydrolysis of lignocellulose by lignin-based amphiphilic polymers was proposed as well.

Nonionic surfactants enhanced enzymatic hydrolysis of cellulose by reducing cellulase deactivation caused by shear force and air-liquid interface.

Effects of nonionic surfactants on enzymatic hydrolysis of Avicel at different agitation rates and solid loadings and the mechanism were studied. Nonionic surfactants couldn't improve the enzymatic hydrolysis efficiency at 0 and 100rpm but could enhance the enzymatic hydrolysis significantly at high agitation rate (200 and 250rpm). Cellulase was easily deactivated at high agitation rate and the addition of nonionic surfactants can protect against the shear-induced deactivation, especially when the cellulase concentration was low. When 25mg protein/L of cellulase solution was incubated at 200rpm for 72h, the enzyme activity increased from 36.0% to 89.5% by adding PEG4600. Moreover nonionic surfactants can compete with enzyme in air-liquid interface and reduce the amount of enzyme exposed in the air-liquid interface. The mechanism was proposed that nonionic surfactants could enhance the enzymatic hydrolysis of Avicel by reducing the cellulase deactivation caused by shear force and air-liquid interface.

Preparation of Lignin/Sodium Dodecyl Sulfate Composite Nanoparticles and Their Application in Pickering Emulsion Template-Based Microencapsulation.

Lignin is a vastly underutilized biomass resource. The preparation of water-dispersed lignin nanoparticles is an effective way to realize the high-value utilization of lignin. However, the currently reported preparation methods of lignin nanoparticles still have some drawbacks, such as the requirement for toxic organic solvent or chemical modification, complicated operation process, and poor dispersibility. Here, lignin/sodium dodecyl sulfate (SDS) composite nanoparticles (LSNPs) with outstanding water dispersibility and a size range of 70-200 nm were facilely prepared via acidifying the mixed basic solution of alkaline lignin and SDS. No harsh chemical was needed. The formation mechanism was systematically studied. Results indicated that the LSNPs were obtained by acid precipitation of the mixed micelles formed by the self-assembly of lignin and SDS. In addition, on the basis of the LSNP-stabilized Pickering emulsions, lignin/polyurea composite microcapsules combining the excellent chemical stability of a synthetic polyurea shell with the fantastic antiphotolysis and antioxidant properties of lignin were successfully prepared.

Using temperature-responsive zwitterionic surfactant to enhance the enzymatic hydrolysis of lignocelluloses and recover cellulase by cooling.

Some zwitterionic surfactants exhibit upper critical solution temperature (UCST) in aqueous solutions. For the zwitterionic surfactant solution mixed with cellulase, when its temperature is below UCST, the cellulase can be recovered by coprecipitation with zwitterionic surfactant. In this work, 3-(Hexadecyldimethylammonio) propanesulfonate (SB3-16) was selected to enhance the enzymatic hydrolysis of lignocelluloses and recover the cellulase. After adding 2mmol/L of SB3-16, the enzymatic digestibility of eucalyptus pretreated by dilute acid (Eu-DA) and by sulfite (Eu-SPORL) increased from 27.9% and 35.1% to 72.6% and 89.7%, respectively. The results showed that SB3-16 could reduce the non-productive adsorption of cellulase on hydrophobic interface, while it did not significantly inhibit the activity of cellulase. For the solution contained 1wt% SB3-16 and 200mg protein/L CTec2 cellulase, 55.2% of protein could be recovered by cooling. The filter paper activity of the recovered cellulase was 1.93FPU/mg protein, which was 95.8% of its initial activity.

Using polyvinylpyrrolidone to enhance the enzymatic hydrolysis of lignocelluloses by reducing the cellulase non-productive adsorption on lignin.

Polyvinylpyrrolidone (PVP) is an antifouling polymer to resist the adsorption of protein on solid surface. Effects of PVP on the enzymatic hydrolysis of pretreated lignocelluloses and its mechanism were studied. Adding 1g/L of PVP8000, the enzymatic digestibility of eucalyptus pretreated by dilute acid (Eu-DA) was increased from 28.9% to 73.4%, which is stronger than the classic additives, such as PEG, Tween and bovine serum albumin. Compared with PEG4600, the adsorption of PVP8000 on lignin was larger, and the adsorption layer was more stable and hydrophilic. Therefore, PVP8000 reduced 73.1% of the cellulase non-productive adsorption on lignin and enhanced the enzymatic hydrolysis of lignocelluloses greatly.