Competitive Adsorption of a Monoclonal Antibody and Nonionic Surfactant at the PDMS/Water Interface.

Interfacial adsorption of monoclonal antibodies (mAbs) can cause structural deformation and induce undesired aggregation and precipitation. Nonionic surfactants are often added to reduce interfacial adsorption of mAbs which may occur during manufacturing, storage, and/or administration. As mAbs are commonly manufactured into ready-to-use syringes coated with silicone oil to improve lubrication, it is important to understand how an mAb, nonionic surfactant, and silicone oil interact at the oil/water interface. In this work, we have coated a polydimethylsiloxane (PDMS) nanofilm onto an optically flat silicon substrate to facilitate the measurements of adsorption of a model mAb, COE-3, and a commercial nonionic surfactant, polysorbate 80 (PS-80), at the siliconized PDMS/water interface using spectroscopic ellipsometry and neutron reflection. Compared to the uncoated SiO2 surface (mimicking glass), COE-3 adsorption to the PDMS surface was substantially reduced, and the adsorbed layer was characterized by the dense but thin inner layer of 16 Å and an outer diffuse layer of 20 Å, indicating structural deformation. When PS-80 was exposed to the pre-adsorbed COE-3 surface, it removed 60 wt % of COE-3 and formed a co-adsorbed layer with a similar total thickness of 36 Å. When PS-80 was injected first or as a mixture with COE-3, it completely prevented COE-3 adsorption. These findings reveal the hydrophobic nature of the PDMS surface and confirm the inhibitory role of the nonionic surfactant in preventing COE-3 adsorption at the PDMS/water interface.

Effects of Conventional Surfactants on the Activity of Designed Antimicrobial Peptide.

In this article, the interaction between a designed antimicrobial peptide (AMP) G(IIKK)3I-NH2 (G3) and four typical conventional surfactants (sodium dodecyl sulfonate (SDS), hexadecyl trimethyl ammonium bromide (C16TAB), polyoxyethylene (23) lauryl ether (C12EO23), and tetradecyldimethylamine oxide (C14DMAO)) has been studied through surface tension measurement and circular dichroism (CD) spectroscopy. The antimicrobial activities of AMP/surfactant mixtures have also been studied with Gram-negative Escherichia coli, Gram-positive Staphylococcus aureus, and the fungus Candida albicans. The cytotoxicity of the AMP/surfactant mixtures has also been assessed with NIH 3T3 and human skin fibroblast (HSF) cells. The surface tension data showed that the AMP/SDS mixture was much more surface-active than SDS alone. CD results showed that G3 conformation changed from random coil, to ß-sheet, and then to α-helix with increasing SDS concentration, showing a range of structural transformation driven by the different interactions with SDS. The antimicrobial activity of G3 to Gram-negative and Gram-positive bacteria decreased in the presence of SDS due to the strong interaction of electrostatic attraction between the peptide and the surfactant. The interactions between G3 and C16TAB, C12EO23, and C14DMAO were much weaker than SDS. As a result, the surface tension of surfactants with G3 did not change much, neither did the secondary structures of G3. The antimicrobial activities of G3 were little affected in the presence of C12EO23, slightly improved by C14DMAO, and clearly enhanced by cationic surfactant C16TAB due to its strong cationic and antimicrobial nature, consistent with their surface physical activities as binary mixtures. Although AMP G3 did not show activity to fungus, the mixtures of AMP/C16TAB and AMP/C14DMAO could kill C. albicans at high surfactant concentrations. The mixtures had rather high cytotoxicity to NIH 3T3 and HSF cells although G3 is nontoxic to cells. Cationic AMPs can be formulated with nonionic, cationic, and zwitterionic surfactants during product development, but care must be taken when AMPs are formulated with anionic surfactants, as the strong electrostatic interaction may undermine their antimicrobial activity.

Modulation of Antimicrobial Peptide Conformation and Aggregation by Terminal Lipidation and Surfactants.

The function and properties of peptide-based materials depend not only on the amino acid sequence but also on the molecular conformations. In this paper, we chose a series of peptides Gm(XXKK)nX-NH2 (m = 0, 3; n = 2, 3; X = I, L, and V) as the model molecules and studied the conformation regulation through N-terminus lipidation and their formulation with surfactants. The structural and morphological transition of peptide self-assemblies have also been investigated via transmission electron microscopy, atomic force microscopy, circular dichroism spectroscopy, and small-angle neutron scattering. With the terminal alkylation, the molecular conformation changed from random coil to ß-sheet or α-helix. The antimicrobial activities of alkylated peptide were different. C16-G3(IIKK)3I-NH2 showed antimicrobial activity against Streptococcus mutans, while C16-(IIKK)2I-NH2 and C16-G3(IIKK)2I-NH2 did not kill the bacteria. The surfactant sodium dodecyl sulfonate could rapidly induce the self-assemblies of alkylated peptides (C16-(IIKK)2I-NH2, C16-G3(IIKK)2I-NH2, C16-G3(VVKK)2V-NH2) from nanofibers to micelles, along with the conformation changing from ß-sheet to α-helix. The cationic surfactant hexadecyl trimethyl ammonium bromide made the lipopeptide nanofibers thinner, and nonionic surfactant polyoxyethylene (23) lauryl ether (C12EO23) induced the nanofibers much more intensively. Both the activity and the conformation of the α-helical peptide could be modulated by lipidation. Then, the self-assembled morphologies of alkylated peptides could also be further regulated with surfactants through hydrophobic, electrostatic, and hydrogen-bonding interactions. These results provided useful strategies to regulate the molecular conformations in peptide-based material functionalization.

Reversible Thermoresponsive Peptide-PNIPAM Hydrogels for Controlled Drug Delivery.

Mixed thermoreversible gels were successfully fabricated by the addition of a thermosensitive polymer, poly(N-isopropylacrylamide) (PNIPAM), to fibrillar nanostructures self-assembled from a short peptide I3K. When the temperature was increased above the lower critical solution temperature of the PNIPAM, the molecules collapsed to form condensed globular particles, which acted as cross-links to connect different peptide nanofibrils and freeze their movements, resulting in the formation of a hydrogel. Since these processes were physically driven, such hydrogels could be reversibly switched between the sol and gel states as a function of temperature. As a model peptide, I3K was formulated with PNIPAM to produce a thermoreversible sol-gel system with a transition temperature of ∼33 °C, which is just below the body temperature. The antibacterial peptide of G(IIKK)3I-NH2 could be conveniently encapsulated in the hydrogel by the addition of the solution at lower temperatures in the sol phase and then increasing the temperature to be above 33 °C for gelation. The hydrogel gave a sustained and controlled linear release of G(IIKK)3I-NH2 over time. Using the peptide nanofibrils as three-dimensional scaffolds, such thermoresponsive hydrogels mimic the extracellular matrix and could potentially be used as injectable hydrogels for minimally invasive drug delivery or tissue engineering.

Patterned Thermoresponsive Microgel Surfaces to Control Cell Detachment.

The aim of this work is to examine how adhered individual cells could detach from the patterned, discontinuous thermoresponsive coating substrate and how different patterns in the form of thermoresponsive squares and gaps would affect cell detachment. Microgels prepared from copolymerization of N-isopropylacrylamide and styrene (pNIPAAmSt) were spin-coated on polyethylenimine (PEI) precoated glass coverslips to form a uniform microgel monolayer; then a surface-moisturized PMDS stamp was used to contact the microgel monolayer at room temperature. The thin layer of water on the PDMS stamp surface worked as an ink to penetrate the microgels so that any microgels in direct contact with the wet stamp surface became swollen and could be peeled away, while uncontacted microgels formed patterns. Using this method, various patterns with different thermo-island diameters and gaps could be fabricated. NIH3T3 fibroblast cells were then cultured on these patterns to study their detachment behavior. It was found that cells could detach not only from these discontinuous thermoresponsive coatings, but also from the patterned surfaces with the thermoresponsive area being as low as 20% of the cell spread area.

Thermoresponsive microgel films for harvesting cells and cell sheets.

This work reports the formation of thermoresponsive poly(N-isopropylacrylamide-co-styrene) (PNIPAAmSt) microgel films and their use for cell growth and detachment via temperature stimuli. Thermoresponsive surface films can be conveniently produced by spin-coating or drop-coating of PNIPAAmSt microgel dispersions onto substrates such as glass coverslips, cell culture plates, and flasks, making this technique widely accessible. The thickness, stability, and reversibility of the PNIPAAmSt films coated on silicon wafers with respect to temperature switching were examined by spectroscopic ellipsometry (SE) and atomic force microscopy (AFM). The results unraveled the direct link between thermoreversibility and changes in film thickness and surface morphology, showing reversible hydration and dehydration. Under different coating conditions, well-packed microgel monolayers could be utilized for effective cell recovery and harvesting. Furthermore, cell adhesion and detachment processes were reversible and there was no sign of loss of cell viability during repeated surface attachment, growth, and detachment, showing a mild interaction between cells and thermoresponsive surface. More importantly, there was little deterioration of the packing of the thermoresponsive films or any major loss of microgel particles during reuse, indicating their robustness. These PNIPAAmSt microgel films thus open up a convenient interfacial platform for cell and cell sheet harvesting while avoiding the damage of enzymatic cleavage.

Improving genetic immobilization of a cellulase on yeast cell surface for bioethanol production using cellulose.

In this study, Saccharomyces cerevisiae was genetically engineered to harbor the capability of utilizing celluloses for bioethanol production by displaying active cellulolytic enzymes on the cell surface. An endo-1,4-ß-glucanase gene egX was cloned from Bacillus pumilus C-9 and its expression products, the EGX cellulases, were displayed on the cell surface of S. cerevisiae by fusing egX with aga2 that encodes the binding subunit of the S. cerevisiae cell wall protein α-agglutinin. To achieve high gene copies and stability, multicopy integration was obtained by integrating the fusion aga2-egX gene into the rDNA region of the S. cerevisiae chromosome. To achieve high expression and surface display efficiency, the aga2-egX gene was expressed under the control of a strong promoter. The presence of the enzymatically active cellulase fusion proteins on the S. cerevisiae cell surface was verified by carboxymethyl cellulase activity assay and immunofluorescence microscopy. This work presented a promising strategy to genetically engineer yeasts to perform efficient fermentation of cellulosic materials for bioethanol production.

Controllable stabilization of poly(N-isopropylacrylamide)-based microgel films through biomimetic mineralization of calcium carbonate.

Two types of thermoresponsive microgels, poly(N-isopropylacrylamide) (PNIPAM) microgels and poly(N-isopropylacrylamide-co-acrylic acid) (PNIPAMAC) microgels were synthesized and used as templates for the mineralization of amorphous calcium carbonate (ACC) by diffusion of CO(2) vapor under ambient conditions. Thermosensitive PNIPAM/CaCO(3) hybrid macroscopic hydrogels and micrometer-sized PNIPAMAC/CaCO(3) hybrid microgels were controllably obtained and different mineralization mechanistic processes were proposed. The impact of the loaded CaCO(3) on the size, morphology, stability, and thermosensitivity of the microgels was also analyzed. PNIPAM/CaCO(3) hybrid macrogels had a slight decrease in thermoresponsive phase transition temperature, while PNIPAMAC/CaCO(3) hybrid microgels showed a clear increase in phase transition temperature. The difference reflected different amount and location of ACC in the gel network, causing different interactions with polymer chains. The PNIPAMAC/CaCO(3) microgels formed stable monolayer films on bare silica wafers and glass coverslips upon drying. The microgel films could facilitate the attachment and growth of 3T3 fibroblast cells and their subsequent detachment upon temperature drop from 37 °C to the ambient condition around 20 °C, thus, offering a convenient procedure for cell harvesting.

Aggregated Amphiphilic Antimicrobial Peptides Embedded in Bacterial Membranes.

Molecular dynamics (MD) simulations, stochastic optical reconstruction microscopy (STORM), and neutron reflection (NR) were combined to explore how antimicrobial peptides (AMPs) can be designed to promote the formation of nanoaggregates in bacterial membranes and impose effective bactericidal actions. Changes in the hydrophobicity of the designed AMPs were found to have a strong influence on their bactericidal potency and cytotoxicity. G(IIKK)3I-NH2 (G3) achieved low minimum inhibition concentrations (MICs) and effective dynamic kills against both antibiotic-resistant and -susceptible bacteria. However, a G3 derivative with weaker hydrophobicity, KI(KKII)2I-NH2 (KI), exhibited considerably lower membrane-lytic activity. In contrast, the more hydrophobic G(ILKK)3L-NH2 (GL) peptide achieved MICs similar to those observed for G3 but with worsened hemolysis. Both the model membranes studied by Brewster angle microscopy, zeta potential measurements, and NR and the real bacterial membranes examined with direct STORM contained membrane-inserted peptide aggregates upon AMP exposure. These structural features were well supported by MD simulations. By revealing how AMPs self-assemble in microbial membranes, this work provides important insights into AMP mechanistic actions and allows further fine-tuning of antimicrobial potency and cytotoxicity.

How do Self-Assembling Antimicrobial Lipopeptides Kill Bacteria?

Antimicrobial peptides are promising alternatives to traditional antibiotics. A group of self-assembling lipopeptides was formed by attaching an acyl chain to the N-terminus of α-helix-forming peptides with the sequence Cx-G(IIKK)yI-NH2 (CxGy, x = 4-12 and y = 2). CxGy self-assemble into nanofibers above their critical aggregation concentrations (CACs). With increasing x, the CACs decrease and the hydrophobic interactions increase, promoting secondary structure transitions within the nanofibers. Antimicrobial activity, determined by the minimum inhibition concentration (MIC), also decreases with increasing x, but the MICs are significantly smaller than the CACs, suggesting effective bacterial membrane-disrupting power. Unlike conventional antibiotics, both C8G2 and C12G2 can kill Staphylococcus aureus and Escherichia coli after only minutes of exposure under the concentrations studied. C12G2 nanofibers have considerably faster killing dynamics and lower cytotoxicity than their nonaggregated monomers. Antimicrobial activity of peptide aggregates has, to date, been underexploited, and it is found to be a very promising mechanism for peptide design. Detailed evidence for the molecular mechanisms involved is provided, based on superresolution fluorescence microscopy, solid-state nuclear magnetic resonance, atomic force microscopy, neutron scattering/reflectivity, circular dichroism, and Brewster angle microscopy.

A novel matrix derivatized from hydrophilic gigaporous polystyrene-based microspheres for high-speed immobilized-metal affinity chromatography.

Agarose coated gigaporous polystyrene microspheres were evaluated as a novel matrix for immobilized-metal affinity chromatography (IMAC). With four steps, nickel ions were successfully immobilized on the microspheres. The gigaporous structure and chromatographic properties of IMAC medium were characterized. A column packed with the matrix showed low column backpressure and high column efficiency at high flow velocity. Furthermore, this matrix was used for purifying superoxide dismutase (SOD), which was expressed in Escherichia coli (E. coli) in submerged fermentation, on an Äkta purifier 100 system under different flow velocities. The purity of the SOD from this one-step purification was 79% and the recovery yield was about 89.6% under the superficial flow velocity of 3251 cm/h. In conclusion, all the results suggested that the gigaporous matrix has considerable advantages for high-speed immobilized-metal affinity chromatography.