Progress in the catalytic glycolysis of polyethylene terephthalate.

This paper briefly reviews the development history of polyethylene terephthalate (PET) and the recycling of PET. As one of the most promising way to degrade PET into oligomers and monomers that can be used for the production of high-quality PET, catalytic glycolysis is highlighted in this review. The developments on metal salt, metal oxide and ionic solvent catalysts for glycolysis of PET are systematically summarized, besides, the proposed catalytic mechanisms of ionic liquids (ILs) and deep eutectic solvents (DESs) are presented. The metallic catalysts show high catalytic performance but causing serious environmental pollution and high waste treatment costs, thereby it is proposed that metal-free catalysts, especially ILs and DESs can be the "greener" alternatives to address the PET waste problem. Additionally, the studies related to the glycolysis kinetics are discussed in this review, showing the results that PET glycolysis process consists of heterogeneous and homogeneous depolymerization, and different models should be used to investigate different depolymerization stages in order to obtain a more realistic picture.

The molecular mechanism study of insulin in promoting wound healing under high-glucose conditions.

BACKGROUND: Wound healing is a complex process in bone development. The aim of this study was to explore the molecular mechanism study of insulin in promoting wound healing. METHODS: Firstly, the acute human monocyte leukemia cell lines were induced to differentiate into macrophages. Secondly, the porphyromonas gingivalis was applied to mix with the differentiated macrophages. Thirdly, the effect of different concentrations of insulin (0 ng/mL, 5 ng/mL, 50 ng/mL, 100 ng/mL, 200 ng/mL, 500 ng/mL, and 1,000 ng/mL) on the phagocytosis of macrophages and production of reactive oxygen species was investigated. Depending on these experiments, the optimal insulin concentration was used to treat the macrophages at different time points (0 hours and 0.5 hours) to identify the differentially expressed mRNAs. Finally, functional analysis including gene ontology (GO) and the Kyoto Encyclopedia of Genes and Genomes (KEGG) and protein-protein interaction (PPI) analysis was carried out to explore the biological function of these differentially expressed mRNAs. RESULTS: The test of phagocytosis function and production of reactive oxygen species showed that 200 ng/mL insulin treatment had a significant influence on antibacterial and production of reactive oxygen species. In RNA sequencing, a total of 415 (245 upregulated and 170 downregulated) differentially expressed mRNAs were identified between different time points. Two important signaling pathways including endocytosis and systemic lupus erythematosus were found in the KEGG enrichment analysis. In the PPI network, several hub proteins encoded by differentially expressed mRNA including ALB, HIP1R, RAB5A, HIST1H2BJ, HIST1H3G, and HIST1H2BO were identified. CONCLUSION: Our work demonstrated that several differentially expressed mRNAs, such as EGR1, RAB34, ALB, HIP1R, RAB5A, HIST1H2BJ, HIST1H3G, and HIST1H2BO and two important signaling pathways including endocytosis and systemic lupus erythematosus may play important roles in the bone wound healing.

Dissolving process of a cellulose bunch in ionic liquids: a molecular dynamics study.

In recent years, a variety of ionic liquids (ILs) were found to be capable of dissolving cellulose and mechanistic studies were also reported. However, there is still a lack of detailed information at the molecular level. Here, long time molecular dynamics simulations of cellulose bunch in 1-ethyl-3-methylimidazolium acetate (EmimAc), 1-ethyl-3-methylimidazolium chloride (EmimCl), 1-butyl-3-methylimidazolium chloride (BmimCl) and water were performed to analyze the inherent interaction and dissolving mechanism. Complete dissolution of the cellulose bunch was observed in EmimAc, while little change took place in EmimCl and BmimCl, and nothing significant happened in water. The deconstruction of the hydrogen bond (H-bond) network in cellulose was found and analyzed quantitatively. The synergistic effect of cations and anions was revealed by analyzing the whole dissolving process. Initially, cations bind to the side face of the cellulose bunch and anions insert into the cellulose strands to form H-bonds with hydroxyl groups. Then cations start to intercalate into cellulose chains due to their strong electrostatic interaction with the entered anions. The H-bonds formed by Cl(-) cannot effectively separate the cellulose chain and that is the reason why EmimCl and BmimCl dissolve cellulose more slowly. These findings deepen people's understanding on how ILs dissolve cellulose and would be helpful for designing new efficient ILs to dissolve cellulose.

The ionic liquids upon perchlorate to promote the C-C/C-O bonds cleavage in alkali lignin under photothermal synergism.

Transforming lignin into aromatic monomers is critically attractive to develop green and sustainable energy supplies. However, the usage of the additional catalysts like metal or base/acid is commonly limited by the caused repolymerized and environmental issues. The key step is to mediate electron transfer in lignin to trigger lignin C-C/C-O bonds cleavage without the catalysts mentioned above. Here, we report that the ionic liquids [BMim][ClO4] was found to trigger lignin electron transfer to cleave the C-C/C-O bonds for aromatic monomers without any additional catalyst. The proton transfer from [BMim]+ to [ClO4]- could polarize the anion and decrease its structure stability, upon which the active hydroxyl radical generated and induced lignin C-C/C-O bonds fragmentation via free radical-mediated routes with the assistance of photothermal synergism. About 4.4 wt% yields of aromatic monomers, mainly composed of vanillin and acetosyringone, are afforded in [BMim][ClO4] under UV-light irradiation in the air at 80 °C. This work opens the way to produce value-added aromatic monomers from lignin using an eco-friendly, energy-efficient, and simple route that may contribute to the sustainable utilization of renewable natural resources.

Coagulation of chitin and cellulose from 1-ethyl-3-methylimidazolium acetate ionic-liquid solutions using carbon dioxide.

Chemisorption of carbon dioxide by 1-ethyl-3-methylimidazolium acetate ([C2 mim][OAc]) provides a route to coagulate chitin and cellulose from [C2 mim][OAc] solutions without the use of high-boiling antisolvents (e.g., water or ethanol). The use of CO2 chemisorption as an alternative coagulating process has the potential to provide an economical and energy-efficient method for recycling the ionic liquid.

Surfactants facilitated glycerol organosolv pretreatment of lignocellulosic biomass by structural modification for co-production of fermentable sugars and highly reactive lignin.

This study reported that surfactants could facilitate the organosolv pretreatment of lignocellulosic biomass (LCB) to produce fermentable sugars and highly active lignin. Under the optimized conditions, the surfactant-assisted glycerol organosolv (saGO) pretreatment achieved 80.7% delignification with a retention of 93.4% cellulose and 83.0% hemicellulose. The saGO pretreated substrate exhibited an excellent enzymatic hydrolyzability, achieving 93% of glucose yield from the enzymatic hydrolysis at 48 h. Structural analysis showed that the saGO lignin contained rich ß-O-4 bondings with less repolymerization and lower phenolic hydroxyl groups, thus forming highly reactive lignin fragments. The analysis evidenced that the surfactant graft the lignin by structural modification, which was responsible for the excellent substrate hydrolyzability. The co-production of fermentable sugars and organosolv lignin almost recovered a gross energy (87.2%) from LCB. Overall, the saGO pretreatment holds a lot of promise for launching a novel pathway towards lignocellulosic fractionation and lignin valorization.

Wearable lignin-based hydrogel electronics: A mini-review.

In recent years, various biomacromolecule-based hydrogels have been extensively and deeply studied in the field of wearable electronics. However, the application of lignin-based hydrogels in flexible devices is still in its infancy. This is mainly due to the significant differences in physical and chemical properties of industrially extracted lignin. In order to seek the universal applicability of diversified lignin in the preparation of hydrogel electronics, we mainly paid attention to the natural physical and chemical properties of lignin to discuss feasible solutions for functional gel design. These properties include chemical reactivity, UV shielding, antibacterial, bio-degradability, anti-oxidation, etc. Finally, in view of lignin's unique properties and the demand for high-quality flexible electronics, some insights are proposed regarding the future research and development directions of lignin-based hydrogel electronics.