Amphiphilic Block Copolymers Containing Benzenesulfonyl Azide Groups as Visible Light-Responsive Drug Carriers for Image-Guided Delivery.

Nanoparticles (NPs) containing light-responsive polymers and imaging agents show great promise for controlled drug delivery. However, most light-responsive NPs rely on short-wavelength excitation, resulting in poor tissue penetration and potential cytotoxicity. Moreover, excessively sensitive NPs may prematurely release drugs during storage and circulation, diminishing their efficacy and causing off-target toxicity. Herein, we report visible-light-responsive NPs composed of an amphiphilic block copolymer containing responsive 4-acrylamide benzenesulfonyl azide (ABSA) and hydrophilic N,N'-dimethylacrylamide (DMA) units. The polymer pDMA-ABSA was loaded with the chemotherapy drug dasatinib and zinc tetraphenylporphyrin (ZnTPP). ZnTPP acted as an imaging reagent and a photosensitizer to reduce ABSA upon visible light irradiation, converting hydrophobic units to hydrophilic units and disrupting NPs to trigger drug release. These NPs enabled real-time fluorescence imaging in cells and exhibited synergistic chemophotodynamic therapy against multiple cancer cell lines. Our light-responsive NP platform holds great promise for controlled drug delivery and cancer theranostics, circumventing the limitations of traditional photosensitive nanosystems.

A Versatile Integrated Microfluidic Chip Based on Sonic Toothbrush-Assisted Mixing for Analyses of Diverse Biomolecules.

Usually, different assays and instrumentation are required for different types of targets, e.g., nucleic acids, proteins, small molecules, etc., because of significant differences in their structures and sizes. To increase efficiency and reduce costs, a desirable solution is to develop a versatile platform suitable for diverse objectives. Here, we established a versatile detection technique: first, target separation and enrichment were carried out using magnetic beads (MBs); then, different targets were converted to same barcoded DNA strands (BDs) released from gold nanoparticles; finally, sensitive detection of three different targets (miRNA-21, digoxigenin antibody, and aflatoxin B1) was achieved through exonuclease III (Exo III) cyclic cleavage-assisted signal amplification. To simplify the operation, we integrated this technique into a microfluidic chip with multiple chambers in which the requisite reagents were prestored. Just by moving the MBs through different chambers with a magnet, multiple steps can be completed. Due to the limited space in microfluidic chips, the full mixing of MBs and solution is a key point to improve reaction efficiency. The mixing can be achieved by acoustic vibration generated by a small, portable sonic toothbrush. Based on the microfluidic chip, the detection limits of the above three targets were 0.76 pM, 0.16 ng/mL, and 0.56 nM, respectively. Furthermore, miRNA-21 and Digoxigenin antibody (Dig-Ab) in serum and AFB1 in corn powder were also used to demonstrate the performance of this chip. Our versatile platform is easy to operate and is expected to develop into an automatic "sample-to-answer" device.

Gut microbiota combined with metabolome dissects long-term nanoplastics exposure-induced disturbed spermatogenesis.

As the concerned emerging pollutants, several lines of evidence have indicated that nanoplastics (NPs) lead to reproductive toxicity. However, the biological mechanism underlying NPs disturbed spermatogenesis remains largely unknown. Therefore, we aimed to reveal the potential mechanism of impaired spermatogenesis caused by long-term NPs exposure from the perspective of integrated metabolome and microbiome analysis. After 12 weeks of gavage of polystyrene nanoplastics (PS-NPs) and animo-modified polystyrene nanoplastics (Amino-NPs), a well-designed two-exposure stages experimental condition. We found that NPs exposure induced apparent abnormal spermatogenesis, which appeared more severe in the Amino-NPs group. Mechanistically, 14 floras associated with glucose and lipid metabolism were significantly altered, as evidenced by 16 S rRNA sequencing. Testicular metabolome revealed that the Top 50 changed metabolites were also enriched in lipid metabolism. Subsequently, the combined gut microbiome and metabolome analysis uncovered the strong correlations between Klebsiella, Blautia, Parabacteroides, and lipid metabolites (e.g., PC, LysoPC and GPCho). We speculate that the dysbiosis of gut microbiota-related disturbed lipid metabolism may be responsible for long-term NPs-induced damaged spermatogenesis, which provides new insights into NPs-induced dysregulated spermatogenesis.

[Efficacy and tolerability of dapoxetine in the treatment of premature ejaculation].

OBJECTIVE: To investigate the efficacy and adverse effects of dapoxetine in the treatment of premature ejaculation. METHODS: We randomly assigned outpatients with premature ejaculation in the proportion of 2:1 to receive 30 mg dapoxetine on demand (n =78) or 50 mg sertraline qd for one month (n = 39). Follow-up was accomplished in 95 cases, 63 in the dapoxetine group and 32 in the sertraline group. We recorded the intravaginal ejaculatory latency time (IELT), clinical global impression of change (CGIC) score, and adverse reactions of the patients and compared them between the two groups. RESULTS: IELT was significantly increased in both the dapoxetine (from [0.87 ± 0.31] to [2.84 ± 0.68] min, P < 0.05) and the sertraline group (from [0.84 ± 0.28] to [2.71 ± 0.92] min, P < 0.05) after medication. Based on the CGIC scores in premature ejaculation, the rate of excellence or effectiveness was 36.5% in the dapoxetine and 37. 5% in the sertraline group, and the rate of improvement was 63.5% in the former and 71.9% in the latter. The incidence rates of dizziness, nausea, headache, and diarrhea were slightly higher (P > 0.05) while those of fatigue, somnolence, and dry mouth significantly higher (P < 0.05) in the sertraline than in the dapoxetine group. CONCLUSION: On-demand oral medication of dapoxetine is effective and well-tolerated for the treatment of premature ejaculation.

Circulation of Coxsackievirus A6 in hand-foot-mouth disease in Guangzhou, 2010-2012.

BACKGROUND: Hand, foot and mouth disease (HFMD) is usually caused by Enterovirus 71(EV71), and Coxsackievirus A16 (CV-A16) in Guangzhou, the biggest city of South China. However, Coxsackievirus A6 (CV-A6) were observed increased dramatically from 2010-2012. METHODS: In order to understand and to describe the epidemiologic and genetic characteristics of CV-A6, specimens of 5482 suspected HFMD cases were collected and examined by real-time fluorescence PCR. All samples positive for enteroviruses were analyzed by descriptive statistics. Phylogenetic analysis of CV-A6 based on the VP1 sequences was performed to investigate molecular and evolutionary characteristics. RESULTS: Coxsackievirus A6 increased dramatically from 9.04% in 2010 to 23.21% in 2012 and became one of the main causative agents of HFMD in Guangzhou. CV-A6 attack rates were highest in one to two year olds (33.14%). Typical clinic symptoms of CV-A6 HFMD include fever (589/720, 81.81%), maculopopular rash and vesicular exanthema around the perioral area (408/720, 56.66%), intraoral (545/720, 75.69%), the buttock (395/720, 54.86%), the trunk (244/720, 33.89%), the knee (188/720, 26.11%), and the dorsal aspects of hands (437/720, 60.69%). Phylogenetic analysis showed the CV-A6 isolates in this study belonged to Cluster A1 and were similar to those found in Shanghai in 2011 and 2012 (JX495148, KC414735), Shenzhen in 2011 (JX473394), Japan in 2011 (AB649243, AB649246), France in 2010(HE572928), Thailand in 2012(JX556564) and Israel in 2012 and 2013(.KF991010, KF991012).

Spatiotemporal Changes and Influencing Factors of Hand, Foot, and Mouth Disease in Guangzhou, China, From 2013 to 2022: Retrospective Analysis.

Background: In the past 10 years, the number of hand, foot, and mouth disease (HFMD) cases reported in Guangzhou, China, has averaged about 60,000 per year. It is necessary to conduct an in-depth analysis to understand the epidemiological pattern and related influencing factors of HFMD in this region. Objective: This study aims to describe the epidemiological characteristics and spatiotemporal distribution of HFMD cases in Guangzhou from 2013 to 2022 and explore the relationship between sociodemographic factors and HFMD incidence. Methods: The data of HFMD cases in Guangzhou come from the Infectious Disease Information Management System of the Guangzhou Center for Disease Control and Prevention. Spatial analysis and space-time scan statistics were used to visualize the spatiotemporal distribution of HFMD cases. Multifactor ordinary minimum regression model, geographically weighted regression, and geographically and temporally weighted regression were used to analyze the influencing factors, including population, economy, education, and medical care. Results: From 2013 to 2022, a total of 599,353 HFMD cases were reported in Guangzhou, with an average annual incidence rate of 403.62/100,000. Children aged 5 years and younger accounted for 93.64% (561,218/599,353) of all cases. HFMD cases showed obvious bimodal distribution characteristics, with the peak period from May to July and the secondary peak period from August to October. HFMDs in Guangzhou exhibited a spatial aggregation trend, with the central urban area showing a pattern of low-low aggregation and the peripheral urban area demonstrating high-high aggregation. High-risk areas showed a dynamic trend of shifting from the west to the east of peripheral urban areas, with coverage first increasing and then decreasing. The geographically and temporally weighted regression model results indicated that population density (ß=-0.016) and average annual income of employees (ß=-0.007) were protective factors for HFMD incidence, while the average number of students in each primary school (ß=1.416) and kindergarten (ß=0.412) was a risk factor. Conclusions: HFMD cases in Guangzhou were mainly infants and young children, and there were obvious differences in time and space. HFMD is highly prevalent in summer and autumn, and peripheral urban areas were identified as high-risk areas. Improving the economic level of peripheral urban areas and reducing the number of students in preschool education institutions are key strategies to controlling HFMD.

Organism-Inspired Antioxidant Bioadhesive with Strong Sealing Ability to Prevent Epidural Adhesion.

Epidural adhesion or epidural fibrosis is the major reason for postoperative pain, which remains a clinically challenging problem. Current physical barriers fail to provide a satisfactory therapeutic outcome mainly due to their lack of adhesion, inability to prevent fluid leakage, and exhibiting limited antioxidant properties. Herein, we fabricated a cysteine-modified bioadhesive (SECAgel) with improved sealing and antioxidant properties for epidural adhesion prevention, inspired by the organism's antioxidant systems. The resulting SECAgel showed good injectability and in situ adhesion ability, effectively covering every corner of the irregular wound. Besides, it possessed efficient sealing properties (395.2 mmHg), effectively stopping blood leakage in the rabbit carotid artery transection model. The antioxidant experiments demonstrated that the SECAgel effectively scavenged various radicals and saved the cells from oxidative stress. Two animal models were used to show that the SECAgel effectively inhibited adhesion in both situations with and without cerebrospinal fluid leakage. The RNA sequencing analysis showed that SECAgel treatment effectively inhibited the expression of key genes related to adhesion development, inflammatory response, and oxidative stress. The SECAgel, together with good biocompatibility, can be a good candidate for preventing epidural adhesion in the clinic.

A PEG-CMC-THB-PRTM hydrogel with antibacterial and hemostatic properties for promoting wound healing.

The introduction of antibacterial and hemostatic hydrogels with good mechanical properties that display desirable impacts on wound healing process is still an unmet essential for clinical wound dressings. Herein, a multifunctional hydrogel PEG-CMC-THB-PRTM was fabricated via a one-pot method combining carboxymethyl chitosan (CMC), 2,3,4-trihydroxybenzaldehyde (THB), protamine (PRTM) and 4-arm polyethylene glycol aldehyde (PEG). The hydrogel was formed by the dynamic Schiff base reaction between amino groups of carboxymethyl chitosan and aldehyde groups of 4-arm polyethylene glycol aldehyde and exhibited excellent mechanical properties. The developed hydrogel also showed outstanding effects on anti-bacteria and hemostasis through the release of PRTM. Moreover, the hydrogel could promote extracellular matrix formation and wound closure in vivo, thereby accelerating the healing of skin wound. These results suggested that the multifunctional PEG-CMC-THB-PRTM hydrogel is a promising candidate for the clinical treatment of full-thickness wounds.

Long-term release kinetic characteristics of microplastic from commonly used masks into water under simulated natural environments.

Masks-related microplastic pollution poses a new threat to the environment and human health that has gained increasing concern. However, the long-term release kinetics of microplastic from masks in aquatic environments have yet to studied, which hampers its risk assessment. Four types of masks, namely cotton mask, fashion mask, N95 mask, and disposable surgical mask were exposed to systematically simulated natural water environments to determine the time-dependent microplastic release characteristics at 3, 6, 9, and 12 months, respectively. In addition, the structure changes of employed masks were examined by scanning electron microscopy. Moreover, Fourier transform infrared spectroscopy was applied to analyze the chemical composition and groups of released microplastic fibers. Our results showed that the simulated natural water environment could degrade four types of masks and continuously produce microplastic fibers/fragments in a time-dependent manner. The dominant size of released particles/fibers was below 20 µm across four types of face masks. The physical structure of all four masks was damaged to varying degrees concomitant with photo-oxidation reaction. Collectively, we characterized the long-term release kinetics of microplastic from four types of commonly used masks under a well-mimic real word water environment. Our findings suggest that urgent action must be taken to properly manage disposable masks and ultimately limit the health threats associated with discarded masks.

Portable detection of multiple mycotoxins based on a sonic toothbrush, microfluidic chip and smartphone.

A portable method for on-site detection of three mycotoxins was developed based on a sonic toothbrush, microfluidic chip and smartphone. Our method could complete all procedures, including sample pretreatment, signal conversion and processing, without any sophisticated instruments. The limits of detection for these mycotoxins were lower than the limit values in cereals in the standards of China and the European Union.

Synthesis, characterization and absorption evaluation of bifunctional monomer magnetic molecularly imprinted polymers nanoparticles for the extraction of 6-benzylaminopurine from vegetables.

An adsorbent-magnetic molecularly imprinted polymers nanoparticles (MMIPs NPs) were synthesized for the extraction of 6-benzylaminopurine (6-BA) using Fe3O4 as magnetic core. The MIPs were prepared with methacrylic acid and sodium p-styrene sulfonate as bifunctional monomers. The adsorbents were characterized by transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffractometer, thermogravimetric analysis and vibrating sample magnetometer. The adsorption properties were evaluated by static, kinetic and selective adsorption experiments. The MMIPs NPs exhibit a high adsorption capacity (37.63 mg g-1) and favorable imprinting factor (2.88) toward 6-BA. The chromatogram of 6-BA extraction using the MMIPs NPs as the adsorbent demonstrates that the matrix interference has been minimized. More importantly, MMIPs NPs can be applied to extracting 6-BA from mung bean sprout and cucumber with satisfactory recoveries (91.14-104.52%), and can be reused for at least five times. This work provides a new strategy to efficiently extract 6-BA from vegetables.

Recent progress in regenerated cellulose-based fibers from alkali/urea system via spinning process.

Cellulose as the most abundant renewable polymer displays great potential to substitute the petroleum-derived synthetic polymers. However, cellulose is difficult to be melted or dissolved, which greatly restricts its development and utilization. Herein, the "green" alkali/urea aqueous system for cellulose dissolution is briefly summarized by illustrating the dissolving mechanism. The comparison of cellulose fibers from different solvent is presented. In addition, the recent achievements for the efficient and "green" preparation of regenerated cellulose fibers from alkali/urea system are also summarized. By investigating the effects of experimental conditions and technical parameters on the structure and performance of regenerated cellulose fibers, the improved fiber mechanical properties and the decreased production costs are achieved. Moreover, the preparation and application of cellulose-based functional fibers from alkali/urea system are also reviewed, together with the urgent challenges and future development perspectives, which provide the novel approach for the high value-added development and utilization of cellulose fibers.

Prompting immunostimulatory activity of curdlan with grafting methoxypolyethylene glycol.

The immunostimulatory activity of polysaccharides can improve human immunity, but their activity is low and prompting the activity is a great challenge. Curdlan, is a linear beta-1,3-glucan and has the potential to induce immune responses. However, owing to its tight triple helix structure and insolubility in water, its immunostimulatory activity is weakened. The keyway to promote its immunostimulatory activity is to relax its tight triple helix structure. In this work, methoxypolyethylene glycol (mPEG) was grafted onto curdlan (curdlan-g-mPEG) to unwind its triple helix structure. With its grafting mPEG, the water solubility of curdlan was enhanced. Moreover, with curdlan-g-mPEG treatment, macrophages secreted more tumor necrosis factor (TNF)-alpha and interleukin (IL)-6 and exhibited favorable phagocytosis of bacteria (Staphylococcus aureus and Pseudomonas aeruginosa). These results reveal that curdlan-g-mPEG as an immunostimulant has potential applications in immunology and antibiotics.

Time Rules the Efficacy of Immune Checkpoint Inhibitors in Photodynamic Therapy.

Lack of adequate effector T cells infiltrated in tumor is one of the main problems in the failure of immune checkpoint blockade therapy (ICBT). Photodynamic therapy (PDT) induced acute inflammation can sensitize tumors and activate T cells, thus assisting immune checkpoint inhibitors (ICI) against tumor growth and metastasis. T cells maturation and activation lag 3 to 7 days behind PDT. However, such timing in the combination therapy of ICI and PDT is commonly ignored in designing numerous multi-functional integrated nanomedicines. Herein, the authors illustrate that intervention timing of ICI after PDT affects the anti-tumor efficacy. A tumor-targeting nanomedicine is prepared by encapsulating indocyanine green into CD44 specifically binding material, a hyaluronic acid conjugated lipid poly(ethylene glycol). The PDT nanomedicine is designed to induce a robust immune response in tumor. The optimal group (Combo-STAR), ICI gave 5 days after PDT, significantly suppresses local tumor growth and eliminates metastasis. What should be highlighted is the time point of administration because if ICI is given too early, T cells are immature, otherwise, T cells are exhausted if ICI is given too late. This work presents theoretical guidance for raising awareness of intervention timing when augmenting ICBT with immune response inducers in clinic.

Cellulose membrane modified with LED209 as an antibacterial and anti-adhesion material.

Bacterial adhesion infection caused by medical materials in clinical application has become a serious threat, and it urgently needs new strategies to deal with these clinical challenges. In this work, LED209, a highly selective histidine sensor kinase inhibitor of Gram-negative bacteria, was covalently attached on cellulose membrane (CM) via click reaction. The data of contact angle measurements, ATR-FTIR and X-ray photoelectron spectroscopy confirmed the successful synthesis of LED-CM. In addition, the results of antibacterial activity of the membranes shown that LED-CM exhibited excellent anti-adhesion ability to Enterohemorrhagic Escherichia coli (EHEC), and significantly reduced the formation of bacterial biofilm. Importantly, LED-CM was able to repress the expression of virulence genes in EHEC. Furthermore, LED209-functionalized cellulose membrane indicated no cytotoxicity to mammalian cells. Hence, our present work demonstrated that CM modified with LED209 possessed markedly anti-adhesion activity against EHEC, which offered a potent antimicrobial material for combating bacterial infections.

Not all bad: Drug-induced interstitial pneumonia in DLBCL patients is potentially fatal but could be linked to better survival.

BACKGROUND: Interstitial pneumonitis (IP), a fatal complication of DLBCL treatment, can bring great challenges to clinicians. We retrospectively investigated clinical characteristics and risk factors of previous IP patients, and analyzed their survival data. METHODS: 556 DLBCL patients receiving CHOP-like regimens were enrolled between 2013 and 2018 in Sichuan Cancer Hospital. FINDINGS: The IP incidences were 4.9 % (27/556), 1.1 % (2/186), 5.2 % (10/191) and 8.4 % (15/179) in CHOP, R-CHOP and R-CDOP groups respectively (P = 0.005). When IP was diagnosed, monocyte and IL-6 were significantly higher while CD4 and CD4/CD8 significantly lower compared to baseline. 81.5 % (22/27) of IP patients were pathogen-negative with good response to glucocorticoid monotherapy. Only one patient died while the others recovered from IP and subsequently underwent previous chemotherapy. 19.2 % (5/26) of IP patients experienced IP recurrence, likely due to the reason of lower initial dose or faster withdrawal speed of glucocorticoid. Multivariate analysis identified male, in addition to G-CSF, rituximab and pegylated liposomal doxorubicin as risk factors. The 3-year PFS and OS were 74.1 % and 46.9 % respectively for patients with IP. INTERPRETATION: We suggest that IL-6, monocyte and CD4 should be monitored closely, especially in R-CHOP/R-CDOP group. Sufficient initial dose and slow decrease of glucocorticoid based on radiographic remissions were critical strategies to reduce IP recurrence. We speculate that drug-induced immune imbalance could be trigger of developing IP, causing a lower intensity cytokine storm, resulting in a potential immunotherapy. This complication might bring benefit in patients' survival through a mechanism similar to PD-1.

Influence of pollutants' control facilities on PM2.5 profiles emitted from an iron and steel plant.

A typical long process in an iron and steel plant has been investigated with four main manufacturing processes, and nine sample sites were selected, in order to provide a comprehensive understanding of the PM2.5 profile changes caused by the pollutants' control facilities. The result shows pollutants' control facilities have not only affected PM2.5 concentrations, but also the PM2.5 profiles. PM2.5 concentration was increased 1.89 times after Flue gas desulfurization (FGD) in the sintering process, the Ca content in PM2.5 increased to 21.1% caused by the desulfurizing agent; compared with electrostatic precipitator (ESP), bag filter (BF) is more effective for removal of fine particles, especially the condensable particles. The chemical compositions of Cl, K, Pb and Sb decreased after ESP in the sintering process, Fe decreased to 38.0% after ESP in the pelletizing process, and [Formula: see text] and Organic carbon (OC) increased in both processes. Different from ESP, Fe content increased obviously after BF in both blast furnace and converter processes, while S, K, [Formula: see text], and OC are all decreased after BF. The coefficient of divergence (CD) values has been calculated at 0.42∼0.60, showing giant influences of pollutants' control facilities on PM2.5 chemical profiles. Sixteen Polycyclic aromatic hydrocarbons (PAHs) in PM2.5 have been analysed, the result shows that de-dusting facilities (ESP and BF) are quite effective for PAHs removal, and the PAHs' concentration significantly increased after FGD. More efforts are still needed to complete the accurate profile data with the rapid development of pollutants' control technologies.

Comparative analysis of connective tissue disease-associated interstitial lung disease and interstitial pneumonia with autoimmune features.

OBJECTIVE: This retrospective clinical study aimed to examine the similarities and differences between connective tissue disease-associated interstitial lung disease (CTD-ILD) and interstitial pneumonia with autoimmune features (IPAF) and to identify the influencing factors of CTD-ILD, with a goal of early detection and active treatment of the disease. METHODS: We conducted a retrospective study of 480 patients: 412 with CTD-ILD and 68 with IPAF. Demographic features, clinical characteristics, laboratory indicators, and chest high-resolution computed tomography (HRCT) imaging data were analyzed. RESULTS: Compared with the IPAF group, the CTD-ILD group contained more women, and the incidences of joint pain, dry mouth/dry eyes, and Raynaud's phenomenon were higher; erythrocyte sedimentation rate (ESR) and D-dimer levels were higher; red blood cell (RBC) and hemoglobin (Hb) levels were lower; a high rheumatoid factor (RF) titer (> 2 times the normal upper limit) was observed, and anti-cyclic citrullinated peptide antibody (anti-CCP), anti-keratin antibody (AKA), antinuclear antibody (ANA), and anti-melanoma differentiation-associated gene 5 antibody (anti-MDA5) levels were higher. Compared with CTD-ILD patients, IPAF patients were more likely to present initially with respiratory symptoms, with higher rates of fever, cough and expectoration, dyspnea, and Velcro crackles; anti-Ro52 titers were higher; incidences of honeycombing opacity, reticulate opacity, patchy opacity, and pleural thickening were greater. Female sex, a high RF titer (> 2 times the normal upper limit), anti-CCP positivity, ANA positivity, and anti-MDA5 positivity were risk factors for CTD-ILD when the odds ratios were adjusted. CONCLUSION: CTD-ILD and IPAF patients differed in demographic features, clinical characteristics, laboratory indicators, and chest HRCT imaging data. Female sex, a high RF titer (> 2 times the normal upper limit), anti-CCP positivity, ANA positivity, and anti-MDA5 positivity were risk factors for CTD-ILD.Key Points• This retrospective clinical study comprehensively compared the demographic features, clinical characteristics, laboratory indicators, and chest HRCT imaging data of CTD-ILD and IPAF patients.• The evidence suggested that female sex, a high RF titer, anti-CCP positivity, ANA positivity, and anti-MDA5 positivity were risk factors for CTD-ILD.

Aramid nanofiber/bacterial cellulose composite separators for lithium-ion batteries.

Aramid nanofibers (ANFs) are expected to serve as new nanoscale building blocks which could improve both the mechanical performance and ionic conductivity of bacterial cellulose (BC) membranes due to their high interfacial bonding, matching of fiber size and the polar aramid groups in ANFs. Herein, composite membranes of BC and ANFs with different ANFs loadings of 2%, 4%, 6% and 8% were prepared by a traditional paper-making method after homogeneous mixing. The achieved membranes with relatively low ANFs loadings exhibited the increased tensile strength and ionic conductivity. The Li/LiFePO4 half-cells based on the 2%ANFs/BC separator demonstrated the best electrochemical performance (including discharge capacity, C-rate capability and cycling stability). Thus, the proposed ANFs/BC separators are a promising candidate for high-performance Li-ion batteries.

Selection of Affinity Reagents to Neutralize the Hemolytic Toxicity of Melittin Based on a Self-Assembled Nanoparticle Library.

Antibodies are the most common affinity reagents for specific target recognition. However, their applications are limited by high cost and low stability. Thus, seeking substitutes for antibodies is of great significance. In this work, we designed a library containing 82 self-assembled nanoparticles (SNPs) based on the self-assembly of ß-cyclodextrin polymers and adamantane derivatives, and then screened out eight types of SNPs capable of suppressing the toxicity of melittin using a hemolytic activity neutralization assay. The affinities of the SNPs to melittin were demonstrated using surface plasmon resonance (SPR). As evidenced by cytotoxicity experiments, SNPs could also suppress the toxicity of melittin to other cells. In addition, to verify the universality of our method, 11 types of SNPs capable of neutralizing another toxic peptide, phenolic soluble polypeptide (PSMα3) secreted by Staphylococcus aureus, were selected from the same SNP library. Our self-assembly-based method for the library preparation has the advantages of flexible design, mild experimental condition, and simple operation, which is expected to seek artificial affinity reagents for more species.