Ectopic and transient expression of VvDIR4 gene in Arabidopsis and grapes enhances resistance to anthracnose via affecting hormone signaling pathways and lignin production.

BACKGROUND: DIR (Dirigent) proteins play important roles in the biosynthesis of lignin and lignans and are involved in various processes such as plant growth, development, and stress responses. However, there is less information about VvDIR proteins in grapevine (Vitis vinifera L). RESULTS: In this study, we used bioinformatics methods to identify members of the DIR gene family in grapevine and identified 18 VvDIR genes in grapevine. These genes were classified into 5 subfamilies based on phylogenetic analysis. In promoter analysis, various plant hormones, stress, and light-responsive cis-elements were detected. Expression profiling of all genes following Colletotrichum gloeosporioides infection and phytohormones (salicylic acid (SA) and jasmonic acid (JA)) application suggested significant upregulation of 17 and 6 VvDIR genes, respectively. Further, we overexpressed the VvDIR4 gene in Arabidopsis thaliana and grapes for functional analysis. Ectopic expression of VvDIR4 in A. thaliana and transient expression in grapes increased resistance against C. gloeosporioides and C. higginsianum, respectively. Phenotypic observations showed small disease lesions in transgenic plants. Further, the expression patterns of genes having presumed roles in SA and JA signaling pathways were also influenced. Lignin contents were measured before and after C. higginsianum infection; the transgenic A. thaliana lines showed higher lignin content than wild-type, and a significant increase was observed after C. higginsianum infection. CONCLUSIONS: Based on the findings, we surmise that VvDIR4 is involved in hormonal and lignin synthesis pathways which regulate resistance against anthracnose. Our study provides novel insights into the function of VvDIR genes and new candidate genes for grapevine disease resistance breeding programs.

A New Reversible Thermosensitive Liquid-Solid TENG Based on a P(NIPAM-MMA) Copolymer for Triboelectricity Regulation and Temperature Monitoring.

Intelligent and highly precise control of liquid-solid triboelectricity is of great significance for energy collection and electrostatic prevention. However, most of the traditional methods are irreversible and complex, greatly limiting their applicability. Here, a reversible thermosensitive liquid-solid triboelectric nanogenerator (L-S TENG) is assembled based on P(NIPAM-MMA) (PNM) copolymer for tunable triboelectrification. Through temperature regulation, the conformation between acylamino and isopropyl groups changes with the interfacial wettability and triboelectricity of PNM. When the temperature rises from 20 to 60 °C, the contact angle of PNM rises from 22.49° to 82.08°, and the output of the PNM-based L-S TENG shows a 27-fold increase. In addition, this transformation is reversible and repeatable with excellent durability for up to 60 days. Other organic liquids, such as glycol, exhibit positive response to temperature for this PNM-based L-S TENG. Polymers including polymethylmethacrylic, polytetrafluoroethylene, and polyimide are verified to not have such thermo-sensitivity properties. In addition, a droplet-based wireless warning system based on PNM is designed and actuated for monitoring specific temperature. The introduction of thermal PNM not only provides new material for reversible manipulation of L-S TENG, but also provides a new method for designing highly sensitive temperature warning sensors.

Intentional replantation of periodontally involved hopeless teeth: a case series study.

OBJECTIVES: To explore the clinical effect, the healing modes, and the potential influence factors of intentional replantation for periodontally hopeless teeth in combination with regeneration techniques. MATERIALS AND METHODS: Intentional replantation was operated on forty-eight periodontally hopeless teeth from forty-eight patients. The clinical indexes and the X-ray films were recorded during the follow-up period of 18 months. The Wilcoxon signed-rank test or the paired T test was adopted to carry out the statistical analysis. RESULTS: The overall survival rate at the ninth month was 95.8% and declined to 91.7% at the eighteenth month. The improved rate of the mobility was 89.1% at the ninth month and the ankylosis percentage was 77.3% at the eighteenth month. The survival rate and mobility-improved rate of anterior teeth were both better than that of posterior teeth. Probing depth and bone loss decreased while ginginval recession increased (P < 0.05). Smoking had an adverse effect on both mobility improvement and bone gain (P < 0.05). CONCLUSIONS: Intentional replantation for periodontally hopeless teeth could achieve favorable outcomes through a reasonable healing mode of tooth ankylosis. Strict control of infection and smoking could improve the success rate of this procedure. CLINICAL RELEVANCE: To provide additional treatment for allowance of flexible options when patients and dentists are faced with periodontally hopeless teeth.

Intentional replantation for a Class 4/Stage C cemental tear: Etiology, choice and outcomes of treatment.

Cemental tears, root cracks, and associated periapical-periodontal lesions may occur simultaneously in one tooth, and can be effectively managed by intentional replantation and etiological control. A durable splint, along with occlusal and periodontal monitoring, is required as healing progresses slowly and may be insufficient.

Differential effects of clopidogrel and/or aspirin on the healing of tooth extraction wound bone tissue.

Introduction: A multitude of variables influence the healing of tooth extraction wounds, and delayed or non-healing extraction wounds might complicate later prosthodontic therapy. In this research, we analyzed the effects of systemic clopidogrel and aspirin alone or in combination on the healing of tooth extraction wounds in mice in order to provide experimental evidence for the healing of extraction wounds in patients who are clinically treated with the two medicines. Methods: 7-week-old ICR mice were randomly divided into four groups: control group (CON), clopidogrel group (CLOP), aspirin group (ASP), and clopidogrel combined with aspirin group (CLOP + ASP); left upper first molar was extracted, after which mice in 1 week of adaptive feeding, CLOP/ASP/CLOP + ASP groups were respectively administered with clopidogrel (10 mg/kg/d), aspirin (15 mg/kg/d), clopidogrel (10 mg/kg/d)+aspirin (15 mg/kg/d), and the control group was given an equal amount of 0.9% saline by gavage. Mice in each group were euthanized at 14 and 28 days postoperatively, and the maxilla was extracted. The tissues in the extraction sockets were examined using MicroCT and sectioned for HE staining, Masson staining, and TRAP staining, and immunohistochemistry staining (for TRAP, RANKL and osteoprotegerin). Results: MicroCT analysis showed that at day 14, BS/BV was significantly lower in CLOP and CLOP + ASP groups compared to control and ASP groups, while BV/TV, Tb.Th was significantly higher. At day 28, BV/TV was significantly higher in the CLOP + ASP group compared to the CLOP group, with p < 0.05 for all results. HE staining and Masson trichrome staining findings revealed that at day 28, the mesenchyme in the bone was further decreased compared to that at day 14, accompanied with tightly arranged and interconnected bone trabeculae. In the quantitative analysis of Masson, the fraction of newly formed collagen was significantly higher in the CLOP group in comparison with that in the CON group (p < 0.05). At day 14, the ASP group had substantially more TRAP-positive cells than the CLOP and CLOP + ASP groups (p < 0.05). In immunohistochemical staining, RANKL expression was found to be significantly higher in the ASP group than those in the other three groups at day 28 (p < 0.05); OPG expression was significantly higher in the CLOP group and the CLOP + ASP group compared with that at day 14, and was higher than that in the ASP group at day 14 and day 28. OPG/RANKL was significantly higher in the CLOP and the CLOP + ASP groups than in the ASP group (p < 0.05). Conclusion: Clopidogrel alone promotes osteogenesis in the extraction wound, whereas aspirin alone inhibits alveolar bone healing. When the two drugs were combined, the healing effect of the extraction wound was more similar to that of the clopidogrel alone group. These results indicated that clopidogrel could promote the healing of the tooth extraction wound, and neutralize the adverse effect of ASP on osteogenesis when the two drugs were used in combination.

A novel gene ZNF862 causes hereditary gingival fibromatosis.

Hereditary gingival fibromatosis (HGF) is the most common genetic form of gingival fibromatosis which is featured as a localized or generalized overgrowth of gingivae. Currently two genes (SOS1 and REST), as well as four loci (2p22.1, 2p23.3-p22.3, 5q13-q22, and 11p15), have been identified as associated with HGF in a dominant inheritance pattern. Here, we report 13 individuals with autosomal-dominant HGF from a four-generation Chinese family. Whole-exome sequencing followed by further genetic co-segregation analysis was performed for the family members across three generations. A novel heterozygous missense mutation (c.2812G > A) in zinc finger protein 862 gene (ZNF862) was identified, and it is absent among the population as per the Genome Aggregation Database. The functional study supports a biological role of ZNF862 for increasing the profibrotic factors particularly COL1A1 synthesis and hence resulting in HGF. Here, for the first time we identify the physiological role of ZNF862 for the association with the HGF.

Morphometric Analysis of the Lateral Atlantoaxial Joints in Patients with an Old Type II Odontoid Fracture and Atlantoaxial Dislocation: A Study Based on CT Analysis.

MINI: The morphological features of the lateral atlantoaxial joints (LAJs) in patients with old type II odontoid fractures and atlantoaxial dislocation have not been fully analyzed. Our study found the changes in morphological features of the LAJs in some patients, and revealed the causes and consequences of the changes in morphological features of the LAJs.

Retrospective cohort study. We aimed to study and interpret the morphological features of the lateral atlantoaxial joints (LAJs) in patients with old type II odontoid fractures and atlantoaxial dislocation (AAD). The causes and consequences of the morphological changes of the LAJs in patients with old type II odontoid fractures and AAD have not been analyzed before. A retrospective study was performed on patients with old type II odontoid fracture and AAD. These patients were placed in group A (unstable or reducible dislocation) or group B (irreducible or bony dislocation) depending on the type of dislocation they had. We documented the morphological changes and measured the inclination angle of the articular surface of the LAJs in computerized tomographic images and compared the results collected for the two groups. The association between the history of injury and the inclination angle of the articular surface of the LAJs was assessed using the Pearson correlation coefficient. A total of 29 patients were enrolled (16 patients in group A, and 13 patients in group B). The inclination angle in group A was significantly greater than that in group B ( P  < 0.001). Patients in group B were more likely to have fish-lip-like changes, dome-like changes, or collapse of the LAJs. Age, history, atlantodental interval, and Japanese Orthopedic Association score were also significant differences between the two groups ( P  < 0.05). There was a negative correlation between the history of injury and the inclination angle of the articular surfaces of the LAJs (left: r = −0.726, P  < 0.001; right: r = −0.795, P  < 0.001). The morphological changes of the LAJs could progressively become more pronounced during the evolution of the disease. Level of Evidence: 4.

Adsorption of fluorescently labeled protein residues on poly(ethylene-co-acrylic acid) films modified with affinity functionalities.

Poly(ethylene-co-acrylic acid) (EAA) films were reacted with glycine, 12-aminododecanoic acid, aspartic acid, 5-aminoisophthalic acid, ethanolamine, diethylamine, dimethylamine, N-isopropylamine, and dimethylaminoethyleneamine to prepare EAA films with negatively charged, non-charged, hydrophilic, and hydrophobic functionalities. Attenuated total reflectance Fourier transform infrared spectroscopy, differential scanning calorimetry, and contact angle measurements were used to characterize the modified EAA films. Analyses revealed that the films were modified on the surfaces and also in the bulk; therefore, bulk properties such as cohesive energy density were changed even though the surfaces remained hydrophobic. Adsorption studies were performed for two fluorescently labeled protein residues, dansyl-L-phenylalanine (dansyl-F) and dansyl-L-glutamine (dansyl-Q), from pH 7.4 buffer solutions. The adsorption results revealed that dimethylaminoethyleneamine functionality gave the highest uptake among the functionalities studied, and adsorption was more favorable for dansyl-F than dansyl-Q. Adsorption behavior is discussed in terms of hydrophobic-hydrophobic (dispersion) interactions and Coulombic interactions.

Robust polymer microfluidic device fabrication via contact liquid photolithographic polymerization (CLiPP).

Microfluidic devices are commonly fabricated in silicon or glass using micromachining technology or elastomers using soft lithography methods; however, invariable bulk material properties, limited surface modification methods and difficulty in fabricating high aspect ratio devices prevent these materials from being utilized in numerous applications and/or lead to high fabrication costs. Contact Liquid Photolithographic Polymerization (CLiPP) was developed as an alternative microfabrication approach that uniquely exploits living radical photopolymerization chemistry to facilitate surface modification of device components, fabrication of high aspect ratio structures from many different materials with numerous covalently-adhered layers and facile construction of three-dimensional devices. This contribution describes CLiPP and demonstrates unique advantages of this new technology for microfabrication of polymeric microdevices. Specifically, the procedure for fabricating devices with CLiPP is presented, the living radical photopolymerization chemistry which enables this technology is described, and examples of devices made using CLiPP are shown.

A highly sensitive electrochemical biosensor based on zinc oxide nanotetrapods for L-lactic acid detection.

An amperometric biosensor based on zinc oxide (ZnO) nanotetrapods was designed to detect L-lactic acid. The lactate oxidase was immobilized on the surface of ZnO nanotetrapods by electrostatic adsorption. Unlike traditional detectors, the special four-leg individual ZnO nanostructure, as an adsorption layer, provides multiterminal charge transfer channels. Furthermore, a large amount of ZnO tetrapods are randomly stacked to form a three-dimensional network naturally that facilitates the exchange of electrons and ions in the phosphate buffer solution. Utilizing amperometric response measurements, the prepared ZnO nanotetrapod L-lactic acid biosensor displayed a detection limit of 1.2 µM, a low apparent Michaelis-Menten constant of 0.58 mM, a high sensitivity of 28.0 µA cm(-2) mM(-1) and a good linear relationship in the range of 3.6 µM-0.6 mM for the L-lactic acid detection. This study shows that the biosensor based on ZnO tetrapod nanostructures is highly sensitive and able to respond rapidly in detecting lactic acid.