Effect of substrate material and abutment geometry on the accuracy of intraoral scanning: An in vitro study.

STATEMENT OF PROBLEM: Digital scanning is gradually replacing conventional impression making, but consensus on how tooth preparation influences the accuracy of intraoral scanning is lacking. PURPOSE: The purpose of this in vitro study was to evaluate the effect of substrate material and abutment geometry on the accuracy of digital casts obtained by intraoral scanning. MATERIAL AND METHODS: The height and total occlusal convergence (TOC) angle were measured in 5 different groups that contained 5 specimens of different materials: natural tooth, cobalt chromium alloy, titanium, zirconium dioxide ceramic, and resin. The specimens were scanned with an industrial scanner to obtain reference data. Each specimen was placed in a maxillary standard dentition model that was assembled in a head simulator. Each dentition model was scanned 10 times with an intraoral scanner (IOS) under operatory lighting conditions to acquire intraoral scanning files for each specimen. All data were imported into a metrology software program and processed. A total of 10 trueness deviations, the mean superimposition results between IOS scanning data and reference data, and precision deviations, the mean superimposition results between IOS scanning data in pairs, were recorded. Two-way analysis of variance (ANOVA) and Tukey multiple comparison test were used to analyze the accuracy of intraoral scanning in relation to the height or TOC angle of the abutment (α=.05). The total means of each substrate material were compared with the Kruskal-Wallis test and Dunn test for multiple comparisons. RESULTS: The accuracy of scanning images was related to material and abutment geometry (P<.05). Bias was larger as abutment height increased with most substrates. Larger TOC angles increased the accuracy of the digital scans. The trueness deviation of translucent materials and the precision deviation of reflective materials were generally larger. CONCLUSIONS: Substrate material and abutment geometry influence the accuracy of intraoral scanning. The accuracy of IOS generally tended to improve with decreasing height and increasing TOC angle and was affected by different substrates.

A signature of saliva-derived exosomal small RNAs as predicting biomarker for esophageal carcinoma: a multicenter prospective study.

BACKGROUND: The tRNA-derived small RNAs (tsRNAs) are produced in a nuclease-dependent manner in responses to variety of stresses that are common in cancers. We focus on a cancer-enriched tsRNA signature to develop a salivary exosome-based non-invasive biomarker for human esophageal squamous cell carcinoma (ESCC). METHODS: Cancer-enriched small RNAs were identified by RNA sequencing of salivary exosomes obtained from ESCC patients (n = 3) and healthy controls (n = 3) in a pilot study and further validated in discovery cohort (n = 66). A multicenter prospective observational study was conducted in two ESCC high-incidence regions (n = 320 and 200, respectively) using the newly developed biomarker signature. RESULTS: The tsRNA (tRNA-GlyGCC-5) and a previously undocumented small RNA were specifically enriched in salivary exosomes of ESCC patients, ESCC tissues and ESCC cells. The bi-signature composed of these small RNAs was able to discriminate ESCC patients from the controls with high sensitivity (90.50%) and specificity (94.20%). Based on the bi-signature Risk Score for Prognosis (RSP), patients with high-RSP have both shorter overall survival (OS) (HR 4.95, 95%CI 2.90-8.46) and progression-free survival (PFS) (HR 3.69, 95%CI 2.24-6.10) than those with low-RSP. In addition, adjuvant therapy improved OS (HR 0.47, 95%CI 0.29-0.77) and PFS (HR 0.36, 95%CI 0.21-0.62) only for patients with high but not low RSP. These findings are consistent in both training and validation cohort. CONCLUSIONS: The tsRNA-based signature not only has the potential for diagnosis and prognosis but also may serve as a pre-operative biomarker to select patients who would benefit from adjuvant therapy. TRIAL REGISTRATION: A prospective study of diagnosis biomarkers of esophageal squamous cell carcinoma, ChiCTR2000031507 . Registered 3 April 2016 - Retrospectively registered.

Retention and fatigue performance of modified polyetheretherketone clasps for removable prosthesis.

PURPOSE: Polyetheretherketone (PEEK) is considered as an alternative to metal material for removable partial denture (RPD). However, the retentive force is not strong as a metal RPD. This study investigated the retention and fatigue performance of PEEK clasps with different proportions of clasp arm engaging the undercut to verify a new strategy to improve their clinical performance. METHODS: Three groups (n = 10/group) of PEEK clasps with their terminal 1/3, 2/3 and the whole of retentive arms engaging the undercut were fabricated along with a group (n = 10) of conventional cobalt-chrome (CoCr) clasps as control group. Retentive forces were measured by universal testing machine initially and at an interval of 1500 cycles for a total of 15,000 fatigue cycles. The fatigue cycles were conducted by repeated insertion and removal of the clasp using fatigue testing machine. Each clasp was scanned by Trios3 scanner before and after fatigue test to obtain digital models. The deformation of the clasp was evaluated by root mean square (RMS) through aligning the two models in Geomagic wrap (2021). Scanning electron microscopy (SEM) and finite element analysis were carried out to observe the abrasion and the von Mises stress of the clasp arm. Kruskal-Wallis H test was used to compare the retentive forces and the RMSs of the studied groups followed by Bonferroni multiple comparisons. RESULTS: The whole of PEEK clasp arm engaging the undercut provided higher mean retentive forces (7.99 ± 2.02 N) than other PEEK clasp groups (P < 0.001) and was closer to CoCr clasps (11.88 ± 2.05 N). The RMSs of PEEK clasps were lower than CoCr clasps (P < 0.05) while the differences among PEEK clasps were of no statistical significance (P > 0.05). SEM showed that evidences of surface abrasion were observed on the section that engaged the undercut for all groups of clasps. The stress concentration mainly occurred on the initial part of the retentive arm. The maximum von Mises stress of each group was below the compressive strength of PEEK. CONCLUSIONS: Proportions of PEEK clasp arm engaging the undercut positively influenced the retentive force and the fatigue resistance of PEEK clasps was superior than CoCr clasps. It is a feasible method to improve the retention of PEEK clasps by increasing the proportion of clasp arm engaging the undercut. Clinical trials are needed to further verify this innovation.

The comparison genomics analysis with glioblastoma multiforme (GBM) cells under 3D and 2D cell culture conditions.

GBM, the most common and aggressive malignant primary brain tumors which needs new research approach to reveal the underline molecular mechanism of tumor progression. The 3D in vitro tumor model can be a simple and effective way to study tumor characteristics with ability to replicate of the tumor milieu. In the current study, we adopted the DNA microarray to analyze the gene expression of GBM tumor cells cultured under 2D cell culture flasks and 3D PLA porous scaffolds for 4,7 and 14 days. For 14 day old cultures, 8117 and 3060 genes expression were upregulated and downregulated respectively. Further KEGG pathway analysis revealed, the upregulated genes were mainly enriched/involved in PPAR and PI3K-Akt signaling pathways whereas the downregulated genes were mainly contributed in metabolism, ECM related and TGF-beta pathways. Thus, our approach of establishing 3D in vitro tumor model provides realistic results and proves itself a powerful tool for understanding the inner nature of GBM and can be considered as potential platform for drug screening.