Ring Repeating Unit: An Upgraded Structure Representation of Linear Condensation Polymers for Property Prediction.

Unique structure representation of polymers plays a crucial role in developing models for polymer property prediction and polymer design by data-centric approaches. Currently, monomer and repeating unit (RU) approximations are widely used to represent polymer structures for generating feature descriptors in the modeling of quantitative structure-property relationships (QSPR). However, such conventional structure representations may not uniquely approximate heterochain polymers due to the diversity of monomer combinations and the potential multi-RUs. In this study, the so-called ring repeating unit (RRU) method that can uniquely represent polymers with a broad range of structure diversity is proposed for the first time. As a proof of concept, an RRU-based QSPR model was developed to predict the associated glass transition temperature (Tg) of polyimides (PIs) with deterministic values. Comprehensive model validations including external, internal, and Y-random validations were performed. Also, an RU-based QSPR model developed based on the same large database of 1321 PIs provides nonunique prediction results, which further prove the necessity of RRU-based structure representation. Promising results obtained by the application of the RRU-based model confirm that the as-developed RRU method provides an effective representation that accurately captures the sequence of repeat units and thus realizes reliable polymer property prediction by data-driven approaches.

[Clinical characteristics of plastic bronchitis and risk factors for recurrence in children]. / å„¿ç«¥å¡‘åž‹æ€§æ”¯æ°”ç®¡ç‚Žä¸´åºŠç‰¹å¾åŠå¤å‘å±é™©å› ç´ åˆ†æž.

OBJECTIVES: To study the clinical characteristics of plastic bronchitis (PB) in children and investigate the the risk factors for recurrence of PB. METHODS: This was a retrospective analysis of medical data of children with PB who were hospitalized in Children's Hospital of Chongqing Medical University from January 2012 to July 2022. The children were divided into a single occurrence of PB group and a recurrent PB group and the risk factors for recurrence of PB were analyzed. RESULTS: A total of 107 children with PB were included, including 61 males (57.0%) and 46 females (43.0%), with a median age of 5.0 years, and 78 cases (72.9%) were over 3 years old. All the children had cough, 96 children (89.7%) had fever, with high fever in 90 children. Seventy-three children (68.2%) had shortness of breath, and 64 children (59.8%) had respiratory failure. Sixty-six children (61.7%) had atelectasis and 52 children (48.6%) had pleural effusion. Forty-seven children (43.9%) had Mycoplasma pneumoniae infection, 28 children (26.2%) had adenovirus infection, and 17 children (15.9%) had influenza virus infection. Seventy-one children (66.4%) had a single occurrence of PB, and 36 cases (33.6%) had recurrent occurrence of PB (≥2 times). Multivariate logistic regression analysis showed that involvement of ≥2 lung lobes (OR=3.376) under bronchoscopy, continued need for invasive ventilation after initial removal of plastic casts (OR=3.275), and concomitant multi-organ dysfunction outside the lungs (OR=2.906) were independent risk factors for recurrent occurrence of PB (P<0.05). CONCLUSIONS: Children with pneumonia accompanied by persistent high fever, shortness of breath, respiratory failure, atelectasis or pleural effusion should be highly suspected with PB. Involvement of ≥2 lung lobes under bronchoscopy, continued need for invasive ventilation after initial removal of plastic casts, and concomitant multi-organ dysfunction outside the lungs may be risk factors for recurrent occurrence of PB.

Recent Progress in Macromolecule-Anchored Hybrid Gold Nanomaterials for Biomedical Applications.

Gold nanoparticles (AuNPs), with elegant thermal, optical, or chemical properties due to quantum size effects, may serve as unique species for therapeutic or diagnostic applications. It is worth mentioning that their small size also results in high surface activity, leading to significantly impaired stability, which greatly hinders their biomedical utilizations. To overcome this problem, various types of macromolecular materials are utilized to anchor AuNPs so as to achieve advanced synergistic effect by dispersing, protecting, and stabilizing the AuNPs in polymeric-Au hybrid self-assemblies. In this review, the most recent development of polymer-AuNP hybrid systems, including AuNPs@polymeric nanoparticles, AuNPs@polymeric micelle, AuNPs@polymeric film, and AuNPs@polymeric hydrogel are discussed with respect to their different synthetic strategies. These sophisticated materials with diverse functions, oriented toward biomedical applications, are further summarized into several active domains in the areas of drug delivery, gene delivery, photothermal therapy, antibacterials, bioimaging, etc. Finally, the possible approaches for future design of multifunctional polymer-AuNP hybrids by combining hybrid chemistry with biological interface science are proposed.

Cementless Total Hip Arthroplasty With a High Hip Center for Hartofilakidis Type B Developmental Dysplasia of the Hip: Results of Midterm Follow-Up.

BACKGROUND: Acetabular reconstruction in adults with Hartofilakidis type B developmental dysplasia of the hip is a major technical challenge. The purpose of this retrospective study was to evaluate hip function and radiographic outcomes regarding high hip center at midterm follow-up. METHODS: From January 1, 2007 to December 31, 2009, 37 patients who had Hartofilakidis type B developmental dysplasia of the hip underwent a primary total hip arthroplasty using a high hip center technique. Functional, radiographic, and survivorship outcomes were evaluated. RESULTS: Of the 37 patients, 31 patients (83.8%) were available for the mean follow-up of 6.1 years (range, 1.5-7.6 years). Thirty-one cementless cups were located at an average vertical distance of 38.1 ± 3.3 mm and at a mean horizontal distance of 35.5 ± 3.4 mm. The mean ratio of the height of the hip center was 2.4% (range, 2.0%-2.9%). The Harris Hip Scores were improved from 50.3 points (range, 38-63 points) preoperatively to 92.3 points (range, 85-100 points) at the final follow-up (P < .001). Four patients continued to present with Trendelenburg gait pattern at the last follow-up. With use of revision for any reason and aseptic loosening as the end point, the 5-year survival rates were 90.3% (95% CI, 79.9%-100%) and 93.3% (95% CI, 84.3%-100%), respectively. CONCLUSIONS: The high hip center technique in conjunction with a cementless acetabular component seems to be a valuable alternative to achieve satisfactory midterm outcomes for Hartofilakidis type B developmental dysplasia of the hip.

[Influence of alveolar bone heights on fracture resistance and pattern of post and core restored maxillary premolars].

OBJECTIVE: To evaluate the influence of different alveolar bone heights on fracture resistance and pattern of post and core restored maxillary premolars. METHODS: Forty-eight maxillary premolars were randomly divided into 6 groups (8 teeth in each group) for different alveolar bone heights and different post and core materials. Group A: fiber post and core and normal alveolar bone height. Group B: Ni-Cr cast post and core and normal alveolar bone height. Group C: fiber post and core with 2 mm alveolar bone height reduction. Group D: Ni-Cr cast post and core with 2 mm alveolar bone height reduction. Group E: fiber post and core with 4 mm alveolar bone height reduction. Group F: Ni-Cr cast post and core with 4 mm alveolar bone height reduction. All of the teeth were restored with Ni-Cr cast crowns. Fracture resistances were tested and the failure modes were examined. RESULTS: The mean fracture resistances were (762.49 ± 84.91) N for group A, (794.26 ± 72.61) N for group B, (517.69 ± 80.30) N for group C, (543.50 ± 62.88) N for group D, (219.91 ± 43.20) N for group E, and (196.16 ± 41.08) N for group F. The ratios of favorable fractures were 100.0% for group A, 37.5% for group B, 75.0% for group C, 12.5% for group D, 50.0% for group E, and 0 for group F. CONCLUSION: The alveolar bone height has a significant impact on fracture resistance and modes of post and core restored maxillary premolars. With the reduction of alveolar bone height, the fracture decreases and the fracture mode tends to be unfavorable.

Recent advances in biomaterial designs for assisting CAR-T cell therapy towards potential solid tumor treatment.

Chimeric antigen receptor T (CAR-T) cells have shown promising outcomes in the treatment of hematologic malignancies. However, CAR-T cell therapy in solid tumor treatment has been significantly hindered, due to the complex manufacturing process, difficulties in proliferation and infiltration, lack of precision, or poor visualization ability. Fortunately, recent reports have shown that functional biomaterial designs such as nanoparticles, polymers, hydrogels, or implantable scaffolds might have potential to address the above challenges. In this review, we aim to summarize the recent advances in the designs of functional biomaterials for assisting CAR-T cell therapy for potential solid tumor treatments. Firstly, by enabling efficient CAR gene delivery in vivo and in vitro, functional biomaterials can streamline the difficult process of CAR-T cell therapy manufacturing. Secondly, they might also serve as carriers for drugs and bioactive molecules, promoting the proliferation and infiltration of CAR-T cells. Furthermore, a number of functional biomaterial designs with immunomodulatory properties might modulate the tumor microenvironment, which could provide a platform for combination therapies or improve the efficacy of CAR-T cell therapy through synergistic therapeutic effects. Last but not least, the current challenges with biomaterials-based CAR-T therapies will also be discussed, which might be helpful for the future design of CAR-T therapy in solid tumor treatment.

Mechanistic insights into the effect of drug content on adhesive properties of transdermal patch containing lidocaine.

This study aims to shed light on the relationship between drug content and adhesive properties in drug-in-adhesive transdermal patch, and to elucidate molecular mechanisms from the perspective of polymer chain mobility. Lidocaine was selected as model drug. Two acrylate pressure sensitive adhesives (PSAs) with different polymer chain mobility were synthesized. Tack adhesion, shear adhesion and peel adhesion of PSAs with 0, 5%, 10%, 15% and 20% w/w lidocaine contents were tested. Polymer chain mobility was determined by rheology and modulated differential scanning calorimetry experiments. Drug-PSA interaction was analyzed by FT-IR. The effect of drug content on free volume of PSA were determined by positron annihilation lifetime spectroscopy and molecular dynamics simulation. It was found that the polymer chain mobility of PSA was increased with increasing drug content. Due to the variation of polymer chain mobility, tack adhesion increased, and shear adhesion decreased. It was proved that interactions between polymer chains were destroyed by drug-PSA interactions, free volume between polymer chains was expanded, resulting in the increase of polymer chain mobility. We can conclude that the effect of drug content on polymer chain mobility should be considered, when designing a transdermal drug delivery system with controlled and satisfactory adhesion.

Multi-functional nanogel with cascade catalytic performance for treatment of diabetic oral mucosa ulcer.

Introduction: Diabetic oral mucosa ulcers face challenges of hypoxia, hyperglycemia and high oxidative stress, which result in delayed healing process. Oxygen is regarded as an important substance in cell proliferation, differentiation and migration, which is beneficial to ulcer recovery. Methods: This study developed a multi-functional GOx-CAT nanogel (GCN) system for the treatment of diabetic oral mucosa ulcers. The catalytic activity, ROS scavenge and oxygen supply ability of GCN was validated. The therapeutic effect of GCN was verified in the diabetic gingival ulcer model. Results: The results showed that the nanoscale GCN was capable of significantly eliminating intracellular ROS, increasing intracellular oxygen concentration and accelerating cell migration of human gingival fibroblasts, which could promote diabetic oral gingival ulcer healing in vivo by alleviating inflammation and promoting angiogenesis. Discussion: This multifunctional GCN with ROS depletion, continuous oxygen supply and good biocompatibility, which might provide a novel therapeutic strategy for effective treatment of diabetic oral mucosa ulcers.

Anti-photoaging effect and mechanism of flexible liposomes co-loaded with apigenin and doxycycline.

Prolonged exposure to UV light can lead to photo-ageing of the skin. Therefore, the development and application of anti-photoaging drugs is urgent. In this study, we co-loaded apigenin (Apn) and doxycycline (Doc), a broad-spectrum inhibitor of matrix metalloproteinases (MMPs), into flexible liposomes to exert anti-photoaging effects by combating oxidative stress, anti-inflammation, reducing the activation of MMPs and preventing collagen loss. The results showed that we prepared a flexible liposome (A/D-FLip) containing Apn and Doc. Its appearance, particle size and Zeta potential were normal and it had good encapsulation efficiency, drug loading, in vitro release and transdermal efficiency. In cellular experiments, A/D-FLip could inhibit oxidative stress damage, reduce inflammatory factors and decrease the activation of MMPs in Human immortalized keratinocytes (HaCaT) cells; in animal experiments, A/D-FLip could inhibit skin damage and reduce skin collagen loss by decreasing the activation of MMPs, thus inhibiting skin photoaging in mice. In conclusion, A/D-FLip has good anti-photoaging effects and it has the potential to become an effective skin care product or drug against UV damage and skin photoaging in the future.

Effects of modified atmosphere packaging on the postharvest quality of mulberry leaf vegetable.

Fresh mulberry leaf vegetable is nutritive and becoming popular. However, available preservation technologies are deficient. In present work, the effects of two kinds of modified atmosphere packaging on postharvest quality of fresh mulberry leaf vegetable stored at 4 °C were evaluated. The respiration rate of samples in the modified polyethylene packages (MP20) was 12.88-22.65% lower than that in normal polyethylene packaging (CK). The content of total soluble solids, soluble protein, and total polyphenol in MP20 was less changed than that in CK, and the vitamin C retention was higher as well. Moreover, the lignin content in MP20 was lower than that in CK during storage (19.79% vs 13.38% at day 8), and that was significantly positively related to the polyphenol oxidase and peroxidase activities inhibition. Taken together, a packaging with moderate gas permeability (MP20) is suitable for nutrition maintenance and lignification inhibition of fresh mulberry leaf vegetable during cold storage.

Oxygen self-supplied enzyme nanogels for tumor targeting with amplified synergistic starvation and photodynamic therapy.

Tumor tissues need vast supply of nutrients and energy to sustain the rapid proliferation of cancer cells. Cutting off the glucose supply represents a promising cancer therapy approach. Herein, a tumor tissue-targeted enzyme nanogel (rGCP nanogel) with self-supply oxygen capability was developed. The enzyme nanogel synergistically enhanced starvation therapy and photodynamic therapy (PDT) to mitigate the rapid proliferation of cancer cells. The rGCP nanogel was fabricated by copolymerizing two monomers, porphyrin and cancer cells-targeted, Arg-Gly-Asp (RGD), onto the glucose oxidase (GOX) and catalase (CAT) surfaces. The cascade reaction within the rGCP nanogel could efficiently consume intracellular glucose catalyzed by GOX. Concurrently, CAT safely decomposed the produced H2O2 with systemic toxicity to promote oxygen generation and achieved low toxicity starvation therapy. The produced oxygen subsequently facilitated the glucose oxidation reaction and significantly enhanced the generation of cytotoxic singlet oxygen (1O2) in the presence of 660 nm light irradiation. Combining starvation therapy and PDT, the designed enzyme nanogel system presented an amplified synergic cancer therapy effect. This approach potentially paved a new way to fabricate a combinatorial therapy approach by employing cascaded catalytic nanomedicines with good tumor selectivity and efficient anti-cancer effect. STATEMENT OF SIGNIFICANCE: The performance of starvation and photodynamic therapy (PDT) is usually suppressed by intrinsic tumorous hypoxia. Herein, an oxygen self-supplied and tumor tissue-targeted enzyme nanogel was created by copolymerization of two monomers, porphyrin and cancer cell-targeted Arg-Gly-Asp (RGD), onto the surface of glucose oxidase (GOX) and catalase (CAT), which synergistically enhanced starvation therapy and PDT. Moreover, the enzyme nanogels possessed high stability and could be synthesized straightforwardly. This anti-cancer system provides an approach for constructing a combinatorial therapy approach by employing cascaded catalytic nanomedicine with good tumor selectivity and therapeutic efficacy.

Mitochondria targeted composite enzyme nanogels for synergistic starvation and photodynamic therapy.

Mitochondria, as the energy factory of cells, often maintain a high redox state, and play an important role in cell growth, development and apoptosis. Therefore, the destruction of mitochondrial redox homeostasis has now become an important direction for cancer treatment. Here, we design a mitochondrial targeting composite enzyme nanogel bioreactor with a circulating supply of O2 and H2O2, which is composed of mitochondrial target triphenylphosphine (TPP), natural enzymes glucose oxidase (GOX) and catalase (CAT), and protoporphyrin IX (PpIX). The nanogel can effectively increase the stability of the natural enzymes, and its size of about 65 nm makes them close in space, which greatly improves their cascade catalytic efficiency and safety. Under the action of target TPP, the system can accurately target the mitochondria of breast cancer 4T1 cells, catalyze intracellular glucose to generate H2O2 through GOX, and H2O2 is further used as a catalytic substrate for CAT to generate O2. This O2 can not only further improve the catalytic efficiency of GOX, but also provide raw materials for the production of ROS in PDT, which can effectively destroy the mitochondria of cancer cells, thereby causing tumor cell apoptosis. Compared with GOX alone, thanks to the close spatial position of the composite enzymes, the composite enzyme nanogel can quickly consume the highly oxidative H2O2 produced by GOX, thereby showing better safety to normal cells. In addition, the composite enzyme group under light showed excellent antitumor effects by combining starvation therapy and PDT under adequate oxygen supply in animal experiments. In general, this composite enzyme nanogel system with good stability, high safety and excellent cascade catalytic efficiency opens a new way for the development of safe and efficient cancer therapeutics.

Mechanism insight on drug skin delivery from polyurethane hydrogels: Roles of molecular mobility and intermolecular interaction.

Though polyurethane (PU) hydrogel had great potential in topical drug delivery system, drug skin delivery behavior from hydrogel and the underlying molecular mechanism were still unclear. In this study, PU and Carbomer (CP as control) hydrogels were prepared with lidocaine (LID) and ofloxacin (OFX) as model drugs. In vitro skin permeation and tissue distribution study were conducted to evaluate the drug delivery behaviors. The underlying molecular mechanisms were characterized by drug release with octanol as release medium, rheological study, ATR-FTIR, NMR, and molecular simulation. The results showed that the skin permeation amount of LID-PU (45.50 ± 7.12 µg) was lower than LID-CP (45.50 ± 7.12 µg). And the LID diffusion coefficient of PU (26.21 µg/h0.5) was also lower than CP (31.30 µg/h0.5), which attributed to H-bonding between LID (-CONH) and PU (-NHCOO). However, the OFX-PU showed a higher skin permeation amount (10.06 ± 1.29 µg) than OFX-CP (5.28 ± 1.39 µg). And the OFX-PU also showed a higher diffusion coefficient (30.0 µg/h0.5) than OFX-CP (21.37 µg/h0.5), which was caused by increased mobility of hydrogel when interaction action site was C-O-C in PU. In conclusion, drug skin delivery behavior from PU hydrogel was controlled by molecular mobility and intermolecular interaction, which clarified the influence of the functional group of PU hydrogel on drug skin delivery behavior and broadened our understanding of PU hydrogel application in topical drug delivery system.

AuNPs Decorated PLA Stereocomplex Micelles for Synergetic Photothermal and Chemotherapy.

A unique platform for combined photothermal and chemotherapy using PLA stereocomplex (PLA SC) micelles-induced hybrid gold nanocarriers is designed. The PLA SC micelles, made from the self-assembly of poly(ethylene glycol)-block-poly(l-lactide) (PEG-PLLA) and poly(2-(dimethylamino) ethyl methacrylate)-block-poly(d-lactide) (PDMAEMA-PDLA), for the first time are used as a template to fabricate the hybrid PLA SC@Au core-shell nanocarriers, in which the anticancer drugs are encapsulated within the core, while the Au nanoparticles are tethered in the shell via the in situ reduction of AuCl4- by PDMAEMA. The obtained PLA SC@Au hybrid nanocarriers exhibit low toxicity and remarkable photothermal effect. Upon near-infrared laser irradiation, the on-site photothermal therapy can further induce an accelerated drug release from the hybrid nanocarrier reservoir via hyperthermia heating of the nanocarriers, thus leading to a synergistic photothermal and chemotherapy toward a significantly improved efficacy in tumor shrinkage. The as-designed PLA SC@Au hybrid nanocarriers, with their biocompatible compositions, dual-drug delivery characteristics, and combined photothermal/chemotherapy, show high potential as a novel platform for cancer treatment.

Thermogelling chitosan-based polymers for the treatment of oral mucosa ulcers.

Current treatments for oral mucosa-related ulcers use drugs to relieve pain and promote healing, but rarely consider drug resistance to bacterial infection in the microenvironment of the oral cavity or the prevention of bleeding from gingival mucosa ulcers. We herein report an injectable, thermogelling chitosan-based system to address these concerns. An aqueous solution of chitosan-based conjugates (chitosan-g-poly(N-isopropylacrylamide) [CS-g-PNIPAAM] including 1a [CS-g-PNIPAAM with less PNIPAAM] and 1b [CS-g-PNIPAAM with more PNIPAAM], and chitosan-g-poly(N-isopropylacrylamide)-g-polyacrylamide [CS-g-PNIPAAM-g-PAM] 3) could reversibly form semi-solid gels at physiological temperatures for easy application to oral cavity ulcer sites by injection. The chitosan-based conjugate thermogels prepared could inhibit both Gram-positive and Gram-negative bacteria and the two with higher chitosan and poly(N-isopropylacrylamide) contents (1a and 1b) promoted proliferation of gingival fibroblasts in vitro. These two thermogels also exhibited improved blood clotting in an in vivo rat study. Thermogels 1a and 1b effectively promoted ulcer healing and shortened ulcer healing times in an oral gingival mucosa ulcer model using Sprague Dawley (SD) rats. These thermogels showed no obvious toxicity to the main organs of SD rats undergoing gingival ulcer treatment. These results suggest that this antibacterial biomaterial could be a promising injectable therapeutic agent for the treatment for oral mucosa ulcers.

Recent Progress in Polyhydroxyalkanoates-Based Copolymers for Biomedical Applications.

In recent years, naturally biodegradable polyhydroxyalkanoate (PHA) monopolymers have become focus of public attentions due to their good biocompatibility. However, due to its poor mechanical properties, high production costs, and limited functionality, its applications in materials, energy, and biomedical applications are greatly limited. In recent years, researchers have found that PHA copolymers have better thermal properties, mechanical processability, and physicochemical properties relative to their homopolymers. This review summarizes the synthesis of PHA copolymers by the latest biosynthetic and chemical modification methods. The modified PHA copolymer could greatly reduce the production cost with elevated mechanical or physicochemical properties, which can further meet the practical needs of various fields. This review further summarizes the broad applications of modified PHA copolymers in biomedical applications, which might shred lights on their commercial applications.

Light-Induced Redox-Responsive Smart Drug Delivery System by Using Selenium-Containing Polymer@MOF Shell/Core Nanocomposite.

Rational design of controllable drug release systems is important for tumor treatments due to the nonspecific toxicity of many chemotherapeutics. Herein, laser or light responsive pharmaceutical delivery nanoparticles are designed, by taking the advantages of redox responsive selenium (Se) substituted polymer as shell and photosensitive porphyrin zirconium metal-organic frameworks (MOF) as core. In detail, redox cleavable di-(1-hydroxylundecyl) selenide (DH-Se), biocompatible poly(ethylene glycol) (PEG), and poly(propylene glycol) (PPG) are randomly polymerized to form poly(DH-Se/PEG/PPG urethane), which is used to coat the reactive oxygen species' (ROS) producible porous porphyrin zirconium metal organization formulation (PCN-224 MOF) to form the final poly(DH-Se/PEG/PPG urethane)@MOF shell-core nanoparticle with spherical shape by emulsion approach. Interestingly, poly(DH-Se/PEG/PPG urethane)@MOF nanoparticles with loading of chemotherapeutic doxorubicin (DOX) experience a fast and controllable release, which can realize the combination of chemotherapy and photodynamic therapy upon irradiation with laser light, due to the light-triggered ROS production by MOF which further causes the cleavage of poly(DH-Se/PEG/PPG urethane) polymer chain and the release of encapsulated DOX. To the best of the authors' knowledge, this is the first design of utilizing MOF and selenium substituted polymer as controllable drug release carriers, which might be beneficial for precise chemotherapy and photodynamic therapy combination.

Surfactant Free Delivery of Docetaxel by Poly[(R)-3-hydroxybutyrate-(R)-3-hydroxyhexanoate]-Based Polymeric Micelles for Effective Melanoma Treatments.

Docetaxel (DTX) is a new semisynthetic chemical in the taxoid family and serves a wide spectrum of chemotherapeutics. Current commercial formulation of DTX is based on the addition of the nonionic surfactants (i.e., ethanol and Tween 80), which are reported to cause severe hemolysis, hypersensitivity reactions, or neurotoxic toxicity and greatly hinders patient tolerance or compliance. In this report, a novel low-toxic, biodegradable, and amphiphilic poly[(R)-3-hydroxybutyrate-(R)-3-hydroxyhexanoate] (PHBHx)-based polyurethane (a copolymer made of hydrophobic PHBHx with biocompatible D-3-hydroxybutyric acid as degradation product, thermosensitive polypropylene glycol (PPG), and hydrophilic polyethylene glycol (PEG) segments) with nanosized micelle formation ability to encapsulate DTX, as a surfactant free formulation, is reported. Interestingly, this DTX-loaded poly(PHBHx/PEG/PPG urethane) micelle formulation with >90% drug loading efficiency shows significantly improved DTX solubility in aqueous medium, reduced hemolysis for better blood compatibility, and increased drug uptake in A375 melanoma cells, which provides the possibility of systematic delivery of DTX. As a proof-of-concept, an A375 melanoma xenograft mouse model is established to verify the therapeutic effect of this DTX-loaded poly(PHBHx/PEG/PPG urethane) micelle formulation, indicating the promising application of PHBHx-based polymeric nanosized micelle as a surfactant free formulation of chemotherapeutics which might greatly be beneficial for controllable delivery of pharmaceutics and cancer therapy.

Smart Fiber Membrane for pH-Induced Oil/Water Separation.

Wastewater contaminated with oil or organic compounds poses threats to the environment and humans. Efficient separation of oil and water are highly desired yet still challenging. This paper reports the fabrication of a smart fiber membrane by depositing pH-responsive copolymer fibers on a stainless steel mesh through electrospinning. The cost-effective precursor material poly(methyl methacrylate)-block-poly(4-vinylpyridine) (PMMA-b-P4VP) was synthesized using copper(0)-mediated reversible-deactivation radical polymerization. The pH-responsive P4VP and the underwater oleophilic/hydrophilic PMMA confer the as-prepared membrane with switchable surface wettability toward water and oil. The three-dimensional network structure of the fibers considerably strengthens the oil/water wetting property of the membrane, which is highly desirable in the separation of oil and water mixtures. The as-prepared fiber membrane accomplishes gravity-driven pH-controllable oil/water separations. Oil selectively passes through the membrane, whereas water remains at the initial state; after the membrane is wetted with acidic water (pH 3), a reverse separation is realized. Both separations are highly efficient, and the membrane also exhibits switchable wettability after numerous cycles of the separation process. This cost-effective and easily mass-produced smart fiber membrane with excellent oil-fouling repellency has significant potential in practical applications, such as water purification and oil recovery.